This doesn’t introduce any functional changes, but should make the code
a little clearer.
Drive-by improvements while trying to debug #1264.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1264
This introduces no functional changes, but makes it a little clearer how
the ownership of these `GDBusMessage` instances works. The free function
is changed to `g_clear_object()` to avoid the possibility of somehow
using the messages after freeing them.
Basically just some drive-by docs improvements while trying to debug
issue #1264.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1264
This didn’t actually cause any observable bugs, since the structures of
`PropertyData` and `PropertyGetAllData` were equivalent for the members
which the free function touches.
Definitely should be fixed though.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This appears to fix an intermittent failure seen when sending a D-Bus
message with either of a cancellable or a timeout set.
In particular, I can reliably reproduce it with:
```
meson test gdbus-test-codegen-min-required-2-64 --repeat 10000
```
It can be caught easily with asan when reproduced. Tracking down the
location of the refcount mismatch was a little tricky, but was
simplified by replacing a load of `g_object_ref (message)` calls with
`g_dbus_message_copy (message, NULL)` to switch `GDBusMessage` handling
to using copy semantics. This allowed asan to home in on where the
refcount mismatch was happening.
The problem was that `send_message_data_deliver_error()` takes ownership
of the `GTask` passed to it, but the
`send_message_with_replace_cancelled_idle_cb()` and
`send_message_with_reply_timeout_cb()` functions which were calling it,
were not passing in a strong reference as they should have.
Another approach to fixing this would have been to change the transfer
semantics of `send_message_data_deliver_error()` so it was `(transfer
none)` on its `GTask`. That would probably have resulted in cleaner
code, but would have been a lot harder to verify/review the fix, and
easier to inadvertently introduce new bugs.
The fact that the bug was only triggered by the cancellation and timeout
callbacks explains why it was intermittent: these code paths are
typically never hit, but the timeout path may sometimes be hit on a very
slow test run.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #1264
mkstemp-like family of functions also use g_open () under the hood so
they should pass the O_CLOEXEC flag there for race-free setting of the
close-on-exec flag.
setmntent () call uses the same mode flag set as fopen (), so it should
also include the "e" mode flag for race-free setting of the close-on-exec
flag.
All Unix CRTs examined: glibc, musl, BSDs, Apple libc, Android bionic
ignore unknown fopen () mode flags, so this flag can be added
unconditionally for Unix builds.
Only Windows CRT is intolerant of these, so the single case in
g_dbus_address_connect () where the fopen () call is shared between Unix
and Windows needs appropriate platform-specific handling.
Skipped the call sites in libcharset and xdgmime copylibs.
The `equal_func` closure can already have all required information
available without the item, and passing the item via the closure instead
of an explicit parameter is more natural for languages that have a
concept of closures that can capture variables.
Otherwise, the content of the buffer is thrown away when switching
from reading via a GDataInputStream to unbuffered reads when waiting
for the "BEGIN" line.
(The code already tried to protect against over-reading like this by
using unbuffered reads for the last few lines of the auth protocol,
but it might already be too late at that point. The buffer of the
GDataInputStream might already contain the "BEGIN" line for example.)
This matters when connecting a sd-bus client directly to a GDBus
client. A sd-bus client optimistically sends the whole auth
conversation in one go without waiting for intermediate replies. This
is done to improve performance for the many short-lived connections
that are typically made.
This reverts commit 27bee8fe5d.
Inevitably, despite testing the CI multiple times before merging commit
27bee8fe, the CI is now failing again in the `socket` test due to (what
I continue to assume is) the kernel regression:
https://gitlab.gnome.org/martinpitt/glib/-/jobs/2585332
In order to unblock development on `main` expediently, I guess I’ll just
revert the revert.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Reopens: #2879
It’s not meant to be exposed publicly yet (we’re not ready to stabilise
it), but it was incorrectly decorated with `GLIB_AVAILABLE_IN_2_76`.
