I noticed this when running the test on an Arm Morello system where varargs
have bounds. g_variant_new() was trying to read an integer using va_arg(),
but since there was no argument it resulted in a bounds errors there.
On most other architectures this will just read whatever value is contained
in the next argument register and is not something that ASan can detect, so
it never resulted in test failures.
When a cancellable is cancelled when we call g_cancellable_connect we
used to immediately call the provided callback, while this is fine we
actually had race in case the cancellable was about to be reset or in
the middle of a cancellation.
In fact it could happen that when we released the mutex, another thread
could reset the cancellable just before the callback is actually called
and so leading to call it with g_cancellable_cancelled() == FALSE.
So to handle this, make disconnect and reset function to wait for
connection emission to finish, not to break their assumptions.
This can be tested using some "brute-force" tests where multiple threads
are racing to connect and disconnect while others are cancelling and
resetting a cancellable, ensuring that all works as we expect.
This solves problems with validating untrusted inputs from D-Bus, where
invalid numbers of added and removed menu entries, and positions, could
be specified.
Original patch from
https://bugzilla.gnome.org/show_bug.cgi?id=728733#c7, tweaked by Philip
Withnall to add a few code comments and make
`G_MENU_EXPORTER_MAX_SECTION_SIZE` public so callers can check their
inputs against it if they want. Also tweaked to use `g_warning()` instead
of the nonexistent `g_dbus_warning()`.
Fixes: #861
If it takes one more `GMainContext` cycle than expected for the
`activate` signals to be handled, the `GApplication` under test can be
released too early, and the test will fail due to not seeing a high
enough value of `n_activations`.
Hopefully avoid that by moving the release to a low priority idle
callback.
This fix is only hopeful because I’ve only been able to reproduce the
failure on FreeBSD CI and not locally.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2835
The timeout is just to stop the test hanging forever, so there’s no need
for it to be so short. It’s caused at least one spurious CI failure:
https://gitlab.gnome.org/GNOME/glib/-/jobs/2445023.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2837
GDesktopAppInfo never failed in the most simple of the cases: when a
desktop file or a command line app info was pointing to an invalid
executable (for the context).
The reason for this is that we're launching all the programs using
gio-launch-desktop which will always exist in a sane GLib installation,
and thus our call to execvp won't ever fail on failure.
This was partially mitigated by not allowing to create a desktop app
icon using a non-existent executable (even if not fully correctly) but
still did not work in case a custom PATH was provided in the launch
context.
To avoid this, use g_find_program_for_path() to find early if a program
that we're about to launch is available, and if it's not the case return
the same error that g_spawn_async_with_fds() would throw in such cases.
While this is slowing a bit our preparation phase, would avoid to leave
to the exec function the job to find where our program is.
Add tests simulating this behavior.
We used to launch applications with terminals using the normal program
finder logic that did not consider the context path nor the desktop file
working dir. Switch to g_find_program_for_path() to find terminals so we
can ensure that both conditions are true.
Update tests to consider this case too.
The platform data comes from the parent process, which should normally
be considered trusted (if we don’t trust it, it can do all sorts of
other things to mess this process up, such as setting
`LD_LIBRARY_PATH`).
However, it can also come from any process which calls `CommandLine`
over D-Bus, so always has to be able to handle untrusted input. In
particular, `v`-typed `GVariant`s must always have their dynamic type
validated before having values of a static type retrieved from them.
Includes unit tests.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
These actions are activated as a result of receiving the `ActionInvoked`
signal from `org.freedesktop.Notifications`. As that’s received from
another process over D-Bus, it’s feasible that it could be malformed.
Without validating the action and its parameter, assertions will be hit
within the `GAction` code.
While we should be able to trust whatever process owns
`org.freedesktop.Notifications`, it’s possible that’s not the case, so
best validate what we receive.
Includes unit tests.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
This test is fairly pointless, but puts the infrastructure in place for
adding more tests for `GFdoNotificationBackend` in upcoming commits.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
As with the previous commit, the arguments to `ActivateAction` have to
be validated before being passed to `g_action_group_activate_action()`.
As they come over D-Bus, they are coming from an untrusted source.
Includes unit tests for all D-Bus methods on `GApplication`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
The action name, parameter and new state are all controlled by an
external process, so can’t be trusted. Ensure they are validated before
being passed to functions which assert that they are correctly typed and
extant.
