Add SPDX license (but not copyright) headers to all files which follow a
certain pattern in their existing non-machine-readable header comment.
This commit was entirely generated using the command:
```
git ls-files glib/*.[ch] | xargs perl -0777 -pi -e 's/\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/\n \*\n \* SPDX-License-Identifier: LGPL-2.1-or-later\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/igs'
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
These variables were already (correctly) accessed atomically. The
`volatile` qualifier doesn’t help with that.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
sysprof already shows forks in the waterfall. The
main benefit of adding a mark is that it makes the
thread name show up in the trace, next to the fork.
The g_once() function exists to call a callback function exactly once,
and to block multiple contending threads on its completion, then to
return its return value to all of them (so they all see the same value).
The full implementation of g_once() (in g_once_impl()) uses a mutex and
condition variable to achieve this, and is needed in the contended case,
where multiple threads need to be blocked on completion of the callback.
However, most of the times that g_once() is called, the callback will
already have been called, and it just needs to establish that it has
been called and to return the stored return value.
Previously, a fast path was used if we knew that memory barriers were
not needed on the current architecture to safely access two dependent
global variables in the presence of multi-threaded access. This is true
of all sequentially consistent architectures.
Checking whether we could use this fast path (if
`G_ATOMIC_OP_MEMORY_BARRIER_NEEDED` was *not* defined) was a bit of a
pain, though, as it required GLib to know the memory consistency model
of every architecture. This kind of knowledge is traditionally a
compiler’s domain.
So, simplify the fast path by using the compiler-provided atomic
intrinsics, and acquire-release memory consistency semantics, if they
are available. If they’re not available, fall back to always locking as
before.
We definitely need to use `__ATOMIC_ACQUIRE` in the macro implementation
of g_once(). We don’t actually need to make the `__ATOMIC_RELEASE`
changes in `gthread.c` though, since locking and unlocking a mutex
guarantees to insert a full compiler and hardware memory barrier
(enforcing sequential consistency). So the `__ATOMIC_RELEASE` changes
are only in there to make it obvious what stores are logically meant to
match up with the `__ATOMIC_ACQUIRE` loads in `gthread.h`.
Notably, only the second store (and the first load) has to be atomic.
i.e. When storing `once->retval` and `once->status`, the first store is
normal and the second is atomic. This is because the writes have a
happens-before relationship, and all (atomic or non-atomic) writes
which happen-before an atomic store/release are visible in the thread
doing an atomic load/acquire on the same atomic variable, once that load
is complete.
References:
* https://preshing.com/20120913/acquire-and-release-semantics/
* https://gcc.gnu.org/onlinedocs/gcc-9.2.0/gcc/_005f_005fatomic-Builtins.html
* https://gcc.gnu.org/wiki/Atomic/GCCMM/AtomicSync
* https://en.cppreference.com/w/cpp/atomic/memory_order#Release-Acquire_ordering
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1323
It’s not expected that bindings will use `GThread` over their own
threading APIs (in fact that would generally be a bad idea, since
threads benefit from being integrated into language control flow
structures), but it can’t hurt to have the annotations right for
documentation purposes if nothing else.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #602
This will be used in a following commit to warn if setenv() is used
after another thread has been created.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #715
On Linux the sched_getattr syscall might be available at compile-time
but not actually work at runtime (e.g. because an older kernel is
running or valgrind is used). Instead of killing the process, return
FALSE and handle this gracefully at runtime with some fallback code.
Fixes https://gitlab.gnome.org/GNOME/glib/issues/2007
By default (on POSIX) we would be inheriting thread priorities from the
thread that pushed a new task on non-exclusive thread pools and causes a
new thread to be created. This can cause any non-exclusive thread pool
to accidentally contain threads of different priorities, or e.g. threads
with real-time priority.
To prevent this, custom handling for setting the scheduler settings for
Linux and Windows is added and as a fallback for other platforms a new
thread is added that is responsible for spawning threads for
non-exclusive thread pools.
Fixes https://gitlab.gnome.org/GNOME/glib/issues/1834
Various places that used atomic functions were using the wrong return
type. Fix that. This introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This code was a persistent source of `-fsanitize=thread` errors
when I was trying to use it on OSTree.
