Commit Graph

99 Commits

Author SHA1 Message Date
Raja R Harinath
3558437281 Define to G[U]INT64_TO_{LE,BE}, not G[U]INT32_TO_{LE,BE}.
* glib.h (G[U]INT64_FROM_{LE,BE}):
Define to G[U]INT64_TO_{LE,BE}, not G[U]INT32_TO_{LE,BE}.

Wonder why it wasn't caught before.
1998-12-30 22:53:37 +00:00
Tim Janik
097c9b1798 there was a reference count race for hooks during invocation loops. since
Mon Dec 21 21:48:29 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        * gmain.c: there was a reference count race for hooks during invocation
        loops. since all (known) hook loop implementations, do currently start
        out with g_hook_first_valid() and iterate with g_hook_next_valid(),
        g_hook_first_valid() will now return a referenced hook, and
        g_hook_next_valid() will "eat" that, and eventually transfer it to
        the next hook. <sigh> unfortunately this requires g_hook_next_valid()
        to take the hook_list as additional argument.

        * gmain.c (g_main_iterate): adjusted callers of g_hook_next_valid().
1998-12-21 21:43:00 +00:00
Owen Taylor
7f237f6fcd Add #defines defining scale of priorities.
Sat Dec 19 16:56:02 1998  Owen Taylor  <otaylor@redhat.com>

	* glib.h gmain.c (G_PRIORITY_LOW): Add #defines defining
	scale of priorities.
1998-12-19 22:21:39 +00:00
Tim Janik
e0153773a6 fixed up sys/poll.h and sys/types.h inclusions.
Sat Dec 19 04:27:17 1998  Tim Janik  <timj@gtk.org>

        * fixed up sys/poll.h and sys/types.h inclusions.
1998-12-19 03:44:30 +00:00
Tim Janik
c0c488e4ba fixed up gthread includes, cleaned up glibconfig.h a little bit.
Sat Dec 19 03:10:50 1998  Tim Janik  <timj@gtk.org>

        * fixed up gthread includes, cleaned up glibconfig.h a little bit.
1998-12-19 02:13:34 +00:00
Tim Janik
8be41eae4d new function to check whether a main loop has been quitted. (g_main_new):
Fri Dec 18 00:03:17 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        * gmain.c:
        (g_main_is_running): new function to check whether a main loop has been
        quitted.
        (g_main_new): added a gboolean argument to determine whether the loop
        should be considered initially running or not. however, g_main_run ()
        will still reset the main loops running state to TRUE upon initial
        entrance.

        * gmain.c:
        (g_main_iterate): documented this function's purpose in 5 steps.
        for step 2), flag sources as G_SOURCE_READY even if !dispatch and
        check G_SOURCE_READY prior to (*prepare), so we don't call (*prepare)
        on them multiple times.

Thu Dec 17 23:43:47 1998  Tim Janik  <timj@gtk.org>

        * gmain.c (g_main_add_poll): reordered arguments, so GPollFD* comes
        first, <sigh> (sorry Snorfle, i should have let you know in the first
        place).
        (g_main_dispatch): stack G_HOOK_FLAG_IN_CALL flags. call source's
        destructor when destroying a source.
1998-12-18 02:23:33 +00:00
CST 1998 Shawn T. Amundson
77ccad4d2f giounix.c: s/g_main_poll_add/g_main_remove_add/g
Wed Dec 16 22:32:13 CST 1998 Shawn T. Amundson <amundson@gtk.org>

        * glib.h:
          giounix.c: s/g_main_poll_add/g_main_remove_add/g
                     s/g_main_poll_remove/g_main_remove_poll/g
                     s/g_main_poll_add_unlocking/g_main_add_unlocking_poll/g
          (from Tim Janik)

        * gthread-posix.c: use g_free in mutex_free (from Tim Janik)
1998-12-17 04:36:04 +00:00
Tim Janik
a62ebb0e75 if !G_THREADS_ENABLED, eat the trailing semicolon with a bogus function
Thu Dec 17 04:10:49 1998  Tim Janik  <timj@gtk.org>

        * glib.h (G_LOCK_DECLARE_*): if !G_THREADS_ENABLED, eat the
        trailing semicolon with a bogus function declaration, instead
        of with a bogus variable declarations, so we avoid unused
        variable warnings.
1998-12-17 04:06:27 +00:00
Joel Becker
053793d72a changed func_data to user_data for g_scanner_scope_symbol_foreach() 1998-12-16 14:41:18 +00:00
Tim Janik
b2e318ff3e version bump to 1.1.8, binary age 0, interface age 0.
Wed Dec 16 03:16:58 1998  Tim Janik  <timj@gtk.org>

        * configure.in: version bump to 1.1.8, binary age 0, interface age 0.

