On Linux the error will be `G_IO_ERROR_CONNECTION_REFUSED`, but on macOS
it will be `G_IO_ERROR_TIMED_OUT`. Both errors seem reasonable to me, so
let’s not specifically require one of them.
See: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/4104#note_2161451
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
This should test the limits of loading 4GB files on i386 platforms, such
as the Hurd CI runner. On such platforms, `sizeof(size_t) == 4`.
This should fix the compiler warning from
https://gitlab.gnome.org/GNOME/glib/-/jobs/3989442:
```
../gio/tests/file.c:2931:51: error: left shift count >= width of type [-Werror=shift-count-overflow]
2931 | static const gsize testfile_4gb_size = ((gsize) 1 << 32) + (1 << 16); /* 4GB + a bit */
| ^~
cc1: all warnings being treated as errors
```
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
They take too long to include in a normal test run. They’ll still be run
in CI once a week as part of our scheduled slow test job.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
The tests - one for sync, one for async - create a sparse file for
this purpose, so this should be cheap on the fileystem.
Of course, the test still allocates >4GB of memory for the data that it
returns from g_file_load_contents(), I hope the CI test runners can deal
with that.
GByteArray is limited to 4GB in size and the current code silently
overflows when that happens.
Replace both load_contents() and load_contents_async() implementations
with a version that uses realloc() and gsize to maintain the array.
Previously it was mapped (as a default) to `G_IO_ERROR_FAILED`.
It’s the error that macOS returns when trying to connect to a socket which
is bound but not listened to. Linux returns `ECONNREFUSED` in this case.
It’s helpful if they both map to the same `GIOError` value.
This should fix the `/socket-client/connection-fail` test on macOS,
which is currently
[failing](https://gitlab.gnome.org/GNOME/glib/-/jobs/3970547) with:
```
# GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt
# GLib-GIO-DEBUG: GSocketClient: Connection attempt failed: Can't assign requested address
# GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration
# GLib-GIO-DEBUG: GSocketClient: Address enumeration completed (out of addresses)
# GLib-GIO-DEBUG: GSocketClient: Address enumeration failed: (null)
# GLib-GIO-DEBUG: GSocketClient: Connection failed: Could not connect to localhost: Can't assign requested address
not ok /socket-client/connection-fail - GLib-GIO:ERROR:../gio/tests/gsocketclient-slow.c:231:test_connection_failed: assertion failed (local_error == (g-io-error-quark, 39)): Could not connect to localhost: Can't assign requested address (g-io-error-quark, 0)
Bail out!
```
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
See: #3184Fixes: #3394
Once the task is completed (and `g_task_return_*()` has been called),
the task is no longer needed. It would make more sense to unref it in
`complete_connection_with_error()`, where `g_task_return_*()` is called,
but that complicates other call sites significantly, so I didn’t do it.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3184
Almost identically to the previous commit, fix a similar latent bug in
`g_dbus_connection_export_action_group()`, which was not ready to handle
the fledgling `GActionGroupExporter` being freed early on an error
handling path.
See the previous commit message for details of the approach.
This includes a unit test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3366
This latent bug wasn’t triggered until commit 3f30ec86c (or its
cherry-pick onto `glib-2-80`, 747e3af99, which was first released in
2.80.1).
That change means that `g_menu_exporter_free()` is now called on the
registration failure path by `g_dbus_connection_register_object()`
before it returns. The caller then tries to call `g_slice_free()` on the
exporter again. The call to `g_menu_exporter_free()` tries to
dereference/free members of the exporter which it expects to be
initialised — but because this is happening in an error handling path,
they are not initialised.
If it were to get any further, the `g_slice_free()` would then be a
double-free on the exporter allocation.
Fix that by making `g_menu_exporter_free()` robust to some of the
exporter members being `NULL`, and moving some of the initialisation
code higher in `g_dbus_connection_export_menu_model()`, and removing the
duplicate free code on the error handling path.
This includes a unit test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3366
In glocalfile we're allocating some temporary strings but we don't free
them on early returns, so free them once done and unset the variables
to prevent them being used incorrectly.
We're now caching arg0 but such value is not cleared when a new body is
set as it's in the connection filter test cases where we've a leak as
highlighted by both valgrind and leak sanitizer
In a D-Bus-Specification-compliant message bus, the owner of a well-known
name is a unique name. However, ibus has its own small implementation
of a message bus (src/ibusbus.c) in which org.freedesktop.IBus is
special-cased to also have itself as its owner (like org.freedesktop.DBus
on a standard message bus), and connects to that bus with the
G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION flag. The ability to do
this regressed when CVE-2024-34397 was fixed.
