This allows referencig them from more than single .c file.
Implementation moved without changes
from gdbusaddress.c to gdbusprivate.c
g_win32_run_session_bus signature also kept, so ABI unchanged.
Closes: https://gitlab.gnome.org/GNOME/glib/issues/1566
Short names were used in win32 implementation to allow launching
on installations where full path to libgio-2.0-0.dll contain spaces.
However, short names are optional on windows: so if they were disabled
that method fails - see issue linked above.
Since rundll32 doesn't support neither spaces, nor quotes in cmdline
this patch changes rundll32 argument to just .\gio-dll-name.dll
and uses the entire path directory containing gio dll as rundll32
current directory.
Added comments informing about potential subtleties discovered during
writing test for gdbusaddress on win32.
There are not known to have real-world user-visible effect,
so by now I'm only adding comments without creating issues.
Previously, calling:
g_dbus_is_supported_address ("some-imaginary-transport:", NULL)
correctly returned FALSE; but calling:
g_dbus_is_supported_address ("some-imaginary-transport:", &error)
crashed with:
GLib-GIO:ERROR:../gio/gdbusaddress.c:434:g_dbus_is_supported_address:
assertion failed: (ret || (!ret && (error == NULL || *error != NULL)))
This was because, if the address component did not start with a known
transport, no error was set. Fix this, reusing an error string used by
the corresponding else branch in g_dbus_address_connect(), and adjust
the test to pass both NULL and non-NULL GError **s to this function in
every test case. This case:
g_assert (!g_dbus_is_supported_address ("some-imaginary-transport:foo=bar;unix:path=/this/is/valid", NULL));
would have caught this bug with a non-NULL GError **.
See the discussion in the bug report: with proxy support enabled, a
proxy resolver is created. Doing that will load all the GIO modules, and
typically at least one of them will try to use GDBus during
initialisation, which will cause a deadlock.
Using a TCP address with GDBusAddress is still supported, but accessing
it over a proxy is not.
Document this.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792499
This will fix a few broken links in the documentation, and shut up a
load of gtk-doc warnings (but certainly not all of them).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790015
Prevent the situation where errno is set by function A, then function B
is called (which is typically _(), but could be anything else) and it
overwrites errno, then errno is checked by the caller.
errno is a horrific API, and we need to be careful to save its value as
soon as a function call (which might set it) returns. i.e. Follow the
pattern:
int errsv, ret;
ret = some_call_which_might_set_errno ();
errsv = errno;
if (ret < 0)
puts (strerror (errsv));
This patch implements that pattern throughout GLib. There might be a few
places in the test code which still use errno directly. They should be
ported as necessary. It doesn’t modify all the call sites like this:
if (some_call_which_might_set_errno () && errno == ESOMETHING)
since the refactoring involved is probably more harmful than beneficial
there. It does, however, refactor other call sites regardless of whether
they were originally buggy.
https://bugzilla.gnome.org/show_bug.cgi?id=785577
If we have an input parameter (or return value) we need to use (nullable).
However, if it is an (inout) or (out) parameter, (optional) is sufficient.
It looks like (nullable) could be used for everything according to the
Annotation documentation, but (optional) is more specific.
The two known use-cases for autolaunching are:
* X-forwarding: "ssh -Y myhost myapp" resulting in a
session bus on myhost but an X server on the original host
* Legacy desktop environments on OSs without D-Bus integration:
e.g. running a single GNOME or KDE app under fvwm or something,
without a session dbus-daemon being started by either systemd,
gnome-session, or OS integration scripts analogous to Debian's
/etc/X11/Xsession.d/75dbus_dbus-launch
In either case, an X11 DISPLAY is also needed.
"dbus-launch --autolaunch" doesn't do anything useful when unable
to connect to an X11 display; this has been the case since the feature
was added in 2006, and is useful to avoid "split brain" situations in
which two processes that ought to be part of the same session end up
on separate session buses. Since dbus commit 407c111 in 2011,
libdbus hasn't even attempted to run "dbus-launch --autolaunch"
unless getenv("DISPLAY") returns non-null in the parent: this avoids
doing a relatively complicated fork-and-exec that is clearly not
going to lead to success. This commit gives GDBus the same policy.