        * glib.h: changed g_lock() to G_LOCK(), g_unlock() to G_UNLOCK() and
        g_trylock() to G_TRYLOCK(), since these are macros that expand to
        nothing with --disable-threads.
        changed G_LOCK_DEFINE() to G_LOCK_DECLARE() and introduced
        G_LOCK_DECLARE_STATIC() to achive the results of static G_LOCK_DECLARE().
        changed semantics of g_thread_supported to g_thread_supported() so it
        can be used as a function like g_module_supported(). the actuall
        definition is still a macro that expands into a variable for
        performance reasons though.
        various indentation and coding style cleanups.

        * configure.in: added --enable-threads that defaults to yes.

        * gmutex.c: changed tests g_thread_supported to g_thread_supported (),
        changed variable settings of g_thread_supported
        to g_threads_got_initialized.

        garray.c:
        gcache.c:
        gdataset.c:
        gdate.c:
        ghash.c:
        glist.c:
        gmain.c:
        gnode.c:
        gslist.c:
        gstring.c:
        gtree.c:
        gutils.c:
        changed s/g_lock/G_LOCK/, s/g_unlock/G_UNLOCK/,
        s/static G_LOCK_DEFINE/G_LOCK_DECLARE_STATIC/.
1998-12-16 05:38:35 +00:00
Owen Taylor
05d49ddbd3 Use an "inheritance" scheme for IO channel memory allocation.h
Tue Dec 15 17:17:46 1998  Owen Taylor  <otaylor@redhat.com>

	* glib.h giounix.c giochannel.c: Use an "inheritance"
	scheme for IO channel memory allocation.h
1998-12-15 22:30:15 +00:00
Sebastian Wilhelmi
d98c425676 Dont complain, if --without-threads or --with-threads=none is supplied;
1998-12-15  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>

	* configure.in: Dont complain, if --without-threads or
	--with-threads=none is supplied; Test for pthread_attr_init
	instead of pthread_cond_init, if threads seems to be supported by
	standard glib. (CFLAGS): Use G_THREAD_CFLAGS for compiling of glib
	as well.

	* glib.h, gmutex.c: Changed private to private_key to avoid
	problems when compiling with under C++.
1998-12-15 17:50:47 +00:00
Owen Taylor
931ea95265 This commit merges the glib-threads branch into the main
branch. See the ChangeLog for details of the changes.

In brief overview:

 - The set of threading functions can be set
 - A default implementation is provided in -lgthread
 - All static data structures are locked using these
   functions if g_thread_init() is called.
1998-12-15 05:28:02 +00:00
Havoc Pennington
dca6fcb59c Rely on GDate::dmy and GDate::Julian flags, rather than re-checking the
1998-12-02  Havoc Pennington  <hp@pobox.com>

* gdate.c (g_date_valid): Rely on GDate::dmy and GDate::Julian
flags, rather than re-checking the validity of the actual
values. This should be the correct behavior, the old way was
leftover cruft.

* glib.h, gdate.c: Changed MDY to DMY throughout.
1998-12-02 18:47:10 +00:00
Owen Taylor
beab982e3b Merge main loop into head. This probably breaks Win32, until
someone does the necessary updates.