We can’t remove the decorator and use it that way, as it’s called in
libgio, so we have to expose it using `GLIB_PRIVATE_CALL()`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2876
Don’t just set them when they’re true and rely on their non-presence
being evaluated to `FALSE`. That means that they erroneously don’t get
returned in `g_file_info_list_attributes()`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2907
`g_file_info_get_is_hidden()` should not be called without checking the
attribute is set first, just as with the calls higher up in this code.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2907
As documented in a previous commit, these functions should not be called
without the right attributes being present in the `GFileInfo`. Add
critical warnings to make this more obvious.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2907
It doesn’t make sense to (for example) call `g_file_info_get_name()` if
the `GFileInfo` doesn’t contain `G_FILE_ATTRIBUTE_STANDARD_NAME`, given
that building the `GFileInfo` is typically a static process and entirely
under the control of the programmer.
By being this restrictive, we avoid having to return ‘unknown’ values
for some of these standard APIs, particularly the numeric ones such as
`g_file_info_get_size()`. If APIs like that were to work correctly in
the face of a `GFileInfo` without `G_FILE_ATTRIBUTE_STANDARD_SIZE`
specified, they’d have to be able to return a value to indicate the
attribute is missing. Returning `0` or `G_MAXSIZE` to indicate that
would be ambiguous.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2907
Since gmodule-visibility.h is now a custom target and produced at
buildtime, it might not always exist in time for use in other source
files. This was the case for gio-inotify.
Add it as an additional source file to ensure in-time generation.
When gio monitors a directory, it will delete the extra "/" at the end
of the directory string, but when the directory is "/", this will cause
the modified directory string to be empty, and eventually the
monitoring will fail. The solution is to delete only if the directory
string length is greater than 1.
Currently, inbuf_size and outbuf_size are not documented as not
nullable, but they are expected to be so, which might lead to unexpected
crashes. Moreover, outbuf itself is also expected to not be null, so
this commit adds the appropriate GI annotations and early returns on
failed preconditions.
LLVM objcopy's --strip-all is more aggressive that GNU objcopy --strip-all
and will remove everything that is not actually used. In this case we
see the following error:
`error: 'gio/tests/test_resources.o': Symbol table has link index of 5 which is not a valid index`
Fix this by only removing debug symbols instead of all unused symbols and
sections.
Helps: https://gitlab.gnome.org/GNOME/glib/-/issues/2720
Unlike GNU ld which has a default target architecture, ld.lld is always a
cross-linker and has the same behaviour for all targets. If you don't tell
ld.lld what the target architecture is it can't infer the right ELF flags
for the resulting object file.
```
$ ~/cheri/output/sdk/bin/ld -r -b binary gio/tests/test5.gresource -o gio/tests/test_resources.o -v
LLD 14.0.0 (compatible with GNU linkers)
ld: error: target emulation unknown: -m or at least one .o file required
```
As you can see from the error message it can't infer the target
architecture (you need a least one valid .o file or the -m flag).
If you use the compiler instead of directly invoking the linker it will
pass the appropriate flags:
```
$ ~/cheri/output/sdk/bin/clang -r -Wl,-b,binary gio/tests/test5.gresource -o gio/tests/test_resources.o -v
clang version 14.0.0 (https://github.com/CTSRD-CHERI/llvm-project.git ff66b683475fc44355b2010dbcbe1202d785e6f8)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /home/alexrichardson/cheri/output/sdk/bin
Found candidate GCC installation: /usr/lib/gcc/x86_64-linux-gnu/10
Found candidate GCC installation: /usr/lib/gcc/x86_64-linux-gnu/11
Found candidate GCC installation: /usr/lib/gcc/x86_64-linux-gnu/12
Selected GCC installation: /usr/lib/gcc/x86_64-linux-gnu/12
Candidate multilib: .;@m64
Selected multilib: .;@m64
"/home/alexrichardson/cheri/output/sdk/bin/ld" --eh-frame-hdr -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -o gio/tests/test_resources.o -L/usr/lib/gcc/x86_64-linux-gnu/12 -L/usr/lib/gcc/x86_64-linux-gnu/12/../../../../lib64 -L/lib/x86_64-linux-gnu -L/lib/../lib64 -L/usr/lib/x86_64-linux-gnu -L/usr/lib/../lib64 -L/home/alexrichardson/cheri/output/sdk/bin/../lib -L/lib -L/usr/lib -r -b binary gio/tests/test5.gresource
❯ file gio/tests/test_resources.o
gio/tests/test_resources.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
```
This works for most architectures, but ones that need additional metadata
sections to encode the used ABI, etc. will require a different approach
using .incbin. However, that is a change for another MR.