Relax the checks to allow the owner of a well-known name to be any valid
D-Bus name, even if it is not syntactically a unique name.
Fixes: 683b14b9 "gdbus: Track name owners for signal subscriptions"
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/3353
Bug-Debian: https://bugs.debian.org/1070730
Bug-Debian: https://bugs.debian.org/1070736
Bug-Debian: https://bugs.debian.org/1070743
Bug-Debian: https://bugs.debian.org/1070745
Signed-off-by: Simon McVittie <smcv@debian.org>
The test case assumes signals will dispatched in a different order than
they're subscribed. In fact, signals can be dispatched in any order,
and are often dispatched in order.
This commit reorders the subscriptions so they're in order, which is
more logical, and also changes the code to only exit the event loops
when there are no pending handlers ready to dispatch.
(cherry picked from commit 47866d252f)
GDBusConnection sends each signal to recipients in a separate idle
callback, and there's no particular guarantee about the order in which
they're scheduled or dispatched. For the NameOwnerChanged signal that
reports the name becoming unowned, it's possible that g_bus_watch_name()
gets its idle callback called before the GDBusProxy:g-name-owner
machinery has updated the name owner, in which case the assertion
will fail.
Fixing GNOME/glib#3268 introduced a new subscription to NameOwnerChanged
which can alter the order of delivery, particularly in the case where
G_DBUS_PROXY_FLAGS_NO_MATCH_RULE was used (as tested in
/gdbus/proxy/no-match-rule). The resulting test failure is intermittent,
but reliably appears within 100 repetitions of that test.
Fixes: 511c5f5b "tests: Wait for gdbus-testserver to die when killing it"
Signed-off-by: Simon McVittie <smcv@debian.org>
If the file to be added is on a read-only filesystem, opening read/write
will fail with EROFS. In this case we should fall back to opening it
read-only, the same way we already do if write access is forbidden by
DAC or MAC.
An easy way to reproduce this test failure is to build and test GLib
in a podman container, with its source code read-only and its build
directory read/write:
podman run --rm -it \
-v $(pwd):$(pwd):ro \
-v $(pwd)/_build:$(pwd)/_build:rw \
-w $(pwd) ...
Before this commit, the dbus-appinfo test would fail, because opening
${srcdir}/gio/tests/org.gtk.test.dbusappinfo.flatpak.desktop read/write
would fail with EROFS.
For completeness, give similar handling to the other error codes
documented in Linux open(2) that might succeed if re-attempted using
read-only access: according to that documentation, we could get EPERM
if opening read/write is prevented by fcntl F_ADD_SEALS, or ETXTBSY
if the file is an executable that is currently being run.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This was a bug that existed during development of this branch; make sure
it doesn't come back.
This test fails with a use-after-free and crash if we comment out the
part of name_watcher_unref_watched_name() that removes the name watcher
from `map_method_serial_to_name_watcher`.
It would also fail with an assertion failure if we asserted in
name_watcher_unref_watched_name() that get_name_owner_serial == 0
(i.e. that GetNameOwner is not in-flight at destruction).
Signed-off-by: Simon McVittie <smcv@collabora.com>
The vulnerability reported as GNOME/glib#3268 can be characterized
as: these signals from an attacker should not be delivered to either
the GDBusConnection or the GDBusProxy, but in fact they are (in at
least some scenarios).
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268
Signed-off-by: Simon McVittie <smcv@collabora.com>
The expected result is that because TEST_CONN_SERVICE owns
ALREADY_OWNED_NAME but not (yet) OWNED_LATER_NAME, the signal will be
delivered to the subscriber for the former but not the latter.
Before #3268 was fixed, it was incorrectly delivered to both.
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268 (partially)
Signed-off-by: Simon McVittie <smcv@collabora.com>
Otherwise a malicious connection on a shared bus, especially the system
bus, could trick GDBus clients into processing signals sent by the
malicious connection as though they had come from the real owner of a
well-known service name.
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/3268
Signed-off-by: Simon McVittie <smcv@collabora.com>
We will use this in a subsequent commit to prevent signals from an
impostor from being delivered to a subscriber.
To avoid message reordering leading to misleading situations, this does
not use the existing mechanism for watching bus name ownership, which
delivers the ownership changes to other main-contexts. Instead, it all
happens on the single thread used by the GDBusWorker, so the order in
which messages are received is the order in which they are processed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This will become confusing when we start tracking the owner of a
well-known-name sender, and it's redundant anyway. Instead, track the
1 bit of data that we actually need: whether it's a well-known name.
