We don't need to run binaries we just built in order to successfully
build GLib and friends any more.
Since commit b74e2a7, we don't need to run glib-genmarshal when building
GIO; since commit f9eb9eed, all our tests (including the ones that do
need to run binaries we just built) are only built when running "make
check", instead of unconditionally at every build.
This means that we don't need to check for existing, native binaries
when cross-compiling, and fail the configuration step if they are not
found — which also means that you don't need to natively build GLib for
your toolchain, in order to cross-compile GLib.
We can also use the cross-compilation conditional, and skip those tests
that require a binary we just built in order to build.
https://bugzilla.gnome.org/show_bug.cgi?id=753745
I searched all files that mention g_test_run, and replaced most
g_print() calls. This avoids interfering with TAP. Exceptions:
* gio/tests/network-monitor: a manual mode that is run by
"./network-monitor --watch" is unaffected
* glib/gtester.c: not a test
* glib/gtestutils.c: not a test
* glib/tests/logging.c: specifically exercising g_print()
* glib/tests/markup-parse.c: a manual mode that is run by
"./markup-parse --cdata-as-text" is unaffected
* glib/tests/testing.c: specifically exercising capture of stdout
in subprocesses
* glib/tests/utils.c: captures a subprocess's stdout
* glib/tests/testglib.c: exercises an assertion failure in g_print()
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
The test is to remove all the odd values with my_hash_callback_remove(),
then iterate over all values and verify that they are even. However,
failing this check would just print "bad!" instead of failing the test.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
gdb is run in batch mode, and can leave leave the program being
executed/debugged running when the batchfile is finished. Explicitly
"quit"ing the subprocess prevents it from leaving the stray subprocess
when gdb finishes.
https://bugzilla.gnome.org/show_bug.cgi?id=731366
It turns out that due to a recent gdm change, the inherited
signal mask has SIGUSR1 blocked - which is bad news for
tests using SIGUSR1. Fix the test by explicitly checking the
signal mask before using SIGUSR1.
The mapping-test is failing under gnome-continuous. I suspect this
is simply due to running many tests in parallel, and mapping-test
being racy. Replace the blind sleep by signals, to avoid the
races.
g_time_val_from_iso8601 was attempting to parse strings
having only a date, but failed to actually set the timeval
despite returning TRUE. Since the docs state that the function
only parses strings containing a date and a time, just return
FALSE in this case.
Also remove an incomplete testcase for this behaviour that was
just checking the boolean return value, but not timeval.
In Windows development environments that have it, <unistd.h> is mostly
just a wrapper around several other native headers (in particular,
<io.h>, which contains read(), close(), etc, and <process.h>, which
contains getpid()). But given that some Windows dev environments don't
have <unistd.h>, everything that uses those functions on Windows
already needed to include the correct Windows header as well, and so
there is never any point to including <unistd.h> on Windows.
Also, remove some <unistd.h> includes (and a few others) that were
unnecessary even on unix.
https://bugzilla.gnome.org/show_bug.cgi?id=710519
...and only include unistd.h when we are on *NIX.
Newer Visual C++ runtimes (8.0/2005 and later) will cause the program to
crash with an internal abort() call when they detect instances of close()
being called on an invalid fd, such as when the fd is -1, and these should
be purged anyways.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
Visual C++ does not like function declarations being different from
their prototypes, so make the prototypes match the declarations by
decorating them with G_MODULE_EXPORT.
https://bugzilla.gnome.org/show_bug.cgi?id=711047
Recent changes to the properties testcase made invalid use of the GArray
free function. This free function takes a pointer to the item to be
freed, not the item itself. Since that item was a pointer to a GObject,
g_object_unref() was getting a GObject**, rather than a GObject*.
The use of GArray in this testcase is pretty questionable in the first
place, so just use C arrays instead.
This commit adds a test to ensure that during a signal emission, if
a signal handler gets disconnected, it won't be run, even if it would
have run before the disconnection.
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
After this patch, there is but one remaining use of g_thread_init(),
which is in tests/slice-threadinit.c, a testcase dedicated to testing
the functionality of gslice across a g_thread_init() boundary.
This testcase is pretty meaningless these days... probably we should
delete it.
This should be the last users that need to be ported.
