Add g_list_store_insert_sorted() which takes a GCompareDataFunc to
decide where to insert. This ends up being a very trivial function,
thanks to GSequence.
https://bugzilla.gnome.org/show_bug.cgi?id=743927
Make sure that we only match the _get_type() function name by
restricting the regexp to matching [A-Za-z0-9_]. We were matching on .*
before which means that if we had two _get_type() functions appearing on
a single line then we would get everything in between them included (by
the default rule of '*' being greedy).
This affected G_DECLARE_*_TYPE which puts several uses of _get_type()
into a single line.
GListModel is an interface that represents a dynamic list of GObjects.
Also add GListStore, a simple implementation of GListModel that stores
all objects in memory, using a GSequence.
https://bugzilla.gnome.org/show_bug.cgi?id=729351
Currently the only way to set a state hint on an action is through a
subclass; add a g_simple_action_set_state_hint() method so that this
becomes easier for clients that already use GSimpleAction.
https://bugzilla.gnome.org/show_bug.cgi?id=743521
When implementing blocking operations on top of
nonblocking sockets we should always first try to
perform the operation and then if needed handle
EAGAIN and wait with g_socket_wait_condition.
This is an optimization since we avoid calling
wait condition when it is not needed, but most
importantly this fixes hangs on win32 where some
events (in particular FD_WRITE) are only emitted
after the operation fails with EWOULDBLOCK.
https://bugzilla.gnome.org/show_bug.cgi?id=732439https://bugzilla.gnome.org/show_bug.cgi?id=741707
Add a unit test that checks g_socket_new_from_fd by creating
a gsocket, obtaining its fd, duplicating the fd and then creating
a gsocket from the new fd. This shows a hang on win32 since the
gsocket created from the fd never receives the FD_WRITE event
because we wait for the condition without first trying to write
and windows signals the condition only after a EWOULDBLOCK error.
https://bugzilla.gnome.org/show_bug.cgi?id=741707
We were asking for properties on NM's dbus interface, but if NM is not
running then there won't be any. Check if the name has an owner before
doing anything to it.
https://bugzilla.gnome.org/show_bug.cgi?id=741653
In g_file_make_directory_with_parents(), the my_error variable is used
for several different purposes throughout the whole function, not all of
which are obvious. This explains the situation with some comments.
https://bugzilla.gnome.org/show_bug.cgi?id=719455
Allows sending of multiple messages (packets, datagrams)
in one go using sendmmsg(), thus drastically reducing the
number of syscalls when sending out a lot of data, or when
sending out the same data to multiple recipients.
https://bugzilla.gnome.org/show_bug.cgi?id=719646
Fix two problems:
1) If g_socket_service_stop is called before the accept call is requeued,
then the reference count won't decrease and this code will hang forever:
while (G_OBJECT (service)->ref_count == ref_count)
g_main_context_iteration (NULL, TRUE);
2) Sometimes the testcase fails (maybe 1 in 200 times for me):
GLib-GIO:ERROR:socket-listener.c:73:connection_cb: assertion failed
(G_OBJECT (service)->ref_count == 2): (3 == 2)
Aborted (core dumped)
The problem is that depending on ordering, cancellation of the async
listener can require further main context iterations before it releases
the reference on the socket service. Furthermore, in some cases, it
requires at least one iteration.
https://bugzilla.gnome.org/show_bug.cgi?id=712570
Add a property to GNetworkMonitor indicating the level of network
connectivity: none/local, limited, stuck behind a portal, or full.
The default implementation just returns none or full depending on the
value of is-available.
https://bugzilla.gnome.org/show_bug.cgi?id=664562
Add G_IO_ERROR_CONNECTION_CLOSED as an alias for
G_IO_ERROR_BROKEN_PIPE, and also return it on ECONNRESET.
It doesn't really make sense to try to distinguish EPIPE and
ECONNRESET at the GLib level, since the exact choice of which error
gets returned in what conditions depends on the OS. Given that, we
ought to map the two errors to the same value, and since we're already
mapping EPIPE to G_IO_ERROR_BROKEN_PIPE, we need to map ECONNRESET to
that too. But the existing name doesn't really make sense for sockets,
so we add a new name.
https://bugzilla.gnome.org/show_bug.cgi?id=728928
This is a convenience method for creating a GNetworkAddress which is
guaranteed to return IPv4 and IPv6 loopback addresses. The program
cannot guarantee that 'localhost' will resolve to both types of
address, so programs which wish to connect to a local service over
either IPv4 or IPv6 must currently manually create an IPv4 and another
IPv6 socket, and detect which of the two are working. This new API
allows the existing GSocketConnectable machinery to be used to
automate that.
