Similarly to how glib-compile-resources can call xmllint to eliminate
whitespace in XML files to reduce their size inside a GResource, we can
use json-glib-format to achieve the same result.
The mechanism for using json-glib-format is the same, with a separate
environment variable if we want to direct glib-compile-resources to a
version of json-glib-format that is not the one in the PATH.
https://bugzilla.gnome.org/show_bug.cgi?id=794284
Normally, the list of mounts is filtered to exclude mounts in
/run/media/$username where $username is not the current user. However,
root can access all the mounts under /run/media/, regardless of the
username — so there’s no point in filtering out those mounts.
In some cases, filtering them out is harmful. In the case of a system
service which uses GVolumeMonitor, for example, filtering them out means
the service cannot see automounted USB sticks belonging to user
sessions.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793994
Tighten up the validation of application IDs so they are always exactly
D-Bus well-known names. This is a slight change to the accepted format,
but since anyone using the API with an application ID which was
previously valid, but which was not a valid D-Bus well-known name, would
have received an error from D-Bus when their application tried to
register on the bus, I think this break is acceptable.
It will affect any applications which have application IDs which are not
valid D-Bus well-known names, and which use the G_APPLICATION_NON_UNIQUE
flag. From a quick search in Debian Codesearch, no C applications use
that flag.
Update the documentation to use the rules from the D-Bus specification,
including the latest advice discouraging use of hyphens:
https://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names-bus
Update the tests:
• Add the examples from the documentation to validate them.
• Especially the venerable 7-zip.org example.
• Move a couple of tests from expected-failure to expected-success:
they are valid D-Bus well-known names even if they’re a bit weird.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793400
This will make the assertion failure messages a little more useful, and
prevent the assertions being compiled out with G_DISABLE_ASSERT.
Introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793400
- Stop using a custom thread for listening to kqueue(2) events. Instead
call kevent(2) in non blocking mode in a monitor callback. Under the
hood poll(2) is used to figure out if new events are available.
- Do not use a socketpair with a custom protocol requiring 2 supplementary
context switches per event to commicate between multiple threads. Calling
kevent(2), in non blocking mode, to add/remove events is fine from any
context.
- Add kqueue(2) events without the EV_ONESHOT flag. This removes a race
where some notifications were lost because events had to be re-added for
every new notification.
- Get rid of the global hash table and its associated lock and races. Use
the 'cookie' argument of kevent(2) to pass the associated descriptor when
registering an event.
- Fix _kh_file_appeared_cb() by properly passing a monitor instead of a
source to g_file_monitor_emit_event().
- Properly refcount sources.
- Remove a lot of abstraction making it harder to fix the remaining issues.
https://bugzilla.gnome.org/show_bug.cgi?id=739424
If the GNetworkMonitorNetlink is finalised part-way through a dump
(after request_dump() is called, but before finish_dump() is called),
dump_networks was leaked. Fix that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
This should introduce no functional changes. Factor out some common
code, flip some arguments around to use the more conventional (data,
length) order, and move some memory management calls out of
if-blocks.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
By using g_timeout_source_new_seconds(), we can let timer wakeups be
coalesced by the scheduler, and reduce power consumption a bit. This
shouldn’t really affect the accuracy of the network monitoring.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
Previously, the GSource would be attached to whatever GMainContext was
the thread default at the time; but that might no longer be the same as
the default at the time of constructing the GNetworkMonitor.
Save the default from construction time, so that source callbacks are
always invoked in the same GMainContext.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
In doing so, ensure that g_option_context_set_ignore_unknown_options()
is always called if completion is being done.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793597
In this situation:
$ gdbus emit --session --object-path /org/foo/bar --sig<tab><tab><tab>
We will currently insert --signal three times.
We should only do that once.
https://bugzilla.gnome.org/show_bug.cgi?id=793597
Commit faf9440908 made the bash completion more
robust, but in doing so it made the optional --dest argument to `gdbus emit'
mandatory by mistake.
Remove the error case when --dest is not specified. To keep the completion
working, we shuffle the cases around. --dest should be offered up for
completion after --session/--system/--address have been supplied, so we can
complete its argument. Additionally, if --dest isn't specified then we can't
complete --object-path or --signal, so guard these completions accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=793597
When completing, we parse the options that the user has typed so far. Up
until now we've been doing this without ignoring unknown options. This
leads to broken completions when the user has typed an incomplete
parameter.
