Meson has the ability to classify tests according to "suites", a list of
tags. This is especially useful when we want to run specific sets of
tests — e.g. only GLib's tests — instead of the whole test suite. It
also allows us to classify special tests, like "slow" ones, so that we
can only run them when needed.
The previously implementation considered a file to be a mountpoint if
its parent is on a different device. / is its own parent, so by this
definition it is not a mountpoint.
But / is (generally) listed in fstab, and fstab(5) defines the
directories it contains to be mountpoints. This attribute should follow
that definition (and reasonable expectation): the root directory is a
mountpoint.
So, add a special-case for the case where the file's parent has the same
st_dev and st_ino as the file, which is true only at the root.
Test this attribute at / (only on POSIX), /proc (but only on Linux), and
at many files and directories created by the test suite (which cannot be
mountpoints).
Sometimes file monitor events may be slow to emit. Using g_idle_add
makes it less possible for events to be scheduled later than the main
loop quit, preventing test failure caused by missing events.
This fixes test failure on FreeBSD.
Kqueue isn't good at detecting rapid file creation and deletion. It
tends to miss events because events returned by the kernel don't include
filename information. Since the size of struct kevent is fixed, it is
probably not possible to extend the API to include file names without
breaking ABI. Therefore, we disables the test here to avoid test failure
that is impossible to fix in a reliable way.
The test 'file' uses non-standard '--bytes' option when running du,
which may cause error on non-GNU systems. To keep the test working,
we skips the du check as if we don't find a du command when du fails.
This test assumes the subprocess does not print anything else on stdout
other than the dbus address, otherwise g_test_trap_assert_stdout()
fails to match. But if the env running tests has G_MESSAGES_DEBUG=all
then it will also print "PATH=%s".
Fixes this build error on macOS when inside an ssh terminal:
Traceback (most recent call last):
File "[...]/gio/tests/gengiotypefuncs.py", line 23, in <module>
for line in f:
File "[...]/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 2625: ordinal not in range(128)
https://bugzilla.gnome.org/show_bug.cgi?id=796328
On non-glibc platforms gettext is provided by extra libintl dependency.
We wrongly thought libintl is an internal dependency and applications
needs to explicitly link on it, but turns out that breaks many
applications and with autotools the .pc generated actually has -lintl in
public "Libs:".
https://bugzilla.gnome.org/show_bug.cgi?id=796085
It inserted the new items one position after the given one and inserted all new items
at the same position resulting in the items being in the reverse order of the
input array.
It was decided to make these behavioural changes because this function has according to
https://codesearch.debian.net/search?q=g_list_store_splice only one real user (nautilus)
and it didn't do what one would expect from reading the documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=795307
All those logging functions already add a newline to any message they
print, so there’s no need to add a trailing newline in the message
passed to them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
The monitor_path comes from g_file_get_path(), so should be freed with
g_free() rather than free(). This makes no difference because they are
the same function in practice, but using free() is a bit confusing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
This continues one of the const-correctness fixes from the previous
commit (it needed some more transitive fixes), and reverts another of
them, since it was over-zealous.
This fixes CI failure: https://gitlab.gnome.org/GNOME/glib/-/jobs/27125.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Spotted when temporarily compiling with -Wwrite-strings. This only goes
a small way towards making the code base -Wwrite-strings–clean. It
introduces no functional changes, and fixes no bugs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
This fix undefined symbol link error when building for non-glibc
platform. Applications must link on libintl, it is not a public
dependency of libglib.
On glibc platforms libintl is a not found dependency and is just ignored
by meson, so it doesn't hurt to always have it.
https://bugzilla.gnome.org/show_bug.cgi?id=795406
g_desktop_app_info_load_from_keyfile() refuses to load .desktop files
where the executable doesn't exist. Therefore whether or not the .desktop
file added in commit 148995544 is actually considered during tests depends
on /usr/bin/flatpak being installed. This isn't a safe assumption to make,
so use /bin/sh to test filtering of "prefix" commands.
https://bugzilla.gnome.org/show_bug.cgi?id=795488
The executable name can be a useful bit of information to match on in
searches where it differs from the name (for example because the latter
is localised), but will produce surprising results where the real appli-
cation is executed by a shared binary (for example interpretors like
gjs or python, or sandboxes like flatpak).
Address this by adding a blacklist of binary names that are ignored
in search.
https://bugzilla.gnome.org/show_bug.cgi?id=795488
Add a test for monitoring an existing local file, with the
WATCH_HARD_LINKS flag specified. This would previously cause a crash;
now it doesn’t.
This test contains a FIXME where I suspect we should be getting some
additional file change notifications from changes made through the hard
link; this requires further follow up and probably further fixes to our
inotify backend.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755721
This test will only work on machines which have IPv6 enabled and have a
local IPv6 interface with ID 1. On machines which don’t (such as AWS
servers, which we run CI tests on), the GResolver tests will fail with
G_RESOLVER_ERROR_INVALID. We can’t differentiate this kind of failure
(where we’d want to skip the test) from an actual failure (where we’d
want to fail the test), so the only other option is to drop this
particular test vector. I don’t think it’s a significant loss.
