Back in the far-off twentieth century, it was normal on unix
workstations for U+0060 GRAVE ACCENT to be drawn as "‛" and for U+0027
APOSTROPHE to be drawn as "’". This led to the convention of using
them as poor-man's ‛smart quotes’ in ASCII-only text.
However, "'" is now universally drawn as a vertical line, and "`" at a
45-degree angle, making them an `odd couple' when used together.
Unfortunately, there are lots of very old strings in glib, and also
lots of new strings in which people have kept up the old tradition,
perhaps entirely unaware that it used to not look stupid.
Fix this by just using 'dumb quotes' everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=700746
When looking up signals by name (to connect, for example) and the named
signal cannot be found on the given instance, report the type of the
instance.
This is quite a lot more useful as a diagnostic message than only a
memory address.
https://bugzilla.gnome.org/show_bug.cgi?id=694350
We need to keep a reference to the handler in the fast path, just like
in the slow path, otherwise if another thread disconnects the handler
we may destroy the closure while we're using it without the lock held.
We also move the freeing of the instance to after the emission is totally
done as the handler_unref_R (and the tracepoint) reference it.
https://bugzilla.gnome.org/show_bug.cgi?id=694253
handler_ref and handler_unref_R are always called with the signal
lock held. This is obvious for handler_unref_R as it even sometimes
drops this lock, and can be verified quickly for handler_ref by looking
at all call sites.
This improves the performace about 6% on the emit-handled and the
emit-handled-generic tests.
https://bugzilla.gnome.org/show_bug.cgi?id=694253
This is the bug that has been causing segfaults and criticals when accel
keys are used to close windows via GtkUIManager.
The main cause of this problem was a mistake made in the original patch
when modifying the handler_lookup() to take the extra 'closure'
parameter. The original check used was:
if (handler->sequential_number == handler_id ||
(closure && handler->closure == closure))
It was called to find a particular closure like so:
handler_lookup (instance, 0, closure, &signal_id);
The problem is that the check will return if either the signal ID or
closure matches (if a closure was given). The calling code assumes 0 to
be an invalid signal ID which will match no handlers, but unfortunately
the rest of gsignal code uses this to denote a signal that has already
been disconnected. The result is that this function was searching for a
matching closure _or_ the first already-disconnected handler. When it
found the already-disconnected handler, we'd get criticals and crashes.
The condition has been corrected; it now ignores the handler_id
parameter if the closure parameter is non-NULL.
While we're in here, change the lifecycle of the invalidation notify to
be easier to understand.
Before, the notify was removed when the last reference on the handler
dropped. This could happen in very many situations; often at the end of
an emission. Instead, we now tie the registration of the notifier to
the lifecycle of the signal connection. When the signal is disconnected
we remove the notification, even if other references are held (eg:
because it is currently being dispatched).
https://bugzilla.gnome.org/show_bug.cgi?id=690118
Modify gsignal to automatically disconnect a GClosure that becomes
invalid (in the g_closure_invalidate() sense).
Previously, when g_signal_connect_object() was used with a GObject as
the user_data and that object was destroyed, the handler would no longer
be called but the signal handler was itself was not disconnected (ie:
the bookkeeping data was kept around).
The main effect of this patch is that these signal handlers will now
be automatically disconnected (and fully freed).
The documentation for g_signal_connect_object() has anticipated this
change for over 10 years and has advised the following workaround when
disconnecting signal handlers connected with g_signal_connect_object():
if (g_signal_handler_is_connected (instance, id))
g_signal_handler_disconnect (instance, id);
If your code follows this practice then it will continue to work.
If your code never disconnects the signal handler then it was wasting
memory before (and this commit fixes that).
If your code unconditionally disconnects the signal handler then you
will start to see (harmless) g_critical() warnings about this and you
should fix them.
https://bugzilla.gnome.org/show_bug.cgi?id=118536
If the optimization is used for only having one closure handling a
signal emission, then hooks will not be run, so it should be disabled
when an emission hook is added.
https://bugzilla.gnome.org/show_bug.cgi?id=671918
The trace of the signal emission of the was calculating the instance
type after the instance was unrefed. Fix this by keeping the instance type around.