This change was originally made to work around a race condition in
subprocess spawning (Debian bug #737380, GNOME bug #711090) but
it seems valid in its own right.
In my opinion as D-Bus maintainer, "dbus-launch --autolaunch" should
be considered to be an X11 feature, and any future D-Bus enhancements
(e.g. kdbus) or successors for X11 (e.g. Wayland, Mir) should obtain
a session bus address by other means - either a session manager
such as "systemd --user", gnome-session or Upstart, or a wrapper
for the user session like dbus-run-session(1).
Related to dbus bug <https://bugs.freedesktop.org/show_bug.cgi?id=19997>.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=723506
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=737380
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Even though GetStartupInfo() in g_win32_run_session_bus() would
tell us that STARTF_FORCEONFEEDBACK flag is not set, it still
affects the rundll32 process for some reason.
This means that Windows WM changes mouse cursor to IDC_APPSTARTING for
a few seconds when rundll32 runs g_win32_run_session_bus(). Since
g_win32_run_session_bus() never satisfies the conditions set by
STARTF_FORCEONFEEDBACK, the busy cursor only goes away after a
timeout.
Fix this by explicitly running GetMessage(). To ensure that GetMessage()
doesn't block, post a quit message immediately before calling it.
https://bugzilla.gnome.org/show_bug.cgi?id=760694
This is the right thing to do for the "a session is a user-session"
model implemented in dbus 1.9.14, which is described in
<http://lists.freedesktop.org/archives/dbus/2015-January/016522.html>.
It also resembles sd-bus' behaviour, although sd-bus will only try
kdbus and XDG_RUNTIME_DIR/bus, and never runs dbus-launch.
On systems following the more traditional "a session is a login-session"
model, X_R_D/bus won't exist, so it is harmless to check for it before
falling back to X11 autolaunching. Again, this matches the behaviour
of current libdbus and sd-bus versions.
Now that we do this, g_test_dbus_unset() needs to clear XDG_RUNTIME_DIR
as well as everything else.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=747941
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
This only alters what happens if we specifically connect to
"autolaunch:", for instance via "DBUS_SESSION_BUS_ADDRESS=autolaunch:".
We will still potentially try other platform-specific things if
DBUS_SESSION_BUS_ADDRESS is unset. There are currently no other
platform-specific things, so there is no practical difference yet,
but I'm about to add a more-preferred fallback path before autolaunch.
This matches libdbus' behaviour and the D-Bus Specification, in which
the autolaunch: transport specifically means X11 autolaunch
(as implemented by "dbus-launch --autolaunch") on Unix, or a
shared-memory-based protocol on Windows. Other platform-specific
transports or default/fallback modes, including launchd on Mac OS X
and XDG_RUNTIME_DIR/bus on Unix, are not part of "autolaunch:".
It's rather unfortunate that the same name means two different
platform-specific mechanisms, specific to different platforms -
if they were added today I'd call them x11: and windows-shm: or
something - but it's been like this since 2007 so it's too late now.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=747941
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Since all element markup is now gone from the doc comments,
we can turn off the gtk-doc sgml mode, which means that from
now on, docbook markup is no longer allowed in doc comments.
To make this possible, we have to replace all remaining
entities in doc comments by their replacement text, & -> &
and so on.
The RunDLL command call during get_session_address_dbus_launch() was
expecting _g_win32_run_session_bus@16 and g_win32_run_session_bus
on Win32 and Win64 respectively at least when GLib is compiled with MSVC,
not g_win32_run_session_bus@16, which caused annoying RunDLL error dialogue
boxes to show up during the use of GtkApplication (such as when running
gtk3-demo-application on Windows), prevented GtkApplication items from
being run for more than one time during the lifespan of the program,
and this also interfered with some GTK+ tests, causing them to fail.
Update accordingly to address the issue.
