GResolver doesn't do full validation of its inputs, so in some of
these tests, the fact that we were getting back
G_RESOLVER_ERROR_NOT_FOUND is because the junk string was getting
passed to an upstream DNS resolver, which returned NXDOMAIN. But if
there's no network on the machine then we'd get
G_RESOLVER_ERROR_INTERNAL instead in that case.
Redo the code for type-based selection of applications (all,
recommended, default, fallback) based on the new DesktopFileDir
structures that we introduced last cycle.
At the same time, we expand the functionality to add support for the new
features of the specification:
- moving ~/.local/share/applications/mimeapps.list to ~/.config/
- per-desktop default applications (via XDG_CURRENT_DESKTOP)
- sysadmin customisation of defaults (via /etc/xdg/mimeapps.list)
- deprecation of the old defaults.list, favouring the use of
/usr/share/applications/mimeapps.list (or gnome-mimeapps.list) to
accomplish the same
We modify the mimeapps testcase to check for mimeapps.list having been
created in XDG_CONFIG_HOME instead of XDG_DATA_HOME.
The modification is a net reduction of code (due to less duplication in
bookkeeping). It is also an increase in performance and reduction in
memory consumption (due to simplified data structures). Finally, it
removes the stat-based timestamp checking in favour of the
GFileMonitor-based approach that was already being used in the
implementation of DesktopFileDir (in order to know if we had to rescan
the desktop files themselves).
https://bugzilla.gnome.org/show_bug.cgi?id=728040
We currently assume that setting an application as the default will take
it to the front of the list of supported applications for a given type,
but this is not necessarily true.
Check instead that the application is actually set as default.
https://bugzilla.gnome.org/show_bug.cgi?id=728040
Set XDG_DATA_DIRS to make sure we don't use /usr/share from the
appmonitor test. We will soon throw a warning if we find defaults.list,
so make sure we don't open ourselves up to that if there is one on the
system.
https://bugzilla.gnome.org/show_bug.cgi?id=728040
The desktop file for myapp3 didn't declare support for image/png, but
the testcase expects it to be recommended on the basis of it being the
default app according to defaults.list.
This will not work in the future -- we will only list apps that actually
support the filetype in question, unless they've been explicitly added
as associations.
https://bugzilla.gnome.org/show_bug.cgi?id=728040
Add G_DBUS_ERROR codes for:
* org.freedesktop.DBus.Error.UnknownObject
* org.freedesktop.DBus.Error.UnknownInterface
* org.freedesktop.DBus.Error.UnknownProperty
* org.freedesktop.DBus.Error.PropertyReadOnly
These were discussed on the dbus mailing list
and introduced in the following libdbus commit:
2c34514620c4b79ea4ec71d1db583379138d01ac
https://bugzilla.gnome.org/show_bug.cgi?id=727900
Make sure that the @ sign is inside the authority part before attempting
to parse the userinfo. We do this by checking if the @ sign comes before
any of the possible authority delimiters.
Add unit test to verify parsing of ftp://ftp.gnome.org/start?foo=bar@baz
https://bugzilla.gnome.org/show_bug.cgi?id=726040
We need to have these in BUILT_SOURCES so that 'make' knows to generate them
before attempting to compile other .c files in the same directory (since some
of these files include the header).
Should fix up remaining issues about partial versions of this file being
included under parallel builds.
https://bugzilla.gnome.org/show_bug.cgi?id=725891
Add a test for GSubprocess to test setting, unsetting and inheritance of
environment variables. Use communicate() to give it a bit more of a
workout as well.
https://bugzilla.gnome.org/show_bug.cgi?id=725651
Add the basename from the first component of the Exec line to the list of
strings to search for via g_desktop_app_info_search().
We treat Exec as a fairly strong match -- just below the visible name.
Add a testcase to make sure everything is working OK.
https://bugzilla.gnome.org/show_bug.cgi?id=725023
There is a race condition in the makefile that can result in build failures like this in parallel builds:
| ./gdbus-test-codegen-generated.h:7:0: error: unterminated #ifndef
| #ifndef __GDBUS_TEST_CODEGEN_GENERATED_H__
This is because a rule like this:
x.c x.h: prerequisites
@commands
doesn't consider x.c and x.h together. Instead, it expands to two rules, one to
generate x.c and one to generate x.h, which happen to run the same commands. In
the worst case they execute in parallel, overwriting each other's output.
Signed-off-by: Ross Burton <ross.burton@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=723616
If a GSimpleAsyncResult has a NULL source tag, allow it to compare
valid to a non-NULL source tag in g_simple_async_result_is_valid(), to
simplify cases where, eg, g_simple_async_result_new() and
g_simple_async_result_report_error_in_idle() are both used.
https://bugzilla.gnome.org/show_bug.cgi?id=721458
In addition to the standard "192.168.1.1" format, there are numerous
legacy IPv4 address formats (such as "192.168.257",
"0xc0.0xa8.0x01.0x01", "0300.0250.0001.0001", "3232235777", and
"0xc0a80101"). However, none of these forms are ever used any more
except in phishing attempts. GLib wasn't supposed to be accepting
these addresses (neither g_hostname_is_ip_address() nor
g_inet_address_new_from_string() recognizes them), but getaddrinfo()
accepts them, and so the parts of gio that use getaddrinfo()
accidentally did accept those formats.
