It's an array containing the list of sanitizers in use, normally it
contains a value, but in some cases may have more than one (e.g.
'address' and 'undefined').
And so use it to avoid repeated checks
It looks like that finally also valgrind notices the same leaks as
address sanitizer does. It does it more randomly but it still happens,
so better to inform about until #2309 is resolved.
The test case assumes signals will dispatched in a different order than
they're subscribed. In fact, signals can be dispatched in any order,
and are often dispatched in order.
This commit reorders the subscriptions so they're in order, which is
more logical, and also changes the code to only exit the event loops
when there are no pending handlers ready to dispatch.
GDBusConnection sends each signal to recipients in a separate idle
callback, and there's no particular guarantee about the order in which
they're scheduled or dispatched. For the NameOwnerChanged signal that
reports the name becoming unowned, it's possible that g_bus_watch_name()
gets its idle callback called before the GDBusProxy:g-name-owner
machinery has updated the name owner, in which case the assertion
will fail.
Fixing GNOME/glib#3268 introduced a new subscription to NameOwnerChanged
which can alter the order of delivery, particularly in the case where
G_DBUS_PROXY_FLAGS_NO_MATCH_RULE was used (as tested in
/gdbus/proxy/no-match-rule). The resulting test failure is intermittent,
but reliably appears within 100 repetitions of that test.
Fixes: 511c5f5b "tests: Wait for gdbus-testserver to die when killing it"
Signed-off-by: Simon McVittie <smcv@debian.org>
This was a bug that existed during development of this branch; make sure
it doesn't come back.
This test fails with a use-after-free and crash if we comment out the
part of name_watcher_unref_watched_name() that removes the name watcher
from `map_method_serial_to_name_watcher`.
It would also fail with an assertion failure if we asserted in
name_watcher_unref_watched_name() that get_name_owner_serial == 0
(i.e. that GetNameOwner is not in-flight at destruction).
Signed-off-by: Simon McVittie <smcv@collabora.com>
The vulnerability reported as GNOME/glib#3268 can be characterized
as: these signals from an attacker should not be delivered to either
the GDBusConnection or the GDBusProxy, but in fact they are (in at
least some scenarios).
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268
Signed-off-by: Simon McVittie <smcv@collabora.com>
The expected result is that because TEST_CONN_SERVICE owns
ALREADY_OWNED_NAME but not (yet) OWNED_LATER_NAME, the signal will be
delivered to the subscriber for the former but not the latter.
Before #3268 was fixed, it was incorrectly delivered to both.
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268 (partially)
Signed-off-by: Simon McVittie <smcv@collabora.com>
If a connection has two signal subscriptions active for the same signal,
one with arg0 matching and one without, a signal which doesn’t contain
an arg0 value (i.e. `g_dbus_message_get_arg0()` returns `NULL`) will
cause `NULL` to be passed to `strcmp()` when checking for a match
against the signal subscription which *has* arg0 matching, causing a
crash.
Fix that by adding the obvious `NULL` check, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3342
D-Bus Activation allows passing an array of parameters. Allow apps to
export actions that accept tuples to match the number of elements in the
parameters so the full potential of the D-Bus interface can be used.
Closes: https://gitlab.gnome.org/GNOME/glib/-/issues/3333
Basically various trivial instances of the following MSVC compiler
warning:
```
../gio/gio-tool-set.c(50): warning C4267: '=': conversion from 'size_t' to 'int', possible loss of data
```
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
On GNOME/glib#3268 there was some concern about whether this would
allow an attacker to send signals and have them be matched to a
GDBusProxy in this situation, but it seems that was a false alarm.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This somewhat duplicates test_connection_signals(), but is easier to
extend to cover different scenarios.
Each scenario is tested three times: once with lower-level
GDBusConnection APIs, once with the higher-level GDBusProxy (which
cannot implement all of the subscription scenarios, so some message
counts are lower), and once with both (to check that delivery of the
same message to multiple destinations is handled appropriately).
Signed-off-by: Simon McVittie <smcv@collabora.com>
There were a couple of functions in `GDBusConnection` which take a
`user_data` argument, but which then leak it if they error out early.
A true positive spotted by scan-build!
