This commit only looks at the `Returns:` lines in the documentation, and
has examined all of them in the file. Function arguments have not been
checked.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2227
This should introduce no API changes; there are public functions
exported by `GDBusConnection` which still have some (incorrectly)
`volatile` arguments, but dropping those qualifiers would be an API
break.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
In the D-Bus wire protocol, the handle type (G_VARIANT_TYPE_HANDLE, h)
is intended to be an index/pointer into the implementation's closest
equivalent of GUnixFDList: its numeric value has no semantic meaning
(in the same way that the numeric values of pointers have no semantic
meaning), but a handle with value n acts as a reference to the nth fd
in the fd list.
GDBus provides a fairly direct mapping from the wire protocol to the
C API, which makes it technically possible to attach and use fds
without ever referring to them in the message body, and some
GLib-centric D-Bus APIs rely on this.
However, the other major implementations of D-Bus (libdbus and sd-bus)
transparently replace file descriptors with handles when building
messages, and transparently replace handles with file descriptors when
parsing messages. This means they cannot implement D-Bus APIs that do
not follow the conventional meaning of handles as indexes/pointers into
an equivalent of GUnixFDList.
For interoperability, we should encourage D-Bus API designers to follow
the convention, even though code written against GDBus doesn't strictly
need to do so.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Add a note to the documentation of
`g_dbus_connection_signal_unsubscribe()`, `g_bus_unwatch_name()` and
`g_bus_unown_name()` warning about the need to continue iterating the
caller’s thread-default `GMainContext` until the
unsubscribe/unwatch/unown operation is complete.
See the previous few commits and #1515 for an idea of the insidious bugs
that can be caused by not iterating the `GMainContext` until
everything’s synchronised.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
`CallDestroyNotifyData` never uses that `GMainContext`, and holding a
ref to it could cause reference count cycles if the `GMainContext` is no
longer being iterated.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This just removes a now-redundant intermediate array. This means that
the `SignalSubscriber` instances are now potentially freed a little
sooner, inside the locked segment, but they are already careful to only
call their `user_data_free_func` in the right thread. So that should not
deadlock.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #978
Instead of storing a copy of the `callback` and `user_data` from a
`SignalSubscriber` in a `SignalInstance` struct (which is the closure
for signal callback data as it’s sent from the D-Bus worker thread to
the thread which originally subscribed to a signal), store a strong
reference to the `SignalSubscriber` struct itself.
This keeps the `SignalSubscriber` alive until the emission is
complete, which ensures that the `user_data` is not freed prematurely.
It also slightly reduces the allocation size of `SignalInstance` (not
that it matters).
This is threadsafe because the fields in `SignalSubscriber` are all
immutable after construction.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #978
Tie the destruction of the `user_data` to the destruction of the
`SignalSubscriber` struct. This is tidier, and ensures that the fields
in `SignalSubscriber` are all immutable after being set, so the
structure can safely be used across threads without locking.
It doesn’t matter which thread we call `call_destroy_notify()` in, since
it always defers calling `user_data_free_func` to the user-provided
`GMainContext`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #978
The `SignalSubscriber` structs contain the callback and `user_data` of each
subscriber to a signal, along with the `guint id` token held by that
subscriber to identify their subscription. There are one or more
`SignalSubscriber` structs for a given signal match rule, which is
represented as a `SignalData` struct.
Previously, the `SignalSubscriber` structs were stored in a `GArray` in
the `SignalData` struct, to reduce the number of allocations needed
when subscribing to a signal.
However, this means that a `SignalSubscriber` struct cannot have a
lifetime which exceeds the `SignalData` which contains it. In order to
fix the race in #978, one thread needs to be able to unsubscribe from a
signal (destroying the `SignalData` struct) while zero or more other
threads are in the process of calling the callbacks from a previous
emission of that signal (using the callback and `user_data` from zero or
more `SignalSubscriber` structs). Multiple threads could be calling
callbacks because callbacks are invoked in the `GMainContext` which
originally made a subscription, and GDBus supports subscribing to a
signal from multiple threads. In that case, the callbacks are dispatched
to multiple threads.
In order to allow the `SignalSubscriber` structs to outlive the
`SignalData` which contained their old match rule, store them in a
`GPtrArray` in the `SignalData` struct, and refcount them individually.
This commit in itself should make no functional changes to how GDBus
works, but will allow following commits to do so.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #978
With debug enabled, g_dbus_connection_call_done() will throw a
g_warning() if the call failed (on purpose or not) while trying to the
serial of a non-existant reply.
