Commit Graph

82 Commits

Author SHA1 Message Date
Michael Catanzaro
16cdda5d35 gdbus: run peer test multiple times with different addresses
This ensures that D-Bus connections established with unix:dir and
unix:path addresses actually work properly. Previously, we only tested
unix:tmpdir and TCP addresses.
2019-06-17 12:08:06 -05:00
Michael Catanzaro
eca16677c0 gdbus: Fix minor leak in peer test
This has to be freed even on Windows.
2019-06-17 12:08:06 -05:00
Michael Catanzaro
beac9fe211 gdbus: Clean up sockets and nonces from filesystem
When we close the GDBusServer, it should remove any non-abstract Unix
sockets or TCP nonce files it created from the filesystem.

Fixes #1808
2019-06-17 12:08:06 -05:00
Christoph Reiter
180e59539c build: work around meson issue with too long filenames on Windows. Fixes #1556
When using glib as a meson subproject on Windows the build currently fails
due to too long paths during the build process. See
https://github.com/mesonbuild/meson/issues/4226 for the upstream bug.

To work around the issue shorten the filenames of the generated gdbus files.
2018-10-04 10:45:45 +02:00
Philip Withnall
93b519b104 tests: Various minor leak fixes in the GIO tests
Signed-off-by: Philip Withnall <withnall@endlessm.com>
2018-06-29 12:13:32 +01:00
Emmanuele Bassi
d8a3492fce Allow running gdbus-peer inside a container
The /etc/machine-id inside a Docker container is allowed to be empty, so
we need to check for that case.

https://bugzilla.gnome.org/show_bug.cgi?id=793635
2018-02-20 13:49:21 +00:00
Philip Withnall
22b224862c tests: Add a debug message to gdbus-peer test
This might help diagnose the CI test failure here:
https://gitlab.gnome.org/GNOME/glib/-/jobs/8222

Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
2018-02-19 11:11:36 +00:00
Philip Withnall
5cddde1fb2 Consistently save errno immediately after the operation setting it
Prevent the situation where errno is set by function A, then function B
is called (which is typically _(), but could be anything else) and it
overwrites errno, then errno is checked by the caller.

errno is a horrific API, and we need to be careful to save its value as
soon as a function call (which might set it) returns. i.e. Follow the
pattern:
  int errsv, ret;
  ret = some_call_which_might_set_errno ();
  errsv = errno;

  if (ret < 0)
    puts (strerror (errsv));

This patch implements that pattern throughout GLib. There might be a few
places in the test code which still use errno directly. They should be
ported as necessary. It doesn’t modify all the call sites like this:
  if (some_call_which_might_set_errno () && errno == ESOMETHING)
since the refactoring involved is probably more harmful than beneficial
there. It does, however, refactor other call sites regardless of whether
they were originally buggy.

https://bugzilla.gnome.org/show_bug.cgi?id=785577
2017-08-03 10:21:13 +01:00
Philip Withnall
18f8b77c04 gio: Use g_strerror() instead of strerror()
This marginally improves thread safety, and marginally improves
consistency.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=733821
2017-06-21 11:20:29 +01:00
Sébastien Wilmet
d9a44b66af gio/tests/: LGPLv2+ -> LGPLv2.1+
A lot of tests in gio/tests/ don't have a license header.

https://bugzilla.gnome.org/show_bug.cgi?id=776504
2017-05-29 19:53:34 +02:00
Philip Withnall
5cdf0efaab tests: Fix a typo on a dereferencing assignment
Otherwise the assignment is pointless. Spotted by cppcheck.
2016-08-13 10:24:23 +02:00
Dan Winship
9f2e3f6b72 gtestutils: add g_assert_cmpmem()
Add a test macro to compare two buffers (which are not already known
to be the same length) for equality.

https://bugzilla.gnome.org/show_bug.cgi?id=754283
2015-08-31 13:59:48 -04:00
Simon McVittie
45dae4b506 tests: replace most g_print() with g_printerr()
I searched all files that mention g_test_run, and replaced most
g_print() calls. This avoids interfering with TAP. Exceptions:

* gio/tests/network-monitor: a manual mode that is run by
  "./network-monitor --watch" is unaffected
* glib/gtester.c: not a test
* glib/gtestutils.c: not a test
* glib/tests/logging.c: specifically exercising g_print()
* glib/tests/markup-parse.c: a manual mode that is run by
  "./markup-parse --cdata-as-text" is unaffected
* glib/tests/testing.c: specifically exercising capture of stdout
  in subprocesses
* glib/tests/utils.c: captures a subprocess's stdout
* glib/tests/testglib.c: exercises an assertion failure in g_print()

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
2015-05-11 20:24:56 +01:00
Simon McVittie
6f859fe21a gdbus-peer test: let GDBusServer start before notifying main thread
When running the nonce-tcp and tcp-anonymous tests in one run
of gdbus-peer, or running one of them twice via command-line options
"-p /gdbus/tcp-anonymous -p /gdbus/tcp-anonymous", the one run second
would sometimes fail to connect with ECONNRESET.