For some of the oldschool non-gtester-ified tests, we call g_test_init()
from main() because it is necessary in order to use
g_test_build_filename().
testgobject.c and timeloop-closure.c are the only two tests in the
toplevel tests/ directory that depend on gobject, so move them to
tests/gobject/ along with the other gobject tests.
Both of these were in noinst_PROGRAMS and not TESTS, so keep them that
way when we move them.
Back in the far-off twentieth century, it was normal on unix
workstations for U+0060 GRAVE ACCENT to be drawn as "‛" and for U+0027
APOSTROPHE to be drawn as "’". This led to the convention of using
them as poor-man's ‛smart quotes’ in ASCII-only text.
However, "'" is now universally drawn as a vertical line, and "`" at a
45-degree angle, making them an `odd couple' when used together.
Unfortunately, there are lots of very old strings in glib, and also
lots of new strings in which people have kept up the old tradition,
perhaps entirely unaware that it used to not look stupid.
Fix this by just using 'dumb quotes' everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=700746
We have some testcases that assert that type modules are unloaded after
the last reference on them is dropped. Comment out those asserts now
that we turned the last unref into a no-op.
https://bugzilla.gnome.org/show_bug.cgi?id=693351
We only want to control the default visibility for our five main
installable libraries: libglib, libgthread, libgmodule, libgobject,
libgio. We should therefore only set -fvisibility=hidden when building
those.
Use a separate substitution variable for this purpose.
Using CFLAGS directly leads to some modules built in testcases not
exporting their symbols (and then the tests fail). It also affects the
fam file monitoring module.
Colin had originally done it this way in his visibility patch series but
I failed to understand why so I didn't copy it. Now I do.
Also: revert changes made to two testcases in an attempt to work around
this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=691756
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
1) use "../libtool" rather than "libtool" to avoid problems
with wacky OS X not-actually-libtool
2) Use libtool on the libtool script, not the binary, so that it
actually does anything
3) Don't use "gdb --ex" since it's apparently new-ish/non-portable.
https://bugzilla.gnome.org/show_bug.cgi?id=684723
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
I'm normally a big fan of small atomic commits, but I also want to get
things done this afternoon...
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=687441
Reviewed-by: Colin Walters <walters@verbum.org>
Very many testcases, some GLib tools (resource compiler, etc) and
GApplication were calling g_type_init().
Remove those uses, as they are no longer required.
https://bugzilla.gnome.org/show_bug.cgi?id=686161
"make check" was failing on sys/resource.h not being available on
win32. Seeing that this test just spews some numbers on stdout
whithout really testing anything we can safely replace them with
similar enough numbers by relying on g_get_monotonic_time ().
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=682386
gdb by default will only print strings up to 200 characters. After that
it abbreviates them. This affects the run-assert-msg-test.sh script if
the path to the glib installation is too long (in our case it was 133
characters, 132 would still have worked...)
By having gdb execute "set print elements 0" before printing the assert
string, the limit on maximum number of characters to print is set to
unlimited.
Signed-off-by: Peter Kjellerstedt <pkj@axis.com>
https://bugzilla.gnome.org/show_bug.cgi?id=670218
These don't really matter, since it's test code, but they do obscure
real leaks in the library.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=666115
Acked-by: Matthias Clasen <mclasen@redhat.com>
Either g_type_register_static_simple (used by G_DEFINE_TYPE_EXTENDED)
and G_IMPLEMENT_INTERFACE use automatic variables for GTypeInfo and
GInterfaceInfo structs, while tutorials and source code often use
static variables. This commit consistently adopts the former method.
https://bugzilla.gnome.org/show_bug.cgi?id=600161
Any flags specified as well as "all" are subtracted from the result,
allowing the user to specify FOO_DEBUG="all,bar,baz" to mean "give me
debugging information for everything except bar and baz".
https://bugzilla.gnome.org/show_bug.cgi?id=642452
These were the last users of the dynamic allocation API.
Keep the uses in glib/tests/mutex.c since this is actually meant to test
the API (which has to continue working, even if it is deprecated).
https://bugzilla.gnome.org/show_bug.cgi?id=660739
All locks are now zero-initialised, so we can drop the G_*_INIT macros
for them.
