Add SPDX license (but not copyright) headers to all files which follow a
certain pattern in their existing non-machine-readable header comment.
This commit was entirely generated using the command:
```
git ls-files gio/tests/*.c | xargs perl -0777 -pi -e 's/\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/\n \*\n \* SPDX-License-Identifier: LGPL-2.1-or-later\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/igs'
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
When checking that the connection has the expected number of refs, the
test would block on a `GMainContext` iteration for up to 3s before
waking up and failing (if the refcount was still not as expected).
This check was written in the expectation that changing the refcount of
the connection would only happen due to dispatching a source on
`GMainContext` — hence the `GMainContext` would wake up as the refcount
changed.
That’s probably not actually true though. It might be the case that the
connection’s refcount is changed on from the GDBus worker thread, which
would not cause any wakeups on the main thread’s `GMainContext`.
In this case, the `GMainContext` iteration in
`assert_connection_has_one_ref()` would block for the full 3s, and then
wake up and notice the refcount is correct (then the test would
proceed).
That’s fine, apart from the fact that `test_threaded_singleton()` does
this 1000 times. If the slow case is hit on a significant number of
those test runs, the test will take around 3000s to complete, which is
significantly more than meson’s test timeout of 360s. So the test fails
with something like:
```
220/266 glib:gio+slow / gdbus-threading TIMEOUT 360.07 s
--- command ---
G_TEST_SRCDIR='/builds/GNOME/glib/gio/tests' GIO_MODULE_DIR='' G_TEST_BUILDDIR='/builds/GNOME/glib/_build/gio/tests' /builds/GNOME/glib/_build/gio/tests/gdbus-threading
--- stdout ---
\# random seed: R02S83fe8de22db4d4f376e6d179e2bdd601
1..3
\# Start of gdbus tests
ok 1 /gdbus/delivery-in-thread
ok 2 /gdbus/method-calls-in-thread
\# GLib-GIO-DEBUG: refcount of 0x5602de913660 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
\# GLib-GIO-DEBUG: refcount of 0x5602de913660 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
\# GLib-GIO-DEBUG: refcount of 0x5602de913c60 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
\# GLib-GIO-DEBUG: refcount of 0x5602de913c60 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
\# GLib-GIO-DEBUG: refcount of 0x5602de913260 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
\# GLib-GIO-DEBUG: refcount of 0x5602de913260 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
```
From this log, it can be seen that the sleep is happening on a different
`GMainContext` every other time, so the test *is* making progress.
Assuming this is a correct diagnosis (it’s a lot of guessing), this
commit tries to fix the test by adding a wakeup timeout to the
`GMainContext` in `assert_connection_has_one_ref()`, which will wake it
up every 50ms to re-check the exit condition.
This polling approach has been taken because it doesn’t seem feasible to
make sure that every `g_object_ref()`/`g_object_unref()` call on a
`GDBusConnection` causes the main context to wake up.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It periodically hangs due to the `GDBusConnection` having more than 1
ref (and never losing them), so there’s potentially a leaking ref
somewhere:
```
(/builds/alexander.klauer/glib/_build/gio/tests/gdbus-threading:17767): GLib-GIO-DEBUG: 13:18:12.268: refcount of 0x55fe85b1a260 is not right, sleeping
\# GLib-GIO-DEBUG: refcount of 0x55fe85b1a260 is not right, sleeping
```
Add some more debug output to try and track the problem down.
See: https://gitlab.gnome.org/alexander.klauer/glib/-/jobs/1865968
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This was mostly machine generated with the following command:
```
codespell \
--builtin clear,rare,usage \
--skip './po/*' --skip './.git/*' --skip './NEWS*' \
--write-changes .
```
using the latest git version of `codespell` as per [these
instructions](https://github.com/codespell-project/codespell#user-content-updating).
Then I manually checked each change using `git add -p`, made a few
manual fixups and dropped a load of incorrect changes.
There are still some outdated or loaded terms used in GLib, mostly to do
with git branch terminology. They will need to be changed later as part
of a wider migration of git terminology.