Adding more debug messages revealed that in the successful case,
g_main_loop_run() was executed in the server thread first:

 # tcp-anonymous: server thread: listening on tcp:host=localhost,port=53517
 # tcp-anonymous: server thread: starting server...
 # tcp-anonymous: server thread: creating main loop...
 # tcp-anonymous: server thread: running main loop...
 # tcp-anonymous: main thread: trying tcp:host=localhost,port=53517...
 # tcp-anonymous: main thread: waiting for server thread...

but in the failing case, the main thread attempted to connect
before the call to g_main_loop_run() in the server thread:

 # tcp-anonymous: server thread: listening on tcp:host=localhost,port=40659
 # tcp-anonymous: server thread: starting server...
 # tcp-anonymous: server thread: creating main loop...
 # tcp-anonymous: main thread: trying tcp:host=localhost,port=40659...
 # tcp-anonymous: server thread: running main loop...

(The log message "creating main loop" was immediately before
create_service_loop(), and "running main loop" was immediately
before g_main_loop_run().)

To ensure that the GDBusServer has a chance to start accepting
connections before the main thread tries to connect to it, do not
tell the main thread about the service_loop immediately, but instead
defer it to an idle.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=749079
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
2015-05-11 14:17:55 +01:00
Daniel Mustieles
078dbda148 Updated FSF's address 2014-01-31 14:31:55 +01:00
Matthias Clasen
1041fc2190 Improve gdbus test coverage 2014-01-01 17:59:21 -05:00
Dan Winship
cedd697bf8 gcredentials: add internal macros to simplify all the #ifdefs
Rather than having lots of obscure platform-based #ifdefs all over
gio, define some macros in gcredentialsprivate.h, and use those to
simplify the rest of the code.

https://bugzilla.gnome.org/show_bug.cgi?id=701482
2013-10-04 09:51:31 -04:00
Ryan Lortie
f9eb9eed10 Rework the build system for a new tests approach
Perform a substantial cleanup of the build system with respect to
building and installing testcases.

First, Makefile.decl has been renamed glib.mk and substantially
expanded.  We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.

By default, tests are no longer compiled as part of 'make'.  They will
be built when 'make check' is run.  The old behaviour can be obtained
with --enable-always-build-tests.

--disable-modular-tests is gone (because tests are no longer built by
default).  There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.

A new glibtests.m4 file is introduced.  Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).

Port our various test-installing Makefiles to the new framework.

This patch substantially improves the situation in the toplevel tests/
directory.  Things are now somewhat under control there.  There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.

As an experiment, 'make check' now runs the testcases on win32 builds,
by default.  We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS.  Most of
them are passing on win32.

Things are not quite done here, but this patch is already a substantial
improvement.  More to come.
2013-05-31 23:12:15 -04:00
Matthias Clasen
a114e98d09 Split off the gdbus-overflow test
It is unrealiable under load, and frequently fails in the
ostree tests. See https://bugzilla.gnome.org/show_bug.cgi?id=701105
2013-05-31 21:24:21 -04:00
Ryan Lortie
8df1bb3486 Rename G_TEST_DISTED to G_TEST_DIST
Since this feature is so utterly automake-centric, we may as well be
using the same terminology as automake itself (ie: although it's
BUILT_SOURCES, it's DIST_EXTRA, not DISTED).