Sat Nov 28 12:53:47 1998  Owen Taylor  <otaylor@redhat.com>

	* Makefile.am configure.in acconfig.h giochannel.c
	  glib.h glist.c gmain.c gutils.c:

        - Revised GIOChannel to provide a generic virtual-function
  	  based interface.
	- Added unix fd-based GIOChannel's
	- Added generic main-loop abstraction
	- Added timeouts and idle functions using main-loop abstraction.
1998-12-02 14:55:27 +00:00
Sebastian Wilhelmi
c8477277fe changed `gpointer struct_tm_p' parameter of g_date_to_struct_tm back to
1998-12-02  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>

	* glib.h:
	* gdate.c: changed `gpointer struct_tm_p' parameter of
	g_date_to_struct_tm back to `struct tm *tm' and forward declared
	`struct tm' in glib.h; yes, this is nice, we still need not
	include time.h.
1998-12-02 09:07:18 +00:00
Tim Janik
2886be294a s/time_t/GTime/ and s/g_print/g_message/ include time.h.
Wed Dec  2 02:10:59 1998  Tim Janik  <timj@gtk.org>

        * gdate.c: s/time_t/GTime/ and s/g_print/g_message/
        include time.h.

        * glib.h: removed #include <time.h>, changed time_t paramter of
        g_date_set_time() to time_t, changed struct tm parameter of
        g_date_to_struct_tm to `gpointer struct_tm_p'. yes, this is not
        nice, but including time.h actually breaks a bunch of code.
1998-12-02 02:24:14 +00:00
Havoc Pennington
a3e59c3ebf There are outstanding issues, but they should be resolvable in-place. If
this breaks something let me know and I will fix it.

1998-11-30  Havoc Pennington  <hp@pobox.com>

* gdate.c: New file, implements calendrical calculations.

* glib.h: Added declarations for GDate module.
1998-12-01 20:24:32 +00:00
Tim Janik
958f33656a added g_hook_list_marshal_check() to eventually destroy hooks after they
Mon Nov 30 07:12:10 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        * ghook.c: added g_hook_list_marshal_check() to eventually destroy
        hooks after they got marshalled.
1998-11-30 07:08:54 +00:00
Tim Janik
3a14f25fdf reverted the g_hash_table_set_key_freefunc() addition, since it's to
Thu Nov 26 01:36:20 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        * ghash.c: reverted the g_hash_table_set_key_freefunc() addition,
        since it's to specialized and needs to be resolved in a generic
        fashion.
1998-11-26 00:42:14 +00:00
PST 1998 Manish Singh
61bdacfb59 applied glib-tml-981120-0, change log appended below.
Tue Nov 24 18:57:59 PST 1998 Manish Singh <yosh@gimp.org>

        * applied glib-tml-981120-0, change log appended below.

        * glibconfig.h.win32: passthrough 64-bit constants unchanged, VC++
        infers them

Fri Nov 20 22:26:43 1998  Tor Lillqvist  <tml@iki.fi>

        * glib.h: Moved MSC pragmas from glib.h to glibconfig.h.win32.
        peer_offset field in WIN32 part of GIOChannel removed, need_wakeups
        added. Added "extern" to __declspec(dllimport).

        * gutils.c: Initialise need_wakeups.

        * glibconfig.h.win32: Pragmas moved here. Define G_GINT64_CONSTANT.

        * gmodule/gmodule.def: Added g_module_build_path.

        * gscanner.c: (g_scanner_cur_value) Move initailisation of v
        to before its use.

        * glib.def: Added g_(s)list_sort.

        * makefile.msc: A few more comments.

-Yosh
1998-11-25 03:02:56 +00:00
EST 1998 Michael K. Johnson
3568d22b53 added GFreeFunc and g_hash_table_set_key_freefunc() prototype. added
Tue Nov 24 14:05:47 EST 1998	Michael K. Johnson <johnsonm@redhat.com>

	* glib.h: added GFreeFunc and g_hash_table_set_key_freefunc()
	prototype.
	* ghash.c: added g_hash_table_set_key_freefunc() implementation.
	Modified the prototypes of the functions g_hash_node_destroy() and
	g_hash_nodes_destroy(), and changed the functions that call them
	to match the new definitions.
	This changes no external interfaces, and should create no binary
	or source incompatibilities.  It does add a member to the
	GHashTable structure.
1998-11-24 19:38:17 +00:00
Tim Janik
9c1692c260 removed the GListAllocator type and its g_*_allocator_*() function
Tue Nov 24 09:40:00 1998  Tim Janik  <timj@gtk.org>

        * glib.h: removed the GListAllocator type and its g_*_allocator_*()
        function variants (which weren't working anyways) in favour of a
        generic GAllocator type. new functions:
        g_allocator_new, g_allocator_free, g_slist_push_allocator,
        g_slist_pop_allocator, g_list_push_allocator, g_list_pop_allocator,
        g_node_push_allocator and g_node_pop_allocator.