Add unit tests.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1904
Some applications (eg., gnome-photos) really want a large thumbnail,
if one can be created. Simply falling back to a smaller one (probably
created by an old nautilus), without giving the application a chance
to create a bigger thumbnail, is undesirable because they will appear
fuzzy.
Therefore, at separate attribute sets for all the thumbnail sizes
that are supported in the spec: normal/large/x-large/xx-large.
The old attribute will now return by default the biggest available, as
it used to be, but also including the x-large and xx-large cases.
Co-Authored-by: Marco Trevisan <mail@3v1n0.net>
Fixes: #621
Do not search in path for snapctl to avoid it to be potentially
overridden by changing the PATH env variable.
Still allow testing by using an ifdef to check if we're building for the
test files or not.
Test all the snap cases and the unknown sandbox one.
We need to use different test processes as we initialize the portal
type early enough that it can't be changed later.
Classic snaps are just a kind of packages with no sandbox at all, so
there's no point to mark them as sandboxed.
In this way we can just do IO checks once without having to multiply
them.
Co-Authored-by: Robert Ancell <robert.ancell@canonical.com>
This reverts commit 19353017a7.
The freedesktop SDK, which is used by gnome-build-meta, only has Meson
0.63. Bumping GLib’s Meson dependency to 0.64 means that, at the moment,
GLib is not buildable in gnome-build-meta and hence can’t be tested in
nightly pipelines against other projects, etc.
That’s bad for testing GLib.
It’s arguably bad that we’re restricted to using an older version of
Meson than shipped by Debian Testing, but that’s a separate discussion
to be had.
Revert the Meson 0.64 dependency until the freedesktop SDK ships Meson ≥
0.64. This also means reverting the simplifications to use of
`gnome.mkenum_simple()`.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3077#note_1601064
This is a spiritual follow-up to commit 8cff531520, which
added `G_TEST_OPTION_ISOLATE_DIRS` to the `gdbus-connection-flush` test
to avoid its D-Bus cookie lock file from being erroneously deleted by
other tests running in parallel.
The same failure mode could affect any of the other D-Bus tests which
connect to a bus. As an easy fix, enable `G_TEST_OPTION_ISOLATE_DIRS`
for all of them.
The only test it’s not (yet) enabled for is `gdbus-address-get-session`
as that messes around with `XDG_RUNTIME_DIR` to test finding the session
bus. It might be possible to use `G_TEST_OPTION_ISOLATE_DIRS` with it,
but that would take longer than I have right now.
In any case, the more tests (which try to connect to a bus) that this is
enabled for, the lower the chances of spurious test failure due to them
conflicting over shared resources.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Because Meson complains about using `configure_file(copy: true)`.
Includes improvements by Xavier Claessens.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It sometimes fails under valgrind, and is pointless: if the test is
wedged, it’s better to catch that with the timeout at the level of
`meson test`, which can be tailored (using `-t`) to the test environment
and wrapper.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2961#note_1600072
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Instead, iterate the `GMainContext` directly. This allows tests on
asynchronously returned values to be done in the actual test function,
rather than a callback, which should make the tests a little clearer.
This introduces no functional changes.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Do not use can_run_host_binaries() as it returns true even though
custom_target() does not currently correctly wrap target-built
tool binaries with exe_wrapper so they can be run on the host.
See https://github.com/mesonbuild/meson/issues/11029
This typically indicates a bug in the program, where a GTask has been
created, but a bug in the control flow has caused it to not return a
value.
There is one situation where it might be legitimate to finalise a GTask
without returning: if an error happens in your *_async() start function
after you’ve created a GTask, but before the async operation returns to
the main loop; and you report the error using g_task_report_*error()
rather than reporting it using the newly constructed GTask.
Another situation is where you are just using GTask as a convenient way
to move some work to another thread, without the complexity of creating
and running your own thread pool. GDBus does this with
g_dbus_interface_method_dispatch_helper(), for example.
In most other cases, it’s a bug. Emit a debug message about it, but not
a full-blown warning, as that would create noise in the legitimate
cases.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
the gio dbus codegen test has 10 test cases in it.
Each test case is given 100 seconds to complete.
That is far longer than they should need.
Furthermore, the entire test is only given 60s
to complete.
