2.21.2

po/zh_HK.po

@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: glib 2.19.9\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 23:29-0400\n"
+"POT-Creation-Date: 2009-06-15 12:58-0400\n"
 "PO-Revision-Date: 2009-02-25 20:26+0800\n"
 "Last-Translator: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>\n"
 "Language-Team: Chinese (Hong Kong) <community@linuxhall.org>\n"
@@ -185,7 +185,7 @@ msgstr "讀取檔案‘%s’失敗：%s"
 msgid "Failed to open file '%s': %s"
 msgstr "開啟檔案「%s」失敗：%s"
 
-#: glib/gfileutils.c:712 glib/gmappedfile.c:133
+#: glib/gfileutils.c:712 glib/gmappedfile.c:138
 #, c-format
 msgid "Failed to get attributes of file '%s': fstat() failed: %s"
 msgstr "獲取檔案‘%s’的屬性失敗：fstat() 失敗：%s"
@@ -246,6 +246,12 @@ msgstr "樣式‘%s’無效，不應含有‘%s’"
 msgid "Template '%s' doesn't contain XXXXXX"
 msgstr "檔案樣式‘%s’沒有包含 XXXXXX"
 
+#: glib/gfileutils.c:1734
+#, c-format
+msgid "%u byte"
+msgid_plural "%u bytes"
+msgstr[0] "%u 位元組"
+
 #: glib/gfileutils.c:1742
 #, c-format
 msgid "%.1f KB"
@@ -291,12 +297,12 @@ msgstr "在字符未完整之前，輸入管道已經結束"
 msgid "Can't do a raw read in g_io_channel_read_to_end"
 msgstr "g_io_channel_read_to_end 中無法讀取原始資料"
 
-#: glib/gmappedfile.c:116
+#: glib/gmappedfile.c:121
 #, c-format
 msgid "Failed to open file '%s': open() failed: %s"
 msgstr "開啟檔案‘%s’失敗：open() 失敗：%s"
 
-#: glib/gmappedfile.c:193
+#: glib/gmappedfile.c:198
 #, c-format
 msgid "Failed to map file '%s': mmap() failed: %s"
 msgstr "對應檔案‘%s’失敗：mmap() 失敗：%s"
@@ -365,31 +371,31 @@ msgstr ""
 "實體的結束部分不是分號；很可能你想使用 & 字符但未將它變為實體 ─ 請將 & 轉換"
 "為 &amp;"
 
-#: glib/gmarkup.c:973
+#: glib/gmarkup.c:1014
 msgid "Document must begin with an element (e.g. <book>)"
 msgstr "文件開始必須為一元素（例如 <book>）"
 
-#: glib/gmarkup.c:1013
+#: glib/gmarkup.c:1054
 #, c-format
 msgid ""
 "'%s' is not a valid character following a '<' character; it may not begin an "
 "element name"
 msgstr "‘<’字符後的‘%s’不是有效的字符；這樣不可能是元素名稱的開始部份"
 
-#: glib/gmarkup.c:1081
+#: glib/gmarkup.c:1122
 #, c-format
 msgid ""
 "Odd character '%s', expected a '>' character to end the empty-element tag '%"
 "s'"
 msgstr "字符「%s」只有一半，空元素標籤「%s」的結尾應該以‘>’字符結束"
 
-#: glib/gmarkup.c:1165
+#: glib/gmarkup.c:1206
 #, c-format
 msgid ""
 "Odd character '%s', expected a '=' after attribute name '%s' of element '%s'"
 msgstr "不尋常的字符‘%s’，屬性名稱‘%s’（屬於元素‘%s’）後應該是‘=’字符"
 
-#: glib/gmarkup.c:1206
+#: glib/gmarkup.c:1247
 #, c-format
 msgid ""
 "Odd character '%s', expected a '>' or '/' character to end the start tag of "
@@ -399,7 +405,7 @@ msgstr ""
 "不尋常的字符‘%s’，元素‘%s’的開始標籤應該以‘>’或‘/’字符終結，也可以是屬性；或"
 "許你在屬性名稱中使用了無效的字符"
 
