Commit Graph

5008 Commits

Author SHA1 Message Date
Friedrich Beckmann
7746add2ba MacOS: gosxcontenttype.c consider generic icon names also
This patch considers generic icon names also when icon names
are searched based on content type. Without this fix only
non-generic icon names are found. This results in no icons
for pdf and jpeg files in the file selection dialog.
This is discussed in

https://bugzilla.gnome.org/show_bug.cgi?id=788936
2018-02-22 13:02:10 +00:00
Friedrich Beckmann
f45a22a21e MacOS: fix content type check vs. mime check to show folder icons
In MacOS the file selection dialog does not show folder icons.
With this fix the folder icons are shown. The bug is described
in:

https://bugzilla.gnome.org/show_bug.cgi?id=788936

This bug fix is only partial, because this fix is only the
last resort when no mime information is available.
2018-02-22 13:02:10 +00:00
Jiří Techet
9076d51301 gio: Eliminate warnings in cstring conversion on OS X
create_cstr_from_cfstring_with_fallback() is allowed to be called when str == NULL
but create_cstr_from_cfstring() isn't which leads to warnings in the console.
Fix this by adding NULL checks into create_cstr_from_cfstring_with_fallback().

https://bugzilla.gnome.org/show_bug.cgi?id=788936
2018-02-22 13:02:10 +00:00
Jiří Techet
656e614da5 gio: Show icons based on file's mime type on OS X
The patch basically just grabs the implementation of g_content_type_get_icon_internal()
from gcontenttype.c - the only difference is that it first converts UTI to MIME using
g_content_type_get_mime_type() and at the end frees this temporary MIME type.

https://bugzilla.gnome.org/show_bug.cgi?id=788936
2018-02-22 13:02:10 +00:00
Friedrich Beckmann
9cb584dd98 MacOS: gosxappinfo.c Fix some memory leaks. Fix failure condition.
Ensure that the debug call won't crash if create_cstr_from_cfstring
returns NULL, fix the leak of that CFArrayRef, and make explicit the
failure condition of LSFindApplicationForInfo.

https://bugzilla.gnome.org/show_bug.cgi?id=788936
2018-02-22 13:02:10 +00:00
Friedrich Beckmann
ceeeb426aa MacOS: create_cstr_from_cfstring uses safe conversion - use CFStringGetCString
During testing with gdk-pixbuf I noticed failures during content type
to mime conversion. The root reason was the unsafe conversion used
in create_cstr_from_cfstring. The problem was addressed in commit
c60226e0a1 but that was reverted. I noticed the commit only
when I had fixed the problem. In addition I added a test to check
the content type to mime conversion on MacOS. This problem is
discussed in Bug #788936.

See: https://bugzilla.gnome.org/show_bug.cgi?id=788936
2018-02-22 13:02:10 +00:00
Friedrich Beckmann
530da42791 OSX: Use xdgmime system to guess content type from data
Closes: Bug #788401

The problem is described here:

https://bugzilla.gnome.org/show_bug.cgi?id=788401

This patch introduces the use of the xdgmime system to guess
the content type from data. So you can guess for example the
type public.svg-image from the file content of a svg file.
This patch only applies to MacOS. A test for the regression
is also included.
2018-02-22 13:02:10 +00:00
Ernestas Kulik
d75a6aeb4f gio: tests: modules: declare _get_type prototype
GCC complains about non-static functions being defined without a
previous prototype, even if they themselves provide one.

https://bugzilla.gnome.org/show_bug.cgi?id=793399
2018-02-21 10:58:26 +00:00
Ernestas Kulik
0510bf4cd5 tests: data-input-stream: fix -Wduplicated-branches
The fix makes things a bit awkward, but it seems to work just fine.

https://bugzilla.gnome.org/show_bug.cgi?id=793399
2018-02-16 17:41:58 +00:00
Philip Withnall
b4811aa15b gsubprocess: Fix a critical calling communicate() with no pipes
If calling g_subprocess_communicate() on a GSubprocess with no
stdout/stderr pipe, a critical warning would be emitted from
g_memory_output_stream_steal_as_bytes(), as it would be called on a NULL
output stream.