Partially fixes: https://gitlab.gnome.org/GNOME/glib/-/issues/2720
In case the OS does not support epoll and kqueue, we get the warning:
gio/tests/pollable.c: In function ‘test_pollable_unix_nulldev’:
gio/tests/pollable.c:266:7: warning: unused variable ‘fd’
[-Wunused-variable]
266 | int fd;
Get rid of it.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Now that there is g_string_free_and_steal (), we can use it instead of
the older g_string_free (_, FALSE). Make sure to use its return value
while doing so, as opposed to manually accessing string->str, to avoid
compiler warnings and make the intent more explicit.
This is all done in preparation for making g_string_free (_, FALSE) warn
on unused return value much like g_string_free_and_steal (), which will
happen in the next commit.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Spawning a process correctly is a lot more complicated than just bunging
an argument onto the return value from this function.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2901
Fix the tests, by allocating the structure.
==121338==ERROR: AddressSanitizer: stack-use-after-scope on address 0x7ffe44018610 at pc 0x00000040ff71 bp 0x7ffe440178f0 sp 0x7ffe440178e8
READ of size 8 at 0x7ffe44018610 thread T0
#0 0x40ff70 in test_launch_uris_with_terminal ../gio/tests/desktop-app-info.c:1393
#1 0x7efd97b831e8 in test_case_run ../glib/gtestutils.c:2947
#2 0x7efd97b831e8 in g_test_run_suite_internal ../glib/gtestutils.c:3037
#3 0x7efd97b82d23 in g_test_run_suite_internal ../glib/gtestutils.c:3056
#4 0x7efd97b82d23 in g_test_run_suite_internal ../glib/gtestutils.c:3056
#5 0x7efd97b82d23 in g_test_run_suite_internal ../glib/gtestutils.c:3056
#6 0x7efd97b84189 in g_test_run_suite ../glib/gtestutils.c:3136
#7 0x7efd97b842c5 in g_test_run ../glib/gtestutils.c:2248
#8 0x4055bc in main ../gio/tests/desktop-app-info.c:1901
#9 0x7efd9564a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
#10 0x7efd9564a5c8 in __libc_start_main_alias_1 (/lib64/libc.so.6+0x275c8)
#11 0x4059f4 in _start (/home/elmarco/src/gnome/glib/build/gio/tests/desktop-app-info+0x4059f4)
Address 0x7ffe44018610 is located in stack of thread T0 at offset 128 in frame
#0 0x404d1f in main ../gio/tests/desktop-app-info.c:1823
This frame has 6 object(s):
[48, 52) 'argc' (line 1821)
[64, 72) 'path' (line 1870)
[96, 104) 'argv' (line 1822)
[128, 144) '<unknown>' <== Memory access at offset 128 is inside this variable
[160, 176) '<unknown>'
[192, 288) 'supported_terminals' (line 1825)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
There’s a kernel bug on the CI machines which is causing this test to
fail all the time and it’s getting my goat.
The test can be re-enabled later (by reverting this commit) when the
kernel on the CI VM host is fixed. I don’t know when that’s going to
happen.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2879
Otherwise if, for whatever reason, the `app` loses its D-Bus name,
`g_application_quit()` is called from `name_was_lost()` before it’s
called from `quit_already()`, and then `quit_already()` does an invalid
read on `app`.
If the name was not meant to be lost at this point in the test, the
subsequent `g_assert_false (name_lost)` will catch that, so this change
shouldn’t cause the test to pass unnecessarily.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
In all these cases we don't really care about running the test file,
while building and basic execution it is relevant.
Also they don't support TAP at all.
Meson supports tap protocol results parsing, allowing us to track better
the tests that are running (and the ones that are actually skipped) without
manually parsing the test output.
However this also implies that using the verbose mode for a test doesn't
show its output by default (unless there are failures).
We may not be able to fix GTasks broken design,
but at least we should document it and not let
users stumble into this bear trap without warning.
Helps: #1346
Due to an oversight (I guess), per-desktop default values (which come
from override files such as this one:
https://github.com/endlessm/gnome-shell/blob/master/data/00_org.gnome.shell.gschema.override)
were not checked when getting a GSettings value via a `GSettingsAction`.
