We need to check for the correct line endings on Windows (\r\n) for the
echo tests and currently need to skip the test_echo_eof test there, as
it depends on the cat utility that is not normally found on Windows, and
using an external installation of cat via MSYS or Cygwin would render the
test program to hang as cat waits for user input.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
Various tests were depending on local_error being set by a callback
when it could never have been the case. Simplify async error detection
logic in those cases, and fix leak of GError.
https://bugzilla.gnome.org/show_bug.cgi?id=711802
We had a GApplication testcase that handled both open and commandline.
This only way that this worked was by implementing the commandline
handler without actually setting the HANDLES_COMMAND_LINE flag.
This behaviour is now invalid, so just rip out the offending part of the
test.
https://bugzilla.gnome.org/show_bug.cgi?id=711099
Include unistd.h only on *NIX and define items as necessary on Windows,
also replace instances of ssize_t with the GLib-equivilant gssize so to fix
the build on platforms that do not have ssize_t, such as Visual C++.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
We need to use g_content_type_get_mime_type() to look up the mime type of
the file from the registry on the content type that was acquired on
Windows, as g_file_info_get_content_type() does not acquire the
file mime type (unlike on *NIX).
g_content_type_get_mime_type() on *NIX is more or less an no-op as it
simply returns the g_strdup()-ed version of the passed-in content type.
This will enable the resources test to pass on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
The overridden implementation of the skip method for
GLocalFileInputStream allows skipping past the end of the file which is
inconsistent with the documentation. Prevent this by first seeking to
the end of the file and then seeking backwards from there as much as
is necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=711048
If the goal is to make sure we don't have a dbus connection, it has
to call g_test_dbus_unset() instead which is much more complete.
In this case, g_test_dbus_unset() is called already, so it should be
fine.
https://bugzilla.gnome.org/show_bug.cgi?id=697348
This is to avoid having again the subtil bug in dbus-appinfo.c:
session_bus_down() was called before g_test_run() so the test was
running on the user's dbus session.
https://bugzilla.gnome.org/show_bug.cgi?id=697348
The G_ADD_PRIVATE() macro, and the auto-generated get_instance_private()
internal function, should be used conditionally depending on the maximum
allowed version of GLib, as defined by the GLIB_VERSION_MAX_ALLOWED
pre-processor symbol.
This allows generating code that can be compiled in projects that wish
to use an older API version of GLib through the use of the
GLIB_VERSION_MAX_ALLOWED symbol.
https://bugzilla.gnome.org/show_bug.cgi?id=710133
This code was added for use by the G_FILE_ATTRIBUTE_THUMBNAIL_IS_VALID
file attribute, but may end up being used elsewhere (e.g. in GVfs) as well.
As it’s dealing with untrusted external files, and the non-trivial PNG file
format, this commit adds several test cases to cover valid and invalid PNG
files.
The security model for the thumbnail verification code is that the user’s
cache directory is untrusted, and potentially any PNG file which is passed
to the verifier has been manipulated arbitrarily by an attacker.
This is a follow-up to commit fe7069749f.
https://bugzilla.gnome.org/show_bug.cgi?id=709898
It is our intention that memory output streams should operate in two
distinct modes, depending on if a realloc function was provided or not.
In the case that we have a realloc function (resizable mode), we want
the stream to behave as if it were a file that started out empty. In
the case that we don't have a realloc function (fixed-sized mode), we
want the stream to behave as a block device would.
To this end, we introduce two changes in functionality:
- seeking to SEEK_END on a resizable stream will now seek to the end of
the valid data region, not to the end of the allocated memory (which
is really just an implementation detail)
- seeks past the end of the allocated memory size are now permitted,
but only on resizable streams. The next write will grow the buffer
(inserting zeros between).
Some tweaks to testcases were required in order not to break the build,
which indicates that this is an API break, but it seems unlikely that
anyone will be effected by these changes 'in the real world'.