Adjust various users around GLib accordingly and change the docs.
https://bugzilla.gnome.org/show_bug.cgi?id=659866
The documentation for G_TYPE_CHAR says:
"The type designated by G_TYPE_CHAR is unconditionally an 8-bit signed
integer."
However the return value for g_value_get_char() was just "char" which
in C has an unspecified signedness; on e.g. x86 it's signed (which
matches the GType), but on e.g. PowerPC or ARM, it's not.
We can't break the old API, so we need to suck it up and add new API.
Port most internal users, but keep some tests of the old API too.
https://bugzilla.gnome.org/show_bug.cgi?id=659870
Replace it with g_thread_create_with_stack_size() and a real function
implementation of g_thread_create().
Modify a testcase that was calling g_thread_create_full()
inappropriately (it was using the default values anyway).
G_THREADS_ENABLED still exists, but is always defined. It is still
possible to use libglib without threads, but gobject (and everything
above it) is now guaranteed to be using threads (as, in fact, it was
before, since it was accidentally impossible to compile with
--disable-threads).
https://bugzilla.gnome.org/show_bug.cgi?id=616754
At the same time, also add g_mkdtemp_full and g_dir_make_tmp
variants. The patch also unifies the unique-name-generating
code for all variants of mkstemp and mkdtemp and adds tests
for the new functions.
Based on patches by Paolo Bonzini,
http://bugzilla.gnome.org/show_bug.cgi?id=118563
If we are going to fail an assert, wait for a bit longer before doing so
(up to 5 seconds, if needed).
This is a long-standing Debian patch to fix build failures on really
slow machines.
g_thread_init() causes a hash table to be allocated (in read_aliases).
Since hash tables are now a bit larger, we need to bump one of the
probe sizes to avoid our probe slice being used for the aliases
hash table.
Of course, a proper implementation of close() will just ignore an
invalid parameter silently, and set errno. But apparently the "debug"
version of the Microsoft C library generates some noise in this
case. So avoid that. Thanks to John Emmas for reporting.
These allow applications to give meaningful names to their sources.
Source names can then be used for debugging and profiling, for
example with systemtap or gdb.
https://bugzilla.gnome.org/show_bug.cgi?id=606044
For some reason, even though the tests are linked against libgobject.la
and libgobject.la mentions libglib.la as a dependency, the tests are
running against the system glib instead of the in-tree one.
Adding the libglib.la file as an explicit LDFLAG fixes it.
Re-using glibc's __abort_msg symbol causes linking problems, since the symbol
is declared private. Always use our own__glib_abort_msg symbol to store
assertion messages, to avoid compatibility and linking problems.
Also fix the test case to work with out of tree builds (such as "make
distcheck"), and re-enable it.
https://bugzilla.gnome.org/show_bug.cgi?id=594872
It makes the IBM XL C Compiler (the 'native' non-free compiler
on the AIX 5.3 and 6.1 platform) stop compiling with syntax error.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=581300
Signed-off-by: Javier Jardón <jjardon@gnome.org>
Crash interception/debugging systems like Apport or ABRT capture core dumps for
later crash analysis. However, if a program exits with an assertion failure,
the core dump is not useful since the assertion message is only printed to
stderr.
glibc recently got a patch which stores the message of assert() into the
__abort_msg global variable.
(http://sourceware.org/git/?p=glibc.git;a=commitdiff;h=48dcd0ba)
That works fine for programs which actually use the standard C assert() macro.
This patch adds the same functionality for glib's assertion tests. If we are
building against a glibc which already has __abort_msg (2.11 and later, or
backported above git commit), use that, otherwise put it into our own field
__glib_assert_msg.
Usage:
$ cat test.c
#include <glib.h>
int main() {
g_assert(1 < 0);
return 0;
}
$ ./test
**ERROR:test.c:5:main: assertion failed: (1 < 0)
Aborted (Core dumped)
$ gdb --batch --ex 'print (char*) __abort_msg' ./test core
[...]
$1 = 0x93bf028 "ERROR:test.c:5:main: assertion failed: (1 < 0)"
https://bugzilla.gnome.org/show_bug.cgi?id=594872
These are basic performance test for a couple of basic gobject
primitives:
* construction of simple objects. Simple is a bare gobject derived
class with no properties, signals or interfaces.