Per-desktop default values are correctly returned via all other
GSettings query paths (see calls to
`g_settings_schema_key_get_translated_default()`).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This reverts commit da7a31a052. The renaming of parameters implicitly introduced "closure" annotations in the documentation which are wrong on callbacks.
We cannot use `gvisibility_h` for different visibility header files; you
never know when you're going to refer to the variable again, and
projects might end up needing to retrieve the variable contents—like,
for instance, gobject-introspection using glib as a subproject.
Fix a regression that appeared after adding support for nanosecond
timestamps to set_mtime_atime(). User-visible effect: when copying a
file from a gvfs MTP mountpoint to the local filesystem, the file's
mtime is set to 0.
This behavior happens when setting G_FILE_ATTRIBUTE_TIME_MODIFIED first,
then G_FILE_ATTRIBUTE_TIME_MODIFIED_USEC. Setting the second attribute
ends up in set_mtime_atime() with mtime_usec_value set, and mtime_value
== NULL. When mtime_value is NULL, the tv_sec part of the timestamp
should be fetched by lazy_stat(), but set_mtime_atime() fails to assign
it properly, and tv_sec stays at 0, leading to losing the main part of
the timestamp.
Fix the issue by setting times_n[1].tv_sec to the value fetched from
lazy_stat().
Fixes: b33ef610de ("Add functionality to preserve nanosecond timestamps")
Fixes: 15cb123c82 ("glocalfileinfo: don't call both utimes and utimensat")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
`search_token` cannot be `NULL` at this point (guaranteed by all the
current call sites of `desktop_file_dir_unindexed_search()`), so remove
an unnecessary `NULL` check.
Add an assertion to make the nullability clear.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Coverity CID: #1502196, #1502193
If the port is not specified, then a default port should be assumed.
This is how everybody expects URIs to work and it's how GProxyResolver
should work too.
We already have lots of tests to ensure this works as expected; however,
the documentation currently does not allow it. Change the documentation
to match reality.
Fixes#2832
When launching a registered handler we compose the command-line
string using the registered command-line template. Applications
expect files in their command-line as local paths rather than
complete URI strings.
For example,
"Program.exe" "%1"
Should expand to
"Program.exe" "C:\file.dat"
Rather than
"Program.exe" "file:///C:\file.dat"
Fixes https://gitlab.gnome.org/GNOME/glib/-/issues/2843
Substring matches can have too much unwanted results, while prefix
matches is more accurate but cannot handle some special cases, this
commit combines them by adding a match_type member, then sort and group
result with both categories and match types.
For the same category, prefix matched results will be put in the first
group and substring matched results will be put in the second group.
We eventually need to return them as an array anyways.
Sadly we can't just reuse such memory because each element is a pointer and
not a guchar, but still we can be cheaper in various operations.
I noticed this when running the test on an Arm Morello system where varargs
have bounds. g_variant_new() was trying to read an integer using va_arg(),
but since there was no argument it resulted in a bounds errors there.
On most other architectures this will just read whatever value is contained
in the next argument register and is not something that ASan can detect, so
it never resulted in test failures.
When a cancellable is cancelled when we call g_cancellable_connect we
used to immediately call the provided callback, while this is fine we
actually had race in case the cancellable was about to be reset or in
the middle of a cancellation.
In fact it could happen that when we released the mutex, another thread
could reset the cancellable just before the callback is actually called
and so leading to call it with g_cancellable_cancelled() == FALSE.
So to handle this, make disconnect and reset function to wait for
connection emission to finish, not to break their assumptions.
This can be tested using some "brute-force" tests where multiple threads
are racing to connect and disconnect while others are cancelling and
resetting a cancellable, ensuring that all works as we expect.
This solves problems with validating untrusted inputs from D-Bus, where
invalid numbers of added and removed menu entries, and positions, could
be specified.
Original patch from
https://bugzilla.gnome.org/show_bug.cgi?id=728733#c7, tweaked by Philip
Withnall to add a few code comments and make
`G_MENU_EXPORTER_MAX_SECTION_SIZE` public so callers can check their
inputs against it if they want. Also tweaked to use `g_warning()` instead
of the nonexistent `g_dbus_warning()`.
Fixes: #861
If it takes one more `GMainContext` cycle than expected for the
`activate` signals to be handled, the `GApplication` under test can be
released too early, and the test will fail due to not seeing a high
enough value of `n_activations`.