If I’ve missed anything, please file an issue!
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When running under CI, each iteration takes so long that the total test
time is around 200s. If the CI runner is highly loaded, this can tip it
over the timeout of 360s.
Reduce the iteration counts unless running the test thoroughly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
Currently the test waits for 1s before deciding that a refcount has been
leaked. But slow test machines might take longer than that between
scheduling different threads to sort out the refcount, so increase the
timeout.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
When testing that signals are delivered to the correct thread, and are
delivered the correct number of times, call `EmitSignal()` on the
`gdbus-testserver` to trigger a signal emission, and listen for that.
Previously, the code listened for `NameOwnerChanged` and connected to
the bus again to trigger emission of that. The problem with that is that
other things happening on the bus (for example, an old
`gdbus-testserver` instance disconnecting) can cause `NameOwnerChanged`
signal emissions. Sometimes, the `gdbus-threading` test was failing the
`signal_count == 1` assertion due to receiving more than one
`NameOwnerChanged` emission.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This is equivalent, but makes the loop exit conditions a little clearer,
since they’re actually in a `while` statement, rather than being a
`g_main_loop_quit()` call in a callback somewhere else in the file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
As with the previous commit, don’t stop iterating the `context` in
`test_delivery_in_thread_func()` until the unsubscription from a signal
is complete, and hence there’s a guarantee that no callbacks are pending
in the `thread_context`.
This commit uses the `GDestroyNotify` for
`g_dbus_connection_signal_subscribe()` as a synchronisation message from
the D-Bus worker thread to the `test_delivery_in_thread_func()` thread
to notify of signal unsubscription.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Iterate the given `context` while waiting, rather than sleeping. This
ensures that if the errant `GDBusConnection` ref is held by some pending
callback in the given `context`, it will actually be released.
Typically `context` is going to be the global default main context.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This introduces no functional changes, but makes the code a little more
explicit about which connection and main context it’s operating on.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
These checks used to be a precondition on test_threaded_singleton(); but
the earlier tests could leave the refcount of the shared connection in a
bad state, and this wouldn’t be caught until later.
Factor out the check, increase the iteration count to 1000 (so the check
blocks for up to 1s rather than 100ms), and call it in more places.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
When compiling GLib with `-Wsign-conversion`, we get various warnings
about the atomic calls. A lot of these were fixed by
3ad375a629, but some remain. Fix them by
adding appropriate casts at the call sites.
Note that `g_atomic_int_{and,or,xor}()` actually all operate on `guint`s
rather than `gint`s (which is what the rest of the `g_atomic_int_*()`
functions operate on). I can’t find any written reasoning for this, but
assume that it’s because signedness is irrelevant when you’re using an
integer as a bit field. It’s unfortunate that they’re named a
`g_atomic_int_*()` rather than `g_atomic_uint_*()` functions.
Tested by compiling GLib as:
```
CFLAGS=-Wsign-conversion jhbuild make -ac |& grep atomic
```
I’m not going to add `-Wsign-conversion` to the set of default warnings
for building GLib, because it mostly produces false positives throughout
the rest of GLib.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1565
Previously, we waited up to 0.5s, but that can fail on slow
architectures like ARM; now we wait up to 60s in 0.1s increments.
Patch originally by Simon McVittie <simon.mcvittie@collabora.co.uk>,
modified by Iain Lane to be called earlier, to catch all testcases in a
particular test.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=724113
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Acked-by: Matthias Clasen <mclasen@redhat.com>
I searched all files that mention g_test_run, and replaced most
g_print() calls. This avoids interfering with TAP. Exceptions:
* gio/tests/network-monitor: a manual mode that is run by
"./network-monitor --watch" is unaffected
* glib/gtester.c: not a test
* glib/gtestutils.c: not a test
* glib/tests/logging.c: specifically exercising g_print()
* glib/tests/markup-parse.c: a manual mode that is run by
"./markup-parse --cdata-as-text" is unaffected
* glib/tests/testing.c: specifically exercising capture of stdout
in subprocesses
* glib/tests/utils.c: captures a subprocess's stdout
* glib/tests/testglib.c: exercises an assertion failure in g_print()
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Very many testcases, some GLib tools (resource compiler, etc) and
GApplication were calling g_type_init().