Updates to documentation and further testcases are in following commits.
Based on a patch from Maciej Piechotka <uzytkownik2@gmail.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=684842
Over many years of writing code interacting with subprocesses, a pattern
that comes up a lot is to run a child and get its output as UTF-8, to
put inside a JSON document or render in a GtkTextBuffer, etc.
It's very important to validate at the boundaries, and not say deep
inside Pango.
We could do this a bit more efficiently if done in a streaming fashion,
but realistically this should be OK for now.
We weren't closing the streams after we were done reading or writing,
which is kind of essential. The easy way to fix this is to just use
g_output_stream_splice() to a GMemoryOutputStream rather than
hand-rolling it. This results in a substantial reduction of code
complexity.
A second serious issue is that we were marking the task as complete when
the process exits, but that's racy - there could still be data to read
from stdout. Fix this by just refcounting outstanding operations.
This code, not surprisingly, looks a lot like the "multi" test.
Next, because processes output binary data, I'd be forced to annotate
the char*/length pairs as (array) (element-type uint8). But rather than
doing that, it's *far* simpler to just use GBytes.
We need a version of this that actually validates as UTF-8, that will be
in the next patch.
There are a number of nice things this class brings:
0) Has a race-free termination API on all platforms (on UNIX, calls to
kill() and waitpid() are coordinated as not to cause problems).
1) Operates in terms of G{Input,Output}Stream, not file descriptors
2) Standard GIO-style async API for wait() with cancellation
3) Makes some simple cases easy, like synchronously spawning a
process with an argument list
4) Makes hard cases possible, like asynchronously running a process
with stdout/stderr merged, output directly to a file path
Much rewriting and code review from Ryan Lortie <desrt@desrt.ca>
https://bugzilla.gnome.org/show_bug.cgi?id=672102
Rather than having lots of obscure platform-based #ifdefs all over
gio, define some macros in gcredentialsprivate.h, and use those to
simplify the rest of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=701482
Previously, no testcases tested the close flags of
g_output_stream_splice_async. This patch adds tests for that and
also tests various combinations of threaded and non-threaded
GInputStream async reads and GOutputStream async writes.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Make use of __wgetmainargs() on Windows so that we can get wide char
versions of the argv's that are passed in when this test program is being
invoked. This is necessary as one might enter non-ASCII, such as
CJK characters filenames and/or directories to run the test program
against, so that we can process the name(s) and pass the proper
UTF-8-encoded name(s) of the files/directories that is being tested.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
Virtaal installs a mime package for various .po-like file formats, one
of which has the extension .txt. This causes GLib to report ".txt"
files still as "text/plain" but no longer with complete certainty.
The result is that asserting !uncertain during the testsuite causes the
test to fail if Virtaal happens to be installed.
Remove this assertion.
GNetworkAddress was allowing IPv6 scope ids in g_network_address_new()
/ g_network_address_parse(), but not in g_network_address_parse_uri().
Fix that.
Part of https://bugzilla.gnome.org/show_bug.cgi?id=669724
Convert {glib,gobject,gio}/tests to use the automake TAP driver
and test harness instead of gtester. To do so, we add a glib-tap.mk
that provides the same interface as glib.mk, except for the
reporting and coverage testing functionality. Eventually, we may
want to replace glib.mk with it. I've not yet converted the
toplevel tests/ directory, since it mixes gtestutils tests with
other binaries.
https://bugzilla.gnome.org/show_bug.cgi?id=692125
With UDP sockets, g_socket_bind() with allow_reuse=TRUE on Linux
behaved in a way that the documentation didn't suggest, and that
didn't match other OSes. (Specifically, it allowed binding multiple
multicast sockets to the same address.)
Since this behavior is useful, and since allow_reuse didn't have any
other meaning with UDP sockets, update the docs to reflect the Linux
behavior, and make it do the same thing on non-Linux.
https://bugzilla.gnome.org/show_bug.cgi?id=689245
