Port all existing calls in GLib to the new API so that they can receive
more detailed error information (although none of them actually make use
of it at the moment).
This also serves to test the new API better through use.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #203
No behavior changes. Just reindent the existing code to avoid a GCC
warning spam.
I considered changing the code to not run fflush() on every iteration of
the loop, but I doubt it matters much, so I left it be.
gjs has some situations where it's not always aware of the @data that
was passed into g_object_add_toggle_ref, so allow passing %NULL to
just match on @notify.
Rebased and updated by Nitin Wartkar
Closes#817
tests/unicode-collate.c: In function ‘main’:
tests/unicode-collate.c:77:11: error: comparison of integer expressions of different signedness: ‘int’ and ‘guint’ {aka ‘unsigned int’}
77 | if (argc > i)
| ^
tests/timeloop.c: In function ‘read_all’:
tests/timeloop.c:41:21: error: comparison of integer expressions of different signedness: ‘gsize’ {aka ‘long unsigned int’} and ‘int’
41 | while (bytes_read < len)
| ^
tests/timeloop.c: In function ‘write_all’:
tests/timeloop.c:65:24: error: comparison of integer expressions of different signedness: ‘gsize’ {aka ‘long unsigned int’} and ‘int’
65 | while (bytes_written < len)
| ^
tests/slice-threadinit.c: In function ‘main’:
tests/slice-threadinit.c:77:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
77 | for (j = 0; j < N_MAGAZINE_PROBES; j++)
| ^
tests/slice-threadinit.c:108:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
108 | for (j = 0; j < N_MAGAZINE_PROBES; j++)
| ^
tests/slice-threadinit.c:113:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
113 | for (j = 0; j < N_MAGAZINE_PROBES; j++)
| ^
tests/slice-threadinit.c:131:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
131 | for (j = 0; j < N_MAGAZINE_PROBES; j++)
| ^
tests/slice-threadinit.c:139:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
139 | for (j = 0; j < N_MAGAZINE_PROBES; j++)
| ^
tests/slice-threadinit.c:161:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
161 | for (j = 0; j < N_MAGAZINE_PROBES; j++)
| ^
I did it wrong last time... my bad...
tests/gobject/performance-threaded.c: In function ‘main’:
tests/gobject/performance-threaded.c:361:21: warning: comparison of integer expressions of different signedness: ‘gsize’ {aka ‘long unsigned int’} and ‘int’
361 | for (k = 1; k < argc; k++)
| ^
tests/mainloop-test.c: In function ‘cleanup_crawlers’:
tests/mainloop-test.c:358:15: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
358 | for (i=0; i < crawler_array->len; i++)
| ^
tests/dirname-test.c: In function ‘main’:
tests/dirname-test.c:105:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
105 | for (i = 0; i < n_dirname_checks; i++)
| ^
tests/gobject/performance-threaded.c: In function ‘run_test’:
tests/gobject/performance-threaded.c:302:19: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘int’
302 | for (i = 0; i < n_threads; i++) {
| ^
tests/gobject/performance-threaded.c:308:19: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘int’
308 | for (i = 0; i < n_threads; i++) {
| ^
tests/gobject/performance-threaded.c: In function ‘find_test’:
tests/gobject/performance-threaded.c:324:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
324 | for (i = 0; i < G_N_ELEMENTS (tests); i++)
| ^
tests/gobject/performance-threaded.c: In function ‘main’:
tests/gobject/performance-threaded.c:351:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
351 | for (i = 0; i < G_N_ELEMENTS (tests); i++)
| ^
tests/gobject/performance-threaded.c:369:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
369 | for (i = 0; i < G_N_ELEMENTS (tests); i++)
| ^
tests/gobject/timeloop-closure.c: In function ‘read_all’:
tests/gobject/timeloop-closure.c:42:21: error: comparison of integer expressions of different signedness: ‘gsize’ {aka ‘long unsigned int’} and ‘int’
42 | while (bytes_read < len)
| ^
tests/gobject/timeloop-closure.c: In function ‘write_all’:
tests/gobject/timeloop-closure.c:66:24: error: comparison of integer expressions of different signedness: ‘gsize’ {aka ‘long unsigned int’} and ‘int’
66 | while (bytes_written < len)
| ^
tests/refcount/objects.c: In function ‘main’:
tests/refcount/objects.c:133:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘const unsigned int’}
133 | for (i = 0; i < n_threads; i++) {
| ^
tests/refcount/objects.c:149:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘unsigned int’
149 | for (i = 0; i < 2 * n_threads; i++) {
| ^
tests/gobject/performance.c: In function ‘find_test’:
tests/gobject/performance.c:1019:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
1019 | for (i = 0; i < G_N_ELEMENTS (tests); i++)
| ^
tests/gobject/performance.c: In function ‘main’:
tests/gobject/performance.c:1054:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
1054 | for (i = 0; i < G_N_ELEMENTS (tests); i++)
| ^
tests/onceinit.c: In function ‘stress_concurrent_initializers’:
tests/onceinit.c:267:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
267 | for (i = 0; i < G_N_ELEMENTS (initializers); i++)
| ^
tests/gobject/defaultiface.c: In function ‘test_dynamic_iface_register’:
tests/gobject/defaultiface.c:126:5: error: missing initializer for field ‘class_data’ of ‘GTypeInfo’ {aka ‘const struct _GTypeInfo’}
126 | };
| ^
tests/gobject/testmodule.c: In function ‘test_module_get_type’:
tests/gobject/testmodule.c:34:1: error: missing initializer for field ‘value_table’ of ‘GTypeInfo’ {aka ‘const struct _GTypeInfo’}
