There are two consistent interpretations that could be taken for memory
handling of the 'invocation' parameter passed to the method_call() virtual
function of GDBusInterfaceVTable
- A reference is passed (transfer full) to the method_call() virtual function,
and that reference is then passed (transfer full) to the return_value/error
functions on GDBusMethodInvocation.
- An internal reference is retained from the point where method_call() is called
until the return_value/error function is called.
Since the return_value/error functions were already marked (transfer full),
we use the first interpretation, annotate the invocation parameter of
method call as (transfer full) and describe this in the documentation, along
with the idea that you are always supposed to call one of the return_value/error
functions.
See bug 738122 for the leak this caused in GJS.
https://bugzilla.gnome.org/show_bug.cgi?id=738259
Clarify in the documentation that a GSource created with
g_cancellable_source_new() must be explicitly removed from its
GMainContext before the GCancellable can be finalised.
This could be a common way of leaking GCancellables.
https://bugzilla.gnome.org/show_bug.cgi?id=737259
da053e34 broke the tls-certificates test by requiring the backend to
implement g_tls_certificate_verify() (which the test TLS backend
didn't). Add a trivial implementation to make the test pass again;
we'll need something more complicated when we add tests that are
supposed to get errors.
So shortcut it.
I wrote this patch less as a performance optimization and more as a
clarification, so that people looking at the code can be assured of this
invariant.
https://bugzilla.gnome.org/show_bug.cgi?id=738374
These functions are inconsistent with our normal conventions in that
they set an output variable to a specified value, even in the case that
an error is thrown.
Document very clearly that this should be considered exceptional.
https://bugzilla.gnome.org/show_bug.cgi?id=737451
Similar to the previous patch, this commit contains a minor violation of
normal API conventions. See the explanation in the previous commit
message.
Heavily based on a patch from Ignacio Casal Quinteiro.
https://bugzilla.gnome.org/show_bug.cgi?id=737451
Add an asynchronous version of _read_all().
This API is not fully consistent with the normal expectations of a
non-asynchronous version. Consistency between the sync and async version is
probably more important.
The API will still bind correctly, but access to all functionality will
not be available: specifically, in the case of an error, higher level
languages will be unable to determine how many bytes were successfully
read before the error. Most users will probably not want to use this
information anyway, so this is OK -- and if they do need the
information, then they can just write the loop for themselves.
Heavily based on a patch from Ignacio Casal Quinteiro.
https://bugzilla.gnome.org/show_bug.cgi?id=737451
Commit e24e89b accidentally ironically introduced a typo when replacing
the code with symbolic contents. Specifically, "Added Associations" was
replaced with "Default Applications" when reading defaults.list, giving
a warning about the file containing a "Default Applications" group.
If this was intended, it should have not been lumped in with a cleanup.
This patch changes the behavior of the following functions:
g_tls_certificate_new_from_pem
g_tls_certificate_new_from_file
g_tls_certificate_new_from_files
If more than one certificate is found it will try to load the chain.
It is assumed that the chain will be in the right order (top-level
certificate will be the last one in the file). If the chain cannot be
verified, the first certificate in the file will be returned as before.
https://bugzilla.gnome.org/show_bug.cgi?id=729739
g_thread_pool_push() only returns an error if it fails to spawn a new
thread. However, it unconditionally adds the task to its worker queue,
so:
• if _any_ threads exist in the pool, the task will eventually be
handled; and
• if _no_ threads exist in the pool, the task will be handled if one
is eventually successfully spawned.
If no more threads are ever spawned, the process probably has bigger
problems than a single GTask which is taking forever to complete.
https://bugzilla.gnome.org/show_bug.cgi?id=736806
For the GPtrArray example, several variables declared on the same line
is harder to read and to work with (to move, remove or comment a single
variable declaration).
Some desktop file directories, like /usr/local/share/applications may be
missing on some systems.
When we try to inotify on these directories, this will result in a
every-4-seconds poll being setup which is quite bad.