        * gstring.c: removed bogus slist allocator code.
        * gtree.c: maintain own list of free tree nodes and don't waste
        GSLists for that, removed bogus slist allocator code.
        * glist.c: use GAllocators for node allocation.
        * gslist.c: use GAllocators for node allocation.
        * gnode.c: use GAllocators for node allocation.

        * gdataset.c: cleanups wrt automatic initialization.
1998-11-24 12:18:22 +00:00
Owen Taylor
eabb208b30 added g_array_insert_vals() to insert elements at an arbitrary index, and
Mon Nov 23 10:03:58 1998  Owen Taylor  <otaylor@gtk.org>

	* glib.h garray.[ch]: added g_array_insert_vals() to
	insert elements at an arbitrary index, and
	g_array_insert_val() macro.
1998-11-23 15:02:44 +00:00
Tim Janik
70a6dbff87 new function g_slist_copy() to duplicate a list with all its data
Sun Nov 22 17:07:03 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        * gslist.c: new function g_slist_copy() to duplicate a list with all its
        data pointers.
        * glist.c: new function g_list_copy.
1998-11-23 01:52:07 +00:00
Tim Janik
6515316f82 added empty default imlementation so gmodule.so compiles on systems that
Fri Nov 20 14:43:44 1998  Tim Janik  <timj@gtk.org>

        * gmodule.c (_g_module_build_path): added empty default imlementation
        so gmodule.so compiles on systems that are not yet supported, fix from
        Erik Bagfors <bagfors@hpc2n.umu.se>.
1998-11-20 13:49:35 +00:00
Tim Janik
5b0bbc2924 fixed off-by-one error, so we don't waste a loop iteration if (-1) was
Mon Nov 16 07:48:06 1998  Tim Janik  <timj@gtk.org>

        * glib.h (g_bit_nth_msf): fixed off-by-one error, so we don't waste
        a loop iteration if (-1) was passed, reported by Andreas Bombe
        <andreas.bombe@munich.netsurf.de>.
1998-11-16 07:45:10 +00:00
Owen Taylor
be7ab912ee Added g_list_sort() and g_slist_sort() to merge sort GLists and GSLists.
Fri Nov 13 15:17:34 1998  Owen Taylor  <otaylor@redhat.com>

	* glist.c gslist.c glib.h: Added g_list_sort() and
	g_slist_sort() to merge sort GLists and GSLists.
	Submitted by Sven Over <sven.over@ob.kamp.net>
	over a year ago!

	* testglib.c: Test the new sort functions.
1998-11-13 20:50:41 +00:00
Manish Singh
11376df686 use __extension__ for long long on gcc >= 2.8 and egcs, and provide a
* configure.in: use __extension__ for long long on gcc >= 2.8 and
egcs, and provide a G_GINT64_CONSTANT wrapper so -ansi -pedantic
compiles clean.

* glib.h: make the endian x86 asm __const__ so the compiler can do
better optimizations. Also remove the cc clobber, these shouldn't
be changing condition codes. Ditch some redundant casts. Add an
optimization for 64-bit endian conversions in x86. Use constant
wrapper for the generic method.

* testglib.c: use constant wrappers for 64-bit constants

-Yosh
1998-11-11 01:26:10 +00:00
Phil Schwan
59f6876ded Added 'strncasecmp' to the list of functions to be searched for. Added a
1998-11-04  Phil Schwan  <pschwan@cmu.edu>

        * configure.in: Added 'strncasecmp' to the list of functions to be
        searched for.
        * glib.h: Added a prototype for 'g_strncasecmp'
        * strfuncs.c: (g_strncasecmp) new function modeled closely after
        'g_strcasecmp'
1998-11-05 01:36:36 +00:00
Sebastian Wilhelmi
4dbf739ea9 new function for removing an entry from an array while preserving the
1998-11-03  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>

