The `g_file_trash` function fails with the `Unable to find or create trash
directory` error when the global `.Trash` directory exists. This is because
the commit 7f2af262 introduced the `gboolean success` variable to signalize
the detection of the trash folder, but didn't set it in all code branches.
Since for a time this variable was not initialized the bug wasn't visible
when the trash folder existed. The bug became effective after the `success`
variable was initialized with `FALSE` by the commit c983ded0. Let's explicitly
set the `success` variable in all branches to fix the global trash dir
detection.
Fixes: https://gitlab.gnome.org/GNOME/glib/-/issues/2439
If `g_file_monitor_source_dispatch()` drops the last reference to its
`GLocalFileMonitor`, a deadlock will occur, because disposing the
`GLocalFileMonitor` causes synchronous disposal of the
`GFileMonitorSource`, and hence an attempt to re-lock the already-locked
mutex in the `GFileMonitorSource`.
Fix that by dropping the reference to the `GLocalFileMonitor` after
unlocking.
Diagnosed by Ting-Wei Lan. The bug was originally introduced by me in
commit 592a13b483.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Since commit 87e19535fe, the ETag check when writing out a file through
a symlink (following the symlink) has been incorrectly using the ETag
value of the symlink, rather than the target file. This is incorrect
because the ETag should represent the file content, not its metadata or
links to it.
Fix that, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2417
This fixes a bug where the family flag was ignored in lookup_data_new,
causing the resolver to call getaddrinfo with no hints set when clearly
the family hint should have been set.
The code did not handle EOF (0 byte read) correctly. This can e.g. cause
an infinite loop if an incorrect socks proxy is configured.
Add the appropriate checks and return an G_IO_ERROR_CONNECTION_CLOSED
error if EOF is encountered.
After the recent reworking of this code it was possible for `g_close()`
to be called on `fd == -1`, which is invalid. It would have reported an
error, were errors not ignored. So it was harmless, but still best to
fix.
Simplify the error handling by combining both error labels and checking
the state of `fd` dynamically.
Coverity CID: #1450834
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The variable `gconstructor_code` (which is what’s defined by
`gconstructor_as_data_h`) is not used at all inside
`glib-compile-schemas`.
This looks like a copy/paste error from the build definition for
`glib-compile-resources` below, which does need it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
In the 2.68 cycle we’d added 3 new enumerator elements. Due to the
preceding commit, they can now be annotated with
`GLIB_AVAILABLE_ENUMERATOR_IN_2_68`, which will make it a bit easier for
third party projects to notice when they’re using these symbols without
having bumped their GLib dependency.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2327
`""` is not a valid path (`stat()` on it returns `ENOENT`). Previously,
a full `GLocalFile` was being created, which ended up resolving to
`$CWD`, through path canonicalisation. That isn’t right.
Fix it by creating a `GDummyFile` instead, and adding a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2328
Calling `dlopen()` with `libutil.so` makes the installed tests depend on
having glibc's development files installed. To avoid this, we can work
out the runtime library name at build time and `dlopen` that instead.
This approach is [taken from libfprint][1], thanks to Marco Trevisan.
[1]: f401f399a8
`ENXIO` can be returned from `open(2)` for special files (FIFOs, device
files and domain sockets) which are not backed by anything.
This fixes the error returned by `g_file_replace()` when trying to
replace such a file, so that it now matches the documentation.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
These test all the functionality and combinations of flags I can think
of. They do not cover dynamic behaviour (for example, what would happen
if the source file is deleted by another process part-way through a call
to `g_file_replace()`).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The `G_FILE_CREATE_REPLACE_DESTINATION` flag is equivalent to unlinking
the destination file and re-creating it from scratch. That did
previously work, but in the process the code would call `open(O_CREAT)`
on the file. If the file was a dangling symlink, this would create the
destination file (empty). That’s not an intended side-effect, and has
security implications if the symlink is controlled by a lower-privileged
process.