Remove those uses, as they are no longer required.
https://bugzilla.gnome.org/show_bug.cgi?id=686161
On slower platforms, the overhead of the 240 D-BUS Sleep calls is larger than
the current maximum of 6 seconds. A run on a Panda board sometimes fails with
ERROR:/build/buildd/glib2.0-2.33.8/./gio/tests/gdbus-threading.c:409:test_method_calls_on_proxy:
assertion failed (elapsed_msec < 6000): (7365 < 6000)
Bump maximum time to 8 seconds to be more resilient to this.
https://bugzilla.gnome.org/show_bug.cgi?id=682222
g_main_loop_quit() only quits mainloops that are currently running --
not ones that may run in the future. The way the gdbus-threading tests
are written can possibly result in a call to g_main_loop_quit() before
g_main_loop_run() has started.
The mainloops aren't actually used for anything other than signalling
the completion of the threads, so just use g_thread_join() for that.
https://bugzilla.gnome.org/show_bug.cgi?id=666129
And remove the 'joinable' argument from g_thread_new() and
g_thread_new_full().
Change the wording in the docs. Clarify expectations for
(deprecated) g_thread_create().
This is currently unused but will probably be useful in the
future. For example, we could have a _ARG0_IS_PATH to specify that
arg0 should be used for arg0path.
This commit breaks API and ABI. Users of
g_dbus_connection_signal_subscribe() will need to port to this new
version.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Allow constructing a GDBusProxy for well-known names as discussed here
http://mail.gnome.org/archives/gtk-devel-list/2009-October/msg00075.html
including test cases.
Make it possible to create a GDBusProxy for a GBusType instead of a
GDBusConnection. This requires G_BUS_TYPE_NONE so add that too.
Nuke g_bus_watch_proxy() since one can now more or less use GDBusProxy
for this.
Port gdbus-example-watch-proxy to this new API and include this
example in the GDBusProxy doc page.
Also nuke the GType parameter from the GDBusProxy constructors as
requested here: https://bugzilla.gnome.org/show_bug.cgi?id=621229
Also update the porting guide and other API docs for this change.
Also fix a bug in the signal dispatching code so each subscriber only
get notified once, not N times, for the same signal. Also add a test
case for this.
https://bugzilla.gnome.org/show_bug.cgi?id=621213
Signed-off-by: David Zeuthen <davidz@redhat.com>
This allows the caller to specify the reply type that they are expecting
for this call. If the reply comes back with the wrong type, GDBus will
generate an appropriate error internally.
- add a GVariantType * argument to g_dbus_connection_call() and
_call_sync().
- move the internal API for computing message types from introspection
data to be based on GVariantType instead of strings. Update users
of this code.
- have GDBusProxy pass this calculated GVariantType into
g_dbus_connection_call(). Remove the checks done in GDBusProxy.
- Update other users of the code (test cases, gdbus-tool, GSettings
tool, etc). In some cases, remove redundant checks; in some other
cases, we are fixing bugs because no checking was done where it
should have been.
Closes bug #619391.
The test was assuming that g_timeout_add() waited for at least the amount of
time given to it before running the function. This is not the case -- the
function can be run as much as 1ms early. Make the lower time bound asserted
in the test more permissive to account for this.
Lots of people been suggesting this. We still use MethodInvocation /
method_invocation for handling incoming method calls so use call()
instead of invoke_method() helps to separate the client and server
facilities. Which is a good thing(tm).
Things compile and the test-suite passes. Still need to hook up
gio.symbols and docs. There are still a bunch of TODOs left in the
sources that needs to be addressed.
Signed-off-by: David Zeuthen <davidz@redhat.com>