-#: glib/gmarkup.c:1283
+#: glib/gmarkup.c:1291
 #, c-format
 msgid ""
 "Odd character '%s', expected an open quote mark after the equals sign when "
@@ -407,80 +413,80 @@ msgid ""
 msgstr ""
 "不尋常的字符‘%s’，當指定屬性‘%s’的值（屬於元素‘%s’）時，等號後應該出現開引號"
 
-#: glib/gmarkup.c:1417
+#: glib/gmarkup.c:1425
 #, c-format
 msgid ""
 "'%s' is not a valid character following the characters '</'; '%s' may not "
 "begin an element name"
 msgstr "‘</’字符後的‘%s’不是有效的字符；‘%s’不可能是元素名稱的開始部份"
 
-#: glib/gmarkup.c:1453
+#: glib/gmarkup.c:1461
 #, c-format
 msgid ""
 "'%s' is not a valid character following the close element name '%s'; the "
 "allowed character is '>'"
 msgstr "字符‘%s’是無效的（位置在關閉元素‘%s’末端）；允許的字符為「>」"
 
-#: glib/gmarkup.c:1464
+#: glib/gmarkup.c:1472
 #, c-format
 msgid "Element '%s' was closed, no element is currently open"
 msgstr "元素‘%s’已關閉，沒有開啟中的元素"
 
-#: glib/gmarkup.c:1473
+#: glib/gmarkup.c:1481
 #, c-format
 msgid "Element '%s' was closed, but the currently open element is '%s'"
 msgstr "元素‘%s’已關閉，但開啟中的元素是‘%s’"
 
-#: glib/gmarkup.c:1640
+#: glib/gmarkup.c:1648
 msgid "Document was empty or contained only whitespace"
 msgstr "文件完全空白或只含有空白字符"
 
-#: glib/gmarkup.c:1654
+#: glib/gmarkup.c:1662
 msgid "Document ended unexpectedly just after an open angle bracket '<'"
 msgstr "文件在尖角括號‘<’後突然終止"
 
-#: glib/gmarkup.c:1662 glib/gmarkup.c:1707
+#: glib/gmarkup.c:1670 glib/gmarkup.c:1715
 #, c-format
 msgid ""
 "Document ended unexpectedly with elements still open - '%s' was the last "
 "element opened"
 msgstr "在仍然有開啟中的元素時，文件突然結束 ─‘%s’是最後一個開啟的元素"
 
-#: glib/gmarkup.c:1670
+#: glib/gmarkup.c:1678
 #, c-format
 msgid ""
 "Document ended unexpectedly, expected to see a close angle bracket ending "
 "the tag <%s/>"
 msgstr "文件突然結束，本來應該出現用來關閉標籤 <%s/> 的尖角括號"
 
-#: glib/gmarkup.c:1676
+#: glib/gmarkup.c:1684
 msgid "Document ended unexpectedly inside an element name"
 msgstr "在元素的名稱內，文件突然結束"
 
-#: glib/gmarkup.c:1682
+#: glib/gmarkup.c:1690
 msgid "Document ended unexpectedly inside an attribute name"
 msgstr "在屬性名稱內，文件突然結束"
 
-#: glib/gmarkup.c:1687
+#: glib/gmarkup.c:1695
 msgid "Document ended unexpectedly inside an element-opening tag."
 msgstr "在元素的開啟標籤內，文件突然結束"
 
-#: glib/gmarkup.c:1693
+#: glib/gmarkup.c:1701
 msgid ""
 "Document ended unexpectedly after the equals sign following an attribute "
 "name; no attribute value"
 msgstr "在屬性名稱的等號後，文件突然結束；沒有屬性值"
 
-#: glib/gmarkup.c:1700
+#: glib/gmarkup.c:1708
 msgid "Document ended unexpectedly while inside an attribute value"
 msgstr "在屬性值內，文件突然結束"
 
-#: glib/gmarkup.c:1716
+#: glib/gmarkup.c:1724
 #, c-format
 msgid "Document ended unexpectedly inside the close tag for element '%s'"
 msgstr "在元素‘%s’的關閉標籤內，文件突然結束"
 