Fix that by not opening the destination file if it’s a symlink, and
adjusting the rest of the code to cope with
- the fact that `fd == -1` is not an error iff `is_symlink` is true,
- and that `original_stat` will contain the `lstat()` results for the
symlink now, rather than the `stat()` results for its target (again,
iff `is_symlink` is true).
This means that the target of the dangling symlink is no longer created,
which was the bug. The symlink itself continues to be replaced (as
before) with the new file — this is the intended behaviour of
`g_file_replace()`.
The behaviour for non-symlink cases, or cases where the symlink was not
dangling, should be unchanged.
Includes a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2325
Since a following commit is going to add a new test which references
Gitlab, so it’s best to move the URI bases inside the test cases.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This will require distributions to ensure they pass
`--localstatedir=/var` correctly to Meson, but they should be doing that
already.
See https://mesonbuild.com/Builtin-options.html#directories for details
about how Meson treats `localstatedir` differently from most other `dir`
variables.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It’s unlikely that the machine ID will be invalid (it’s system
configuration), but it would be helpful to not propagate invalid IDs
further, since a lot of things rely on it.
It’s not easy to test this (it requires factoring out the code so it can
be used from a test program, or allowing it to load a machine ID from a
custom path), so I haven’t added unit tests. I’ve tested manually by
overriding the loaded machine ID.
Coverity CID: #1430944
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
For non-Linux UNIX systems, the label 'close_libutil:' in
'test_pollable_unix_pty()' will have no statement that goes with that
label. Just do a 'return' on non-Linux UNIX systems.
File monitor creation may fail. We should check for this, rather than
ignoring it and then spewing criticals upon improperly assuming that we
have a valid GFileMonitor rather than NULL.
In practice, creating the GFileMonitors here fail when opening a large
number of tabs in Epiphany. I'm still investigating to see why, but it
doesn't matter for the purposes of this commit.
Expand an existing unit test to check that the target FD of a
`g_subprocess_launcher_take_fd()` call doesn’t get closed when
`g_subprocess_launcher_close()` is called. Only the source FD should be
closed by the parent process.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2332
This is a regression introduced in commit 67a589e505311. Previously, the
source/target FD pairs were stored in `needdup_fd_assignments`, in
consecutive entries, so source FDs had even indices and target FDs had
odd indices.
I didn’t notice that the array index was being incremented by 2 when
closing FDs, when porting from the old code. So previously the code was
only closing the source FDs; after the port, it was closing source and
target FDs.
That’s incorrect, as the target FDs are just integers in the parent
process. It’s only in the child process where they are actually FDs —
and `g_subprocess_launcher_close()` is never called in the child
process.
This resulted in some strange misbehaviours in any process which used
`g_subprocess_launcher_take_fd()` with target FDs which could have
possibly aliased with other FDs in the parent process (and which weren’t
equal to their mapped source FDs).
Thanks to Olivier Fourdan for the detailed bug report.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2332
This was correctly annotated for proper return values but in case of out
parameters it was only annotated as (optional) and not additionally as
(nullable).
This improves performance by eliminating the use of a
`GSpawnChildSetupFunc` in the common case (since that setup code has now
moved into `g_spawn*()` itself), and enables the use of the fix to avoid
the child error reporting FD being overwritten by target FD mappings,
introduced via `g_spawn_async_with_pipes_and_fds()`.
It reworks how the source/target FD mapping is stored within
`GSubprocessLauncher` to match what `g_spawn*()` uses. The two
approaches are equivalent.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2097
gio/gmemoryoutputstream.c: In function ‘g_memory_output_stream_seek’:
gio/gmemoryoutputstream.c:792:44: error: comparison of integer expressions of different signedness: ‘goffset’ {aka ‘long int’} and ‘gsize’ {aka ‘long unsigned int’}
792 | if (priv->realloc_fn == NULL && absolute > priv->len)
| ^
gio/gdummyfile.c: In function ‘unescape_string’:
gio/gdummyfile.c:485:32: error: comparison of integer expressions of different signedness: ‘long int’ and ‘size_t’ {aka ‘long unsigned int’}
485 | g_warn_if_fail (out - result <= strlen (escaped_string));
| ^~
