It is outdated and no longer effectively used. It was originally in
place to prevent rebuilding generated files (from a tarball) if the
right build tools (awk, Perl, indent) were not available. However, we no
longer use indent, we have hard-required awk for a while, and the only
places the @REBUILD@ substitution was still used were for
glib-genmarshal, which has recently been rewritten in Python (so no
longer depends on whether Perl is available).
Drop the whole lot.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=694723
After the build system rework in commit f9eb9e testgobject fell through
the cracks and was not built since then.
Re-enable it, even if it is currently failing due to commit 31fde56.
(Tweaked by Philip Withnall to add meson.build support.)
https://bugzilla.gnome.org/show_bug.cgi?id=701156
We don't need to run binaries we just built in order to successfully
build GLib and friends any more.
Since commit b74e2a7, we don't need to run glib-genmarshal when building
GIO; since commit f9eb9eed, all our tests (including the ones that do
need to run binaries we just built) are only built when running "make
check", instead of unconditionally at every build.
This means that we don't need to check for existing, native binaries
when cross-compiling, and fail the configuration step if they are not
found — which also means that you don't need to natively build GLib for
your toolchain, in order to cross-compile GLib.
We can also use the cross-compilation conditional, and skip those tests
that require a binary we just built in order to build.
https://bugzilla.gnome.org/show_bug.cgi?id=753745
This commit adds a test to ensure that during a signal emission, if
a signal handler gets disconnected, it won't be run, even if it would
have run before the disconnection.
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
testgobject.c and timeloop-closure.c are the only two tests in the
toplevel tests/ directory that depend on gobject, so move them to
tests/gobject/ along with the other gobject tests.
Both of these were in noinst_PROGRAMS and not TESTS, so keep them that
way when we move them.
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
For some reason, even though the tests are linked against libgobject.la
and libgobject.la mentions libglib.la as a dependency, the tests are
running against the system glib instead of the in-tree one.
Adding the libglib.la file as an explicit LDFLAG fixes it.
These are basic performance test for a couple of basic gobject
primitives:
* construction of simple objects. Simple is a bare gobject derived
class with no properties, signals or interfaces.
* construction of complex objects. Complex is a gobject subclass
with construct properties, normal properties, signals, and
implements an interface.
* run-time type check of complex objects
* signal emissions
Lots of care is taken to try to make the results reproducible. Each
test is run for multible "rounds", where we try to make each round be
"not too short" in order to be significant wrt timer accuracy, but
also "not to long" to make the probability of some other random event
happening on the system (interrupts, other process scheduled, etc)
during the round less likely.
The current target round time is 4 msecs, which was picked without
rigour, but seems small wrt e.g. scheduler time.
For each test we then run the calculated round size for 60 seconds,
and then report the performance based on the minimal time of one
round. The model here is that any random stuff that happens during a
round can only slow it down, there is nothing that can make it go
faster, so the minimal time is the best estimate of how fast one round
goes.
The result is not ideal, even on a "idle" system the results vary
from round to round, but the variation seems to be less than 1%.
So, any performance difference reported by this test over 1% is
probably statistically significant.
Additionally the tests can be run with or without threads being
initialized. The script tests/gobject/run-performance.sh makes
it easy to produce a performance report for the current checkout.
https://bugzilla.gnome.org/show_bug.cgi?id=557100
2007-11-21 21:06:47 Tim Janik <timj@imendio.com>
* Makefile.decl: initialize automake variables EXTRA_DIST and
TEST_PROGS for unconditional appending via += in other makefiles.
define recursive test targets: test, test-report, perf-report,
full-report, as described here:
http://mail.gnome.org/archives/gtk-devel-list/2007-November/msg00000.html
* Makefile.am:
* build/win32/vs8/Makefile.am, build/win32/dirent/Makefile.am:
* build/win32/Makefile.am, build/Makefile.am:
* docs/Makefile.am, docs/reference/Makefile.am:
* docs/reference/glib/Makefile.am, docs/reference/gobject/Makefile.am:
* gmodule/Makefile.am, tests/Makefile.am:
* tests/refcount/Makefile.am, tests/gobject/Makefile.am:
* glib/update-pcre/Makefile.am, glib/libcharset/Makefile.am:
* glib/tests/Makefile.am, glib/pcre/Makefile.am:
* glib/gnulib/Makefile.am, gobject/Makefile.am, m4macros/Makefile.am:
* gthread/Makefile.am, glib/Makefile.am:
include $(top_srcdir)/Makefile.decl, adapted EXTRA_DIST assignments.