Fix that, improve the relevant GIR annotations, and expand the unit
tests to cover it (and various other combinations of flags).

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=793331
2018-02-13 16:29:01 +00:00
Simon McVittie
56b2983b77 gdbus-threading test: Allow even longer for test_method_calls_in_thread
This should take 4 seconds + overhead, but on a slow or heavily
loaded system, there's no guarantee that it won't take significantly
longer.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=792364
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884660
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Signed-off-by: Simon McVittie <smcv@collabora.com>
(cherry picked from commit 2685a533af)
2018-01-09 13:11:39 +00:00
Philip Withnall
692c8d179f gopenuriportal: Fix mismatched types in callback
The source object for this asynchronous operation is the GXdpOpenURI,
not a GDBusConnection. This was causing crashes in method calls on the
connection, unsurprisingly.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=791720
2018-01-08 11:46:37 +00:00
Simon McVittie
ffb6064664 cancellable: Don't assert if finalization races with cancellation
Commit 281e3010 narrowed the race between GCancellable::cancelled and
GCancellableSource's finalize(), but did not prevent it: there was
nothing to stop cancellation from occurring after the refcount drops
to 0, but before g_source_unref_internal() bumps it back up to 1 to
run finalize().

GCancellable cannot be expected to detect that situation, because the
only way it has to detect last-unref is finalize(), but in that
situation finalize() hasn't happened yet.

Instead of detecting last-unref, relax the precondition a little
to make it detect finalization: priv is only poisoned (set to NULL)
after the finalize() function has been called, so we can assume that
GCancellable has already seen finalize() by then.

Signed-off-by: Simon McVittie <smcv@collabora.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=791754
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884654
(cherry picked from commit 7f3bfcb891)
2018-01-05 20:46:17 +00:00
Christian Hergert
42ef8e9d32 socketlistener: fix event signature in vfunc
The GSocketListener::event signal has a type of GSocketListenerEvent,
which is an enum. However, the vfunc signature had a pointer, with
different sizing requirements. Given the alignment and prompostion
of some systems, you may still get the same call-site layout, but
that is not guaranteed.

This fixes the parameter to have the proper enumeration.

https://bugzilla.gnome.org/show_bug.cgi?id=791906
2017-12-25 00:13:00 -08:00
Simon McVittie
da4cdc6890 gmenumodel test: Wait for the expected events to happen
Previously, we waited an arbitrary 100ms or 200ms and then asserted
that the events had happened, but that might fail if the machine is
slow or heavily loaded.

We still wait for an arbitrary time for negative tests (asserting
that no more signals are received) because we don't have any way
to do better here.

Signed-off-by: Simon McVittie <smcv@collabora.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=791744
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884661
2017-12-21 10:38:21 +00:00
Simon McVittie
003c392a3b gmenumodel test: If something goes wrong, don't wait forever
I'm about to add some loops that would otherwise wait indefinitely.

Signed-off-by: Simon McVittie <smcv@collabora.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=791744
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884661
2017-12-21 10:37:54 +00:00
Mario Sanchez Prada
620c50ba1e gio/tests/appinfo: New test for launch with "appId-less" applications
New test to make sure we exercise the code paths in gdesktopappinfo.c
that get triggered when g_desktop_app_info_launch_uris_with_spawn()
is used (i.e. unknown app ID, no session bus), both for when either
a single URI or multiple ones are expected by the application.

https://bugzilla.gnome.org/show_bug.cgi?id=791337
2017-12-08 13:50:21 +00:00
Mario Sanchez Prada
75681a8778 gdesktopappinfo: Gracefully handle NULL URIs when passed to expand_macro()
If an application calls g_app_info_launch_uris() with a GList that includes
NULL values in some of its data members, and GIO ends up internally calling
g_desktop_app_info_launch_uris_with_spawn() for whatever reason (e.g. no
D-Bus session available), expand_macro() will crash due to the invalid data.

