This means the output (including lists of filenames) does not depend on
the order of the input files, which may matter if this tool is invoked
with a glob or some other mechanism that doesn't guarantee an order.
Previously, method and signal arguments were sorted by name, which
(assuming you don't happen to give your arguments
lexicographically-ordered names) means the generated signatures were
incorrect when there is more than 1 argument.
While sorting the methods and signals themselves (and properties, and
annotations on all these) is fine, it's easiest to not sort anything.
Since 1217b1bc4f, LICENSE_STR has taken two
parameters, not one. Without this change, running either mode fails
with a traceback like:
Traceback (most recent call last):
File "../gdbus-codegen", line 55, in <module>
sys.exit(codegen_main.codegen_main())
File ".../codegen_main.py", line 294, in codegen_main
gen.generate()
File ".../codegen.py", line 896, in generate
self.generate_body_preamble()
File ".../codegen.py", line 682, in generate_body_preamble
self.outfile.write(LICENSE_STR.format(config.VERSION))
IndexError: tuple index out of range
8916874ee6, which introduced these flags,
was actually merged after that commit, but I assume it was written
beforehand.
If a D-Bus interface was annotated with o.fd.DBus.Deprecated, then the
corresponding GObject property, in the common GInterface implemented
by the generated GDBusObjectProxies and GDBusObjectSkeletons, to
access the generated code for the D-Bus interface was not being marked
with G_PARAM_DEPRECATED, even though the gtk-doc snippet had the
'Deprecated: ' tag.
G_PARAM_DEPRECATED is older than gdbus-codegen, 2.26 and 2.30
respectively, hence it can be used unconditionally.
https://gitlab.gnome.org/GNOME/glib/merge_requests/485
If a D-Bus interface has a property that's annotated with
o.fd.DBus.Deprecated, then the corresponding GObject property was not
being marked with G_PARAM_DEPRECATED, even though the gtk-doc snippet
had the 'Deprecated: ' tag.
G_PARAM_DEPRECATED is older than gdbus-codegen, 2.26 and 2.30
respectively, hence it can be used unconditionally.
https://gitlab.gnome.org/GNOME/glib/merge_requests/485
None of these files starts with a #! line, and they are not native
binary executables, so if a user attempts to execute them as a program,
Unix shells will run them as /bin/sh scripts. This is not going to end
well, since none of them are shell scripts (the gio bash completion
is for bash, which is not a lowest-common-denominator POSIX shell, and
in any case is designed to be sourced rather than executed).
Fixes: #1539
Signed-off-by: Simon McVittie <smcv@collabora.com>
The existing code was generating code with undefined results that modern compilers warn about:
accounts-generated.c:204:23: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
(GDBusArgInfo **) &_accounts_accounts_method_info_list_cached_users_OUT_ARG_pointers,
The new python module, added with 0.46, works with Python 2 and 3 and
allows to pass a path for the interpreter to use, if the need arises.
Previously the meson build set PYTHON, used in the shebang line of
the scripts installed by glib, to the full path of the interpreter.
The new meson module doesn't expose that atm, but we should set it to
a executable name anyway, and not a full path.
Several of our tools are installed and are used by other projects to
generate code. However, there is no 'install' when projects use glib
as a subproject.
We need some way for glib to 'provide' these tools so that when some
project uses glib as a subproject, find_program('glib-mkenums') will
transparently return the glib-mkenums we just built.
Starting from Meson 0.46, this can be done with the
`meson.override_find_program()` function.
As a bonus, the Meson GNOME module will also use these
'overriden'/'provided' programs instead of looking for them in PATH.
PEP8 says that:
"Comparisons to singletons like None should always be done with is or
is not, never the equality operators."
glib uses a mix of "== None" and "is None". This patch changes all
cases to the latter.
Since it’s deprecated in favour of positional arguments, including it in
the help output is confusing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
These generate basic .c and .h files containing the GDBusInterfaceInfo
for a D-Bus introspection XML file, but no other code (no skeletons,
proxies, GObjects, etc.).
This is useful for projects who want to describe their D-Bus interfaces
using introspection XML, but who wish to implement the interfaces
manually (for various reasons, typically because the skeletons generated
by gdbus-codegen are too simplistic and limiting). Previously, these
projects would have had to write the GDBusInterfaceInfo manually, which
is painstaking and error-prone.