-#: glib/gmarkup.c:1722
+#: glib/gmarkup.c:1730
 msgid "Document ended unexpectedly inside a comment or processing instruction"
 msgstr "在註解或處理指示內，文件突然結束"
 
@@ -974,108 +980,108 @@ msgstr "缺少 %s 的參數"
 msgid "Unknown option %s"
 msgstr "未知的選項 %s"
 
-#: glib/gkeyfile.c:358
+#: glib/gkeyfile.c:362
 msgid "Valid key file could not be found in search dirs"
 msgstr "在資料目錄中找不到有效的設定鍵檔案"
 
-#: glib/gkeyfile.c:393
+#: glib/gkeyfile.c:397
 msgid "Not a regular file"
 msgstr "不是正規的檔案"
 
-#: glib/gkeyfile.c:401
+#: glib/gkeyfile.c:405
 msgid "File is empty"
 msgstr "檔案是空白的"
 
-#: glib/gkeyfile.c:761
+#: glib/gkeyfile.c:765
 #, c-format
 msgid ""
 "Key file contains line '%s' which is not a key-value pair, group, or comment"
 msgstr "設定鍵檔案中‘%s’行並非設定鍵值配對、羣組或註解"
 
-#: glib/gkeyfile.c:821
+#: glib/gkeyfile.c:825
 #, c-format
 msgid "Invalid group name: %s"
 msgstr "無效的羣組名稱：%s"
 
-#: glib/gkeyfile.c:843
+#: glib/gkeyfile.c:847
 msgid "Key file does not start with a group"
 msgstr "設定鍵檔案並非以羣組開頭"
 
-#: glib/gkeyfile.c:869
+#: glib/gkeyfile.c:873
 #, c-format
 msgid "Invalid key name: %s"
 msgstr "無效的設定鍵名稱：%s"
 
-#: glib/gkeyfile.c:896
+#: glib/gkeyfile.c:900
 #, c-format
 msgid "Key file contains unsupported encoding '%s'"
 msgstr "設定鍵檔案包含不支援的編碼‘%s’"
 
-#: glib/gkeyfile.c:1112 glib/gkeyfile.c:1274 glib/gkeyfile.c:2503
-#: glib/gkeyfile.c:2569 glib/gkeyfile.c:2704 glib/gkeyfile.c:2837
-#: glib/gkeyfile.c:2990 glib/gkeyfile.c:3177 glib/gkeyfile.c:3238
+#: glib/gkeyfile.c:1116 glib/gkeyfile.c:1278 glib/gkeyfile.c:2507
+#: glib/gkeyfile.c:2573 glib/gkeyfile.c:2708 glib/gkeyfile.c:2841
+#: glib/gkeyfile.c:2994 glib/gkeyfile.c:3181 glib/gkeyfile.c:3242
 #, c-format
 msgid "Key file does not have group '%s'"
 msgstr "設定鍵檔案沒有羣組‘%s’"
 
-#: glib/gkeyfile.c:1286
+#: glib/gkeyfile.c:1290
 #, c-format
 msgid "Key file does not have key '%s'"
 msgstr "設定鍵檔案沒有設定鍵‘%s’"
 
-#: glib/gkeyfile.c:1393 glib/gkeyfile.c:1508
+#: glib/gkeyfile.c:1397 glib/gkeyfile.c:1512
 #, c-format
 msgid "Key file contains key '%s' with value '%s' which is not UTF-8"
 msgstr "設定鍵檔案包含的設定鍵‘%s’（數值為‘%s’）並非 UTF-8"
 
-#: glib/gkeyfile.c:1413 glib/gkeyfile.c:1907
+#: glib/gkeyfile.c:1417 glib/gkeyfile.c:1911
 #, c-format
 msgid "Key file contains key '%s' which has value that cannot be interpreted."
 msgstr "設定鍵檔案包含的設定鍵‘%s’的數值無法解譯。"
 
-#: glib/gkeyfile.c:1528
+#: glib/gkeyfile.c:1532
 #, fuzzy, c-format
 msgid ""
 "Key file contains key '%s' which has a value that cannot be interpreted."
 msgstr "設定鍵檔案包含的設定鍵‘%s’的數值無法解譯。"
 