As this is considered a programmer error, use g_return_val_if_fail() in those
situations to prevent the crash from happening, but printing a warning anyway.

https://bugzilla.gnome.org/show_bug.cgi?id=791337
2017-12-08 13:50:21 +00:00
Mario Sanchez Prada
d42115b013 gdesktopappinfo: Pass a copy of the URIs list to expand_application_parameters()
This list will be modified in-place when calling expand_macro(), so pass a copy
of it instead the original pointer, that is supposed to be an input parameter
only for g_desktop_app_info_launch_uris_with_spawn().

https://bugzilla.gnome.org/show_bug.cgi?id=791337
2017-12-08 13:50:21 +00:00
Philip Withnall
2c066d5d39 gio: Fix querying of thumbnail attributes other than thumbnail::path
The thumbnail attributes would previously only be set if thumbnail::path
was included in the query — so querying for just thumbnail::is-valid
would return no results.

This fixes the behaviour of
    gio info -a thumbnail::is-valid ./some-file.png
vs
    gio info -a thumbnail ./some-file.png

The first command would previously list nothing. The second would
previously list a thumbnail::path and thumbnail::is-valid.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=791325
2017-12-07 13:05:14 +00:00
Arnaud Bonatti
5f3f830fc6 gio: Remove stray ‘<’ from gschema.dtd
The mathematical operator was making the DTD unusable.
Also, min and max can be equal with current parser.

https://bugzilla.gnome.org/show_bug.cgi?id=791267
2017-12-06 10:35:30 +00:00
Arnaud Bonatti
4bbfb963ab Fix gschema.dtd regarding flags
https://bugzilla.gnome.org/show_bug.cgi?id=791235
2017-12-05 12:32:45 +00:00
Philip Withnall
c124fcf112 goutputstream: Fix pre-condition
Spotted by Izak van Langevelde.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=791036
2017-12-01 10:04:05 +00:00
Philip Withnall
ebe3fc2af8 inotify: Add missing commas
These were accidentally omitted from commit
748bb24985. My fault.

Signed-off-by: Philip Withnall <withnall@endlessm.com>
2017-11-28 14:42:14 +00:00
Philip Withnall
3246f1df99 inotify: Don’t propagate unrecognised events to GLocalFileMonitor
If we can’t convert the inotify event mask into a GFileMonitorEvent enum
value, don’t propagate it to GLocalFileMonitor, since it hits an
assertion failure in that case.

This should no longer be possible since the previous commit to ignore
IN_Q_OVERFLOW events, but we might as well change this just in case
other bugs crop up in event mask handling.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=776147
2017-11-28 13:57:07 +00:00
Philip Withnall
d97e077090 inotify: Ignore IN_Q_OVERFLOW events
There’s not much we can do about them, and if they go unhandled, they
can propagate through to g_file_monitor_source_handle_event() and cause
assertion failures due to not mapping to a GFileMonitorEvent.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=776147
2017-11-28 13:57:07 +00:00
Philip Withnall
38ec9c6da3 kqueue: Fix invalid emission of G_FILE_MONITOR_EVENT_MOVED event
That event is deprecated, and the kqueue backend can’t provide enough
information to go alongside the event (i.e. the name of the new file).
Use G_FILE_MONITOR_EVENT_DELETED instead.

Quite disappointed in the kqueue documentation for this: I cannot find a
single piece of documentation or example about how NOTE_RENAME is
supposed to communicate the new name of the file.