Fix GNetworkAddress and GResolver to reject these address formats.
https://bugzilla.gnome.org/show_bug.cgi?id=679957
Windows needs a special inefficient hack to implement
g_socket_get_available() correctly for UDP sockets, but that hack
isn't needed for TCP, and in fact, might give the wrong answer in that
case. Fix it to only use the hack with UDP.
Also, fix that case to handle non-blocking sockets as well.
And add a test case for g_socket_get_available() with TCP.
https://bugzilla.gnome.org/show_bug.cgi?id=723422
In some virtualization setups, ifindexes can end up becoming very
large, and so the existing code that assumes that *some* interface
must have an index less than 255 fails.
Fix this by explicitly looking for "lo" first. And then if that fails
(on Windows, or other systems where the loopback interface is not
called "lo"), try indexes up to 1024 rather than 255.
https://bugzilla.gnome.org/show_bug.cgi?id=723048
The file extension of the GIO module could be something other than .so,
depending on platform. Use G_MODULE_SUFFIX so that the test will run
correctly on non-*nix platforms, such as Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=719344
If installed tests are not enabled, installed_testdir is not
defined, so we end up trying to create /modules and to chmod
things in /x-content/, which is not right.
When losing the D-Bus connection, we would write to stdout about it just
before killing ourselves with SIGTERM. We're a library, so we should
probably use stderr instead.
https://bugzilla.gnome.org/show_bug.cgi?id=721324
The x-content/win32-software type is only recognized if
the autorun.exe file is executable. Since the file is installed
as data, we need to fix up its permissions in an
install-data-hook.
This test is inspired by its namesake in GTK+. We instantiate
all types, and check the default values of their properties,
with some exceptions for types that are known not to work.
I recently had to track down why these tests failed. Turned
out that some rogue package on my system had installed mime
types that declared all files with 3 letter names to be
'chemical/x-turbomole-vibrational'.
This change will make it more obvious what is going on by
mentioning the mime types in the assertion message.
GDBusConnection cleanup is inherently racy due to its use of worker
threads. Put tests that expect a NULL G_BUS_TYPE_SESSION singleton
as the first tests to work around cleanup races.
https://bugzilla.gnome.org/show_bug.cgi?id=719837
The desktop-files directory contains a mimeapps.cache file
that was not installed as data for installed tests, causing
the file measure test to fail only in when installed.
Make the testcase compare the byte size to what is reported
by du. Also add a test for the async api, and mak eit test
the progress reporting callback.
The test reveals that there's something fishy with this monitor.
One has to call g_app_info_get_all() for it to start working,
and then it only works once.
The static analyser (correctly) considers a type check to fail if the
variable is NULL. In this case, the address must be non-NULL as no error
was thrown by g_socket_connection_get_remote_address(), but the static
analyser doesn’t know this.
Add a non-NULL assertion anyway, both to shut the analyser up, and
because it’s good extra testing.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
These prevent some false positives from the static analyser which are
caused by it not inspecting the invariants of
g_subprocess_communicate[_utf8]_finish() (i.e. that stdout and
stdout_str will always be set unless an error was returned).
They’re also good testing anyway.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=113075
Be a little bit more careful in regards to initializing a primitive type
variable before passing it by reference, as it could have random stuff
in the variable's address depending on the CRT, such as MSVCR110.DLL,
causing random, invalid stuff being written in that address.
This will fix this test when built with Visual Studio 2012.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
Make it possible to skip the terminal-launching test simply
by setting DISPLAY= . Previously, you had to unset DISPLAY,
which is a little more cumbersome.
https://bugzilla.gnome.org/show_bug.cgi?id=711178
One testcase was launching appinfo-test from a GAppInfo that
does not have a filename. In this case, the G_LAUNCHED_DESKTOP_FILE
envvar is not exported. Make appinfo-test deal with that, without
spewing warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=711178
The actions test tests the GSimpleActionGroup API. Maybe this
should be moved to use GActionMap, but for now, just disable
the deprecations.
There was also one test that wasn't actually hooked up, so
do that as well.
Just copy the schemas to the builddir and compile them in place instead
of trying to mess around with creating the compiled file in a different
dir. This solves issues in the summary/description testcase when
GSettings expects the usual situation of having the .xml files present
in the same directory.
We need to check for the correct line endings on Windows (\r\n) for the
echo tests and currently need to skip the test_echo_eof test there, as
it depends on the cat utility that is not normally found on Windows, and
using an external installation of cat via MSYS or Cygwin would render the
test program to hang as cat waits for user input.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
Various tests were depending on local_error being set by a callback
when it could never have been the case. Simplify async error detection
logic in those cases, and fix leak of GError.
https://bugzilla.gnome.org/show_bug.cgi?id=711802
We had a GApplication testcase that handled both open and commandline.