Hopefully avoid that by moving the release to a low priority idle
callback.
This fix is only hopeful because I’ve only been able to reproduce the
failure on FreeBSD CI and not locally.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2835
The timeout is just to stop the test hanging forever, so there’s no need
for it to be so short. It’s caused at least one spurious CI failure:
https://gitlab.gnome.org/GNOME/glib/-/jobs/2445023.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2837
GDesktopAppInfo never failed in the most simple of the cases: when a
desktop file or a command line app info was pointing to an invalid
executable (for the context).
The reason for this is that we're launching all the programs using
gio-launch-desktop which will always exist in a sane GLib installation,
and thus our call to execvp won't ever fail on failure.
This was partially mitigated by not allowing to create a desktop app
icon using a non-existent executable (even if not fully correctly) but
still did not work in case a custom PATH was provided in the launch
context.
To avoid this, use g_find_program_for_path() to find early if a program
that we're about to launch is available, and if it's not the case return
the same error that g_spawn_async_with_fds() would throw in such cases.
While this is slowing a bit our preparation phase, would avoid to leave
to the exec function the job to find where our program is.
Add tests simulating this behavior.
We used to launch applications with terminals using the normal program
finder logic that did not consider the context path nor the desktop file
working dir. Switch to g_find_program_for_path() to find terminals so we
can ensure that both conditions are true.
Update tests to consider this case too.
The platform data comes from the parent process, which should normally
be considered trusted (if we don’t trust it, it can do all sorts of
other things to mess this process up, such as setting
`LD_LIBRARY_PATH`).
However, it can also come from any process which calls `CommandLine`
over D-Bus, so always has to be able to handle untrusted input. In
particular, `v`-typed `GVariant`s must always have their dynamic type
validated before having values of a static type retrieved from them.
Includes unit tests.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
They come from an external process, so they must be validated.
In particular, it’s always easy to forget to validate the type of a
`GVariant`, and just try to get the stored value using a well-known
type; but that’s a programming error if the `GVariant` actually stores a
different type. Always check the variant type first if loading from a
`v`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
These actions are activated as a result of receiving the `ActionInvoked`
signal from `org.freedesktop.Notifications`. As that’s received from
another process over D-Bus, it’s feasible that it could be malformed.
Without validating the action and its parameter, assertions will be hit
within the `GAction` code.
While we should be able to trust whatever process owns
`org.freedesktop.Notifications`, it’s possible that’s not the case, so
best validate what we receive.
Includes unit tests.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
This test is fairly pointless, but puts the infrastructure in place for
adding more tests for `GFdoNotificationBackend` in upcoming commits.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
Invoking an action on a notification should remove it (by default,
unless the `resident` hint is set, but GLib doesn’t currently support
that).
If, somehow, an invalid action is invoked on the notification, that
shouldn’t cause it to be removed though, because no action has taken
place. So change the code to do that.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
As with the previous commit, the arguments to `ActivateAction` have to
be validated before being passed to `g_action_group_activate_action()`.
As they come over D-Bus, they are coming from an untrusted source.
Includes unit tests for all D-Bus methods on `GApplication`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
The action name, parameter and new state are all controlled by an
external process, so can’t be trusted. Ensure they are validated before
being passed to functions which assert that they are correctly typed and
extant.
Add unit tests.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
Some applications (eg., gnome-photos) really want a large thumbnail,
if one can be created. Simply falling back to a smaller one (probably
created by an old nautilus), without giving the application a chance
to create a bigger thumbnail, is undesirable because they will appear
fuzzy.
Therefore, at separate attribute sets for all the thumbnail sizes
that are supported in the spec: normal/large/x-large/xx-large.
The old attribute will now return by default the biggest available, as
it used to be, but also including the x-large and xx-large cases.
Co-Authored-by: Marco Trevisan <mail@3v1n0.net>
Fixes: #621
In case they differ from the defaults, we probably want to ignore them
when listing filesystems which are interesting to the user.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This reworks commit 20e1508e6e, for two
reasons:
- Upstream dbus.git now does the same (although this isn’t yet reflected
in the online version of the D-Bus Specification); see
https://gitlab.freedesktop.org/dbus/dbus/-/merge_requests/209.