The problem is that while I think this code is functionally correct,
we hold a mutex during the writes, but not the reads, and TSAN (IMO
correctly) flags that.
Reading this, I don't see a reason we need a mutex at all. At the
cost of some small code duplication between posix/win32, we can just
pass the data we need down into each implementation. This ends up
being notably cleaner I think than the awkward "lock/unlock to
serialize" dance.
(Minor review changes made by Philip Withnall <withnall@endlessm.com>.)
https://gitlab.gnome.org/GNOME/glib/issues/1224
This is a wrapper around g_private_set() which allocates the desired
amount of memory for the caller and calls g_private_set() on it.
This is intended to make it easier to suppress Valgrind warnings about
leaked memory, since g_private_set() is typically used to make one-time
per-thread allocations. We can now just add a blanket suppression rule
for any allocations inside g_private_set_alloc0().
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As we use pthread_rwlock_*() to implement GRWLock (on Unix), the
priority of readers vs writers when trying to acquire a lock already
held by one reader with a writer queued, is unspecified. i.e. We don’t
explicitly prioritise the pending readers to acquire the lock (and block
the writer), or vice-versa.
Whatever our implementation on other platforms, we must document the
priority as unspecified, as that’s what happens on Unix and is the
least restrictive API guarantee we can make.
Prompted by https://stackoverflow.com/q/52661672/2931197.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
All glib/*.{c,h} files have been processed, as well as gtester-report.
12 of those files are not licensed under LGPL:
gbsearcharray.h
gconstructor.h
glibintl.h
gmirroringtable.h
gscripttable.h
gtranslit-data.h
gunibreak.h
gunichartables.h
gunicomp.h
gunidecomp.h
valgrind.h
win_iconv.c
Some of them are generated files, some are licensed under a BSD-style
license and win_iconv.c is in the public domain.
Sub-directories inside glib/:
deprecated/: processed in a previous commit
glib-mirroring-tab/: already LGPLv2.1+
gnulib/: not modified, the code is copied from gnulib
libcharset/: a copy
pcre/: a copy
tests/: processed in a previous commit
https://bugzilla.gnome.org/show_bug.cgi?id=776504
If we have an input parameter (or return value) we need to use (nullable).
However, if it is an (inout) or (out) parameter, (optional) is sufficient.
It looks like (nullable) could be used for everything according to the
Annotation documentation, but (optional) is more specific.
Expand the set of available probes, and add a few more output parameters
to some of the existing ones to make them more useful. I do not know if
this breaks any existing stability guarantees for GLib’s SystemTap
tapset, as it is effectively just adding some more local variables in
the user’s probe.
https://bugzilla.gnome.org/show_bug.cgi?id=759813
Add various (nullable) and (optional) annotations which were missing
from a variety of functions. Also port a couple of existing (allow-none)
annotations in the same files to use (nullable) and (optional) as
appropriate instead.
Secondly, add various (not nullable) annotations as needed by the new
default in gobject-introspection of marking gpointers as (nullable). See
https://bugzilla.gnome.org/show_bug.cgi?id=729660.
This includes adding some stub documentation comments for the
assertion macro error functions, which weren’t previously documented.
The new comments are purely to allow for annotations, and hence are
marked as (skip) to prevent the symbols appearing in the GIR file.
https://bugzilla.gnome.org/show_bug.cgi?id=719966
It’s unfortunately common to see worker threads being spawned all over
the place to do operations which could be brought into the main thread
with an async call, simplifying everything.
https://bugzilla.gnome.org/show_bug.cgi?id=741779
Since we are no longer using sgml mode, using /* */ to
escape block comments inside examples does not work anymore.
Switch to using line comments with //
In Windows development environments that have it, <unistd.h> is mostly
just a wrapper around several other native headers (in particular,
<io.h>, which contains read(), close(), etc, and <process.h>, which
contains getpid()). But given that some Windows dev environments don't
have <unistd.h>, everything that uses those functions on Windows
already needed to include the correct Windows header as well, and so
there is never any point to including <unistd.h> on Windows.
Also, remove some <unistd.h> includes (and a few others) that were
unnecessary even on unix.
https://bugzilla.gnome.org/show_bug.cgi?id=710519