(/builds/GNOME/glib/_build/gio/tests/gdbus-connection:26921): GLib-GIO-CRITICAL **: 10:10:16.311: g_dbus_message_get_reply_serial: assertion 'G_IS_DBUS_MESSAGE (message)' failed
When compiling GLib with `-Wsign-conversion`, we get various warnings
about the atomic calls. A lot of these were fixed by
3ad375a629, but some remain. Fix them by
adding appropriate casts at the call sites.
Note that `g_atomic_int_{and,or,xor}()` actually all operate on `guint`s
rather than `gint`s (which is what the rest of the `g_atomic_int_*()`
functions operate on). I can’t find any written reasoning for this, but
assume that it’s because signedness is irrelevant when you’re using an
integer as a bit field. It’s unfortunate that they’re named a
`g_atomic_int_*()` rather than `g_atomic_uint_*()` functions.
Tested by compiling GLib as:
```
CFLAGS=-Wsign-conversion jhbuild make -ac |& grep atomic
```
I’m not going to add `-Wsign-conversion` to the set of default warnings
for building GLib, because it mostly produces false positives throughout
the rest of GLib.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1565
This commit changes a comment in _g_dbus_worker_do_read_cb() to be
slightly more useful. At least in my experience debugging an
intermittent unit test failure in another project, this failure
condition occurred because although g_test_dbus_down() ensures that the
session GDBusConnection has exit-on-close set to FALSE before killing
its dbus-daemon, there was still a GDBusConnection on the system bus
which hit this failed read code path, because we had
DBUS_SYSTEM_BUS_ADDRESS set to the address of the #GTestDBus daemon, to
appease libudisks.
Also, make a few other minor improvements to the docs.
Using the generic marshaller has drawbacks beyond performance. One such
drawback is that it breaks the stack unwinding from the Linux kernel due
to having unsufficient data to walk past ffi_call_unixt64. That means that
performance profiling by application developers looks grouped among
seemingly unrelated code paths.
While we can't fix the kernel unwinding here, we can provide proper
c_marshallers and va_marshallers for objects within Gio so that
performance profiling of applications is more reliable.
Related to GNOME/Initiatives#10
Right now this can only be set at construction but not read back.
That seems unnecessarily restrictive, and we'll need to read these
flags from outside of gdbusconnection.c in the next commit, so let's
just make it public.
https://gitlab.gnome.org/GNOME/glib/issues/1620
There's a race condition somewhere in GTestDBus that can result in
the next test being started at a time when g_bus_get() would still
return the connection that is in the process of closing. This can
be reproduced reasonably reliably by running the gapplication test
10K times in a loop.
Instead of relying on waiting for the weak reference to be released,
we can force the issue by clearing it.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768996
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=894677
It incorrectly said that an error could only be returned if the GVariant
was incorrect for the D-Bus API, but that’s not true: an error will also
be returned if you call it on a closed GDBusConnection.
Clarify that, and mention the actual error codes which are returned.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
The g_dbus_connection_call() documentation doesn’t make it clear that
the reply type is always a tuple.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Where we were already treating GHashTables as sets, modify them to use
the set-specific APIs g_hash_table_add() and g_hash_table_contains(), to
make that usage more obvious and less prone to being broken.
Heavily based on patches by Garrett Regier <garrettregier@gmail.com>.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749371
g_dbus_connection_call_internal() accesses the user data it passes to
g_dbus_connection_send_message_with_reply() after the call. That data
might be freed already in the case that the callback is called
immediately.
Fix this by removing the 'serial' field from the user data altogether
and fetch the serial from the message in the callback.
https://bugzilla.gnome.org/show_bug.cgi?id=748263
Some annotations I made while trying to debug bug #781847. They
introduce no behavioural changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Actually, Unicode changes to this file got reverted in
2d56c49b10. Also, there is
"No such interface '%s'" string already, so we avoid
breaking the string freeze.
This highlighted a bug in GDBusConnection, where an interface name was
not included in a message referring to it.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=780032
If we have an input parameter (or return value) we need to use (nullable).
However, if it is an (inout) or (out) parameter, (optional) is sufficient.
It looks like (nullable) could be used for everything according to the
Annotation documentation, but (optional) is more specific.
This commit broke some tests, and I don't have the time
to fix up all the expected output, so I'll revert the changes
to the affected files for now.
This needs to be redone with the necessary test fixes.