* construction of complex objects. Complex is a gobject subclass
with construct properties, normal properties, signals, and
implements an interface.
* run-time type check of complex objects
* signal emissions
Lots of care is taken to try to make the results reproducible. Each
test is run for multible "rounds", where we try to make each round be
"not too short" in order to be significant wrt timer accuracy, but
also "not to long" to make the probability of some other random event
happening on the system (interrupts, other process scheduled, etc)
during the round less likely.
The current target round time is 4 msecs, which was picked without
rigour, but seems small wrt e.g. scheduler time.
For each test we then run the calculated round size for 60 seconds,
and then report the performance based on the minimal time of one
round. The model here is that any random stuff that happens during a
round can only slow it down, there is nothing that can make it go
faster, so the minimal time is the best estimate of how fast one round
goes.
The result is not ideal, even on a "idle" system the results vary
from round to round, but the variation seems to be less than 1%.
So, any performance difference reported by this test over 1% is
probably statistically significant.
Additionally the tests can be run with or without threads being
initialized. The script tests/gobject/run-performance.sh makes
it easy to produce a performance report for the current checkout.
https://bugzilla.gnome.org/show_bug.cgi?id=557100
g_simple_async_result_complete() now checks that it's being run from
the correct main loop, so tests/gio/simple-async-result was failing,
because it called it from outside any main loop. (And gio's pltcheck
was failing because I hadn't added g_main_current_source() to it.)
glib/pcre/pcre_ucp_search_funcs.c, glib/pcre/pcre_valid_utf8.c: add
back missing config.h includes, and this time add them to the copies
in glib/update-pcre/ too so they don't get lost again on the next PCRE
update.
glib/garray.c, glib/gbase64.c: fix signed/unsigned pointer casts
gio/xdgmime/xdgmimeglob.c: remove unused variable
gio/tests/live-g-file.c: fix printf args on x86_64
tests/Makefile.am, tests/regex-test.c: remove redundant -DENABLE_REGEX
* glib/gtestutils.h (g_assert_no_error, g_assert_error): Macros to
assert that a GError is not set, or else is set to a particular
error.
* glib/gtestutils.c (g_assertion_message_error): utility for
those macros
* glib/tests/keyfile.c:
* tests/asyncqueue-test.c:
* tests/bookmarkfile-test.c:
* tests/convert-test.c:
* tests/file-test.c: Use g_assert_error/g_assert_no_error
svn path=/trunk/; revision=7555
2008-08-28 Bastien Nocera <hadess@hadess.net>
Bug 548612 – g_strstr_len() should use memmem when available
* glib/tests/strfuncs.c (test_strstr):
* tests/string-test.c (main): Patch by Paolo Borelli
<pborelli@katamail.com> to move the tests to the right place,
and add more tests
* glib/gstrfuncs.c (g_strstr_len): Fix problem with memmem ignoring
nul-terminators in strings, and using the haystack_len instead
svn path=/trunk/; revision=7409
2008-08-28 Bastien Nocera <hadess@hadess.net>
Bug 548612 – g_strstr_len() should use memmem when available
* configure.in: detect whether memmem is available in the C library
* glib/gstrfuncs.c (g_strstr_len): use memmem for g_strstr_len() if
available in it's available, as it could be optimised by the C library
* tests/string-test.c (main): Add a few tests for g_strstr_len()
svn path=/trunk/; revision=7407
2008-08-08 Ryan Lortie <desrt@desrt.ca>
* tests/markups/fail-32.gmarkup: change  to � since the
former is no longer a failure.
svn path=/trunk/; revision=7328
2008-08-04 Tor Lillqvist <tml@novell.com>
* tests/testglib.c: Avoid warning on Win64 by using gintptr cast
instead if long cast.
svn path=/trunk/; revision=7304
2008-07-21 Emmanuele Bassi <ebassi@gnome.org>
* glib/gbookmarkfile.c:
(bookmark_app_info_new): Do not set the timestamp value
using time(), as it will be overwritten anyway. (#535223,
Michael Meeks)
(parse_application_element),
(bookmark_app_info_dump): Support the "modified" attribute,
which takes an ISO-formatted string instead of a Unix time
stamp, to keep the number of g_strdup_printf() calls to a
minimum.