-#: glib/gkeyfile.c:2122 glib/gkeyfile.c:2334
+#: glib/gkeyfile.c:2126 glib/gkeyfile.c:2338
 #, c-format
 msgid ""
 "Key file contains key '%s' in group '%s' which has value that cannot be "
 "interpreted."
 msgstr "設定鍵檔案包含的羣組‘%2$s’中設定鍵‘%1$s’數值無法解譯"
 
-#: glib/gkeyfile.c:2518 glib/gkeyfile.c:2719 glib/gkeyfile.c:3249
+#: glib/gkeyfile.c:2522 glib/gkeyfile.c:2723 glib/gkeyfile.c:3253
 #, c-format
 msgid "Key file does not have key '%s' in group '%s'"
 msgstr "設定鍵檔案的羣組‘%2$s’中沒有設定鍵‘%1$s’"
 
-#: glib/gkeyfile.c:3483
+#: glib/gkeyfile.c:3487
 msgid "Key file contains escape character at end of line"
 msgstr "設定鍵檔案在行尾包含跳出字符"
 
-#: glib/gkeyfile.c:3505
+#: glib/gkeyfile.c:3509
 #, c-format
 msgid "Key file contains invalid escape sequence '%s'"
 msgstr "設定鍵檔案含有不正確的「跳出字符」‘%s’"
 
-#: glib/gkeyfile.c:3647
+#: glib/gkeyfile.c:3651
 #, c-format
 msgid "Value '%s' cannot be interpreted as a number."
 msgstr "數值‘%s’不能被解譯為數字。"
 
-#: glib/gkeyfile.c:3661
+#: glib/gkeyfile.c:3665
 #, c-format
 msgid "Integer value '%s' out of range"
 msgstr "整數值‘%s’超出範圍"
 
-#: glib/gkeyfile.c:3694
+#: glib/gkeyfile.c:3698
 #, c-format
 msgid "Value '%s' cannot be interpreted as a float number."
 msgstr "數值‘%s’不能被解譯為浮點數。"
 
-#: glib/gkeyfile.c:3718
+#: glib/gkeyfile.c:3722
 #, c-format
 msgid "Value '%s' cannot be interpreted as a boolean."
 msgstr "數值‘%s’不能被解譯為邏輯值。"
@@ -1092,7 +1098,7 @@ msgstr "傳給 %s 的計數值太大"
 msgid "Stream is already closed"
 msgstr "串流已經關閉"
 
-#: gio/gcancellable.c:388 gio/glocalfile.c:2076 gio/gsimpleasyncresult.c:621
+#: gio/gcancellable.c:389 gio/glocalfile.c:2076 gio/gsimpleasyncresult.c:621
 #: gio/gsimpleasyncresult.c:648
 msgid "Operation was cancelled"
 msgstr "操作已被取消"
@@ -1123,38 +1129,48 @@ msgstr "未命名的"
 msgid "Desktop file didn't specify Exec field"
 msgstr "桌面(Desktop)檔案未指定 Exec 欄位"
 
-#: gio/gdesktopappinfo.c:1004
+#: gio/gdesktopappinfo.c:890
 msgid "Unable to find terminal required for application"
 msgstr "無法找到應用程式要求的終端機"
 
-#: gio/gdesktopappinfo.c:1236
+#: gio/gdesktopappinfo.c:1098
 #, c-format
 msgid "Can't create user application configuration folder %s: %s"
 msgstr "不能建立使用者應用程式組態資料夾 %s：%s"
 
-#: gio/gdesktopappinfo.c:1240
+#: gio/gdesktopappinfo.c:1102
 #, c-format
 msgid "Can't create user MIME configuration folder %s: %s"
 msgstr "不能建立使用者 MIME 組態資料夾 %s：%s"
 
-#: gio/gdesktopappinfo.c:1644
+#: gio/gdesktopappinfo.c:1506
 #, c-format
 msgid "Can't create user desktop file %s"
 msgstr "不能建立使用者桌面檔案 %s"
 