	* glib.h:
	* garray.h:
	(g_array_remove_index): new function for removing an entry from an
	array while preserving the order
	(g_array_remove_index_fast): new function for removing an entry
	from an array. the order might be distorted
	(g_ptr_array_remove_index_fast, g_ptr_array_remove_fast): new
	functions; working similiar to the above. (they have the semantic
	of the old g_ptr_array_remove[_index] functions)
	(g_ptr_array_remove_index, g_ptr_array_remove): new semantic. now
	the order of the elements in the array is not changed
	(g_byte_array_remove_index, g_byte_array_remove_index_fast): new
	functions; byte_array wrapper for g_array_remove_index[_fast]
1998-11-03 14:52:25 +00:00
Manish Singh
840114ac76 glib.h endian macros defined using the glibconfig.h mechanism now
* glib.h
* configure.in: endian macros defined using the glibconfig.h mechanism now

* ghook.c: casts for GHookFunc and GHookCheckFunc to avoid warnings

-Yosh
1998-11-02 07:04:38 +00:00
Manish Singh
7e04691726 applied glib-tml-981101-1 patch from Tor Lillqvist (ChangeLog entry
* applied glib-tml-981101-1 patch from Tor Lillqvist (ChangeLog
entry appended below)

* testglib.c
* gstrfuncs.c
* glib.h: use G_HAVE_GINT64, since HAVE_GINT64 is gone

* gmessages.c
* gscanner.c: #include <config.h> in here too, for HAVE_UNISTD_H

-Yosh
1998-11-01 04:19:54 +00:00
Raja R Harinath
5900267cc7 Land glib-rrh-19981025-0.patch.
* Makefile.am (glibconfig.h): New rule.
(stamp-gc-h): New rule.  Generate `glibconfig.h'.
* configure.in (AM_CONFIG_HEADER): It is now `config.h'.
(HAVE_BROKEN_WCTYPE): On Solaris, look for iswalnum in -lw before
concluding "broken wctype".
(glibconfig.h): Use AC_OUTPUT_COMMANDS to put generation code into
config.status.
* glib.h: Remove a lot of tests and defines.  All these have been
moved to `configure.in (glibconfig.h)'.
* gerror.c: Include <config.h>.
* gmem.c: Likewise.
* gstrfuncs.c: Likewise.
* gutils.c: Likewise.

This could cause some short term instability.
1998-11-01 01:32:59 +00:00
Tim Janik
e8a920f88d removed old G_ENUM(), G_FLAGS(), G_NV() and G_SV() macros. added macros
Sat Oct 31 05:08:26 1998  Tim Janik  <timj@gtk.org>

        * glib.h: removed old G_ENUM(), G_FLAGS(), G_NV() and G_SV() macros.
        added macros G_STRUCT_OFFSET(), G_STRUCT_MEMBER_P() and
        G_STRUCT_MEMBER() for handling structure fields through their offsets.
        (struct _GHookList): added a hook_free function member, that can be used
        to free additional fields in derived hook structures.
        g_hook_free(): if hook_list->hook_free != NULL, call this function prior
        to freeing the hook. (this functionality should have been there in the
        first place, it just got forgotten as an implementation detail).
1998-10-31 18:57:36 +00:00
Manish Singh
a32e40e2c4 G_BREAKPOINT for alpha from Robert Wilhelm <robert@physiol.med.tu-muenchen.de>
-Yosh
1998-10-28 08:51:18 +00:00
Tim Janik
7428120d37 new function for file input. rewind the filedescriptor to the current
Tue Oct 27 07:25:53 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        * gscanner.c:
        (g_scanner_sync_file_offset): new function for file input.
        rewind the filedescriptor to the current buffer position and blow
        the file read ahead buffer. usefull for third party uses of our
        filedescriptor, which hooks onto the current scanning position.
        (this became neccessary with the implementation of buffered
        reads).
        (g_scanner_input_file):
        (g_scanner_input_text): automatically blow the read ahead buffer.
        (g_scanner_get_char): blow the read ahead buffer when the end of
        input is reached, i.e. a '\000' char is read.
1998-10-28 01:32:54 +00:00
Manish Singh
167b4fbbfc get rid of duplicate #g_htonl and friends in the NATIVE_WIN32 part
-Yosh
1998-10-27 08:33:27 +00:00
Manish Singh
215251e99d reimplemented the endian stuff, using inline asm for x86. #define g_htonl
* glib.h: reimplemented the endian stuff, using inline asm for x86.
#define g_htonl and friends.