* glib/gtimer.c:
(g_time_val_to_iso8601): Do not use strftime(): we know
the format and contents of the ISO 8601 date format we
use.
* tests/bookmarks/valid-03.xbel: Add a test file for the
modified attribute.
svn path=/trunk/; revision=7231
2008-07-04 Michael Natterer <mitch@imendio.com>
Bug 541208 – Functions to easily install and use signals without
class struct slot
* tests/gobject/override.c: added tests for the new gsignal
overriding and chaining APIs.
svn path=/trunk/; revision=7158
2008-06-24 Paolo Borelli <pborelli@katamail.com>
Bug 539770 - migrate gstrfunc unit tests to gtest
* tests/strfunc-test.c:
* tests/testglib.c:
* tests/strtoll-test.c:
* tests/strtod-test.c:
* tests/string-test.c:
* tests/Makefile.am:
Removed old tests.
* glib/tests/fileutils.c:
* glib/tests/strfuncs.c:
* glib/tests/Makefile.am:
Added all the old tests migrated to the new unit test framework
and add new unit tests for some of the functions.
svn path=/trunk/; revision=7097
* glib/gtimer.c (g_time_val_from_iso8601): set tv_usec to 0 rather
than 1 when a fraction of a second is not specified
(g_time_val_from_iso8601): calculate a fraction of a second
correctly even in case it does not happen to consist of exactly
six digits; do not allow random data after the ISO 8601 string,
only whitespace
(make g_time_val_to_iso8601): support fractions of a second
Patch by Peter Kjellerstedt
* tests/testglib.c: Update to match
svn path=/trunk/; revision=7057
2008-05-30 Michael Natterer <mitch@imendio.com>
Bug 535628 - test/patterntest.c still includes gpattern.h
directly.
* tests/patterntest.c: don't include "glib/gpattern.h" directly.
Patch from Hiroyuki Ikezoe.
svn path=/trunk/; revision=6964
2008-02-23 Matthias Clasen <mclasen@redhat.com>
* tests/testglib.c: Don't test user directories for being
non-null. (#517084, Yevgen Muntyan)
svn path=/trunk/; revision=6562
2008-02-10 Matthias Clasen <mclasen@redhat.com>
* glib/gtestutils.h: Make the g_test_add macro work with
gcc 4.3
* tests/gobject/paramspec-test.c: Adapt to recent changes in
GParamGType initialization.
svn path=/trunk/; revision=6500
2008-01-29 Sebastian Wilhelmi <wilhelmi@google.com>
* tests/threadpool-test.c (test_thread_pools): Grab
thread_counter_pools LOCK when increasing
leftover_task_counter. Fixes race in test. (#512624, Simon Murray)
svn path=/trunk/; revision=6406
* glib/gchecksum.c (md5_sum_update): fix this; the previous code
gave the wrong md5sum when called in certain ways with buffers
larger than 64 bytes.
(g_checksum_update): remove the unnecessary "length > 1"
restriction
* tests/checksum-test.c: Rewrite this to be much more exhaustive
(and in particular to test the md5_sum_update bugfix).
svn path=/trunk/; revision=6314
2008-01-11 12:55:19 Tim Janik <timj@imendio.com>
* tests/testingbase64.c: added g_base64_encode()/g_base64_decode()
test case by Asbjoern <asbgpe@online.no>. fixed up coding style.
svn path=/trunk/; revision=6292
2007-12-09 Hans Breuer <hans@breuer.org>
* tests/gio-ls.c : adapt to recent api changes
* tests/testglib.c : variable declaration at the beginning of a block
(Lieven van der Heide, #503602)
* win32-fixup.pl : process *.rc.in as well; substitute
LT_CURRENT_MINUS_AGE
* glib/makefile.msc.in : alphabetic sorting of OBJECTS
svn path=/trunk/; revision=6184
2007-12-19 Emmanuele Bassi <ebassi@gnome.org>
* glib/gtimer.c (g_time_val_from_iso8601): Fix the date validation
check. (#503029)
* tests/testglib.c (various_string_tests): Add an invalid date
for testing the above fix.
svn path=/trunk/; revision=6160
2007-12-12 16:06:11 Tim Janik <timj@imendio.com>
* tests/testglib.c: split up tests and reworked code to use
the new test framework.