The new --interface-info-[body|header] options are very similar to
--[body|header], but mutually exclusive with them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
Recursive annotations do seem to be supported, so we should support them
properly in the type system representation. This currently introduces no
behavioural changes, but will be used in upcoming commits.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
This makes it a bit easier for debugging which files were generated from
which introspection XML.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=650875
g_variant_get_objpathv() doesn’t exist. The code actually meant
g_variant_get_objv().
This fixes a leak with `ao`-type properties in generated code.
Previously they wouldn’t be freed; now the container is (correctly)
freed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=770335
In cases where gdbus-codegen is used only for docbook generation,
the execution stops with the following error message:
`Using --header or --body requires --output`
This is because it was assumed that, in addition to the docbook
generation, the header or source code were always generated.
This patch fixes this, and the header or source code generation
is not mandatory, so the docbook can be generated separately.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
gdbus-codegen's options only allow a simultaneous header and source
code generation.
A `--header` and `--body` options have been added along with the
`--output` option which allow separate C header and code
generation.
These options cannot be used in addition to the old options such
as `--generate-c-code`, `--generate-docbook` or
`--output-directory`.
These options have also been added to gdbus-codegen's documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The `outdir` and `docbook` parameters are passed to the
`DocbookCodeGenerator` constructor, but these parameters are only
used at docbook generation, which is optional.
The parameters have been removed from the class creation and added
to the `generate` method, where they are actually being used.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The class that generated both C header and code has been split into
two classes. These clases are now specialized on creating the header
or the body code.
All parameters that do not belong to each class have also been
deleted, so only the necessary parameters still remain. These also
includes the header and code file descriptors, leaving only the
corresponding file descriptor necessary for each class.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The generation of the C header and code preambles have been split
in order to be able to generate both files separately in the future.
The functions for generating preambles and postambles have also been
renamed following the function names used in the glib-genmarshal
rewrite, so that they stay consistent.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The #pragma once is widely supported preprocessor directive that can
be used instead of include guards.
This adds support for using optionally this directive instead of
include guards.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The optparse module is deprecated since version 2.7 and the
development continues with the argparse.
The code has been moved from optparse to argparse when parsing
command-line options. This has also led to the deprecation of the
`--xml-files`, and positional arguments should be used instead.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
`glib-genmarshal` and `glib-mkenums` use a `Color` class which
implements a number of print_* methods to print colored messages
to the standard error output.
In order to be consistent with those programs' output,
`gdbus-codegen` has also started using that same class and methods.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The license string which is embedded in the C header and body
preambles has been moved to a global variable. This way it can be
reused in both sections.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
Putting a <!-- --> in plural<!-- -->s was an old hack used to fix
linking the symbol with gtk-doc when gtk-doc didn’t know about plural
forms. gtk-doc does now know about plural forms, so the hack can be
removed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When using gdbus-codegen to produce generated code for a method with
an out parameter with a signature like 'as', make sure to include
an "(array)" annotation for that parameter.
(Reworked by Philip Withnall to improve code formatting.)
https://bugzilla.gnome.org/show_bug.cgi?id=741167
This assumption breaks when, for instance:
* Called as /bin/gdbus-codegen
* Installed on Windows in a directory that is not `bin/`
For such cases, we cannot make any assumptions about the directory
structure, and must hard-code the datadir.
https://bugzilla.gnome.org/show_bug.cgi?id=786785
Disable gio tests on Windows, fix .gitignore to not ignore
config.h.meson, and add more things to it.
Rename the library file naming and versioning to match what Autotools
outputs, e.g., libglib-2.0.so.0.5000.2 on Linux, libglib-2.0-0.dll and
glib-2.0-0.dll on Windows with MSVC.
Several more tiny fixes, more executables built and installed, install
pkg-config and m4 files, fix building of gobject tests.
Changes to gdbus-codegen to support out-of-tree builds without
environment variables set (which you can't in Meson). We now add the
build directory to the Python module search path.
In addition to code, gdbus-codegen can also generate docbook
documentation for DBus interfaces. There's no good reason why
the newly added --output-directory option shouldn't apply to
those generated files as well.
https://bugzilla.gnome.org/show_bug.cgi?id=783201
It's unnecessary, and only adds visual noise; we have been fairly
inconsistent in the past, but the semi-colon-less version clearly
dominates in the code base.
https://bugzilla.gnome.org/show_bug.cgi?id=669355