This is an issue that should be fixed in inotify itself but the problem
is much larger there. For now, we can work around it in GDesktopAppInfo
by refusing to monitor missing directories.
We may get some spurious notifications of changes in the case that
/usr/local/share or /usr/local/share/applications is created without
actually adding desktop files, but spurious changes can already be
reported in other cases, so that's OK. We won't get (user-visible)
notification for a simple case of a completely unrelated file being
created (however we cannot avoid the wakeup in this case due to how
inotify works). That's probably pretty theoretical, though, since files
in /usr don't change much and for the home directory we're likely to
have at least ~/.config and ~/.local existing.
https://bugzilla.gnome.org/show_bug.cgi?id=736350
We use "tweaks" structures to track how a particular directory impacts
the list of added, removed and default applications. We maintain this
set of tweaks for each directory, in a hash table, keyed by unaliased
mime type name, in order to facilitate fast lookups.
A typo in the logic for creating and maintaining the uniqueness of these
structures was causing the default app to be selected incorrectly from
time to time. Fix that.
If a g_socket_client_connect_async() operation is cancelled between the
CONNECTING and CONNECTED events (i.e. while in the
g_socket_connection_connect_async() call), the code in
g_socket_client_connected_callback() would previously unconditionally
loop round and try the next socket address from the address enumerator
(by calling enumerator_next_async()). This would correctly handle the
cancellation and return from the overall task — but not before emitting
a spurious RESOLVING event.
Avoid emitting the spurious RESOLVING event by explicitly handling
cancellation at the beginning of g_socket_client_connected_callback().
https://bugzilla.gnome.org/show_bug.cgi?id=735179
This function adds a single main option entry to be handeled by
GApplication. The option entry has it arg_data field set to NULL
and will be added to the applications packed_options.
The rationale for this is that bindings will be able to add
command line options even when they can't use the un-boxed struct
GOptionEntry.
https://bugzilla.gnome.org/show_bug.cgi?id=727455
It turns out that this bug actually would (sometimes) impact any sort of
fixed-sized array with an alignment requirement of 8 due to incorrectly
counting the alignment inserted between the (aligned 4) array length and
the actual data.
Fix this properly and remove the exception for doubles.
https://bugzilla.gnome.org/show_bug.cgi?id=732754
We're using a precondition in the middle of the function, and if we
hit it, we leak the closure.
Let's allocate the closure per path; this allows us to allocate it
before path-specific preconditions, and better avoids a pointless
malloc/free pair in the unhandled case.
https://bugzilla.gnome.org/show_bug.cgi?id=733576
This is a best-effort approach to preventing SIGPIPE emissions on Darwin
and iOS, where they continue to be intercepted by the Xcode debugger
even if SIG_IGN prevents them crashing the program.
This is similar to the existing code which sets MSG_NOSIGNAL on all
send() calls. MSG_NOSIGNAL doesn't exist on Darwin though.
Based on a patch from Philip Withnall.
https://bugzilla.gnome.org/show_bug.cgi?id=728730
When establishing a D-Bus connection failed, g_dbus_object_manager_client_finalize()
calls g_object_ref(manager->priv->connection) when that pointer is NULL,
which is considered and logged as error by glib.
https://bugzilla.gnome.org/show_bug.cgi?id=732984
We don't use this for anything inside of GApplication yet, but Gtk is
about to start using it to find various bits of the application (such as
its menus, icons, etc.).
By default, we form the base path from the application ID to end up with
the familiar /org/example/app style.
https://bugzilla.gnome.org/show_bug.cgi?id=722092
This is not a functional change, as the hints field is static and hence
automatically initialised to zero — which happens to be what AF_UNSPEC
and the unspecified protocol are defined as. However, it’s best to be
explicit about this, in case AF_UNSPEC is _not_ defined as zero.
https://bugzilla.gnome.org/show_bug.cgi?id=732739
I recently needed to nul-terminate the returned buffer, and I wasn't
sure if g_input_stream_read() does that or not. I've checked
glocalfileinputstream.c, which calls read(2) which doesn't nul-terminate
the buffer. So I assume it's the same behavior for all GInputStream
subclasses.
