Commit Graph

15844 Commits

Author SHA1 Message Date
Matthias Clasen
1102e6f9ca Allow property actions to invert booleans
This can be handy when you want to change the sense of a toggle
in the UI without rewriting the underlying logic. Currently, this
is just exposed as a construct-only property. We may add a
convenience wrapper or a special !property syntax for this later.

https://bugzilla.gnome.org/show_bug.cgi?id=728489
2015-06-10 21:59:28 -04:00
Matthias Clasen
fb1e5ff04b Fix deprecation notice
GSimpleAsyncResult has not been deprecated all that long.
2015-06-09 19:18:49 -04:00
Simon McVittie
b701c3c608 Regression test for falling back to autolaunch: and XDG_RUNTIME_DIR/bus
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=747941
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
2015-06-09 18:17:25 +01:00
Simon McVittie
32492c6ab0 GDBus: try XDG_RUNTIME_DIR/bus before resorting to dbus-launch
This is the right thing to do for the "a session is a user-session"
model implemented in dbus 1.9.14, which is described in
<http://lists.freedesktop.org/archives/dbus/2015-January/016522.html>.

It also resembles sd-bus' behaviour, although sd-bus will only try
kdbus and XDG_RUNTIME_DIR/bus, and never runs dbus-launch.

On systems following the more traditional "a session is a login-session"
model, X_R_D/bus won't exist, so it is harmless to check for it before
falling back to X11 autolaunching. Again, this matches the behaviour
of current libdbus and sd-bus versions.

Now that we do this, g_test_dbus_unset() needs to clear XDG_RUNTIME_DIR
as well as everything else.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=747941
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
2015-06-09 18:17:16 +01:00
Simon McVittie
0d3f56e31c g_dbus_address_connect: specifically use dbus-launch for autolaunch:
This only alters what happens if we specifically connect to
"autolaunch:", for instance via "DBUS_SESSION_BUS_ADDRESS=autolaunch:".
We will still potentially try other platform-specific things if
DBUS_SESSION_BUS_ADDRESS is unset. There are currently no other
platform-specific things, so there is no practical difference yet,
but I'm about to add a more-preferred fallback path before autolaunch.

This matches libdbus' behaviour and the D-Bus Specification, in which
the autolaunch: transport specifically means X11 autolaunch
(as implemented by "dbus-launch --autolaunch") on Unix, or a
shared-memory-based protocol on Windows. Other platform-specific
transports or default/fallback modes, including launchd on Mac OS X
and XDG_RUNTIME_DIR/bus on Unix, are not part of "autolaunch:".

It's rather unfortunate that the same name means two different
platform-specific mechanisms, specific to different platforms -
if they were added today I'd call them x11: and windows-shm: or
something - but it's been like this since 2007 so it's too late now.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=747941
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
2015-06-09 18:17:01 +01:00
Simon McVittie
bf181a3ac7 regex: if PCRE is 8.34 or later, disable auto-possessification for DFA
Normally, recent PCRE behaves as if certain patterns were replaced
by a more "possessive" pattern that gives the same answer for normal
regex matching, but is more efficient. However, the modified pattern
produces fewer results under DFA. If we want the full set of results
we have to apply PCRE_NO_AUTO_POSSESS, and that's a compile-time flag.

This currently only affects a system PCRE, but would also work fine for
an internal PCRE 8.34 or later if the embedded copy is updated.

Bug: https://bugzilla.gnome.org/show_bug.cgi?id=733325
Reviewed-by: Christian Persch <chpe@gnome.org>
2015-06-09 18:15:28 +01:00
Christophe Fergeau
f45ceb838d gapplication: Make sure --help output is translated
Currently, applications using g_application_add_main_option_entries()
won't get translated entries in --help output. We need to call
g_option_group_set_translation_domain() with a NULL domain to ensure that the
default application gettext domain (ie the one passed to the
textdomain() call) will be used for the main entries passed by the
application.

If we want to allow more flexibility on which gettext domain should be
used for these entries, new API will be needed.

https://bugzilla.gnome.org/show_bug.cgi?id=750322
2015-06-09 13:47:41 +02:00
Philip Withnall
6cd1f8b40f gsettings: Document GSettings build system integration
Add a new section to the main GSettings documentation which documents
the best practices for integrating GSettings into an autoconf/automake
build system using the GLIB_GSETTINGS macro.

Some of this material was adapted from the migrating-gconf.xml guide.

https://bugzilla.gnome.org/show_bug.cgi?id=741788
2015-06-09 08:28:00 +01:00
Philip Withnall
723961b749 gsettings: Expand documentation default value l10n
Mention context, translation category, and the need for syntactic
validity of the translated values.

https://bugzilla.gnome.org/show_bug.cgi?id=741788
2015-06-09 08:28:00 +01:00
Xavier Claessens
73a71d6a43 doc: Add missing GTlsDatabaseClass
https://bugzilla.gnome.org/show_bug.cgi?id=750573
2015-06-08 16:04:53 -04:00
Matthias Clasen
1405eeeed7 Add registry helpers to the docs 2015-06-05 19:13:19 -04:00
Руслан Ижбулатов
e5e6c25c88 Bump W32 Registry API 'Since:' version
https://bugzilla.gnome.org/show_bug.cgi?id=734888
2015-06-05 18:05:09 -04:00
Руслан Ижбулатов
6579c87bd2 Make W32 registry API compatible with MSVC
* Only check __OBJECT_ATTRIBUTES_DEFINED and __UNICODE_STRING_DEFINED
  on MinGW (MSVC doesn't have these)
* MSVC: disable:4005 when including windows.h and ntstatus.h
* Move NTAPI cconv into the parens with the NtQueryKeyFunc
* Fix return values in some functions