This commit makes the internal timeout more consistent
with the external timeout, by giving each of the 10
test cases 6 seconds instead of 100s.
That’s what xdgmime uses for zero-sized files (see `XDG_MIME_TYPE_EMPTY`).
Historically, GLib explicitly used `text/plain` for empty files, to
ensure they would open in a text editor. But `text/plain` is not really
correct for an empty file: the content isn’t text because there is no
content. The file could eventually become something else when written
to.
Text editors which want to be opened for new, empty files should add
`application/x-zerosize` to their list of supported content types.
Users who want to set a handler for `application/x-zerosize` on their
desktop should use
```sh
gio mime application/x-zerosize # to see the current handler
gio mime application/x-zerosize org.gnome.gedit.desktop # to set it
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2777
`HAVE_COCOA` should be used only in the places where we’re actually
depending on the Cocoa toolkit. It should not be used as a general way
of detecting building on a Darwin-based OS such as macOS.
Conversely, there are a few places in the code where we do want to
specifically detect the Cocoa toolkit (and others where we specifically
want to detect Carbon), so keep `HAVE_COCOA` and `HAVE_CARBON` around.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2802
This reverts commit 476e33c3f3.
We’ve decided to remove `G_OS_DARWIN` in favour of recommending people
use `__APPLE__` instead. As per the discussion on #2802 and linked
issues,
* Adding a new define shifts the complexity from “which of these
platform-provided defines do I use” to “which platform-provided
defines does G_OS_DARWIN use”
* There should ideally be no cases where a user of GLib has to use
their own platform-specific code, since GLib should be providing
appropriate abstractions
* Providing a single `G_OS_DARWIN` to cover all Apple products (macOS
and iOS) hides the complexity of what the user is actually testing:
are they testing for the Mach kernel, the Carbon and/or Cocoa user
space toolkits, macOS vs iOS vs tvOS, etc
Helps: #2802
Some of GLib's unit tests are under an apparently GLib-specific
permissive license, vaguely similar to the BSD/MIT family but with the
GPL's lack-of-warranty wording. This is not on SPDX's list of
well-known licenses, so we need to use a custom license name prefixed
with LicenseRef if we want to represent this in SPDX/REUSE syntax.
Most of the newer tests seem to be licensed under LGPL-2.1-or-later
instead.
Signed-off-by: Simon McVittie <smcv@collabora.com>
In g_proxy_resolver_lookup_async() we have some error validation that
detects invalid URIs and directly returns an error, bypassing the
interface's lookup_async() function. This is great, but when the
interface's lookup_finish() function gets called later, it may assert
that the source tag of the GTask matches the interface's lookup_async()
function, which will not be the case.
As suggested by Philip, we need to check for this situation in
g_proxy_resolver_lookup_finish() and avoid calling into the interface
here if we did the same in g_proxy_resolver_lookup_async(). This can be
done by checking the source tag.
I added a few new tests to check the invalid URI "asdf" used in the
issue report. The final case, using async GProxyResolver directly,
checks for this bug.
Fixes#2799
We need to make sure that such binaries are built and available at test time
or we may fail some tests requiring them (directly or through desktop file).
As per this, and because now generated desktop files are available both
at build and install time, don't skip some tests we were used to, but
actually enforce they are running.
We have some test programs on which some tests depend on, for example
appinfo-test is a tool that is used by the desktop-app-info tests.
So test can now have an 'extra_programs' key where the extra program
names can be included.
This could have been handled manually via 'depends', but this allows
to avoid repeating code and be sure that all is defined when extra
programs targets are checked.
`g_app_info_launch_default_for_uri_async()` has already returned by this
point, so waiting a long time is not really going to help.
Wait for 3× as long as the successful case took, which should allow for
long enough to catch true negatives, with a bit of variance.
On my system, this means waiting for about 14ms, rather than the 100ms
which this previous slept for. This speeds the test up by about 5%.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
We were generating .desktop files with different content when installed
tests were enabled, and thus making impossible to test some cases
because there was no built file until installed.
To avoid this, always generate both versions of desktop files while
install only the one containing the install path prefix if needed.
Given that it can be computed using an error-prone strings comparisons it
is better to provide a variable everywhere, so that we don't have the
risk of comparing values that are always false.