-#: gio/gdesktopappinfo.c:1756
+#: gio/gdesktopappinfo.c:1618
 #, c-format
 msgid "Custom definition for %s"
 msgstr "自選 %s 的定義"
 
-#: gio/gdrive.c:381
+#: gio/gdrive.c:407
 msgid "drive doesn't implement eject"
 msgstr "裝置無法實作退出功能(eject)"
 
-#: gio/gdrive.c:451
+#: gio/gdrive.c:477
 msgid "drive doesn't implement polling for media"
 msgstr "裝置無法實作媒體的輪詢"
 
+#: gio/gdrive.c:657
+#, fuzzy
+msgid "drive doesn't implement start"
+msgstr "裝置無法實作退出功能(eject)"
+
+#: gio/gdrive.c:757
+#, fuzzy
+msgid "drive doesn't implement stop"
+msgstr "裝置無法實作退出功能(eject)"
+
 #: gio/gemblem.c:325
 #, c-format
 msgid "Can't handle version %d of GEmblem encoding"
@@ -1181,10 +1197,11 @@ msgstr "預期為 GEmblemedIcon 的 GEmblem"
 
 #: gio/gfile.c:861 gio/gfile.c:1091 gio/gfile.c:1226 gio/gfile.c:1462
 #: gio/gfile.c:1516 gio/gfile.c:1573 gio/gfile.c:1656 gio/gfile.c:1711
-#: gio/gfile.c:1771 gio/gfile.c:1825 gio/gfile.c:3146 gio/gfile.c:3200
-#: gio/gfile.c:3331 gio/gfile.c:3371 gio/gfile.c:3698 gio/gfile.c:4100
-#: gio/gfile.c:4184 gio/gfile.c:4267 gio/gfile.c:4347 gio/gfile.c:4677
-#: gio/gfile.c:4957 gio/gfile.c:5026 gio/win32/gwinhttpfile.c:431
+#: gio/gfile.c:1771 gio/gfile.c:1825 gio/gfile.c:3150 gio/gfile.c:3204
+#: gio/gfile.c:3335 gio/gfile.c:3375 gio/gfile.c:3702 gio/gfile.c:4104
+#: gio/gfile.c:4188 gio/gfile.c:4271 gio/gfile.c:4351 gio/gfile.c:4681
+#: gio/gfile.c:4961 gio/gfile.c:5030 gio/gfile.c:6618 gio/gfile.c:6706
+#: gio/win32/gwinhttpfile.c:431
 msgid "Operation not supported"
 msgstr "不支援的操作"
 
@@ -1217,28 +1234,28 @@ msgstr "目標檔案已存在"
 msgid "Can't recursively copy directory"
 msgstr "不能遞廻複製目錄"
 
-#: gio/gfile.c:2780
+#: gio/gfile.c:2784
 msgid "Can't copy special file"
 msgstr "不能複製特殊的檔案"
 
-#: gio/gfile.c:3321
+#: gio/gfile.c:3325
 msgid "Invalid symlink value given"
 msgstr "提供了無效的符號連結值"
 
-#: gio/gfile.c:3414
+#: gio/gfile.c:3418
 msgid "Trash not supported"
 msgstr "不支援回收筒"
 
-#: gio/gfile.c:3463
+#: gio/gfile.c:3467
 #, c-format
 msgid "File names cannot contain '%c'"
 msgstr "檔案名稱不能包含「%c」"
 
-#: gio/gfile.c:5674 gio/gvolume.c:376
+#: gio/gfile.c:5678 gio/gvolume.c:376
 msgid "volume doesn't implement mount"
 msgstr "儲存裝置尚未實作掛載功能"
 
-#: gio/gfile.c:5782
+#: gio/gfile.c:5786
 msgid "No application is registered as handling this file"
 msgstr "沒有應用程式註冊為用以處理這個檔案"
 
@@ -1329,7 +1346,7 @@ msgstr "輸入串流尚未實作讀取"
 msgid "Stream has outstanding operation"
 msgstr "串流有異常操作"
 
-#: gio/glocaldirectorymonitor.c:274
+#: gio/glocaldirectorymonitor.c:295
 msgid "Unable to find default local directory monitor type"
 msgstr "無法找到預設的本地端目錄監視器類型"
 