https://bugzilla.gnome.org/show_bug.cgi?id=732704
When using this API, I wasn't sure what the cancellable does. I think
it's generally desirable to kill the subprocess if the wait operation is
cancelled, since in this case the application is no longer interested by
the subprocess.
https://bugzilla.gnome.org/show_bug.cgi?id=732704
A critical message is printed when a parameter of g_file_equal() is not
a GFile. When we read the documentation before this commit, we can think
that passing NULL or another type than GFile is allowed, but it is not
the case.
Another option is to allow NULL parameters. But for consistency with
e.g. g_str_equal(), it's probably better to keep the code as is.
https://bugzilla.gnome.org/show_bug.cgi?id=732357
- g_subprocess_launcher_spawn() and spawnv(): there is no other way
AFAIK to create a GSubprocess from a launcher. So these
functions are not "convenience helper".
- annotate optional arguments for g_shell_parse_argv().
- other trivial fix
https://bugzilla.gnome.org/show_bug.cgi?id=732357
Document that giving %NULL for the activate handler is supported since
GLib 2.40. We documented this on GSimpleAction itself (where the
default handler functionality is implemented) but expecting the user to
dig that up is asking a bit much.
Also, add some more explicit documentation about the conditions under
which each field is expected to be filled in.
https://bugzilla.gnome.org/show_bug.cgi?id=732429
This property has been deprecated for three years after only having
existed for one. We've wanted to reuse the name for all that time, so
let's try to actually remove it now and see if we can get away with it.
https://bugzilla.gnome.org/show_bug.cgi?id=732102
Instead of closing the sockets explicitly, let them close themselves
when their final reference is dropped. This makes use of
g_socket_listener_add_socket() more natural.
https://bugzilla.gnome.org/show_bug.cgi?id=732107
This is quite important, as it means you can safely let the GSocket drop
out of scope while maintaining a reference to the GSource, and the
socket will remain open. That means fewer closure structures, simpler
code, and fewer allocations.
https://bugzilla.gnome.org/show_bug.cgi?id=732081
'folder' is the name of the folder icon in the incon naming spec,
and the Adwaita icon theme doesn't include an inode-directory icon.
This fixes folders appearing as generic file in the file chooser.
https://bugzilla.gnome.org/show_bug.cgi?id=731996
The stdout FD passed to dbus-daemon is propagated to all its child
processes, such as service activated processes. If we close the FD after
reading the bus address from the daemon, any child process which
subsequently writes to stdout (e.g. for logging) will get a SIGPIPE and
explode.
Instead of closing the stdout FD immediately after dbus-daemon has
spawned, keep it open until the daemon is killed.
https://bugzilla.gnome.org/show_bug.cgi?id=732019
Availability of the g_nextstep_settings_backend_get_type() prototype
is controlled by HAVE_COCOA in gsettingsbackendinternal.h and the
actual implemenation by OS_COCOA in Makefile.am. Therefore, the
giomodule.c call to that function should also be protected by a COCOA
token rather than an CARBON token (cocoa and carbon are independent
autoconf tests).
https://bugzilla.gnome.org/show_bug.cgi?id=731425
GResolver doesn't do full validation of its inputs, so in some of
these tests, the fact that we were getting back
G_RESOLVER_ERROR_NOT_FOUND is because the junk string was getting
passed to an upstream DNS resolver, which returned NXDOMAIN. But if
there's no network on the machine then we'd get
G_RESOLVER_ERROR_INTERNAL instead in that case.
Windows does not like g_unlink() to be called on files whose file
descriptor is still open, so doing that would cause a permission
denied error. Since the fd is not used in that function after
acquiring the temp file, close it earlier before
g_file_set_contents(), so that it can complete successfully.
This fixes a number of GTK+ tests on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=719344
- GSubprocessLauncher exists since 2.40, not 2.36
- more logical order for g_markup functions
- fix short description of GMarkup
- GMarkupParser: specify that some parameters are NULL-terminated.