We have tests that are failing in some environments, but it's
difficult to handle them because:
- for some environments we just allow all the tests to fail: DANGEROUS
- when we don't allow failures we have flacky tests: A CI pain
So, to avoid this and ensure that:
- New failing tests are tracked in all platforms
- gitlab integration on tests reports is working
- coverage is reported also for failing tests
Add support for `can_fail` keyword on tests that would mark the test as
part of the `failing` test suite.
Not adding the suite directly when defining the tests as this is
definitely simpler and allows to define conditions more clearly (see next
commits).
Now, add a default test setup that does not run the failing and flaky tests
by default (not to bother distributors with testing well-known issues) and
eventually run all the tests in CI:
- Non-flaky tests cannot fail in all platforms
- Failing and Flaky tests can fail
In both cases we save the test reports so that gitlab integration is
preserved.
G_MODULE_SUFFIX is deprecated now because you will get the wrong
results using it most of the time:
1. The suffix on macOS is usually 'dylib', but it's 'so' when using
Autotools, so there's no way to get the suffix correct using
a pre-processor macro.
2. Prefixes also vary in a platform-specific way. You may or may not have
a 'lib' prefix for the name on Windows and on Cygwin the prefix is
'cyg'.
3. The library name itself can vary per platform. For instance, you may
want to load foo-1.dll on Windows and libfoo.1.dylib on macOS. This
is for libraries, not modules, but that is still a use-case that
people use the GModule API for.
g_module_build_path() does take care of (2) on Cygwin, but it
fundamentally cannot handle the possibility of multiple options for
the module name, since it does not do any I/O. Hence, it is also
deprecated.
Instead, g_module_open() has been improved so that it takes care of
all this by searching the filesystem for combinations of possible
suffixes and prefixes on each platform. Along the way, the
documentation for it was also improved to make it clearer what it
does.
Closes https://gitlab.gnome.org/GNOME/glib/-/issues/520
Closes https://gitlab.gnome.org/GNOME/glib/-/issues/1413
In principle we could script this so that each max-version.c is compiled
26 times, once per possible MAX_VERSION, but I haven't implemented
that here: just pinning to the oldest possible version is sufficient to
reproduce #2796.
These aren't included in the installed-tests, since they don't really
do anything at runtime (the important thing is that they compile
without warnings).
Reproduces: #2796
Signed-off-by: Simon McVittie <smcv@collabora.com>
Previously it was marked as failing on macOS, but commit
ed3998b390 seems to have fixed that. yay!
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1392
The access and creation time tests create a file, gets the time in
seconds, then gets the time in microseconds and assumes that the
difference between the two has to be above 0.
As rare as this may be, it can happen:
$ stat g-file-info-test-50A450 -c %y
2021-07-06 18:24:56.000000767 +0100
Change the test to simply assert that the difference not negative to
handle this case.
This is the same fix as 289f8b, but that was just modification time.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Freebsd doesn't always have /proc mounted, so relying on
/proc for the tests isn't ideal.
This commit changes the desktop-app-info tests to use
mkfifo instead of /proc/../fd/.. to relay terminal
arguments.
Might help with this error message I'm seeing in CI:
/tmp/bin-path-H1UQT1/gnome-terminal: cannot create /proc/38961/fd/6: No such file or directory
In case the XDG database is not initialized yet we may try to sniff a
0-length data, making our content-type routines to mark non-empty files
as `application/x-zerosize`.
This is wrong, so in case the sniff size is not set, let's just
try to read the default value. To avoid false-application/x-zerosize
results (that are not something we want as per legacy assumptions).
See: https://bugzilla.gnome.org/show_bug.cgi?id=755795
Fixes: https://gitlab.gnome.org/GNOME/glib/-/issues/2742
It’s often (but not always) failing on the CI machines with a timeout
which looks like the FD sharing via `/proc` isn’t reliably working.
Disable this test (but not the whole `desktop-app-info` test suite) on
FreeBSD until someone who has access to a FreeBSD machine can debug it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2781
The implementation of `g_desktop_app_info_launch_uris()` will spawn the
exec file once for each URI unless the desktop file has a placeholder in
its Exec line which supports multiple URIs at once.