@@ -1466,66 +1483,66 @@ msgstr "取得檔案「%s」狀態時發生錯誤：%s"
 msgid " (invalid encoding)"
 msgstr "（無效的編碼）"
 
-#: gio/glocalfileinfo.c:1705
+#: gio/glocalfileinfo.c:1719
 #, c-format
 msgid "Error stating file descriptor: %s"
 msgstr "取得檔案描述狀態時發生錯誤：%s"
 
-#: gio/glocalfileinfo.c:1750
+#: gio/glocalfileinfo.c:1764
 msgid "Invalid attribute type (uint32 expected)"
 msgstr "無效的屬性類型（應為 uint32 值）"
 
-#: gio/glocalfileinfo.c:1768
+#: gio/glocalfileinfo.c:1782
 msgid "Invalid attribute type (uint64 expected)"
 msgstr "無效的屬性類型（應為 uint64 值）"
 
-#: gio/glocalfileinfo.c:1787 gio/glocalfileinfo.c:1806
+#: gio/glocalfileinfo.c:1801 gio/glocalfileinfo.c:1820
 msgid "Invalid attribute type (byte string expected)"
 msgstr "無效的屬性類型（應為 byte string 值）"
 
-#: gio/glocalfileinfo.c:1832
+#: gio/glocalfileinfo.c:1846
 #, c-format
 msgid "Error setting permissions: %s"
 msgstr "設定權限時發生錯誤：%s"
 
-#: gio/glocalfileinfo.c:1883
+#: gio/glocalfileinfo.c:1897
 #, c-format
 msgid "Error setting owner: %s"
 msgstr "設定擁有者時發生錯誤：%s"
 
-#: gio/glocalfileinfo.c:1906
+#: gio/glocalfileinfo.c:1920
 msgid "symlink must be non-NULL"
 msgstr "符號連結必須為非-NULL"
 
-#: gio/glocalfileinfo.c:1916 gio/glocalfileinfo.c:1935
-#: gio/glocalfileinfo.c:1946
+#: gio/glocalfileinfo.c:1930 gio/glocalfileinfo.c:1949
+#: gio/glocalfileinfo.c:1960
 #, c-format
 msgid "Error setting symlink: %s"
 msgstr "設定符號連結時發生錯誤：%s"
 
-#: gio/glocalfileinfo.c:1925
+#: gio/glocalfileinfo.c:1939
 msgid "Error setting symlink: file is not a symlink"
 msgstr "設定符號連結時發生錯誤：檔案不是符號連結"
 
-#: gio/glocalfileinfo.c:2051
+#: gio/glocalfileinfo.c:2065
 #, fuzzy, c-format
 msgid "Error setting modification or access time: %s"
 msgstr "設定權限時發生錯誤：%s"
 
-#: gio/glocalfileinfo.c:2074
+#: gio/glocalfileinfo.c:2088
 msgid "SELinux context must be non-NULL"
 msgstr "SELinux 關聯必須為非-NULL"
 
-#: gio/glocalfileinfo.c:2089
+#: gio/glocalfileinfo.c:2103
 #, c-format
 msgid "Error setting SELinux context: %s"
 msgstr "設定 SELinux 關聯時發生錯誤：%s"
 
-#: gio/glocalfileinfo.c:2096
+#: gio/glocalfileinfo.c:2110
 msgid "SELinux is not enabled on this system"
 msgstr "SELinux 在這個系統上並未啟用"
 
-#: gio/glocalfileinfo.c:2157
+#: gio/glocalfileinfo.c:2171
 #, c-format
 msgid "Setting attribute %s not supported"
 msgstr "不支援設定屬性 %s"
@@ -1801,9 +1818,5 @@ msgstr "[檔案...]"
 #~ msgid "The file descriptor to write to"
 #~ msgstr "要寫入的檔案描述子"
 
-#~ msgid "%u byte"
-#~ msgid_plural "%u bytes"
-#~ msgstr[0] "%u 位元組"
-
 #~ msgid "Error creating backup link: %s"
 #~ msgstr "建立備份連結時發生錯誤：%s"