If it turns out that this is possible, the code can be amended again in
future. At least now it doesn’t abort.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=776147
2017-11-28 13:57:07 +00:00
Sebastian Dröge
23373d7f7e GResource – Add note to documentation that the memory must be at least pointer aligned
https://bugzilla.gnome.org/show_bug.cgi?id=790030
2017-11-14 14:59:12 +00:00
Christian Kellner
5be7554a65 gio-tool: fix inverted logic in monitor tool
The tool should refuse to work if none of the locations to watch
are set, not if *any* of them are unset.

https://bugzilla.gnome.org/show_bug.cgi?id=790093
2017-11-10 08:54:27 +00:00
Ondrej Holy
fe620e5def gio-tool: Do not alter uris before use
Uris may be altered by the following code, which breaks xdg-open:
file = g_file_new_for_commandline_arg (arg[i])
uri = g_file_get_uri (file);

Examples of possible uri changes:
mailto:email -> mailto:///email
magnet:?xt=urn:hash -> magnet:///?xt=urn:hash
ssh://user@host -> sftp://user@host

This patch causes that uris aren't preprocessed for locations with
scheme, however absolute and relative paths are still preprocessed.

https://bugzilla.gnome.org/show_bug.cgi?id=779182
2017-11-07 14:25:29 +01:00
John Ralls
d74a69826f Revert "[MacOS] Fallback to CFStringGetCSTring if CFStringGetCStringPtr fails."
This reverts commit d5a9ce69c4.
Partial resolution of bug 789894
2017-11-01 18:00:49 -07:00
John Ralls
d5a9ce69c4 [MacOS] Fallback to CFStringGetCSTring if CFStringGetCStringPtr fails. 2017-10-13 14:05:19 -07:00
Chun-wei Fan
a804fcba7a gio: Fix gio-tool-open.c on Windows/Cocoa
Commit 7384e37 broke builds on these platforms as *NIX-only APIs are
being used unconditionally.  Fix the build by building these portions
when not on Windows or Cocoa.

https://bugzilla.gnome.org/show_bug.cgi?id=780296
2017-10-09 09:10:21 +08:00
Ondrej Holy
7384e372f0 gio: Add hack to close up dbus-daemon race
If gio open exits before the program it starts fully activates, then
the dbus-daemon may avoid doing the activating method call.

This commit works around the problem by pinging the activated application,
and waiting for a reply.

Same workaround is used in gtk-launch and was used in gvfs-open before
it was replaced by gio open.

https://bugzilla.gnome.org/show_bug.cgi?id=780296
2017-10-05 17:29:19 +02:00
Ondrej Holy
f480caf760 gunixmounts: Fix mount points generation
Commit 53ed180 improved mtab processing, however, also introduced bug
in code obtaining mount points. mtab was used by mistake also for
g_unix_mount_points_get implementation, which is obviously wrong and
fstab has to be used instead...

https://bugzilla.gnome.org/show_bug.cgi?id=781867
2017-10-02 12:58:44 +02:00
Chun-wei Fan
915ab35e96 meson: Install items according to their relevance
The m4 and bash completion items are usable and relevant
depending on the host system's configuration.  So, we check for the
presence of the programs that these items depend on, and only install
them when those programs are found.

For the Valgrind suppression files, we don't install them on Windows as
Valgrind is currently not supported on Windows.

Als fix the path where the GDB helpers are installed, as the path is
incorrectly constructed.

This will fix the "install" stage when building on Visual Studio at
least as there are some post-install steps that are related to them,
which will make use of these programs.

https://bugzilla.gnome.org/show_bug.cgi?id=783270
2017-09-14 16:01:17 +08:00
Ignacio Casal Quinteiro
f9d95de490 Revert "GSocket: Fix race conditions on Win32 if multiple threads are waiting on conditions for the same socket"
This reverts commit 799f8dcd46.
This patch seems to break applications that use GTask specific
operations with GSocket. We will need to investigate a bit more
on this issue but for now we revert it and leave it for the
next major release.
2017-09-12 23:27:05 +02:00
Cosimo Cecchi
88a39670e7 GSettingsBackend: use a GWeakRef during dispatch
Instead of a full reference, which causes problems for clients that
expect a GSettings instance to stop firing signals once they drop the
last reference.

https://bugzilla.gnome.org/show_bug.cgi?id=780861
2017-09-08 09:29:18 -07:00
Chris Lamb
e5eaca5492 gio-querymodules: Make the output reproducible
Whilst working on the Reproducible Builds effort [0], we noticed that
queryimmodules generates non-reproducible output as it iterates over the
filesystem without sorting.