- It allows local-prefix (e.g. jhbuild) builds of GLib to build in a
custom prefix while still interacting with system services using the
system-wide `/run` directory. To do so, pass `-Druntime_dir=/run` to
meson configure.
As documented in the `NEWS` file in
https://gitlab.freedesktop.org/dbus/dbus/-/merge_requests/209, it’s only
valid to use `/run` – rather than `/var/run` – for D-Bus if the two
paths are interoperable. i.e. `/var/run` should be a symlink to `/run`,
and the D-Bus daemon should be configured to put its socket there.
This commit deliberately doesn’t introduce a special `system_socket`
configure option for specifying where the D-Bus system socket lives, as
that would only be useful for a distribution which sets `runstatedir` to
something other than `/var/run` or `/run`, which seems unlikely. We
could add such an option in future, though, if a distribution comes
forward with such a requirement.
See discussion on
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3095#note_1605502.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
under cygwin socklen_t is signed which leads to warnings like:
warning: comparison of integer expressions of different signedness:
‘long unsigned int’ and ‘socklen_t’ {aka ‘int’} [-Wsign-compare]
In both cases we compare against some small fixed sizes, so cast them
to socklen_t.
cygwin defines socklen_t as int, unlike everywhere else where it is uint32_t (afaics),
so signed vs unsigned.
The recently added -Werror=pointer-sign in 4353813058
makes the build fail under cygwin now with something like:
error: pointer targets in passing argument 5 of ‘getsockopt’ differ in signedness [-Werror=pointer-sign]
This changes guint to socklen_t where needed for getsockname, getpeername and getsockopt.
Do not search in path for snapctl to avoid it to be potentially
overridden by changing the PATH env variable.
Still allow testing by using an ifdef to check if we're building for the
test files or not.
Test all the snap cases and the unknown sandbox one.
We need to use different test processes as we initialize the portal
type early enough that it can't be changed later.
This is of particular use in the gsettings backend, which is currently using
dconf for all snaps.
Fully confined snaps should use the keyfile backend, as Flatpaks do.
Co-Authored-by: Marco Trevisan <mail@3v1n0.net>
Classic snaps are just a kind of packages with no sandbox at all, so
there's no point to mark them as sandboxed.
In this way we can just do IO checks once without having to multiply
them.
Co-Authored-by: Robert Ancell <robert.ancell@canonical.com>
This reverts commit 7e3e591d43.
The freedesktop SDK, which is used by gnome-build-meta, only has Meson
0.63. Bumping GLib’s Meson dependency to 0.64 means that, at the moment,
GLib is not buildable in gnome-build-meta and hence can’t be tested in
nightly pipelines against other projects, etc.
That’s bad for testing GLib.
It’s arguably bad that we’re restricted to using an older version of
Meson than shipped by Debian Testing, but that’s a separate discussion
to be had.
Revert the Meson 0.64 dependency until the freedesktop SDK ships Meson ≥
0.64. This also means reverting the simplifications to use of
`gnome.mkenum_simple()`.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3077#note_1601064
This reverts commit 19353017a7.
The freedesktop SDK, which is used by gnome-build-meta, only has Meson
0.63. Bumping GLib’s Meson dependency to 0.64 means that, at the moment,
GLib is not buildable in gnome-build-meta and hence can’t be tested in
nightly pipelines against other projects, etc.
That’s bad for testing GLib.
It’s arguably bad that we’re restricted to using an older version of
Meson than shipped by Debian Testing, but that’s a separate discussion
to be had.
Revert the Meson 0.64 dependency until the freedesktop SDK ships Meson ≥
0.64. This also means reverting the simplifications to use of
`gnome.mkenum_simple()`.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3077#note_1601064
This reverts commit 756b424cce.
The freedesktop SDK, which is used by gnome-build-meta, only has Meson
0.63. Bumping GLib’s Meson dependency to 0.64 means that, at the moment,
GLib is not buildable in gnome-build-meta and hence can’t be tested in
nightly pipelines against other projects, etc.
That’s bad for testing GLib.
It’s arguably bad that we’re restricted to using an older version of
Meson than shipped by Debian Testing, but that’s a separate discussion
to be had.
Revert the Meson 0.64 dependency until the freedesktop SDK ships Meson ≥
0.64. This also means reverting the simplifications to use of
`gnome.mkenum_simple()`.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3077#note_1601064
