GVfsUDisks2VolumeMonitor handles x-gvfs-hide/x-gvfs-show mount options
used to overwrite our heuristics whether the mount should be shown, or
hidden. Unfortunately, it works currently only for mounts with
corresponding fstab entries, because the options are read over
g_unix_mount_point_get_options. Let's introduce g_unix_mount_get_options
to allow reading of the options for all sort of mounts (e.g. created
over pam_mount, or manually mounted).
(Minor fixes to the documentation by Philip Withnall
<withnall@endlessm.com>.)
https://bugzilla.gnome.org/show_bug.cgi?id=668132
All those logging functions already add a newline to any message they
print, so there’s no need to add a trailing newline in the message
passed to them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Normally, the list of mounts is filtered to exclude mounts in
/run/media/$username where $username is not the current user. However,
root can access all the mounts under /run/media/, regardless of the
username — so there’s no point in filtering out those mounts.
In some cases, filtering them out is harmful. In the case of a system
service which uses GVolumeMonitor, for example, filtering them out means
the service cannot see automounted USB sticks belonging to user
sessions.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793994
Building against libmount installed into a non-default prefix wasn’t
working, as we were using #include <libmount/libmount.h> rather than
the correct #include <libmount.h> — all the mount.pc pkg-config files
set `Cflags: -I${includedir}/libmount`.
Fixing this while retaining the fallback support for versions of
libmount without a pkg-config file would have been tricky (we would need
to work out a suitable -I flag to set in LIBMOUNT_CFLAGS) to still be
able to use the correct #include path). Thankfully, libmount gained
pkg-config support a long time ago, so I think we can safely drop the
fallback code. In particular, Debian Jessie, Ubuntu Trusty, and CentOS 5
all ship a mount.pc file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793288
Skip accumulated events from file monitor which we are not able to handle
in a real time instead of emitting mounts_changed signal several times.
This should behave equally to GIOChannel based monitoring. See Bug 792235.
https://bugzilla.gnome.org/show_bug.cgi?id=793006
This will fix a few broken links in the documentation, and shut up a
load of gtk-doc warnings (but certainly not all of them).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790015
This is needed by gnome-control-center and gnome-settings-daemon; it
makes existing checks from gunixmounts.c public.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788927
"len" is only used by some platforms' implementations (as controlled
by various autoconf/#ifdef tokens) and only in a small codeblock in
those cases, but was declared based on a looser #ifdef heuristic and
in a larger scope. The result is an unused-variable warning when built
on some platforms. Move declaration to the local codeblocks that use
the variable, which also restricts it to the narrower set of platforms
where those codeblocks are used.
https://bugzilla.gnome.org/show_bug.cgi?id=689323
Commit 53ed180 improved mtab processing, however, also introduced bug
in code obtaining mount points. mtab was used by mistake also for
g_unix_mount_points_get implementation, which is obviously wrong and
fstab has to be used instead...
https://bugzilla.gnome.org/show_bug.cgi?id=781867
Fix get_mounts_timestamp() to not use a stat'ed mtime for /proc/ files.
Instead, use mount_poller_time if /proc/ watch is running, or otherwise
return a new generated timestamp to always assume mounts-changed, which
is safer than previous behaviour of always assuming mounts-not-changed
(as mtime never changes for /proc/ files when queried from the same
process).
We say it's safer because allows caches depending on:
g_unix_mounts_get(&time_read)
g_unix_mounts_changed_since()
to drop possibly outdated/duplicated values, as that was the case for the
GIO mounts cache used in gio/glocalfile.c which provides mount info for
g_file_query_filesystem_info() call, as described in below referenced bug.
This fix complements related commit bd9e266e11https://bugzilla.gnome.org/show_bug.cgi?id=787731
The /etc/mtab file is still used by some distributions (e.g. Slackware),
so it has to be monitored instead of /proc/self/mountinfo in order to
avoid races between g_unix_mounts_get and "mounts-changed" signal. The
util-linux is built with --enable-libmount-support-mtab in that case and
mnt_has_regular_mtab is used for checks. Let's use mnt_has_regular_mtab
also to determine which file to monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=779607
mnt_table_is_fs_mounted causes unwanted automount requests due to
canonicalization of source and target. It might be replaced by
mnt_table_find_source as per the documentation in order to prevent
the automounts, but it is redundant. All mtab entries should be already
mounted and thus mnt_table_is_fs_mounted result is always true (it
basically checks that the fs from mtab is in mtab). Let's remove
the check at all.
https://bugzilla.gnome.org/show_bug.cgi?id=781867
libmnt_context is useless. It contains cache which is useful for searching,
but it isn't used in our case. Let's use mnt_context_parse_mtab instead
directly and the mtab processing will be faster.
https://bugzilla.gnome.org/show_bug.cgi?id=781867
It's unnecessary, and only adds visual noise; we have been fairly
inconsistent in the past, but the semi-colon-less version clearly
dominates in the code base.
https://bugzilla.gnome.org/show_bug.cgi?id=669355
If we have an input parameter (or return value) we need to use (nullable).
However, if it is an (inout) or (out) parameter, (optional) is sufficient.
It looks like (nullable) could be used for everything according to the
Annotation documentation, but (optional) is more specific.
GLib has g_unix_mount_at (mount_path) already, let's add g_unix_mount_for
(file_path) for whatever path. GLib already contains some private code
for such task. Let's make this code public. This functionality is needed
by GVfs (see Bug 771431) in order to avoid copy-and-pasting.
https://bugzilla.gnome.org/show_bug.cgi?id=772160
/proc/self/mountinfo is used to monitor changes of mounts with libmount.
However, GFileMonitor is used currently to monitor this file, which
doesn't work and consequently "changed" signal is never emitted. Special
monitoring needs to be used instead, same as it is used for /proc/mounts.
https://bugzilla.gnome.org/show_bug.cgi?id=662946
Use mnt_context_get_mtab instead of using mnt_context_get_table(), since
that's the recommended way of accessing mtab/mountinfo information, and
also because that way the (struct libmnt_table *) will get automatically
deallocated when calling mnt_free_context()
https://bugzilla.gnome.org/show_bug.cgi?id=769238
GUnixMountMonitor was not threadsafe before. It was a global singleton
which emitted signals in the first thread that happened to construct it.
Move it to a per-context singleton model where each GMainContext gets
its own GUnixMountMonitor. Monitor for the changes from the GLib worker
thread and dispatch the results to each context with an active monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
Deprecate g_unix_mount_monitor_set_rate_limit() and turn it into a
no-op.
This function doesn't behave as advertised. It only controls rate
limiting for filesystem-based monitors. It has no impact over reporting
mount changes on Linux, for example, because those are based on polling
for changes in /proc (which doesn't use filesystem monitors). It also
has no impact on Mac OS because a library interface is used there.
This was added in https://bugzilla.gnome.org/show_bug.cgi?id=521946 in
order to be used by HAL, which is effectively dead. udisks no longer
uses this code at all.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
This is a singleton, but we have a function called _new() to get it.
What's worse is that the documentation makes no mention of this, and
actually specifically says that a new monitor will be created each time.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
Since all element markup is now gone from the doc comments,
we can turn off the gtk-doc sgml mode, which means that from
now on, docbook markup is no longer allowed in doc comments.
To make this possible, we have to replace all remaining
entities in doc comments by their replacement text, & -> &
and so on.