34 | DEFINE_TYPE (TestModule, test_module,
| ^~~~~~~~~~~
tests/gobject/defaultiface.c: In function ‘test_static_iface_get_type’:
tests/gobject/defaultiface.c:58:1: error: missing initializer for field ‘class_finalize’ of ‘GTypeInfo’ {aka ‘const struct _GTypeInfo’}
58 | DEFINE_IFACE (TestStaticIface, test_static_iface,
| ^~~~~~~~~~~~
tests/gobject/testgobject.c: In function ‘test_iface_get_type’:
tests/gobject/testgobject.c:53:7: error: missing initializer for field ‘class_init’ of ‘GTypeInfo’ {aka ‘const struct _GTypeInfo’}
53 | };
| ^
tests/gobject/testgobject.c: In function ‘test_object_get_type’:
tests/gobject/testgobject.c:182:7: error: missing initializer for field ‘value_table’ of ‘GTypeInfo’ {aka ‘const struct _GTypeInfo’}
182 | };
| ^
tests/gobject/testgobject.c: In function ‘derived_object_get_type’:
tests/gobject/testgobject.c:349:7: error: missing initializer for field ‘value_table’ of ‘GTypeInfo’ {aka ‘const struct _GTypeInfo’}
349 | };
| ^
And drop the `volatile` qualifier from the variables, as that doesn’t
help with thread safety.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
These variables were already (correctly) accessed atomically. The
`volatile` qualifier doesn’t help with that.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
This commit is the unmodified results of running
```
black $(git ls-files '*.py')
```
with black version 19.10b0. See #2046.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
"lower bound" and "upper bound" operations have been recently added to
GTree.
Let's add some tests for them where other GTree tests live.
Since adding keys in-order doesn't exercise the GTree insertion code very
well let's make sure they are inserted in a random order instead.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
This was mostly machine generated with the following command:
```
codespell \
--builtin clear,rare,usage \
--skip './po/*' --skip './.git/*' --skip './NEWS*' \
--write-changes .
```
using the latest git version of `codespell` as per [these
instructions](https://github.com/codespell-project/codespell#user-content-updating).
Then I manually checked each change using `git add -p`, made a few
manual fixups and dropped a load of incorrect changes.
There are still some outdated or loaded terms used in GLib, mostly to do
with git branch terminology. They will need to be changed later as part
of a wider migration of git terminology.
If I’ve missed anything, please file an issue!
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Some editors automatically remove trailing blank lines, or
automatically add a trailing newline to avoid having a trailing
non-blank line that is not terminated by a newline. To avoid unrelated
whitespace changes when users of such editors contribute to GLib,
let's pre-emptively normalize all files.
Unlike more intrusive whitespace normalization like removing trailing
whitespace from each line, this seems unlikely to cause significant
issues with cherry-picking changes to stable branches.
Implemented by:
find . -name '*.[ch]' -print0 | \
xargs -0 perl -0777 -p -i -e 's/\n+\z//g; s/\z/\n/g'
Signed-off-by: Simon McVittie <smcv@collabora.com>
Using commands:
```
glib/gen-unicode-tables.pl -both 13.0.0 path/to/UCD
tests/gen-casefold-txt.py 13.0.0 path/to/UCD/CaseFolding.txt \
> tests/casefold.txt
tests/gen-casemap-txt.py 13.0.0 path/to/UCD/UnicodeData.txt \
path/to/UCD/SpecialCasing.txt > tests/casemap.txt
```
Using UCD release https://www.unicode.org/Public/zipped/13.0.0/UCD.zip
With some manual additions to `GUnicodeScript` for the 4 new scripts
added in 13.0, using the first assigned character in each block in
`glib/tests/unicode.c`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Most of these scripts can probably just be deleted (see issue #2045),
but for now it was easier to just mechanically fix the shellcheck
warnings in them, rather than think about whether we actually needed the
script.
Fixes done using shellcheck 0.7.0 with default options. I haven’t tested
any of the changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It looks like `continue_timeout` should be returned here, rather than
being set and never read. Spotted by `scan-build`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In many places the pattern
static gboolean warned_once = FALSE;
if (!warned_once)
{
g_warning ("This and that");
warned_once = TRUE;
}
is used to not spam the same warning message over and over again. Add a
helper in glib for this, allowing the above statement to be changed to
g_warning_once ("This and that");
When using the mingw printf shims for C99 compat the msvc format specifiers don't work
and the build fails.
Ideally we would use glib functions which abstract this away, but in the error handler context
we shouldn't call back into glib. And for scanf we don't have a glib wrapper.
Instead call the "secure" versions provided by the win32 API (_snprintf_s/fprintf_s/sscanf_s)
which mingw doesn't replace.
On Visual Studio, Meson builds modules as xxxx.dll, not libxxxx.dll when
xxxx is specified as the name for the shared_module() build directive.
This means that in the test programs if we expect for libxxxx for the
module name, the test will fail as there is no libxxxx.dll but there is
xxxx.dll. This makes the test program look for the module files
correctly.
This code uses, or tests, deprecated functions, types or macros; so
needs to be compiled with deprecation warnings disabled.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