Also add some comments to the enum explaining that these terms are
really corresponding directly to the automake terms.

https://bugzilla.gnome.org/show_bug.cgi?id=549783
2013-05-29 09:03:32 -04:00
Ryan Lortie
17ded322c5 tests: move tests to new _get_filename() API
This API was introduced to save a few lines of code here and there, so
let's start by removing a bunch from our own tests.

https://bugzilla.gnome.org/show_bug.cgi?id=549783
2013-05-29 09:03:32 -04:00
Ryan Lortie
58c6ca32aa tests: use new g_test_build_filename() API
Port most of the tests to the new g_test_build_filename() API.

https://bugzilla.gnome.org/show_bug.cgi?id=549783
2013-05-29 09:03:31 -04:00
Colin Walters
49030c8797 gdbus-peer: Drop some usage of g_thread_yield()
It's a recipe for race conditions and error; on some hardware
architectures one thread isn't guaranteed to see the results
of writes from another thread without a cache flush.

https://bugzilla.gnome.org/show_bug.cgi?id=700855
2013-05-23 10:11:21 -04:00
Colin Walters
3d7fcc23c1 gio/tests: Make gdbus-peer work in installed mode
There's no /etc/hosts in gnome-ostree...
2013-05-20 21:50:28 +01:00
Simon McVittie
2fe36a2238 Check that credentials pass through D-Bus on supported platforms
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=687920
2012-12-19 15:14:35 -05:00
Dan Winship
b377e69685 Add gnetworking.h
Install a public "gnetworking.h" header that can be used to include
the relevant OS-dependent networking headers. This does not really
abstract away unix-vs-windows however; error codes, in particular,
are incompatible.

gnetworkingprivate.h now contains just a few internal URI-related
functions

Also add a g_networking_init() function to gnetworking.h, which can be
used to explicitly initialize OS-level networking, rather than having
that happen as a side-effect of registering GInetAddress.

https://bugzilla.gnome.org/show_bug.cgi?id=623187
2012-12-12 15:20:22 +01:00
Colin Walters
6d88a2f822 build: Add missing "static" keyword where it should be used
Otherwise we fail to build with -Werror=missing-prototypes.

https://bugzilla.gnome.org/show_bug.cgi?id=687385
2012-11-01 20:12:01 -04:00
Ryan Lortie
1dc774a653 Remove g_type_init() calls
Very many testcases, some GLib tools (resource compiler, etc) and
GApplication were calling g_type_init().

Remove those uses, as they are no longer required.

https://bugzilla.gnome.org/show_bug.cgi?id=686161
2012-10-16 09:39:24 -04:00
Colin Walters
6e64ba58b9 Switch all open() calls to use g_open()
Because it now handles EINTR.  And we should do so.  While most people
use Linux, which tries very hard to avoid propagating EINTR back up
into userspace, it can still happen.

https://bugzilla.gnome.org/show_bug.cgi?id=682833
2012-08-28 13:56:59 -04:00
Xavier Claessens
415a8d81f6 Use GTestDBus in all GDBus unit tests
To make port easier, this rewrites dbus-sessionbus.c using a
GTestDBus singleton internally.

https://bugzilla.gnome.org/show_bug.cgi?id=672985
2012-04-19 10:07:39 +02:00
David Zeuthen
a6f83d73e5 Revert "Add GTestDBus object"
This reverts commit 1b5f70b5b0.
2012-04-18 13:47:51 -04:00
Xavier Claessens
1b5f70b5b0 Add GTestDBus object
This is a helper to write unit tests using a private dbus-daemon.

session_bus_up/down() are now just wrappers around a GTestDBus singleton.

https://bugzilla.gnome.org/show_bug.cgi?id=672985
2012-04-18 11:19:13 -04:00
Matthias Clasen
3072e7afee gdbusserver: Improve test coverage 2012-04-08 10:24:51 -04:00
Javier Jardón
ee044fd839 gio/tests: Use g_list_free_full() convenience function 2012-01-02 23:18:22 +01:00
Chris Coulson
162bafee37 Initialize service_loop before running the service thread
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=666129
2011-12-14 21:15:35 -05:00
Tristan Van Berkom
a00530ecb0 GDBusInterfaceSkeleton: make it possible to export on multiple connections
This is useful in peer-to-peer connections.

With minor changes by David Zeuthen <davidz@redhat.com>.

https://bugzilla.gnome.org/show_bug.cgi?id=662718

Signed-off-by: David Zeuthen <davidz@redhat.com>
2011-12-02 11:20:21 -05:00
Ryan Lortie
430c5635f2 g_thread_new: never fail
Remove the GError argument from g_thread_new() and abort on failure.
Introduce g_thread_try() for those who want to handle failure.
2011-10-13 01:00:57 -04:00
Ryan Lortie
015f4b4513 thread: nuke the concept of 'joinable'
And remove the 'joinable' argument from g_thread_new() and
g_thread_new_full().