- g_string_new (NULL); is possible.
- other trivial fixes.
https://bugzilla.gnome.org/show_bug.cgi?id=728983
* removed passing GError to ensure_input_padding() function
- it was necessary before commit 3e5214c15c
when we used GData*Streams and GMemoryInputStream with
g_seekable_seek() - now it's useless,
* removed checking return value of ensure_input_padding()
function - in previous implementation (like above)
g_seekable_seek() could return FALSE - now it's always TRUE,
* removed passing GError to g_memory_buffer_read_*() functions
and checking returned value - it also has been inherited after
old implementation with g_data_input_stream_read_*() functions
- now it's also useless
* cleaned up code formatting,
https://bugzilla.gnome.org/show_bug.cgi?id=729875
Expand the functionality of g_desktop_app_info_set_desktop_env() to
include the possibility of passing strings containing ':' characters (as
some apps, such as gnome-session, are directly passing the value of
XDG_CURRENT_DESKTOP). At the same time, deprecate it, since now we get
the list from the environment variable for ourselves.
Modify the checks in g_desktop_app_info_get_show_in() to deal with
multiple items listed in XDG_CURRENT_DESKTOP. For example, if we find
that we have
XDG_CURRENT_DESKTOP=GNOME-Classic:GNOME
and a desktop file contains:
OnlyShowIn=GNOME
then we will show this file because of the fallback to GNOME. If the
file _also_ contains the line:
NotShowIn=GNOME-Classic
Then we will not show it, because GNOME-Classic comes before GNOME in
XDG_CURRENT_DESKTOP.
https://bugzilla.gnome.org/show_bug.cgi?id=729813
GDummyTlsConnection didn't implement the "interaction" property,
meaning you'd get warnings if you tried to set it while creating a
GTlsConnection when using the dummy backend. (Of course, trying to
create the GTlsConnection will fail anyway, but it ought to fail
without hitting any g_warnings.)
It was previously possible for GThreadedResolver to return an empty list
and no error in response to a g_resolver_lookup_by_name() call, if it
happened that all the addresses returned by getaddrinfo() could not be
converted from native addresses to GSocketAddresses.
Fix that by setting a G_RESOLVER_ERROR_NOT_FOUND if the returned list is
empty.
https://bugzilla.gnome.org/show_bug.cgi?id=728776
The documentation previously wasn’t clear about whether the GResolver
methods could return an empty list and no error. On balance, this seems
like a bad idea, and GResolver should commit to always return a
non-empty list, or an error (which should be G_RESOLVER_ERROR_NOT_FOUND
if the list would otherwise be empty).
https://bugzilla.gnome.org/show_bug.cgi?id=728776
ddf82a25 removed the use of non-literal format strings from
gthreadedresolver.c, but left the "#pragma GCC diagnostic ignored
-Wformat-nonliteral" behind.
These did show up in the html. Since symbol names are checked for a
trailing plural s when generating the docs, the links stay functional
after removing these comments.
https://bugzilla.gnome.org/show_bug.cgi?id=728380
Redo the code for type-based selection of applications (all,
recommended, default, fallback) based on the new DesktopFileDir
structures that we introduced last cycle.
At the same time, we expand the functionality to add support for the new
features of the specification:
- moving ~/.local/share/applications/mimeapps.list to ~/.config/
- per-desktop default applications (via XDG_CURRENT_DESKTOP)
- sysadmin customisation of defaults (via /etc/xdg/mimeapps.list)
- deprecation of the old defaults.list, favouring the use of
/usr/share/applications/mimeapps.list (or gnome-mimeapps.list) to
accomplish the same
We modify the mimeapps testcase to check for mimeapps.list having been
created in XDG_CONFIG_HOME instead of XDG_DATA_HOME.