Patch attached.

 [0] https://reproducible-builds.org/

Signed-off-by: Chris Lamb <lamby@debian.org>

https://bugzilla.gnome.org/show_bug.cgi?id=786983
2017-09-08 15:20:27 +01:00
Daniel Boles
b1b00517cf GApplication: Fix required # of elements in docs
The reality, as shown by our tests, is that only 2 elements are needed.
2017-09-06 21:44:25 +01:00
Cj Malone
926db3174a gdesktopappinfo.c: Drop disregarded xterm check
https://bugzilla.gnome.org/show_bug.cgi?id=786580
2017-08-23 23:55:43 +01:00
Philip Withnall
73eee8d64e tests: Fix some leaks and double-frees in the GSubprocess tests
Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=786456
2017-08-23 11:37:32 +01:00
Will Thompson
65a95a5a2d gio: failing cases for subprocess cancellable bug
https://bugzilla.gnome.org/show_bug.cgi?id=786456
2017-08-23 11:37:32 +01:00
Philip Withnall
8f86d312d8 gio: Fix double-callback on cancellation with GSubprocess
See bug #786456 for a detailed analysis of the situation which can cause
this (in summary, if a g_subprocess_wait_async() call is cancelled on a
GSubprocess which is already known to be dead).

The problem was that the GCancellable callback handler was
unconditionally returning a result for the GTask for
g_subprocess_wait_async(), even if that GTask had already returned a
result and the callback was being invoked after the GTask had been
removed from the pending_waits list.

Fix that by checking whether the GTask is still in the pending_waits
list before returning a result for it.

Thanks to Will Thompson for some very useful unit tests which reproduce
this (which will be pushed in the following commit).

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=786456
2017-08-23 11:37:32 +01:00
Philip Withnall
a60359aee2 tests: Add temporary working directory for monitor test
Similarly to the previous commit, move the temporary directory for the
monitor test from $(cwd) to the system temporary directory.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=785260
2017-08-23 11:26:57 +01:00
Philip Withnall
0f5b523fac tests: Add temporary working directory for appmonitor test
Rather than creating a temporary directory in the current directory
(typically the builddir), then never deleting it; create one in the
system /tmp directory, and clean it up properly afterwards.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=785260
2017-08-23 11:26:57 +01:00
Philip Withnall
3ce00b29ec tests: Fix leak in appmonitor test
Spotted by Daniel Macks.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=785260
2017-08-23 11:26:57 +01:00
Ondrej Holy
087525b62b gio-tool: Use print_file_error correctly
Use print_file_error where an error relates to that file and vice versa.

https://bugzilla.gnome.org/show_bug.cgi?id=786463
2017-08-18 14:46:23 +02:00
Ondrej Holy
78fa67e70c gio-tool-save: Use g_output_stream_write_all instead of while
Simplify the read-write copy code and use g_output_stream_write_all
instead of while and g_output_stream_write.

https://bugzilla.gnome.org/show_bug.cgi?id=786462
2017-08-18 14:46:23 +02:00
Ondrej Holy
1cce5dda18 gfile: Use g_output_stream_write_all instead of while
Simplify the read-write copy code and use g_output_stream_write_all
instead of while and g_output_stream_write.

https://bugzilla.gnome.org/show_bug.cgi?id=786462
2017-08-18 14:46:23 +02:00