Back in the far-off twentieth century, it was normal on unix
workstations for U+0060 GRAVE ACCENT to be drawn as "‛" and for U+0027
APOSTROPHE to be drawn as "’". This led to the convention of using
them as poor-man's ‛smart quotes’ in ASCII-only text.
However, "'" is now universally drawn as a vertical line, and "`" at a
45-degree angle, making them an `odd couple' when used together.
Unfortunately, there are lots of very old strings in glib, and also
lots of new strings in which people have kept up the old tradition,
perhaps entirely unaware that it used to not look stupid.
Fix this by just using 'dumb quotes' everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=700746
This is a GLib reimplementation of dbus_address_escape_value().
It's useful if you want to construct a D-Bus address from pieces:
for instance, if you have a listening Unix socket whose path is known,
and you want to connect a D-Bus peer to it.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=693673
Reviewed-by: Colin Walters <walters@verbum.org>
[amended to add Since: 2.36 as per review]
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Very many testcases, some GLib tools (resource compiler, etc) and
GApplication were calling g_type_init().
Remove those uses, as they are no longer required.
https://bugzilla.gnome.org/show_bug.cgi?id=686161
Some programs attempt to use libglib (or even libgio) when setuid.
For a long time, GTK+ simply aborted if launched in this
configuration, but we never had a real policy for GLib.
I'm not sure whether we should advertise such support. However, given
that there are real-world programs that do this currently, we can make
them safer with not too much effort.
Better to fix a problem caused by an interaction between two
components in *both* places if possible.
This patch adds a private function g_check_setuid() which is used to
first ensure we don't run an external dbus-launch binary if
DBUS_SESSION_BUS_ADDRESS isn't set.
Second, we also ensure the local VFS is used in this case. The
gdaemonvfs extension point will end up talking to the session bus
which is typically undesirable in a setuid context.
Implementing g_check_setuid() is interesting - whether or not we're
running in a privilege-escalated path is operating system specific.
Note that GTK+'s code to check euid versus uid worked historically on
Unix, more modern systems have filesystem capabilities and SELinux
domain transitions, neither of which are captured by the uid
comparison.
On Linux/glibc, the way this works is that the kernel sets an
AT_SECURE flag in the ELF auxiliary vector, and glibc looks for it on
startup. If found, then glibc sets a public-but-undocumented
__libc_enable_secure variable which we can use. Unfortunately, while
it *previously* worked to check this variable, a combination of newer
binutils and RPM break it:
http://www.openwall.com/lists/owl-dev/2012/08/14/1
So for now on Linux/glibc, we fall back to the historical Unix version
until we get glibc fixed.
On some BSD variants, there is a issetugid() function. On other Unix
variants, we fall back to what GTK+ has been doing.
Reported-By: Sebastian Krahmer <krahmer@suse.de>
Signed-off-by: Colin Walters <walters@verbum.org>
Many (if not "almost all") programs that spawn other programs via
g_spawn_sync() or the like simply want to check whether or not the
child exited successfully, but doing so requires use of
platform-specific functionality and there's actually a fair amount of
boilerplate involved.
This new API will help drain a *lot* of mostly duplicated code in
GNOME, from gnome-session to gdm. And we can see that some bits even
inside GLib were doing it wrong; for example checking the exit status
on Unix, but ignoring it on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=679691
Call g_simple_async_result_set_check_cancellable() after all
GSimpleAsyncResult creation in order to take advantage of the new
reliable cancellation feature.
The guarantee of reliable cancellation fixes a bug in dbusmenu (which
was already assuming that cancellation was reliable). See this bug:
https://bugs.launchpad.net/ubuntu/+source/libdbusmenu/+bug/953562https://bugzilla.gnome.org/show_bug.cgi?id=672013
Signed-off-by: David Zeuthen <davidz@redhat.com>
Until after we include the glib stuff, so that we have G_OS_UNIX
defined.
For some reason <stdlib.h> pulls in <sys/wait.h> on Fedora so this
wasn't a problem, but many others have reported the issue.