When there is only one closure handling a signal emission and
it doesn't have a bunch of complicated features enabled we
can short circuit the va_args collection into GValues and call the
callback via the va_marshaller directly.
https://bugzilla.gnome.org/show_bug.cgi?id=661140
If the signal argumment types matches a built in standard
marshaller we use the va_marshaller for that, and also the
normal marshaller if NULL was specified (as its faster than
the generic one).
This lets you set a va_marshaller on your signal which will be
propagated to all closures for the signal. Also, automatically
uses the generica va_marshaller if you specify a NULL c_marshaller.
https://bugzilla.gnome.org/show_bug.cgi?id=661140
This means we're not abusing the notifiers for meta_marshallres,
and we're able to later cleanly add other fields to GClosure.
We still have to leave the ABI intact for the GClosure->meta_marshal
bit, as old G_CLOSURE_N_NOTIFIERS macro instances still accesses it.
However, we always set it to zero to keep those macros working.
https://bugzilla.gnome.org/show_bug.cgi?id=661140
Similar to G_PARAM_DEPRECATED. It will warn only for users of the
signals, so a signal can still be emited without warning, for
compatibility reasons.
Apparently, there is no way user flags could have been used before,
so that shouldn't break anyone.
https://bugzilla.gnome.org/show_bug.cgi?id=663581
To help cross compilation, don't use glib-genmarshal in our
build. This is easy now that we have g_cclosure_marshal_generic().
In gobject/, add gmarshal.[ch] to git (making the existing entry
points stubs).
In gio/, simply switch to using g_cclosure_marshal_generic().
https://bugzilla.gnome.org/show_bug.cgi?id=652168
In some cases, signal arguments have to be collected, even if there are i
no signal handlers connected (e.g. for GVariant parameters, where collection
consumes a floating variant).
Based on a patch by Christian Persch.
Bug #643624.
This adds static markers and systemtap tapsets for:
* type creation
* object lifetimes (creation, ref, unref, dispose, finalize)
* signal creation and emission
Signal emissions and finalization marker have a corresponding
*_end (or *-end in dtrace) version that is when the corresponding
operation is finished.
https://bugzilla.gnome.org/show_bug.cgi?id=606044
The reason we need to enforce this is that the GTypeValueTable
documentation explicitly states that memory is memset to 0 when the
value_init function is called.
https://bugzilla.gnome.org/show_bug.cgi?id=603590
Makes g_signal_emit_valist from 15% to 20% faster.
Results reported from profiling the pan newsreader which uses a variant
of simple and complex signal emissions (i.e no args or various args)
https://bugzilla.gnome.org/show_bug.cgi?id=603590
2009-03-13 Kristian Rietveld <kris@imendio.com>
* gsignal.c (signal_lookup_closure): when defaulting to the only
item in the array, check if this is indeed the default closure.
(patch by Tim Janik).
svn path=/trunk/; revision=7979
2008-07-21 Michael Natterer <mitch@imendio.com>
Reviewed by Tim Janik:
* gsignal.c (g_signal_chain_from_overridden_handler): allocate
the temp GValue array with GSLice.
(g_signal_emit_valist): dito. Remove optimization/obfuscation of
allocating up to 16 GValues on the stack and always use GSLice.
svn path=/trunk/; revision=7229
2008-07-04 Michael Natterer <mitch@imendio.com>
Bug 541208 – Functions to easily install and use signals without
class struct slot
* gobject.symbols
* gsignal.[ch] (g_signal_new_class_handler): the same as
_gtk_binding_signal_new(), to install signals with a callback
instead of a class struct slot as class closure.
The next two functions are C convenience and much easier to use
than the generic overriding and chaining APIs which are intended
primarily for language bindings:
(g_signal_override_class_handler): to override a signal with a
callback instead of a class struct slot.
(g_signal_chain_from_overridden_handler): to chain up from a
signal without class struct slot. The API is similar to
g_signal_emit().
svn path=/trunk/; revision=7157
2008-06-22 Michael Natterer <mitch@imendio.com>
* *.c: remove trailing whitespace from newly added gtk-doc
comments and reformatted some where they contained overly long or
ill-formatted lines.
svn path=/trunk/; revision=7090
2008-06-22 Michael Natterer <mitch@imendio.com>
* *.c: moved includes back to the top of the files (before gtk-doc
SECTION comments). Add "config.h" in all files and move system
included before glib includes. Remove trailing whitespace from
SECTION comments and did some reformatting where lines were overly
long, no documentation content was changed.
svn path=/trunk/; revision=7089