* tests/Makefile.am: added testglib to TEST_PROGS.
svn path=/trunk/; revision=6103
2007-12-09 Hans Breuer <hans@breuer.org>
* tests/gio-ls.c : (new file) a test program emulating some of 'ls'
* tests/makefile.msc.in : build it (currently on win32)
svn path=/trunk/; revision=6079
2007-12-09 Hans Breuer <hans@breuer.org>
* **/makefile.msc glib/makefile.msc.in : removed -GD to compile
with msvc9 (vs2008) with less complains
* glibconfig.h.win32.in : #define G_HAVE_ISO_VARARGS 1 for
msv8 (vs2005) and above
* glib/gfileutils.c : s/stricmp/_stricmp/
* msvc_recommended_pragmas.h : work around Microsoft's premature
attempt to deprecate the C-Library
* tests/makefile.msc.in : added checksum-test
svn path=/trunk/; revision=6076
2007-12-06 09:27:42 Tim Janik <timj@imendio.com>
* tests/scannerapi.c: added new scanner test from #501654, by
Patrick Hulin with various modifications.
reworked coding style, adapted to new testing framework, fixed
token parser test and use a forked sub process to test
g_scanner_error() output messages.
svn path=/trunk/; revision=6055
2007-12-04 Emmanuele Bassi <ebassi@gnome.org>
* glib/gchecksum.[ch]: Add GChecksum, a generic wrapper around
various hashing algorithms. At the moment, the MD5, SHA-1 and
SHA-256 algorithms are supported. (#443648)
* glib/glib.h:
* glib/Makefile.am:
* glib/glib.symbols: Build glue for GChecksum
* tests/Makefile.am
* tests/checksum-test.c: Add test suite for GChecksum.
svn path=/trunk/; revision=6042
2006-12-03 Ryan Lortie <desrt@desrt.ca>
* tests/hash-test.c (second_hash_test): fix memory leak, add a few
extra sanity tests.
svn path=/trunk/; revision=6025
2007-12-03 Marco Barisione <marco@barisione.org>
* glib/gregex.c:
* glib/gregex.h: Add new error codes for when compilation fails and
make compilation error translatable. (#482313, Morten Welinder)
svn path=/trunk/; revision=6021
2007-11-26 Ryan Lortie <desrt@desrt.ca>
Add new function g_markup_collect_attributes (bug #496847).
* glib/glib.symbols: add g_markup_collect_attributes
* docs/reference/glib/glib-sections.txt:
* glib/gmarkup.h:
* glib/gmarkup.c: add g_markup_collect_attributes and new enumerated
type GMarkupCollectType. Add new error code
G_MARKUP_ERROR_MISSING_ATTRIBUTE that is thrown by the attribute
collector.
svn path=/trunk/; revision=5947
2007-11-23 Matthias Clasen <mclasen@redhat.com>
* glib/gbase64.c (g_base64_encode): Don't refuse to encode
a single byte. (Milan Crha)
* tests/base64-test.c: Test encoding short strings.
svn path=/trunk/; revision=5919
2007-11-21 21:06:47 Tim Janik <timj@imendio.com>
* Makefile.decl: initialize automake variables EXTRA_DIST and
TEST_PROGS for unconditional appending via += in other makefiles.
define recursive test targets: test, test-report, perf-report,
full-report, as described here:
http://mail.gnome.org/archives/gtk-devel-list/2007-November/msg00000.html
* Makefile.am:
* build/win32/vs8/Makefile.am, build/win32/dirent/Makefile.am:
* build/win32/Makefile.am, build/Makefile.am:
* docs/Makefile.am, docs/reference/Makefile.am:
* docs/reference/glib/Makefile.am, docs/reference/gobject/Makefile.am:
* gmodule/Makefile.am, tests/Makefile.am:
* tests/refcount/Makefile.am, tests/gobject/Makefile.am:
* glib/update-pcre/Makefile.am, glib/libcharset/Makefile.am:
* glib/tests/Makefile.am, glib/pcre/Makefile.am:
* glib/gnulib/Makefile.am, gobject/Makefile.am, m4macros/Makefile.am:
* gthread/Makefile.am, glib/Makefile.am:
include $(top_srcdir)/Makefile.decl, adapted EXTRA_DIST assignments.