Based on a patch from Philip Withnall.
https://bugzilla.gnome.org/show_bug.cgi?id=732317
g_settings_has_signal_handlers() checks whether any of the signals has
pending handlers. However, g_signal_has_handler_pending() matches on
exact detail, even when passing 0. Subscribing to one of GSettings'
signals with a detail will fail this check and never connect to the
backend.
Fix this by calling has_handler_pending() with the key as detail as
well.
https://bugzilla.gnome.org/show_bug.cgi?id=740848
Add a GSocketListener test program. Currently the only test is a
regression test for bug 712570 (based on a standalone bug reproducer
provided by Ross Lagerwall).
If all users of a GThreadedSocketService release their references to the
service while a connection thread is running, the thread function will
release the last reference to the service which causes the finalize to
deadlock waiting for all threads to finish (because it's called from the
thread function).
To fix this, don't wait for all threads to finish in the service's
finalize method. Since the threads hold a reference to the service,
finalize should only be called when all threads are finished running (or
have unrefed the service and are about to finish).
https://bugzilla.gnome.org/show_bug.cgi?id=712570
If SSL 3.0 has been disabled (at the host, application, or library
level), then the "use-ssl3" property becomes a "fail-immediately"
property.
Despite the name, the point of the property wasn't really specifically
to use SSL 3.0; it was to allow fallback when talking to broken
servers that do SSL/TLS negotiation incorrectly and break when they
see unexpectedly-high version numbers. So if we can't fall back to SSL
3.0, then the "use-ssl3" property should fall back to TLS 1.0 instead
(since there are hosts that will reject a TLS 1.2 handshake, but
accept a TLS 1.0 one).
glib-networking is being updated to implement that behavior, so update
the documentation here.
https://bugzilla.gnome.org/show_bug.cgi?id=738633
In commit 8ff5668, we are subscribing the GSettings backend later, but this
meant that we need to initialize cache_lock earlier, as we might try to
use that lock before a change notification is issued to subscribe the
backend, which would then cause an access violation if we are trying to
read GSettings values, as that lock is used to access the Windows Registry.
Initialize cache_lock once we initialize the GSettings Registry backend,
and delete it upon finalize, so that g_settings_read_from_backend() can
proceed normally, even if the GSettings backend is not yet subscribed.
https://bugzilla.gnome.org/show_bug.cgi?id=740413
GSettings objects begin watching for changes as soon as they are created
in order that they can emit the "changed" signal.
In the case of dconf, if we want to be able to emit the changed signal,
we need to go on the bus and add some match rules. This requires
creating the dconf helper thread and also requires initialising GDBus
(which creates another thread).
Some users of GSettings are never interested in the "changed" signal.
One of these users is the glib-networking code that gets run every time
a new network connection is created.
Some users are reporting that they are annoyed that simply establishing
a network connection would spawn two extra threads and create a D-Bus
connection.
In order to avoid doing unnecessary work for these simple uses, delay
the subscription until we know that we will actually need to do it.
We do this in a simple way, using a simple argument: in order for the
user to care that a value changed then they must have:
1) watched for a change signal; and then
2) actually read a value
If the user didn't actually read a value then they cannot possibly be
interested in if the value changed or not (since they never knew the old
value to begin with and therefore would be unable to observe that it
ever changed, since they have nothing to compare the new value with).
This really is a behaviour change, however, and it does impact at least
one user: the 'monitor' functionality of the GSettings commandline tool,
which is interested in reporting changes without ever having known the
original values. We add a workaround to the commandline tool in order
to ensure that it continues to function properly.
It's also possible to argue that it is completely valid to have read a
value and _then_ established a change signal connection under the
(correct) assumption that it would not have been possible to miss a
change signal by virtue of not having returned to the mainloop.
Although this argument is true, this pattern is extremely non-idiomatic,
and the problem is easily avoided by doing things in the usual order.
We never really talked about change notification in the overview
documentation for GSettings, so it seems like now is a good time to add
some discussion, including the new rules for when one can expect change
signals to be emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=733791
This should already work according to the documentation, but doesn't
because main_options is consumed before the check in
g_application_parse_command_line().
Fix by moving the check for main_options up.
https://bugzilla.gnome.org/show_bug.cgi?id=740157
The win32 headers do:
#define interface struct
which is just evil and breaks other code that assumes it can use
"interface" as a variable name. gnetworking.h was supposed to be doing
"#undef interface" after including the win headers, but it did it too
soon, resulting in it getting redefined by a later include. Fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=738551
g_tls_certificate_new_from_file() was only loading the complete chain
if it was fully valid, but we only meant to be validating that it
formed an actual chain (since the caller may be planning to ignore
other errors).
https://bugzilla.gnome.org/show_bug.cgi?id=729739