* testglib.c: new tests for the endian stuff

* configure.in: care for AIX in gmodule linker flags test (from Joel Becker
<jlbec@raleigh.ibm.com>). Check $host_os for linux instead of existance of
/usr/include/linux

* gutils.c: buh-bye evil warning. Thou hast been #ifdef'd out of thine
existance!

-Yosh
1998-10-27 06:19:42 +00:00
Tor Lillqvist
a6149403de removed dummy structure definitions for struct _GCache, _GTree, _GTimer,
Tue Oct 27 03:00:50 1998  Tim Janik  <timj@gtk.org>

        * glib.h: removed dummy structure definitions for struct _GCache,
        _GTree, _GTimer, _GMemChunk, _GListAllocator and _GStringChunk.

        * gutils.c: implement glib's inline functions _after_ all include
        statements have been processed.
        removed Tor's MAXPATHLEN check since there already was one supplied
        further down in this file.
        (LibMain): special cased the #ifdef __LCC__ case for NATIVE_WIN32,
        since lcc maybe used on other platforms as well. why in hell is this
        stuff required?
        (g_get_any_init): for windows, if the user name is supplied, use it as
        realname also.
        in general, if there is no homedir specified, use the tmpdir that
        we already figured.

        * gtimer.c (g_timer_elapsed): changed a g_assert() statement to
        g_return_if_fail().

        * applied glib-tml-981020-0.patch for WIN32 portability, added some
        comments and g_return_if_fail() statements, minor indentation fixes.
        ChangeLog entry from Tor Lillqvist is appended.

        * glib.h (struct dirent): use lower case structure members.

        * glib.h:
        * makefile.lcc:
        * makefile.msc:
        s/COMPILING_GLIB/GLIB_COMPILATION/

1998-10-20: Tor Lillqvist <tml@iki.fi>

        * README.win32 glib.def gmodule.def
        * glibconfig.h.win32 gmodule/gmoduleconf.h.win32:
        New files for the Windows port. The .def files list exported
        symbols for the Microsoft linker and compatibles.

        * configure.in:
        Added checks for some platform-dependent headers: pwd.h sys/param.h
        sys/select.h sys/time.h sys/times.h unistd.h, and the function lstat.

        * gerror.c:
        Conditionalized inclusion of system-dependent headers. Changes
        for Windows: no gdb to do a stack trace. Just call abort().

        * glib.h:
        Changes for Windows:

        Added macros G_DIR_SEPARATOR, G_DIR_SEPARATOR_S for
        platform-dependent file name syntax elements. Added macros
        G_SEARCHPATH_SEPARATOR, G_SEARCHPATH_SEPARATOR_S for
        platform-dependent search path syntax conventions.

        Added pragmas for Microsoft C to make it more pedantic.

        Marked GLib's global variables for export from DLL.

        Added the function g_strescape that escapes backslashes.

        Added functions g_path_is_absolute and g_path_skip_root to
        handle platform-dependent file name syntax.

        Added the function g_getenv that expands environment variables
        that contain references to other environment variables, as is
        typical on Windows NT.

        Added the GIOChannel structure which is used to encapsulate the
        IPC mechanism used by the GIMP's plug-ins, and possibly other
        things later. On Unix a GIOChannel encapsulates just a file
        descriptor. On Windows it contains a file handle from _pipe() and a
        few other things related to the implementation of gdk_input_add
        and GIMP plug-in communication. Subject to change.

        Removed duplicate declarations of the version variables.

        For the Microsoft compiler, declare own implementation of
        ftruncate and the <dirent.h> functions.

        * gmem.c:
        Define a symbolic name  for the profiling table size.

        * gmessages.c:
        Conditionalized inclusion of unistd.h. On Windows, output using
        stdio to stdout.

        * gscanner.c:
        Conditionalized inclusion of unistd.h. Added changes for
        Microsoft C. Added CR to the skipped character set. Added small
        workaround for MSC compiler bug in g_scanner_cur_value.

        * gstrfuncs.c:
        Added the function g_strescape, which escapes the backslash
        character. Needed especially when printing Windows filenames.

        * gtimer.c:
        Conditionalized inclusion of unistd.h and sys/time.h. Added
        implementations for Windows.