This only way that this worked was by implementing the commandline
handler without actually setting the HANDLES_COMMAND_LINE flag.
This behaviour is now invalid, so just rip out the offending part of the
test.
https://bugzilla.gnome.org/show_bug.cgi?id=711099
Include unistd.h only on *NIX and define items as necessary on Windows,
also replace instances of ssize_t with the GLib-equivilant gssize so to fix
the build on platforms that do not have ssize_t, such as Visual C++.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
We need to use g_content_type_get_mime_type() to look up the mime type of
the file from the registry on the content type that was acquired on
Windows, as g_file_info_get_content_type() does not acquire the
file mime type (unlike on *NIX).
g_content_type_get_mime_type() on *NIX is more or less an no-op as it
simply returns the g_strdup()-ed version of the passed-in content type.
This will enable the resources test to pass on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
The overridden implementation of the skip method for
GLocalFileInputStream allows skipping past the end of the file which is
inconsistent with the documentation. Prevent this by first seeking to
the end of the file and then seeking backwards from there as much as
is necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=711048
If the goal is to make sure we don't have a dbus connection, it has
to call g_test_dbus_unset() instead which is much more complete.
In this case, g_test_dbus_unset() is called already, so it should be
fine.
https://bugzilla.gnome.org/show_bug.cgi?id=697348
This is to avoid having again the subtil bug in dbus-appinfo.c:
session_bus_down() was called before g_test_run() so the test was
running on the user's dbus session.
https://bugzilla.gnome.org/show_bug.cgi?id=697348
The G_ADD_PRIVATE() macro, and the auto-generated get_instance_private()
internal function, should be used conditionally depending on the maximum
allowed version of GLib, as defined by the GLIB_VERSION_MAX_ALLOWED
pre-processor symbol.
This allows generating code that can be compiled in projects that wish
to use an older API version of GLib through the use of the
GLIB_VERSION_MAX_ALLOWED symbol.
https://bugzilla.gnome.org/show_bug.cgi?id=710133
This code was added for use by the G_FILE_ATTRIBUTE_THUMBNAIL_IS_VALID
file attribute, but may end up being used elsewhere (e.g. in GVfs) as well.
As it’s dealing with untrusted external files, and the non-trivial PNG file
format, this commit adds several test cases to cover valid and invalid PNG
files.
The security model for the thumbnail verification code is that the user’s
cache directory is untrusted, and potentially any PNG file which is passed
to the verifier has been manipulated arbitrarily by an attacker.
This is a follow-up to commit fe7069749f.
https://bugzilla.gnome.org/show_bug.cgi?id=709898
It is our intention that memory output streams should operate in two
distinct modes, depending on if a realloc function was provided or not.
In the case that we have a realloc function (resizable mode), we want
the stream to behave as if it were a file that started out empty. In
the case that we don't have a realloc function (fixed-sized mode), we
want the stream to behave as a block device would.
To this end, we introduce two changes in functionality:
- seeking to SEEK_END on a resizable stream will now seek to the end of
the valid data region, not to the end of the allocated memory (which
is really just an implementation detail)
- seeks past the end of the allocated memory size are now permitted,
but only on resizable streams. The next write will grow the buffer
(inserting zeros between).
Some tweaks to testcases were required in order not to break the build,
which indicates that this is an API break, but it seems unlikely that
anyone will be effected by these changes 'in the real world'.
Updates to documentation and further testcases are in following commits.
Based on a patch from Maciej Piechotka <uzytkownik2@gmail.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=684842
Over many years of writing code interacting with subprocesses, a pattern
that comes up a lot is to run a child and get its output as UTF-8, to
put inside a JSON document or render in a GtkTextBuffer, etc.
It's very important to validate at the boundaries, and not say deep
inside Pango.
We could do this a bit more efficiently if done in a streaming fashion,
but realistically this should be OK for now.
We weren't closing the streams after we were done reading or writing,
which is kind of essential. The easy way to fix this is to just use
g_output_stream_splice() to a GMemoryOutputStream rather than
hand-rolling it. This results in a substantial reduction of code
complexity.
A second serious issue is that we were marking the task as complete when
the process exits, but that's racy - there could still be data to read
from stdout. Fix this by just refcounting outstanding operations.
This code, not surprisingly, looks a lot like the "multi" test.
Next, because processes output binary data, I'd be forced to annotate
the char*/length pairs as (array) (element-type uint8). But rather than
doing that, it's *far* simpler to just use GBytes.
We need a version of this that actually validates as UTF-8, that will be
in the next patch.
There are a number of nice things this class brings:
0) Has a race-free termination API on all platforms (on UNIX, calls to
kill() and waitpid() are coordinated as not to cause problems).