* glib/tests/Makefile.am: removed example testing rules.
* glib/tests/testing.c: conditionalized performance and slow tests.
* glib/gtestutils.h:
* glib/gtestutils.c: work around g_test_config_vars not changing its
exported value after value assignments, aparently due to symbol aliases.
* glib/gtester.c: fixed off-by-one error which produced junk in logs.
* configure.in: check for python >= 2.4 and provide $PYTHON for scripts.
svn path=/trunk/; revision=5914
* refcount/signals.c:
* refcount/objects.c:
* refcount/objects2.c:
* refcount/closures.c:
* refcount/properties.c:
* refcount/properties2.c: changed namespace prefix from g_test_* to my_test_*
to not clash with newly introduced g_test* API in glib.
svn path=/trunk/; revision=5875
Tue Aug 14 02:06:10 2007 Tim Janik <timj@imendio.com>
* glib/gthread.c (g_once_init_enter_impl): prevent race covered
by g_once_init_enter(), by checking for previous initializations
before entering initialisation branch.
* tests/onceinit.c: added multi-thread/multi-initializer stress test
using unoptimized g_once_init_enter_impl().
svn path=/trunk/; revision=5701
Mon Aug 13 14:21:44 2007 Tim Janik <timj@imendio.com>
* tests/onceinit.c: test g_once_init_*() before and after
g_thread_init() and test concurrency resolution.
svn path=/trunk/; revision=5698
2007-08-08 Matthias Clasen <mclasen@redhat.com>
* glib/gmarkup.c (append_escaped_text): Handle restricted
characters by converting them to numeric character
entities. (#464145, Andreas Monitzer)
* tests/markup-escape-test.c: Add tests for restricted
characters and numeric character entities.
svn path=/trunk/; revision=5684
Thu Jul 12 17:31:08 2007 Tim Janik <timj@imendio.com>
* tests/slice-concurrent.c: beautified output somewhat. fixed long
sleeps by reducing sleep accumulating and using randomized re-scheduling
(which works on UP and SMP). increased possible blocksizes.
svn path=/trunk/; revision=5631
Thu Jul 12 15:46:40 2007 Tim Janik <timj@imendio.com>
* glib/gslice.c: migrate per-thread magazine caches from single-thread
scenario to first thread using GSlice after g_thread_init(); based on
a patch by Tor Lillqvist, fixes#331853.
removed warning about g_thread_init() being called after other glib
functions (in particular g_slice* calls), because GSlice can cope
with this now and the rest of glib is believed to cope as well.
* tests/slice-threadinit.c: new test program which tests GSlice working
across g_thread_init() calls.
svn path=/trunk/; revision=5629
2007-07-09 Loïc Minier <lool@dooz.org>
* tests/refcount/closures.c: (main): Output newlines after thousand
iterations of the inner-loop of the closures test; this helps having
smaller lines and continuously outputting new lines. (#447048).
svn path=/trunk/; revision=5609
2007-06-04 Matthias Clasen <mclasen@redhat.com>
Add support for a number of special directories, as
defined by the xdg-user-dirs specification. (#432651,
Bastien Nocera, Emmanuele Bassi, Michael Natterer)
* glib/glib.symbols:
* glib/gutils.[hc]: Add the GUserDirectory enum and
g_get_user_special_dir(), with implementations based
on the xdg-user-dirs spec and on native interfaces
for Win32 and Carbon.
* configure.in: Add Carbon checks.
* tests/tetsglib.c: Test g_get_user_special_dir().
svn path=/trunk/; revision=5528
2007-06-03 Yevgen Muntyan <muntyan@tamu.edu>
* glib/gregex.c: fixed g_regex_fetch_named* for cases when (?J)
is used inside a pattern (#442265, comment #12).
* tests/regex-test.c: Test it.
svn path=/trunk/; revision=5526
2007-06-03 Yevgen Muntyan <muntyan@tamu.edu>
* glib/gregex.c:
* glib/gregex.h: New functions: g_regex_ref(), g_regex_unref() which
replaces g_regex_free(); g_match_info_get_regex(), g_match_info_get_string();
g_regex_check_replacement().
Made g_match_info_expand_references() accept NULL; changed GRegexEvalCallback
to take only arguments which are likely to be actualy used.