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
The source language of GLib is technically en-US, so we should
consistently use en-US spellings.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3269
g_file_copy_async() and g_file_move_async() are written in a way that is
not bindable with gobject-introspection. The progress callback data can
be freed once the async callback has been called, which is convenient
for C, but in language bindings the progress callback closure is
currently just leaked.
There is no scope annotation that fits how the progress callback should
be treated:
- (scope call) is correct for the sync versions of the functions, but
incorrect for the async functions; the progress callback is called
after the async functions return.
- (scope notified) is incorrect because there is no GDestroyNotify
parameter, meaning the callback will always leak.
- (scope async) is incorrect because the callback is called more than
once.
- (scope forever) is incorrect because the callback closure could be
freed after the async callback runs.
This adds g_file_copy_async_with_closures() and
g_file_move_async_with_closures() for the benefit of language bindings.
See: GNOME/gjs#590
This is an introspection-friendly version of g_settings_bind_with_mapping.
Having two callbacks that share the same user data is not supported by
girepository, so the existing function is not introspectable.
Closes: #564
These consistently fail on scheduled CI runs, which is not helping our
ability to catch Hurd regressions.
For example, https://gitlab.gnome.org/GNOME/glib/-/jobs/3709402
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
See: #3148
The gdbus-example-objectmanager visibility header was being re-created
on reconfigure, causing a needless rebuild of gdbus tests that were
using the visibility header.
All other invocations of gen_visibility_macros are via custom_target.
The symbols still have to be exported from the library (since they’re
called from unit tests), but there was never any reason for them to be
in a public header.
This means they now disappear from `Gio-2.0.gir`.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3231
This property is supposed to be used by authors of applications that use GAppliaction to output the version by --version flag or otherwise if a version is needed.
Closes#3198
Signed-off-by: Maxim Moskalets <Maxim.Moskalets@kaspersky.com>
If we're writing the body to standard output, we cannot know what the
filename of the corresponding header is going to be, but it seems
vanishingly unlikely that it will be either `stdout.h` (which we would
traditionally have generated) or `-.h` (which we would have generated
since !3886).
This makes some of the output snippets sufficiently short that black(1)
requires that they are folded into a single line.
Signed-off-by: Simon McVittie <smcv@collabora.com>
In command-line tools, ordinary filenames normally do not have
special-cased meanings, so commit 3ef742eb "Don't skip dbus-codegen tests
on Win32" was a command-line API break: in the unlikely event that a
user wanted to write to a file named exactly `stdout`, this would have
been an incompatible change.
There is a conventional pseudo-filename to represent standard output,
which is `-` (for example `cat -` is a no-op filter). Adding support
for this is technically also a command-line API break (in the very
unlikely event that a user wants to write to a file named exactly `-`,
they would now have to write it as `./-`), but filenames starting with
a dash often require special treatment anyway, so this probably will not
come as a surprise to anyone.
When the output filename is `-` we don't want to use `#ifdef _____` as
a header guard, so special-case it as `__STDOUT__` as before.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This reverts commit fbdc9a2d03.
It was not submitted through a merge request and broke CI. Reverting it
immediately to unbreak CI and hence the rest of the development
pipeline. The changes can be re-submitted as a merge request so they’re
properly tested in CI before being merged.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3857#note_1994336
This fixes a race condition which frequently caused the
`memory-monitor-dbus.py` test to fail.
The registration of the `LowMemoryMonitor` object on the bus, and the
`GMemoryMonitorDBus`’s connection to the warning signal raced, such that
it was possible for the mock `LowMemoryMonitor` to emit a warning signal
before the `GMemoryMonitorDBus` proxy was listening, and hence the proxy
would never see the signal.
Fix this by explicitly synchronising the two before proceeding to the
tests.
Make the same changes in the `memory-monitor-portal.py` test too, even
though that one was not failing. This should remove the need for a 2s
wait on every test run.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #2887
Otherwise the test can go on to wait for a signal from the service
before it’s actually finished starting up.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #2887
Rather than sleeping and blocking everything, use a timeout source on
the main context so that inputs can continue to be handled while waiting
for a timeout.
This introduces no functional changes to the test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #2887
It should be doing already (or the tests would never work), but make it
clearer in the code that the same `GMainContext` is being iterated as is
being woken up in the rest of the test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #2887