1) Operates in terms of G{Input,Output}Stream, not file descriptors
2) Standard GIO-style async API for wait() with cancellation
3) Makes some simple cases easy, like synchronously spawning a
process with an argument list
4) Makes hard cases possible, like asynchronously running a process
with stdout/stderr merged, output directly to a file path
Much rewriting and code review from Ryan Lortie <desrt@desrt.ca>
https://bugzilla.gnome.org/show_bug.cgi?id=672102
Rather than having lots of obscure platform-based #ifdefs all over
gio, define some macros in gcredentialsprivate.h, and use those to
simplify the rest of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=701482
Previously, no testcases tested the close flags of
g_output_stream_splice_async. This patch adds tests for that and
also tests various combinations of threaded and non-threaded
GInputStream async reads and GOutputStream async writes.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Make use of __wgetmainargs() on Windows so that we can get wide char
versions of the argv's that are passed in when this test program is being
invoked. This is necessary as one might enter non-ASCII, such as
CJK characters filenames and/or directories to run the test program
against, so that we can process the name(s) and pass the proper
UTF-8-encoded name(s) of the files/directories that is being tested.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
Virtaal installs a mime package for various .po-like file formats, one
of which has the extension .txt. This causes GLib to report ".txt"
files still as "text/plain" but no longer with complete certainty.
The result is that asserting !uncertain during the testsuite causes the
test to fail if Virtaal happens to be installed.
Remove this assertion.
GNetworkAddress was allowing IPv6 scope ids in g_network_address_new()
/ g_network_address_parse(), but not in g_network_address_parse_uri().
Fix that.
Part of https://bugzilla.gnome.org/show_bug.cgi?id=669724
Convert {glib,gobject,gio}/tests to use the automake TAP driver
and test harness instead of gtester. To do so, we add a glib-tap.mk
that provides the same interface as glib.mk, except for the
reporting and coverage testing functionality. Eventually, we may
want to replace glib.mk with it. I've not yet converted the
toplevel tests/ directory, since it mixes gtestutils tests with
other binaries.
https://bugzilla.gnome.org/show_bug.cgi?id=692125
With UDP sockets, g_socket_bind() with allow_reuse=TRUE on Linux
behaved in a way that the documentation didn't suggest, and that
didn't match other OSes. (Specifically, it allowed binding multiple
multicast sockets to the same address.)
Since this behavior is useful, and since allow_reuse didn't have any
other meaning with UDP sockets, update the docs to reflect the Linux
behavior, and make it do the same thing on non-Linux.
https://bugzilla.gnome.org/show_bug.cgi?id=689245
When running a task in a thread, GTask may still be internally holding
a ref on the task in that thread even after the callback is called in
the original thread (depending on thread scheduling). Fix the test to
handle that by using a weak notify that signals a GCond, and wait for
that GCond from the main thread. (And add a corresponding check to
test_return_on_cancel().)
https://bugzilla.gnome.org/show_bug.cgi?id=705152
Add a missing Name entry, and add a terminal ; to the Actions
entry in org.gtk.test.dbusappinfo.desktop. desktop-file-validate
still contains about the DBusActivatable entry and about the
missing Exec entries. The former will go away when desktop-file-validate
gets updated for the latest spec revision.
Add a fairly realistic testcase that ensures that GDesktopAppInfo with
DBusActivatable=true can successfully talk to GApplication for a variety
of purposes.
https://bugzilla.gnome.org/show_bug.cgi?id=699259
For some time, the desktop file specification has supported "additional
application actions". This is intended to allow for additional methods
of starting an app, such as a mail client having a "Compose New Message"
action that brings up the compose window instead of the folder list.
This patch adds support for this with a relatively minimal API.
In the case that the application is a GApplication and DBusActivatable,
desktop actions are translated into GActions that have been added to the
application with g_action_map_add_action(). This more or less closes
the loop on being able to activate an application with an action
invocation (instead of 'activate').
https://bugzilla.gnome.org/show_bug.cgi?id=664444
Add a new type of GAction that represents the value of a property on an
object. As an example, this might be used on the "visible-child-name"
property of a GtkStack.
https://bugzilla.gnome.org/show_bug.cgi?id=703270
It's possible to get a org.freedesktop.Properties.GetAll call even if we
have no readable properties in the introspection, in which case we
should return the empty list in the usual way.
We should certainly _not_ be dispatching to the method call handler of
an interface which has no properties (since it will not be expecting
this).
Add a check to make sure that there is at least one readable property
before assuming that a NULL get_property handler implies that we want to
handle properties asynchronously.
Add a testcase that was failing before the change and works after it.
https://bugzilla.gnome.org/show_bug.cgi?id=703437
The existing advice in the documentation to "simply" register the
"org.freedesktop.DBus.Properties" interface if you want to handle
properties asynchronously is pretty unreasonable. If you want to handle
this interface you have to deal with all properties for all interfaces
on the path, and you have to do all of the checking for yourself. You
also have to provide your own introspection data.
Introduce a new convention for dealing with properties asynchronously.