This is the last fix needed to get our CI tests working reliably on
jenkins.gnome.org.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795234
There are various reasons why setting up a server might fail; it
reliably fails on AWS with IPv6 addresses (are we binding to the right
address?). Since we’re trying to test GSocket as a client, skip tests
where that happens.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795234
While 333 runs is very likely to reproduce the bug, Milan has previously
reproduced it with as few as 9 runs. Since this test will be run by the
CI machinery quite often, a lower number of runs each CI run will still
probably catch any regressions over time.
This reduces the total test runtime from 33s to 2s.
https://bugzilla.gnome.org/show_bug.cgi?id=793727
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
When using g_network_monitor_get_default() from another thread, it’s
possible for network-changed events to be processed after an instance of
GNetworkMonitor has been disposed, causing use-after-free problems.
Fix that by moving some of the initialisation into the GInitable.init()
chain, rather than in a main context idle callback.
This includes a unit test which probabilistically reproduces the bug
(but can’t do so deterministically due to it being a race condition).
Commit amended by Philip Withnall <withnall@endlessm.com> before
pushing.
https://bugzilla.gnome.org/show_bug.cgi?id=793727
When using g_settings_bind(), if a range binding triggers a range check
failure, g_settings_binding_property_changed() will return early, but it
won't cleanup properly causing some leaks. The binding will also still
be marked as 'running', which causes an assertion failure when trying to
free it:
"g_settings_binding_free: assertion failed: (!binding->running)"
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=794805
If glib-networking is installed and built with libproxy support, this
test will use it. If a proxy is set in the environment, we might get
correctly told to go through it for certain accesses. However, this isn't
going to work, because the testsuite monkeys with the network monitor to
tell it that all addresses - including the proxy - aren't reachable.
We're trying to check if adding networks to a GNetworkMonitor works in
general. Proxies just get in the way here, so let's use the built in
dummy proxy resolver which just tells us that all URLs are directly
accessible.
https://bugzilla.gnome.org/show_bug.cgi?id=794801
The `mount_monitor` variable is only set if the boolean
`with_mount_monitor` variable is set to TRUE, but the compiler does not
know that, so it'll warn when calling `g_clear_object()` even if the
clearing operation is gated with the same boolean.
Initializing with NULL does not cost us anything, and eliminates a
conditional branch.
https://bugzilla.gnome.org/show_bug.cgi?id=794732
Tighten up the validation of application IDs so they are always exactly
D-Bus well-known names. This is a slight change to the accepted format,
but since anyone using the API with an application ID which was
previously valid, but which was not a valid D-Bus well-known name, would
have received an error from D-Bus when their application tried to
register on the bus, I think this break is acceptable.
It will affect any applications which have application IDs which are not
valid D-Bus well-known names, and which use the G_APPLICATION_NON_UNIQUE
flag. From a quick search in Debian Codesearch, no C applications use
that flag.
Update the documentation to use the rules from the D-Bus specification,
including the latest advice discouraging use of hyphens:
https://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names-bus
Update the tests:
• Add the examples from the documentation to validate them.
• Especially the venerable 7-zip.org example.
• Move a couple of tests from expected-failure to expected-success:
they are valid D-Bus well-known names even if they’re a bit weird.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793400
This will make the assertion failure messages a little more useful, and
prevent the assertions being compiled out with G_DISABLE_ASSERT.
Introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793400
If calling g_subprocess_communicate() on a GSubprocess with no
stdout/stderr pipe, a critical warning would be emitted from
g_memory_output_stream_steal_as_bytes(), as it would be called on a NULL
output stream.
Fix that, improve the relevant GIR annotations, and expand the unit
tests to cover it (and various other combinations of flags).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793331
g_data_input_stream_read_upto() was introduced in 2.26; now it’s GLib
2.56, we can probably deprecate the old versions (since the handling of
consuming the stop character differs between the sync and async versions
of it).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=584284
This is a variant of g_file_get_path() which returns a const string to
the caller, rather than transferring ownership.
I've been carrying `gs_file_get_path_cached()` in libgsystem and it
has seen a lot of use in the ostree and flatpak codebases. There are
probably others too.
I think language bindings like Python/Gjs could also use this to avoid
an extra malloc (i.e. we could transparently replace
`g_file_get_path()` with `g_file_peek_path()`.
(Originally by Colin Walters. Tweaked by Philip Withnall to update to
2.56, change the function name and drop the locking.)
https://bugzilla.gnome.org/show_bug.cgi?id=767976
Custom desktop file fields may be translated, but there is currently
no non-hacky way to look up the localized value; fill get gap with
a small wrapper around g_key_file_get_locale_string().
https://bugzilla.gnome.org/show_bug.cgi?id=779413
This was introduced in bug #742997, but not added to the Makefile.am, so
it’s missing from tarballs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
https://bugzilla.gnome.org/show_bug.cgi?id=792322