The modification is a net reduction of code (due to less duplication in
bookkeeping). It is also an increase in performance and reduction in
memory consumption (due to simplified data structures). Finally, it
removes the stat-based timestamp checking in favour of the
GFileMonitor-based approach that was already being used in the
implementation of DesktopFileDir (in order to know if we had to rescan
the desktop files themselves).
https://bugzilla.gnome.org/show_bug.cgi?id=728040
We currently assume that setting an application as the default will take
it to the front of the list of supported applications for a given type,
but this is not necessarily true.
Check instead that the application is actually set as default.
https://bugzilla.gnome.org/show_bug.cgi?id=728040
Set XDG_DATA_DIRS to make sure we don't use /usr/share from the
appmonitor test. We will soon throw a warning if we find defaults.list,
so make sure we don't open ourselves up to that if there is one on the
system.
https://bugzilla.gnome.org/show_bug.cgi?id=728040
The desktop file for myapp3 didn't declare support for image/png, but
the testcase expects it to be recommended on the basis of it being the
default app according to defaults.list.
This will not work in the future -- we will only list apps that actually
support the filetype in question, unless they've been explicitly added
as associations.
https://bugzilla.gnome.org/show_bug.cgi?id=728040
The app launch context may just not support startup notification,
in which case, g_app_launch_context_get_startup_notify_id() will
return NULL.
Failure to take this into account leads to criticals like this:
gnome-session[8489]: GLib-CRITICAL: g_variant_new_take_string: assertion 'string != NULL' failed
gnome-session[8489]: GLib-CRITICAL: g_variant_new_variant: assertion 'value != NULL' failed
gnome-session[8489]: GLib-CRITICAL: g_variant_get_type: assertion 'value != NULL' failed
gnome-session[8489]: GLib-CRITICAL: g_variant_type_is_subtype_of: assertion 'g_variant_type_check (type)' failed
https://bugzilla.gnome.org/show_bug.cgi?id=728066
Add G_DBUS_ERROR codes for:
* org.freedesktop.DBus.Error.UnknownObject
* org.freedesktop.DBus.Error.UnknownInterface
* org.freedesktop.DBus.Error.UnknownProperty
* org.freedesktop.DBus.Error.PropertyReadOnly
These were discussed on the dbus mailing list
and introduced in the following libdbus commit:
2c34514620c4b79ea4ec71d1db583379138d01ac
https://bugzilla.gnome.org/show_bug.cgi?id=727900
g_tls_certificate_list_new_from_file() was supposed to ignore non-PEM
content, but it accidentally required that there not be anything after
the last certificate. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=727692
Make sure that the @ sign is inside the authority part before attempting
to parse the userinfo. We do this by checking if the @ sign comes before
any of the possible authority delimiters.
Add unit test to verify parsing of ftp://ftp.gnome.org/start?foo=bar@baz
https://bugzilla.gnome.org/show_bug.cgi?id=726040
Rather than having special code in gsocket.c, handle Winsock errors
along with other Win32 errors in gioerror.c
Also, reference g_win32_error_message() from the
g_io_error_from_win32_error() docs, and update the
g_win32_error_message() docs to clarify that it works with Winsock
error codes too.
Map EPROTONOSUPPORT, ESOCKTNOSUPPORT, EPFNOSUPPORT and EAFNOSUPPORT to
G_IO_ERROR_NOT_SUPPORTED in g_io_error_from_errno(). (GSocket's
socket_io_error_from_errno() already did this with the corresponding
Winsock errors.)
Also map EOPNOTSUPP, which on Linux is the same as ENOTSUP, but may
not be on other platforms.
Also, rewrite the EAGAIN/EWOULDBLOCK section to use the simpler idiom
used by EEXIST/ENOTEMPTY and (now) ENOTSUP/EOPNOTSUPP.
Use #GVariant instead of GVariant.
g_notification_add_button_with_target,
g_notification_set_default_action_and_target:
Replace 'format_string' with 'target_format'.
g_notification_set_default_action_and_target_value:
Remove paragraph that apparently had been accidentally copied from
g_notification_set_default_action_and_target.
https://bugzilla.gnome.org/show_bug.cgi?id=727123