Change the wording in the docs.  Clarify expectations for
(deprecated) g_thread_create().
2011-10-13 00:43:33 -04:00
Matthias Clasen
93e49aea1b Don't use deprecated GThread API in gio tests 2011-10-10 09:49:50 -04:00
Antoine Jacoutot
c739a5df14 gio: enable test_peer regression test for OpenBSD
https://bugzilla.gnome.org/show_bug.cgi?id=661255
2011-10-08 17:11:39 +02:00
Dan Winship
302a5072c9 gio/tests/gdbus-peer: make this work on non-Linux unixes
The test was using a socket in a temporary directory, but not actually
creating that temporary directory. This worked fine on Linux since it
actually ended up using an abstract socket instead, but failed on
unixes without abstract sockets.

https://bugzilla.gnome.org/show_bug.cgi?id=657517
2011-08-30 09:52:46 -04:00
Matthias Clasen
4cb33b158b Explicitly unset the session bus address for the peer tests
Otherwise, we may run into trouble as opening a peer-to-peer
connection uses a socket client, which uses a proxy resolver
which may end up using gsettings, whose dconf backend may end
up using the session bus to talk to dconfd...
2011-07-23 21:59:49 -04:00
David Zeuthen
322e25b535 GDBus: Unref worker from worker-thread to avoid race
... otherwise we might end up using the worker after it has been
freed. Reported by Dan Winship and Colin Walters.

This fix uncovered a bug in the /gdbus/nonce-tcp test case so "fix"
that as well to use a better way of having one thread wait for another
(using quotes for the word "fix" since it's pretty hackish to
busy-wait in one thread to wait for another).

Signed-off-by: David Zeuthen <davidz@redhat.com>
2011-06-20 16:32:03 -04:00
Dan Winship
e56498ee0b Fix usage of _GNU_SOURCE
_GNU_SOURCE must be defined before including any other (system)
header, so defining it in glib-unix.h (and hoping no one has included
anything else before that) is wrong. And the "#define _USE_GNU"
workaround for this problem in gnetworkingprivate.h is even wronger
(and still prone to failure anyway due to single-include guards).

Fix this by defining _GNU_SOURCE in config.h when building against
glibc. In theory this is bad because new releases of glibc may include
symbols that conflict with glib symbols, which could then cause
compile failures. However, most people only see new releases of glibc
when they upgrade their distro, at which point they also generally get
new releases of gcc, which have new warnings/errors to clean up
anyway.

https://bugzilla.gnome.org/show_bug.cgi?id=649201
2011-05-03 07:07:41 -04:00
David Zeuthen
4da1824759 GResolver: Don't return duplicate addresses
... this was causing a GDBus test-case to fail so now that it is
fixed, also reenable the test case.

https://bugzilla.gnome.org/show_bug.cgi?id=631379

Signed-off-by: David Zeuthen <davidz@redhat.com>
2011-04-14 12:46:54 -04:00
David Zeuthen
3b997d92c1 GDBus: Add test case for the ANONYMOUS authentication method
Signed-off-by: David Zeuthen <davidz@redhat.com>
2011-04-13 18:21:16 -04:00
Benjamin Otte
b9a98a81da gio: Comment out a whole test
... instead of just commenting out the registration and leaving "unused
function" warnings for gcc.
2010-12-02 20:11:28 +01:00
Ryan Lortie
a2ac9c2515 GDBus: disable test to work around bug #631379
This test consistently prevents 'make distcheck' from passing on Ubuntu.
2010-10-19 13:45:20 +02:00
David Zeuthen
ee945d8f62 GDBusServer: Make ::new-connection return whether the connection was claimed
Otherwise things probably won't work in a garbage-collected world
(consider the trivial GC that never collects garbage).

This commit breaks GDBusServer ABI. No known released software is
using this code.

Signed-off-by: David Zeuthen <davidz@redhat.com>
2010-09-09 14:02:31 -04:00
David Zeuthen
c3371efcaa Bug 624546 – Modification of GDBusMessage in filter function
Rework filter functions as per

 https://bugzilla.gnome.org/show_bug.cgi?id=624546#c8

This commit breaks ABI. However, this ABI break affects only
applications using filter functions. The only known user of is dconf.

Signed-off-by: David Zeuthen <davidz@redhat.com>
2010-09-09 13:21:35 -04:00