If the user provides NULL for their get_property() or set_property()
functions in the vtable and has properties registered then the
properties are sent to the method_call() handler. We get lucky here
that this function takes an "interface_name" parameter that we can set
to "org.freedesktop.DBus.Properties".
We also do the user the favour of setting the GDBusPropertyInfo on the
GDBusMethodInvocation for their convenience (for much the same reasons
as they might want the already-available GDBusMethodInfo).
Add a testcase as well as a bunch of documentation about this new
feature.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
OS X's getaddrinfo() only supports IPv6 scope IDs that are interface
names, not numbers. So use if_indextoname() to get the name of an
interface and construct an address using that.
https://bugzilla.gnome.org/show_bug.cgi?id=700123
In the case that HAVE_DBUS_DAEMON was undefined (as in ostree where glib
is built before D-Bus) this test was failing. Move it inside the
HAVE_DBUS_DAEMON block.
Remove the complications that were introduced in an attempt to make the
gsettings and gschema-compile tests function as installed tests. These
tests are designed (in large part for gsettings and entirely for
gschema-compile) to test the in-tree tools and should not be testing the
system versions.
In the future we may want to move the use of the in-tree tools from the
gsettings testcase into the Makefile and install the resulting files,
allowing this testcase to run against those files, installed.
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
This should be the last users that need to be ported.
For some of the oldschool non-gtester-ified tests, we call g_test_init()
from main() because it is necessary in order to use
g_test_build_filename().
Since this feature is so utterly automake-centric, we may as well be
using the same terminology as automake itself (ie: although it's
BUILT_SOURCES, it's DIST_EXTRA, not DISTED).
Also add some comments to the enum explaining that these terms are
really corresponding directly to the automake terms.
https://bugzilla.gnome.org/show_bug.cgi?id=549783
It's a recipe for race conditions and error; on some hardware
architectures one thread isn't guaranteed to see the results
of writes from another thread without a cache flush.
https://bugzilla.gnome.org/show_bug.cgi?id=700855
The test /gdbus/connection/large_message waits for a dbus name to appear.
The dbus name is created by a another process executed in the background.
If for some reason this fails, the test will likely wait forever.
This will avoid this situation by making the test fail if the dbus service
has not appeared after 10 seconds.
https://bugzilla.gnome.org/show_bug.cgi?id=698981
Back in the far-off twentieth century, it was normal on unix
workstations for U+0060 GRAVE ACCENT to be drawn as "‛" and for U+0027
APOSTROPHE to be drawn as "’". This led to the convention of using
them as poor-man's ‛smart quotes’ in ASCII-only text.
However, "'" is now universally drawn as a vertical line, and "`" at a
45-degree angle, making them an `odd couple' when used together.
Unfortunately, there are lots of very old strings in glib, and also
lots of new strings in which people have kept up the old tradition,
perhaps entirely unaware that it used to not look stupid.
Fix this by just using 'dumb quotes' everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=700746
It tries to run glib-compile-schemas and glib-mkenums, which
we won't have in the runtime tree.
Anyways it's kind of a dumb test since the best test for
compilation tools is...compiling things, which we already
do frequently.
Although none of the in-tree GSocketConnectable types need it, other
types (like SoupAddress) may find it useful to be able to pass a URI
and a default-port to GProxyAddressEnumerator separately (the same way
you can with GNetworkAddress). So add a default-port property.
https://bugzilla.gnome.org/show_bug.cgi?id=698877
Not all systems have /usr/bin/true. Some have it in /bin/true.
Instead of trying to guess a hardcoded path to find it, let
g_app_info_create_from_commandline() internally search PATH
to find the program.
https://bugzilla.gnome.org/show_bug.cgi?id=698655
Add support for serialising a GIcon to a GVariant and deserialising the
result back to a GIcon.
This solves a number of problems suffered by the existing to_string()
API, primarily these:
- not forcing the icon to be a utf8 string means that we can
efficiently encode a PNG (ie: just give the array of bytes)
- there is no need to ensure that proper types are loaded before using
the deserialisation interface. 'Foreign' icon types will probably
emit a serialised format the deserialises to a GBytesIcon.
We additionally clearly document what is required for being a consumer
or implementation of #GIcon.
Further patches will be required to GdkPixbuf and GVfsIcon to bring
their implementations in line with the new rules (essentially: introduce
implementations of the new serialize() API).
https://bugzilla.gnome.org/show_bug.cgi?id=688820
Expand and formalise the syntax for detailed action names, adding a
well-documented (and tested) public parser API for them.
Port the only GLib-based user of detailed action names to the new API:
g_menu_item_set_detailed_action(). The users in Gtk+ will also be
ported soon.
https://bugzilla.gnome.org/show_bug.cgi?id=688954
We need to close the stream *before* applying the file modes, because
g_file_replace() allocates a temporary file. At the moment we're
applying the modes to the extant file, then immediately rename()ing
over it with the default perms.
This regressed with commit 166766a89f.