Strictly speaking this too is redundant, because it's syntactically
derivable from the sender, but only via extra string operations.
A subsequent commit will add a data structure to keep track of the
owner of a well-known-name sender, at which point this boolean will
be replaced by the presence or absence of that data structure.
Signed-off-by: Simon McVittie <smcv@collabora.com>
No functional change, just removing some nesting. The check for whether
signal_data->subscribers is empty changes from a conditional that tests
whether it is into an early-return if it isn't.
A subsequent commit will add additional conditions that make us consider
a SignalData to be still in use and therefore not eligible to be removed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
No functional changes, except that the implicit ownership-transfer
for the rule field becomes explicit (the local variable is set to NULL
afterwards).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Subsequent changes will need to access these data structures from
on_worker_message_received(). No functional change here, only moving
code around.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Using these is a bit more clearly correct than repeating them everywhere.
To avoid excessive diffstat in a branch for a bug fix, I'm not
immediately replacing all existing occurrences of the same literals with
these names.
The names of these constants are chosen to be consistent with libdbus,
despite using somewhat outdated terminology (D-Bus now uses the term
"well-known bus name" for what used to be called a service name,
reserving the word "service" to mean specifically the programs that
have .service files and participate in service activation).
Signed-off-by: Simon McVittie <smcv@collabora.com>
On GNOME/glib#3268 there was some concern about whether this would
allow an attacker to send signals and have them be matched to a
GDBusProxy in this situation, but it seems that was a false alarm.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This somewhat duplicates test_connection_signals(), but is easier to
extend to cover different scenarios.
Each scenario is tested three times: once with lower-level
GDBusConnection APIs, once with the higher-level GDBusProxy (which
cannot implement all of the subscription scenarios, so some message
counts are lower), and once with both (to check that delivery of the
same message to multiple destinations is handled appropriately).
Signed-off-by: Simon McVittie <smcv@collabora.com>
If a connection has two signal subscriptions active for the same signal,
one with arg0 matching and one without, a signal which doesn’t contain
an arg0 value (i.e. `g_dbus_message_get_arg0()` returns `NULL`) will
cause `NULL` to be passed to `strcmp()` when checking for a match
against the signal subscription which *has* arg0 matching, causing a
crash.
Fix that by adding the obvious `NULL` check, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3342
Rather than `strdup()`ing strings when passing them into
`_xdg_glob_list_append()`, `strdup()` them *inside* the function
instead.
This avoids a leak in the case that the list entry (tuple of `data` and
`mime_type`) already exists in the list.
This has been upstreamed as
https://gitlab.freedesktop.org/xdg/xdgmime/-/merge_requests/36.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
There were a couple of functions in `GDBusConnection` which take a
`user_data` argument, but which then leak it if they error out early.
A true positive spotted by scan-build!
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
There were some error paths where it wasn’t set, returning an
uninitialised value to the caller.
Spotted by scan-build.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
The recently added libmount-based unix mount monitoring may fail when the
device exceeds inotify limits. Let's fallback to the older implementation
in case of the `mnt_monitor_get_fd` function failure. This among others
fixes tracker-miners failures caused by seccomp rules.
Fixes: https://gitlab.gnome.org/GNOME/tracker-miners/-/issues/315
With the shell in nounset mode, an error is emitted on referencing
`schemadir` as it is not initialized in all code paths.
Initialize to an empty string to fix.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
These consistently fail on scheduled CI runs, which is not helping our
ability to catch Hurd regressions.
For example, https://gitlab.gnome.org/GNOME/glib/-/jobs/3709402
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
See: #3148
The gdbus-example-objectmanager visibility header was being re-created
on reconfigure, causing a needless rebuild of gdbus tests that were
using the visibility header.
All other invocations of gen_visibility_macros are via custom_target.
If we don't do this, the --help text is formatted as though the option
did not expect an argument.
IDENTIFIER is a new translated string, but it is developer-oriented,
so a missing translation is not particularly bad. COMMAND is already
present in translations.
Signed-off-by: Simon McVittie <smcv@collabora.com>
If we don't do this, the --help text is formatted as though the option
did not expect an argument.
This introduces a new translated string, but it is developer-oriented,
so a missing translation is not particularly bad.
Signed-off-by: Simon McVittie <smcv@collabora.com>
The ref held by `data->task` may be the last one on the `GTask`. The
`GTask` stores `attempt->data` as its task data, and so when the `GTask`
is finalised, `attempt->data` is too. `connection_attempt_remove()`
needs to access `attempt->data`, so must be called before the
`g_object_unref()` in this situation.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3266