        * gutils.c:
        Conditionalized inclusion of platform-dependent headers. Use
        the platform-independent file name syntax macros.
        Conditionalize code on platform-dependent features. Added the
        functions g_path_is_absolute g_path_skip_root and g_getenv.
        Added the GIOChannel-related functions. Added
        compiler-dependent Unix compatibility functions for Windows.

        * makefile.lcc makefile.msc:
        New files. Compiler-specific makefiles for LCC-Win32 and
        Microsoft C. Only Microsoft C is actually supported currently.

        * testglib.c:
        Added pathname check cases for Windows. Added workaround for
        bug in the Microsoft runtime library. Improved some tests a bit.

Tue Oct 27 04:00:11 1998  Tim Janik  <timj@gtk.org>

        * testgmodule.c (main): changed the #ifdef WIN32 test to NATIVE_WIN32,
        this needs to be more constistent throughout the code, do we go for
        NATIVE_WIN32 or WIN32?

        * gmodule.c (LibMain): special cased the #ifdef __LCC__ case for
        NATIVE_WIN32, since lcc maybe used on other platforms as well.
        * libgplugin_a.c (LibMain):
        * libgplugin_b.c (LibMain):
        likewise. not sure i like this special requirement for lcc in here.

        * gmodule-dl.c (_g_module_build_path):
        feature empty "" directories and prepend the module name with "lib".

        * gmodule-dld.c (_g_module_build_path):
        * gmodule-win32.c (_g_module_build_path):
        feature empty "" directories.

        * we need some more magic in the _g_module_build_path variants
        so we don't append/prepend lib and .so, .sl or .dll for those names
        that already contain it.

        * applied patch from Tor Lillqvist for g_module_build_path() and
        windows support.

1998-10-20: Tor Lillqvist <tml@iki.fi>

        * gmodule/gmodule-win32.c:
        New file.

        * gmodule/gmodule.c gmodule/gmodule.h:
        Added the funcion g_module_build_path that builds the path to
        a module file, decorating the name according to the system's
        conventions.  Added the Windows implementation.

        * gmodule/libgplugin_a.c gmodule/libgplugin_b.c:
        Added LibMain for LCC-Win32.

        * gmodule/testgmodule.c:
        Handle Windows dll names.
1998-10-27 04:11:34 +00:00
Tim Janik
e86746f168 no more characters are available if read() returns anything less than 1,
Sun Oct 25 07:30:10 1998  Tim Janik  <timj@gtk.org>

        * gscanner.c:
        (g_scanner_peek_next_char):
        (g_scanner_get_char): no more characters are available if read() returns
        anything less than 1, not only on 0 return.

        * glib.h:
        * gstrfuncs.c: final API cleanup of string arrays to suit sopwith's
        argument order requirements.
        (g_strsplit): renamed from g_str_array_split().
        (g_strjoinv): renamed from g_str_array_joinv(), string array is
        now passed as last parameter. removed `const' qualifier from string
        array pointer (again).
        (g_strjoin): new function from sopwith to concatenate strings with
        an additional seperator.
        (g_strfreev): renamed from g_str_array_free.
1998-10-25 06:44:49 +00:00
Elliot Lee
daf46f9550 Fix new strfuncs back up (again) - No, incrementing pointers in a loop is
Fix new strfuncs back up (again)
	- No, incrementing pointers in a loop is not any faster than
	  indexing an array in a loop with a good compiler, but it is
	  harder to read.
	- strconcat doesn't allow a separator - added g_str_array_join,
	  renamed g_str_array_join to g_str_array_joinv
	- join routines take separator as first argument, as is customary.
1998-10-21 20:14:16 +00:00
Tim Janik
2009313501 API cleanups of the new g_str* functions for consistency with the existing
Wed Oct 21 17:03:05 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        * gstrfuncs.c: API cleanups of the new g_str* functions for consistency
        with the existing naming scheme for g_str* functions. grouped the g_str*
        functions that will return a newly allocated string seperatedly. all of
        the in_place arguments were skipped, the caller is supposed to pass a
        g_strdup()ed string if he wants to retrive a new copy. indentation and
        coding style fixups. added some g_return_if_fail() statements.
        string array functions are prefixed with g_str_array_.
        (g_strdelimit): return the modified string like all other g_str*
        functions, that operate in place.
        (g_strchug): renamed from g_str_chug(), removed in_place argument.
        (g_strchomp): renamed from g_str_chomp(), removed in_place argument.
        (g_strstrip): renamed from g_str_strip(), removed in_place argument.
        (g_str_array_join): renamed from g_strconcatv(), since it actually
        operates on a string array and has totaly different semantics from
        g_strconcat(). check for separator != NULL, don't segfault if the first
        string is NULL. removed the `const' from the string array that's passed,
        so users can operate on gchar** string arrays.
        (g_str_array_split): renamed from g_str_split() because we actually
        produce a string array. reimplemented this function for efficiency.
        removed macro aliases g_str_joinv and g_str_join.
1998-10-21 17:18:22 +00:00
Elliot Lee
88a22179ac I swear I'll get it right someday.
I swear I'll get it right someday.
1998-10-20 22:28:17 +00:00
Elliot Lee
46ec86252b s/str_concatv/strconcatv/
s/str_concatv/strconcatv/
1998-10-20 22:23:38 +00:00
Elliot Lee
039de051ef Move string join/split/free routines from libgnome/gnome-string, rename,
* glib.h, gstrfuncs.c: Move string join/split/free routines from
 	libgnome/gnome-string, rename, and add g_str_chug.
1998-10-20 21:41:55 +00:00
Manish Singh
1a3648688f configure.in added test for endianness
* configure.in
* acconfig.h: added test for endianness