The real fix here is to have g_file_create_with_info() so that we can
atomically create a file with the permissions we want.
https://bugzilla.gnome.org/show_bug.cgi?id=696014
Commit f641699 (for bug 675333) introduced a check whether the Exec= program in
a .desktop actually exists. This broke the /appinfo/mime/* test cases which use
executable names like "my_app".
Use real ones instead (like "echo" and "sleep"), and add a new
/appinfo/mime/ignore-nonexisting test case which verifies that
g_desktop_app_info_new() indeed ignores nonexisting executables.
https://bugzilla.gnome.org/show_bug.cgi?id=695191
Some (broken) toolchains for example trip up
-Werror=missing-prototypes in system headers. This patch allows
people to skip the formerly hardcoded "baseline" warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=694757
If a GNetworkAddress is created with a hostname like "fe80::xxx%em1",
make sure that the scope_id corresponding to "em1" is present in the
GSocketAddresses it returns when used as a GSocketConnectable.
https://bugzilla.gnome.org/show_bug.cgi?id=684404
Add GSimpleProxyResolver, for letting people do static proxy
resolution, and to use as a base class for other resolvers (such as
GProxyResolverGnome).
https://bugzilla.gnome.org/show_bug.cgi?id=691105
Add a proxy-resolver property to GSocketClient, to allow overriding
proxy resolution in situations where you need to force a particular
proxy rather than using the system defaults.
https://bugzilla.gnome.org/show_bug.cgi?id=691105
This is a GLib reimplementation of dbus_address_escape_value().
It's useful if you want to construct a D-Bus address from pieces:
for instance, if you have a listening Unix socket whose path is known,
and you want to connect a D-Bus peer to it.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=693673
Reviewed-by: Colin Walters <walters@verbum.org>
[amended to add Since: 2.36 as per review]
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
While compiling, libtool will say that undefined symbols are not allowed, and
will refuse to make you a dll. This is only one line, easy to miss. And it
doesn't prevent `make' from completing successfully.
The code this patch adds is from other Makefile.am files that use
$(no_undefined). It's absence in gio is, most likely, an oversight.
Fixes#692058
The flowinfo and scope_id fields of struct sockaddr_in6 are in host
byte order, but the code previously assumed they were in network byte
order. Fix that.
This is an ABI-breaking change (since before you would have had to use
g_ntohl() and g_htonl() with them to get the correct values, and now
that would give the wrong values), but the previous behavior was
clearly wrong, and no one ever reported it, so it is likely that no
one was actually using it.
https://bugzilla.gnome.org/show_bug.cgi?id=684404
Add read_async() and skip_async() tests to buffered-input-stream.
Fix and re-enable filter-streams's existing close_async() tests, and
add read_async(), skip_async(), and write_async() tests as well. Also,
redo the tests to use dummy GFilterInputStream and GFilterOutputStream
subclasses rather than GBufferedInput/OutputStream, so that we're
testing the base filter stream implementations of everything (since
the buffered stream overrides are already getting tested in the
buffered-input-stream and buffered-output-stream tests anyway).
Add a skip_async() test to unix-streams. (This one would crash without
the bugfix in the previous commit.)
We only want to control the default visibility for our five main
installable libraries: libglib, libgthread, libgmodule, libgobject,
libgio. We should therefore only set -fvisibility=hidden when building
those.
Use a separate substitution variable for this purpose.
Using CFLAGS directly leads to some modules built in testcases not
exporting their symbols (and then the tests fail). It also affects the
fam file monitoring module.
Colin had originally done it this way in his visibility patch series but
I failed to understand why so I didn't copy it. Now I do.
Also: revert changes made to two testcases in an attempt to work around
this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=691756
One of our testcases builds a small giomodule for testing the loading of
modules containing resources. Unfortunately, this module gets built
using the same CFLAGS as the rest of GLib, including the visibility
flags (defaulting to hidden).
Use "config.h" to get a declaration of _GLIB_EXTERN that will export
symbols properly and use it to annotate the necessary APIs.
Some OS (e.g. OpenBSD) do not implement IP v4-mapped addresses. When
this is the case, then we get a "Connection refused", so force the test
to pass to that further tests can run.
https://bugzilla.gnome.org/show_bug.cgi?id=686058
a5876e5f made GMemoryInputStream subclassable, but accidentally broke
read_async() and skip_async() in the process. The immediately
following e7983495 fixed read_async() (and added a test for it), but
skip_async() accidentally got... skipped.
Fix it now and add a test for it.
Also, GMemoryInputStream's skip_async() was assuming that skip() could
never fail, which is true of its own implementation, but might not be
true of a subclass's, so do proper GError handling too.
This will let us drop the dbus-python dependency.
The C version does not 100% reproduce all the hash table
and array manipulation of the python version, but the tests
do not rely on it anyway.
This greatly simplifies the test since everything is now in a single
process and possible bugs / quirks in libdbus-1 will not interfere
with the tests. On the other hand, we no longer test interoperability
with libdbus-1. This is somewhat moot, however, since other tests that
involve a message bus (e.g. GTestDBus users which include most of the
GDBus test suite itself) will test this.