For example, when doing the following:
$ gdbus emit --session --obj<tab>
We expect --object-path to be completed, but it is currently not. What
happens is that we fail to parse the options, therefore don't act on
--session and so don't connect to the session bus, then we early-exit
because we need to know which bus to operate on for later completions.
Instead we can ignore the half-completed --obj, parse --session, get
connected to the bus and then move on to the later completion code.
https://bugzilla.gnome.org/show_bug.cgi?id=793597
This change increases throughput when copying files for some filesystems
(Modified by Philip Withnall <withnall@endlessm.com> to add more error
handling.)
https://bugzilla.gnome.org/show_bug.cgi?id=791457
It incorrectly said that an error could only be returned if the GVariant
was incorrect for the D-Bus API, but that’s not true: an error will also
be returned if you call it on a closed GDBusConnection.
Clarify that, and mention the actual error codes which are returned.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
If calling g_subprocess_communicate() on a GSubprocess with no
stdout/stderr pipe, a critical warning would be emitted from
g_memory_output_stream_steal_as_bytes(), as it would be called on a NULL
output stream.
Fix that, improve the relevant GIR annotations, and expand the unit
tests to cover it (and various other combinations of flags).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793331
Building against libmount installed into a non-default prefix wasn’t
working, as we were using #include <libmount/libmount.h> rather than
the correct #include <libmount.h> — all the mount.pc pkg-config files
set `Cflags: -I${includedir}/libmount`.
Fixing this while retaining the fallback support for versions of
libmount without a pkg-config file would have been tricky (we would need
to work out a suitable -I flag to set in LIBMOUNT_CFLAGS) to still be
able to use the correct #include path). Thankfully, libmount gained
pkg-config support a long time ago, so I think we can safely drop the
fallback code. In particular, Debian Jessie, Ubuntu Trusty, and CentOS 5
all ship a mount.pc file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793288
If flush_async is deleted by a child class, then calling
g_output_stream_flush_async would leave the GOutputStream in an invalid
state. I'm not aware of any GOutputStream that would be affected by this
issue, but might as well fix it.
https://bugzilla.gnome.org/show_bug.cgi?id=738277
g_variant_get_objpathv() doesn’t exist. The code actually meant
g_variant_get_objv().
This fixes a leak with `ao`-type properties in generated code.
Previously they wouldn’t be freed; now the container is (correctly)
freed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=770335
res_query() uses global state in the form of the struct __res_state
which contains the contents of resolv.conf (and other things). On Linux,
this state seems to be thread-local, so there is no problem. On OS X,
however, it is not, and hence multiple res_query() calls from parallel
threads will compete and return bogus results.
The fix for this is to use res_nquery(), introduced in BIND 8.2, which
takes an explicit state argument. This allows us to manually store the
state thread-locally. If res_nquery() isn’t available, we fall back to
res_query(). It should be available on OS X though. As a data point,
it’s available on Fedora 27.
There’s a slight complication in the fact that OS X requires the state
to be freed using res_ndestroy() rather than res_nclose(). Linux uses
res_nclose().
(See, for example, the NetBSD man page:
https://www.unix.com/man-page/netbsd/3/res_ninit/. The Linux one is
incomplete and not so useful:
http://man7.org/linux/man-pages/man3/resolver.3.html.)
The new code will call res_ninit() once per res_nquery() task. This is
not optimal, but no worse than before — since res_query() was being
called in a worker thread, on Linux, it would implicitly initialise the
thread-local struct __res_state when it was called. We’ve essentially
just made that explicit. In practical terms, this means a
stat("/etc/resolv.conf") call per res_nquery() task.
In future, we could improve this by using an explicit thread pool with
some manually-created worker threads, each of which initialises a struct
__res_state on spawning, and only updates it on receiving
the #GResolver::reload signal.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792050
Some projects use child schemas in an odd way: they link children which
already have their path pre-defined. This causes the child schema (and
its keys) to be printed out twice:
- once because it is, itself, a non-relocatable schema
- once, as a recursion from its parent
We can avoid this by not recursing into child schemas that are
non-relocatable (on the assumption that they will be enumerated
elsewhere).
https://bugzilla.gnome.org/show_bug.cgi?id=723003
g_data_input_stream_read_upto() was introduced in 2.26; now it’s GLib
2.56, we can probably deprecate the old versions (since the handling of
consuming the stop character differs between the sync and async versions
of it).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=584284