The fake terminal doesn’t have such a placeholder, so the fake terminal
script is spawned twice in quick succession, once for each URI. Since it
was making two separate printf calls (one to print the output to the
pipe, and one to terminate it with a newline), it’s possible that two
invocations of the script could interleave their printf calls, resulting
in pipe input along the lines of `URI1 URI2 newline newline` rather than
`URI1 newline URI2 newline`.
This would cause the test to fail.
Fix that by making the script atomic by moving the newline into the
first printf call.
See: https://gitlab.gnome.org/GNOME/glib/-/jobs/2339109:
```
\# Fake 'nxterm' terminal created as: /tmp/bin-path-R6GWT1/nxterm
\# 'nxterm' called with arguments: '-e true nxterm-argument /tmp/bin-path-R6GWT1-e true nxterm-argument /tmp/test_desktop-app-info_CO92T1/desktop-app-info/launch-uris-with-terminal/nxterm/.dirs/data'
Bail out! GLib-GIO:ERROR:../gio/tests/desktop-app-info.c:1294:test_launch_uris_with_terminal: assertion failed (g_strv_length (output_args) == 4): (7 == 4)
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The cancellable may be cancelled just after the operation succeeds in a
different thread. So instead of checking whether the cancellable is
cancelled, check whether the operation returned a `CANCELLED` error, and
*then* assert that the cancellable is cancelled.
This should fix
https://pwithnall.pages.gitlab.gnome.org/-/glib/-/jobs/2338552/artifacts/_build/meson-logs/testlog.txt:
```
ok 1 /unix-streams/basic
Bail out! GLib-GIO:ERROR:../gio/tests/unix-streams.c:149:main_thread_skipped: assertion failed (err == (g-io-error-quark, 19)): err is NULL
stderr:
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The g_content_type_get_icon() function for win32 can lookup the
DefaultIcon associated with .txt and return a different result.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
On Win32, we get paths with mixed \\ and /, use GFile to resolve and
normalize the paths before comparing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Otherwise, the build will fail when the toolchain is static-only, even
with -Ddefault_library=static. I talked to a Meson developer in their
IRC channel, who told me that the correct fix was to ensure that
shared_library is only used if default_library != static.
Simulate launching applications using terminals by creating scripts on
the fly that are named as the terminals that we support, ensuring that
these are called with the arguments that we expect.
Related to: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2839
Check if thumbnails are created in the path we expect and that we can
retrieve their information, but also that we try to get the biggest size
available when multiple are available.
We've various macros definitions that are depending using C++ features
that may not work in all the standard versions, so recompile the cxx
tests that we have in all the ones we want to support.
desktop-app-info test may fail when repeated with multiple concurrent
processes because the actions test relies on checking the existence of
in the shared build directory, so by doing something like:
meson test -C _build desktop-app-info -t 0.3 --repeat 80
We may end up in timeout errors, because we are waiting for files that
have been already deleted by other processes.
To avoid this, let's rely on writing the files on `$G_TEST_TMPDIR` env
variable, that is always set and unique, given that we're using the
G_TEST_OPTION_ISOLATE_DIRS test option.
We were testing the case in which we were opening an actual file, and so
potentially using a fd-list, however we were missing the case in which a file
was not existent.
And in such case we are incidentally hitting a leak now.
All of these warnings indicate programmer error, so critical is most
appropriate here.
Exceptions: deprecation warnings are just warnings. Also, warnings that
are worded with uncertainty can remain warnings rather than criticals.
Enumeration members should either have the name of the type as their
prefix, or they should all have the same prefix.
The "default flags" enumeration member for GApplicationFlags is
unfortunately named G_APPLICATION_FLAGS_NONE, while every other member
of the same type has a G_APPLICATION prefix. The result is that the nick
name of the enumeration member is "flags-none", and that language
bindings will have to use something like
Gio.ApplicationFlags.FLAGS_NONE.
To fix this API wart, we can deprecate the FLAGS_NONE member, and add a
new DEFAULT_FLAGS.
A shell one-liner was enough to set GIO_LAUNCHED_DESKTOP_FILE_PID,
but ideally we also want to do the equivalent of sd_journal_stream_fd()
to set up its standard output and standard error streams.
Ideally we would call sd_journal_stream_fd() in a process that will
exec the real program, otherwise it will report the wrong process ID
in the Journal, but we can't easily do that in a forked child when
using posix_spawn() for subprocesses.