Also ensure that we don't pollute existing D-Bus keyrings for the
DBUS_COOKIE_SHA1 authentication method (e.g. files in the
~/.dbus-keyrings directory) by setting the environment variables
G_DBUS_COOKIE_SHA1_KEYRING_DIR and
G_DBUS_COOKIE_SHA1_KEYRING_DIR_IGNORE_PERMISSION.
All in all, this change avoids some thorny issues where the GDBus and
libdbus-1 implementations disagree on whether an item in the D-Bus
keyring is still valid (items have an age etc.). In reality, since the
DBUS_COOKIE_SHA1 authentication method is never used in production,
this is never hit in production. This bug was, however, frequently hit
if you just ran the test suite repeatedly for 15 minutes or so.
Also add TODO items to mention that we currently don't test corner
cases involving
- DBUS_COOKIE_SHA1 timeouts
- libdbus-1 interoperability
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
If tasks block waiting for other tasks to complete then the system can
end up starved for threads. Avoid this by bumping up max-threads in
that case.
This also reverts 7b1f8c58 and reverts max-threads for GTask's
GThreadPool back to 10.
https://bugzilla.gnome.org/show_bug.cgi?id=687223
This is a new convenience method designed to simplify some use
cases of GFileEnumerator, by making it easy to get the next file
from a file enumerator.
https://bugzilla.gnome.org/show_bug.cgi?id=690083
Install a public "gnetworking.h" header that can be used to include
the relevant OS-dependent networking headers. This does not really
abstract away unix-vs-windows however; error codes, in particular,
are incompatible.
gnetworkingprivate.h now contains just a few internal URI-related
functions
Also add a g_networking_init() function to gnetworking.h, which can be
used to explicitly initialize OS-level networking, rather than having
that happen as a side-effect of registering GInetAddress.
https://bugzilla.gnome.org/show_bug.cgi?id=623187
The three processes this test creates need to be executed
in order, and g_usleep was used to guarantee that.
However, under heavy load, that is not enough. Instead,
wait until the children start by making sure they have
written to stdout before proceeding any further.
https://bugzilla.gnome.org/show_bug.cgi?id=664627
Really, the memory output stream API is too warped around the model
where it's a fixed size buffer that you've already allocated. Even in
C, I find myself always wanting to use it to just accumulate data into
an arbitrary-sized buffer it allocates.
Unfortunately, it's also not usable from bindings because it's not
common to bind g_free() and g_realloc(), but if you just pass NULL, you
get the default of a fixed size, which is useless as per above.
I am going to use this from a gjs test case, and the GSubprocess test
cases also will use it.
https://bugzilla.gnome.org/show_bug.cgi?id=688931
Darwin's poll doesn't change revents if there are no available events, though it returns 0. Initialize the fd.revents to 0 so that the test passes.
That reveals a test failure, though, because with socket streams it takes time for an event to pass through the socket. Provide an 80-usec delay to allow time for the propagation.
Allow GDBusObjectManagerClient to work on peer to peer DBus
connections. Don't require that a unique bus name is available
for the object manager, if the owned bus name is NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=686920
Sometimes the poll duration in the /socket/timed_wait test is slightly
bigger than the requested 100000, causing failures like:
GLib-GIO:ERROR:socket.c:620:test_timed_wait:
assertion failed (poll_duration < 110000): (110057 < 110000)
Adjust the test to allow some jitter in the "too high" direction.
https://bugzilla.gnome.org/show_bug.cgi?id=686458
Very many testcases, some GLib tools (resource compiler, etc) and
GApplication were calling g_type_init().
Remove those uses, as they are no longer required.
https://bugzilla.gnome.org/show_bug.cgi?id=686161
GTask is a replacement for GSimpleAsyncResult and GIOScheduler, that
also allows for making cancellable wrappers around non-cancellable
functions (as in GThreadedResolver).
https://bugzilla.gnome.org/show_bug.cgi?id=661767
This is the expected (and sane) behavior - without this bug-fix you'd
have to add "Since" to every member of a newly added D-Bus interface.
Also show-case this in the codegen example.
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
Adding the --sourcedir option fixes these:
/path/to/src/gio/tests/test2.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
/path/to/src/gio/tests/test3.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
/path/to/src/gio/tests/test4.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
/path/to/src/gio/tests/test.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
The test was assuming that all cancelled ops would finish within a
certain amount of time, but this often failed under valgrind. Instead,
just run the loop until all of the ops have actually finished.
https://bugzilla.gnome.org/show_bug.cgi?id=682560
On slower platforms, the overhead of the 240 D-BUS Sleep calls is larger than
the current maximum of 6 seconds. A run on a Panda board sometimes fails with
ERROR:/build/buildd/glib2.0-2.33.8/./gio/tests/gdbus-threading.c:409:test_method_calls_on_proxy:
assertion failed (elapsed_msec < 6000): (7365 < 6000)
Bump maximum time to 8 seconds to be more resilient to this.
https://bugzilla.gnome.org/show_bug.cgi?id=682222
Because it now handles EINTR. And we should do so. While most people
use Linux, which tries very hard to avoid propagating EINTR back up
into userspace, it can still happen.
https://bugzilla.gnome.org/show_bug.cgi?id=682833
The async test had several problems:
- It created a proxy and did not launch a main loop, meaning that its
callback would usually not get called, or, if it did get called, the
test harness would have taken down the connection already, causing an
assertion failure when the proxy had an error.