* docs/reference/glib/glib-sections.txt:
* glib/glib.symbols: Added new functions.
* tests/regex-test.c: Test them.
* docs/reference/glib/tmpl/gregex.sgml: Updated GRegexEvalCallback docs.
svn path=/trunk/; revision=5524
2007-05-29 Marco Barisione <marco@barisione.org>
* glib/gregex.c: Fix g_regex_fetch_named() and
g_regex_fetch_named_pos() when G_REGEX_DUPNAMES is used (#434358,
Yevgen Muntyan and #419376, Marco Barisione, patch by Yevgen Muntyan)
svn path=/trunk/; revision=5518
2007-05-11 Matthias Clasen <mclasen@redhat.com>
* glib/goption.c: Allow G_OPTION_ARG_CALLBACK for
G_OPTION_REMAINING. (#437297, Dave Benson)
* tests/option-test.c: Add a test for this.
svn path=/trunk/; revision=5487
2007-04-24 Michael Natterer <mitch@imendio.com>
* gobject/gparamspecs.c (param_string_validate): don't free or
modify static strings, dup them when needed and clear the
G_VALUE_NOCOPY_CONTENTS flag. Fixes bug #432895.
* tests/gobject/paramspec-test.c: test all GParamSpecString
validations with static and allocated strings.
svn path=/trunk/; revision=5454
2007-04-11 Emmanuele Bassi <ebassi@gnome.org>
* glib/ghash.[ch]: Add g_hash_table_get_keys() and
g_hash_table_get_values(), API to retrieve the keys
and values inside an hash table in list form. (#413133)
* glib/glib.symbols: Update symbols.
* tests/hash-test.c: Exercise newly added functions.
svn path=/trunk/; revision=5444
2007-03-22 Chris Wilson <chris@chris-wilson.co.uk>
* glib/gkeyfile.c: Track whether the last key=value pair in a group
is a blank line and during to_data() only insert a new blank line
betweens group in its absence. This allows the beautification of the
GKeyFile and prevents newlines being inserted indefinitely. (#420686)
* tests/keyfile-test.c (test_reload_idempotency): Test that after a
single beautification pass, g_key_file_to_data() does not alter its
input data.
svn path=/trunk/; revision=5431
2007-03-17 Hans Breuer <hans@breuer.org>
* glib/makefile.msc.in glib/pcre/makefile.msc
glib/update-pcre/update.sh : define PCRE_STATIC to reflect the
inclusion of pcre as LIB, not stand-alone DLL. Also set NEWLINE=-1
to match any newline by default, use of ../../build/win32/make.msc
* glib/gregex.h : minimal includes of <glib/*.H> instead of <glib.h>
* glib/gnulib/makefile.msc : make use of ../../build/win32/make.msc
* tests/regex-test.c(verbose): don't pass a string containing '%'
as first parameter to g_print ()
(test_match) : for the unexpected case output pattern and string
escaped
* tests/child-test.c tests/slice-color.c : fix c99ism
* tests/slice-test.c : fix c99ism and gccism
* tests/mapping-test.c tests/base-64-tests.c : don't
#include <unistd.h> unconditionally
* tests/option-test.c : use G_GINT64_CONSTANT() instead of direct LL
* tests/makefile.msc.in : more tests build
svn path=/trunk/; revision=5423
2007-03-06 Matthias Clasen <mclasen@Redhat.com>
* tests/Makefile.am: Apply a patch by Loïc Minier
to fix building with -Wl,-z,defs. (#149144)
svn path=/trunk/; revision=5367
2007-02-16 Soren Sandmann <sandmann@redhat.com>
* tests/sequence-test.c: For move, test moving between two
sequences. Add test for swap.
* glib/gsequence.c: Replace splay tree with a treap.
(check_node): Add checks for the treap invariants.
svn path=/trunk/; revision=5337
2007-02-07 Soren Sandmann <sandmann@daimi.au.dk>
* tests/sequence-test.c (compare_items): Force an arbitrary order
on otherwise identical items.
* glib/gsequence.c: Add comment discussing splay trees vs. other trees.
* glib/gsequence.c (is_end): Add fast path for the common case
when the node is not actually the end node.
svn path=/trunk/; revision=5328