This reverts commit 2b533ca99a.
Signed-off-by: Simon McVittie <smcv@collabora.com>
The dominant implementations of the well-known session and system
message buses are the reference implementation from the dbus project
(dbus-daemon) and the sd-bus-based reimplementation dbus-broker, both
of which have correct implementations for EXTERNAL authentication with
an unspecified authorization identity.
This makes it reasonably safe to assume that the well-known message
buses can cope with the unspecified authorization identity, even if we
cannot make the same assumption for custom servers such as the ones
used in ibus and gvfs (which might have been started with an older
GLib version before upgrading GLib in-place).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Instead of using a GDBusConnection, this does the handshake at a lower
level using specific strings in the SASL handshake, to verify that we
will interoperate with various clients including sd-bus, libdbus and
older versions of GDBus.
Signed-off-by: Simon McVittie <smcv@collabora.com>
We don't need a cpp toolchain for building glib so lets just
automatically disable tests requiring one when not available.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
The test was flacky because we were only relying on the presence of a
file, while the callback could have not been called yet, while ensure
for both assumptions to be true before stop iterating the loop.
These headers have all been written manually, by looking through the git
log for each file and noting the copyright of each significant
contribution.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
It doesn't make sense for a proxy resolver to return NULL without an
error on the first call. Whereas a DNS resolver would do this to
indicate that a query completed successfully but found no results, a
proxy resolver should return "direct://" instead. Therefore, if we are
going to return NULL, we ought to have an error as well. Let's make sure
this actually happens by adding some fallback errors just in case
GProxyResolver feeds us weird results.
Additionally, we should not return any errors except
G_IO_ERROR_CANCELLED after the very first iteration. This is an API
contract of GSocketAddressEnumerator. Let's add some checks to ensure
this.
Note that we have inadequate test coverage for GProxyAddressEnumerator.
It's tested here only via GSocketClient. We could do a bit better by
testing it directly as well. For example, I've added tests to see what
happens when GProxyResolver returns both a valid and an invalid URI, but
it's not so interesting here because GSocketClient always uses the valid
result and ignores the error from GProxyAddressEnumerator.
Fixes#2597
This has no practical impact, since it's only a test, and none of the
test code would have hit this bug, but the GTestProxyResolver's check to
see if the URI scheme is simple:// currently only compares the first
four bytes of the string, so it's actually only checking for the "simp"
and would match anything else after that, e.g. "simpleton://". This is
surely not intended.
This was causing intermittent failures on macOS, depending on whether
the tmpdir ended with a `/` or `/some-dir`. `g_strrstr()` is not the
right function to use to extract a basename from a path, for this
reason.
When it failed, the macOS test was failing with:
```
ok 16 /gsubprocess/env
Bail out! GLib-GIO:ERROR:../gio/tests/gsubprocess.c:1507:test_cwd: assertion failed (basename == tmp_lineend_basename): ("/T\n" == "/\n")
```
The test now passes reliably, which means that it can be removed from
the list of expected failures on macOS.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1392
On macOS the comparison was failing as one of the paths had a trailing
slash while the other didn’t.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Despite the name, we still used blocking calls to get the default app
for URI, now that we have an async implementation of the API to get the
default implementation for URI scheme, we can remove the blocking calls.
We did not check whether this function worked before, so add a simple
test case for it, providing some test functions to make it possible to
reply the same behavior
While it's possible to create a directory synchronously via
g_dir_make_tmp(), there's no such API that performs it asynchronously.
So implement it using GFile, using a thread to perform such task.
It seems this script has potentially never worked properly under Python
3. It’s supposed to list all the `_get_type()` functions it can find in
the GIO headers, but since the regex string passed to `re.search()` was
not a Python regex, nothing was matching.
Fix that, and do another few small cleanups to the script.
This makes the `defaultvalue` test not skip all the types.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When running under a strict TAP parser this was previously producing
problematic non-conforming output.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The interface was ready for this API but it was not provided.
So implement this, using a thread that calls the sync API for now.
Add tests.
Helps with: GNOME/glib#157
Dynamically, these will only ever be used after they’ve been initialised
due to correct checking of `use_udp` throughout the test. However,
that’s a global variable and the static analyser is assuming it might
change value. So help it out by NULL-initialising the variables so they
can never be used uninitialised.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>