* glib/tests/Makefile.am: removed example testing rules.
* glib/tests/testing.c: conditionalized performance and slow tests.
* glib/gtestutils.h:
* glib/gtestutils.c: work around g_test_config_vars not changing its
exported value after value assignments, aparently due to symbol aliases.
* glib/gtester.c: fixed off-by-one error which produced junk in logs.
* configure.in: check for python >= 2.4 and provide $PYTHON for scripts.
svn path=/trunk/; revision=5914
Wed Aug 16 13:59:07 2006 Tim Janik <timj@gtk.org>
* tests/gobject/Makefile.am:
* tests/gobject/singleton.c: added test program which demonstrates
and checks singleton construction.
2005-08-09 Matthias Clasen <mclasen@redhat.com>
* tests/gobject/Makefile.am (test_programs): Add it here.
* tests/gobject/gvalue-test.c: Beginning of a test suite
for GValue.
2005-05-05 Owen Taylor <otaylor@redhat.com>
* gobject.[ch] gobject.symbols: Add
g_object_add/remove_toggle_ref() functions to get notification
when a reference count is the last remaining reference; this
enables better memory management for language bindings.
(http://mail.gnome.org/archives/gtk-devel-list/2005-April/msg00095.html)
2005-05-05 Owen Taylor <otaylor@redhat.com>
* glib/gdataset.[ch] glib/gdatasetprivate.h: Add
g_datalist_set/unset_flags(), g_datalist_get_flags() functions
to squeeze some bits into a GDataSet... this is needed for
efficient implementation of toggle references in GObject.
* tests/gobject/references.c tests/gobject/Makefile.am:
Add a test case for weak and toggle references.
* glib/gfileutils.[ch]: Rename g_file_replace() back
to g_file_set_contents().
* glib/glib.symbols: Update.
2005-05-05 Owen Taylor <otaylor@redhat.com>
* glib/Makefile.am glib/glib-sections.txt gobject/gobject-sections.txt:
Update
* gobject/tmpl/objects.sgml: Document toggle-references.
2003-10-24 Tor Lillqvist <tml@iki.fi>
* configure.in: Force shared library (DLL) only on Windows.
(I don't think that is controversial?) Remove unnecessary
AC_LIBTOOL_WIN32_DLL. Don't use -D_REENTRANT on
Win32, it is not used by mingw or MSVC headers.
* config.h.win32.in
* glibconfig.h.win32.in: Match what configure produces.
* glib/gconvert.c
* glib/gutils.c: Mark a couple of functions and variables that
aren't public as static.
* glib/gnulib/g-gnulib.h: Undef HAVE_SNPRINTF before (re)defining
it potentially differently, to silence compiler.
* glib/glib.def: Add some missing entries.
* tests/gobject/Makefile.am (LDADD): Reorder, put libgobject after
libtestgobject.
* tests/gobject/ifaceproperties.c (main): NULL-terminate arg list
to g_object_set() and _get().
Thu Oct 23 12:38:24 2003 Owen Taylor <otaylor@redhat.com>
* === Released 2.3.0 ===
* tests/gobject/Makefile.am (dist-hook): Remove
and extra backslash.
* tests/gobject/Makefile.am (EXTRA_DIST): Add
testmarshal.list.
* glib/Makefile.am (libglib_2_0_la_SOURCES): Add
missing gunicode-private.h.
* tests/testglib.c (main): Fix a warning.
* tests/gobject/ifaceinherit.c: Remove check that
wasn't supposed to work (adding an interface already
added to the derived class to the base class),
fix a bug.
Thu Oct 2 01:15:46 2003 Owen Taylor <otaylor@redhat.com>
* tests/gobject/ifacecheck.c: Test case for
g_type_add_interface_check().
* tests/gobject/ifaceinit.c: Add #undef G_DISABLE_ASSERT.
Thu Oct 2 00:02:55 2003 Owen Taylor <otaylor@redhat.com>
* tests/gobject/Makefile.am test/gobject/ifaceinherit.c:
Tests of interface inheritance and overriding.
Thu Sep 25 15:43:08 2003 Owen Taylor <otaylor@redhat.com>
* tests/gobject/testmodule.[ch] test/gobject/Makefile.am:
Dummy dynamic type module for testing type plugin code
and dynamic types.
* test/gobject/defaultiface.c: Test of g_default_interface_ref,
etc.