- It was dependent on the proxy test to set up the server and would fail
because some properties were modified by that test.
https://bugzilla.gnome.org/show_bug.cgi?id=674805
* In order to add contstruct properties to an abstract base
calls, and retain ABI stability, the base class must add a
default implementation of those properties.
* We cannot add a default implementation of certificate-bytes
or private-key-bytes since certificate and private-key properties
are writable on construct-only.
This reverts commit 541c985869.
https://bugzilla.gnome.org/show_bug.cgi?id=682081
Implement test case suggested by Ryan Lortie on bug:
https://bugzilla.gnome.org/show_bug.cgi?id=679288
"There is a potential race here that's really unlikely to happen, but
here we go: We are trying to read from the same socket in two threads.
Some data comes. That causes the poll() in both threads (above) to
finish running. Then the cancellable is checked above. We now find
ourselves here. Only one thread will read the data. The other will
block on this function. Then the user may cancel the cancellable while
we are blocked here, but we will stay blocked...."
test_create_delete() assumes that if it creates a file and then
immediately deletes it, that the file monitor will notice this and
record it as a create followed by a delete. But that won't work with
GPollFileMonitor, which will just think nothing changed. So skip the
test in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=669331
This looks like it was stubbed out but not implemented; the vtable
entry dates to commit 3781343738 which
is just alex's initial merge of gio into glib.
I was working on some code that wants an asynchronous rm -rf
equivalent, and so yeah, this is desirable.
https://bugzilla.gnome.org/show_bug.cgi?id=680760
Add a test that the decompressor input streams handle truncated data
correctly. (They do; I wrote the test thinking there was a bug there,
but there isn't.)
Also, rename the "corruption" tests to "roundtrip", since "corruption"
makes it sound like we're testing how the converters deal with
corrupted data, as opposed to merely testing that they don't corrupt
data themselves. And fix the bug reference.
Many (if not "almost all") programs that spawn other programs via
g_spawn_sync() or the like simply want to check whether or not the
child exited successfully, but doing so requires use of
platform-specific functionality and there's actually a fair amount of
boilerplate involved.
This new API will help drain a *lot* of mostly duplicated code in
GNOME, from gnome-session to gdm. And we can see that some bits even
inside GLib were doing it wrong; for example checking the exit status
on Unix, but ignoring it on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=679691
For a D-Bus property with name "Type" (fairly common), we used to
generate a GObject property with name "type-" and C accessors
get_type_() (to avoid clashing with the GType getter), set_type_()
(for symmetri).
However, the rules for GObject property names are fairly rigid and
specifically prohibit names ending in a dash.
Therefore change things so the chosen GObject property name is "type"
but preserve the naming rules for the C getter and setter (for the
same reasons: avoiding name clashing and symmetri).
This change does break the API of generated code (but only on the
GObject property level, the C symbols are not changed) but strictly
speaking the behavior was undefined since "type-" was an invalid
GObject property name.
Also add a test case for this.
Bug 679473.
https://bugzilla.gnome.org/show_bug.cgi?id=679473
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
After fixing bug 674452 this test case now reliably fails, as "ABC abc" is text
and definitively not PowerPoint. It previously worked as g_content_type_guess()
was reading beyond the boundary of the data due to specifying -1 as data
length.
Update that test case to expect a PO template instead, and add two more with a
definitive PO template syntax and some binary data. We do not currently have a
MIME magic for PowerPoint, so we cannot actually detect it with certainty, but
at least make sure that the returned MIME type is correct.
https://bugzilla.gnome.org/show_bug.cgi?id=678941
g_content_type_guess() requires specifying a valid data length. Fixes a
segfault when running the test.
Also add an explicit check for this and return XDG_MIME_TYPE_UNKNOWN when
data_size is specified as -1, to avoid crashing.
https://bugzilla.gnome.org/show_bug.cgi?id=674452
Sometimes the poll duration in the /socket/timed_wait test is slightly lower
than the requested 100000, causing failures like
ERROR:/build/buildd/glib2.0-2.33.2/./gio/tests/socket.c:619:test_timed_wait:
assertion failed (poll_duration > = 100000): (99240 >= 100000)
FAIL
Adjust the test to also allow some jitter in the "too small" direction, similar
to the already existing span for "slightly too large".
https://bugzilla.gnome.org/show_bug.cgi?id=678881
make sure the proxy threads are in the "waiting for a connection"
state when we do the final cleanup, or else there are race conditions
involving which thread processes the GCancellable cancellation first.