* glib.h: #define endian macros for system and some conversions
between byte order

-Yosh
1998-10-20 10:43:39 +00:00
Tim Janik
bee522aa57 removed functions g_dataset_id_set_destroy and g_datalist_id_set_destroy
Thu Oct  8 06:47:27 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        * gdataset.c: removed functions g_dataset_id_set_destroy and
        g_datalist_id_set_destroy and macros g_dataset_set_destroy and
        g_datalist_set_destroy.
        added new functions g_dataset_id_remove_no_notify and
        g_datalist_id_remove_no_notify plus associated macros
        g_dataset_remove_no_notify and g_datalist_remove_no_notify, which
        will remove a certain data portion without invokation of its destroy
        notifier, this should only be used in very controled circumstances.
1998-10-08 06:32:49 +00:00
Tim Janik
43cc1dbf96 removed the #pragma } statement after extern "C" {. use (c-set-offset
Wed Oct  7 05:31:24 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        removed the #pragma } statement after extern "C" {. use
        (c-set-offset 'inextern-lang 0) to fixup emacs cc-mode indentation.

        * glib.h:
        * ghook.c: API and code cleanups. changed the G_HOOK_ACTIVE and
        G_HOOK_IN_CALL enum vals to G_HOOK_FLAG_ACTIVE and G_HOOK_FLAG_IN_CALL.
        changed the G_HOOK_IS_ACTIVE() and G_HOOK_IS_IN_CALL() macros to
        G_HOOK_ACTIVE() and G_HOOK_IN_CALL().
        fixed the g_hook_find* functions, so they iterate over non-active
        hooks as well.
        (g_hook_first_valid):
        (g_hook_next_valid): added an extra argument gboolean may_be_in_call,
        which indicates whether G_HOOK_IN_CALL() hooks are considered valid
        or not. these two functions are meant as iterators for the hook list
        invocation, so they need to a) provide functionality to implement
        may_recurse bahaviour and b) only walk active hooks.
1998-10-07 04:19:14 +00:00
Tim Janik
ba5aabfa36 properly handle the first valid hook to call, it maybe IN_CALL already.
Sat Oct  3 01:18:10 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        * ghook.c:
        (g_hook_list_invoke):
        (g_hook_list_invoke):
        (g_hook_list_marshal): properly handle the first valid hook to call,
        it maybe IN_CALL already.
        (g_hook_list_marshal): minor name change.

Fri Oct  2 23:21:21 1998  Tim Janik  <timj@gtk.org>

        * glib.h:
        * ghook.c: renamed GHook.id to GHook.hook_id so we don't get troubles
        with ObjC which reserves "id" as a keyword (Raja R Harinath
        <harinath@cs.umn.edu>).
1998-10-02 23:21:58 +00:00