https://bugzilla.gnome.org/show_bug.cgi?id=734888
2015-06-05 18:01:43 -04:00
Руслан Ижбулатов
1ac5b92c2f Add W32 Registry reading API to gio
https://bugzilla.gnome.org/show_bug.cgi?id=734888
2015-06-05 18:01:43 -04:00
Руслан Ижбулатов
2a71f187d7 Make GWin32AppInfo MSVC-compatible - use G_VA_COPY
https://bugzilla.gnome.org/show_bug.cgi?id=666831
2015-06-05 16:17:33 -04:00
Руслан Ижбулатов
4d800e4d86 GWin32AppInfo rewrite
- On first call scan the registry, collect information about URI protocols,
  file extensions, applications and handlers, store that as a set of
  interconnected structures in several hash tables
- Watch the registry keys, re-scan the registry when any one of them changes.

https://bugzilla.gnome.org/show_bug.cgi?id=666831
2015-06-05 16:17:33 -04:00
Mikhail Zabaluev
5bc0bc2fde Added g_utf8_validate() to UTF-8 performance testing
https://bugzilla.gnome.org/show_bug.cgi?id=738504
2015-06-05 15:36:13 -04:00
Matthias Clasen
007f6684c5 Add index for new api 2015-06-05 15:27:59 -04:00
Matthias Clasen
01e9302673 Add new API to docs 2015-06-05 15:27:25 -04:00
Ryan Lortie
cb7020af5e GSettings: deprecate g_settings_list_keys()
This is now possible with g_settings_schema_list_keys().

https://bugzilla.gnome.org/show_bug.cgi?id=740308
2015-06-05 15:26:34 -04:00
Ryan Lortie
6cf867fb2a gsettings tests: use g_settings_schema_list_keys()
Stop using g_settings_list_keys() because soon it will be deprecated.

https://bugzilla.gnome.org/show_bug.cgi?id=740308
2015-06-05 15:24:02 -04:00
Ryan Lortie
bb8eea6148 gsettings tool: use schema for listing keys
Use the newly added g_settings_schema_list_keys() API instead of
g_settings_list_keys() in order to list keys.

Doing this allows the 'list-keys' command to work without creating a
GSettings object, which is more efficient.  It also means that we don't
have to provide a (meaningless and ignored) path when listing keys on
relocatable schemas.

While we're at it, update the 'range' command not to require creation of
a GSettings object, in a similar way.

https://bugzilla.gnome.org/show_bug.cgi?id=740308
2015-06-05 15:24:02 -04:00
Ryan Lortie
82fcfeb3b0 GSettingsSchema: add g_settings_schema_list_keys()
The list of keys in a GSettings object depends entirely on the schema,
so it makes sense to expose this API there.

Move the implementation out of gsettings.c and into gsettingsschema.c,
replacing the earlier with a simple call to the new location.

We don't do the same for children because the children can change.

https://bugzilla.gnome.org/show_bug.cgi?id=740308
2015-06-05 15:24:02 -04:00
Patrick Griffis
36e093a31a Implement GNotification on OSX
https://bugzilla.gnome.org/show_bug.cgi?id=747146
2015-06-05 14:55:58 -04:00
Patrick Griffis
89058e8a9b configure: Require OSX >= 10.9
https://bugzilla.gnome.org/show_bug.cgi?id=747146
2015-06-05 14:55:58 -04:00
Ryan Lortie
9e8f4d4736 kqueue: add a bit of extra paranoia on cancel
Cancellation of GPollFileMonitor is now handled correctly (in the sense
that no further signals will follow) but let's be extra paranoid and
disconnect our handler anyway, for good measure.

https://bugzilla.gnome.org/show_bug.cgi?id=739424
2015-06-05 14:55:01 -04:00
Ryan Lortie
a367921d44 gpollfilemonitor: send 'changes done' for creates
The new rules of GFileMonitor says that users should expect to see a
CHANGES_DONE_HINT following a CREATED as well as CHANGED.

https://bugzilla.gnome.org/show_bug.cgi?id=739424
2015-06-05 14:55:01 -04:00
Ryan Lortie
62e5ee5514 gpollfilemonitor: don't emit after cancellation
GPollFileMonitor emits CHANGES_DONE_HINT after CHANGED signals, but it
doesn't check to ensure that the file monitor wasn't cancelled before it
does that.

If the original signal caused the monitor to be unreffed, cancelled and
destroyed, we would still end up emitting an extra signal on it.

Avoid that by checking first for cancellation.

https://bugzilla.gnome.org/show_bug.cgi?id=739424
2015-06-05 14:55:01 -04:00
Mikhail Zabaluev
16190d2dcd glib/genviron.c, GSubprocessLauncher: ain't no "filename encoding"
Removed all mentions of GLib file name encoding referring to
the environment strings. The env var content has no defined relation
to GLib's notion of filename encoding, or any encoding whatsoever.
It would be wrong to pass all UTF-8 strings through
g_filename_from_utf8() in order to put them into the environment,
for one thing.

https://bugzilla.gnome.org/show_bug.cgi?id=738185
2015-06-05 14:53:34 -04:00
Jan Safranek
b31a873fb3 GDBus: Add new call flag to allow interactive authorization
DBus has recently introduced new message flag
DBUS_HEADER_FLAG_ALLOW_INTERACTIVE_AUTHORIZATION, which tells that
caller is willing to wait for unspecified amount of time for the call
to return, as the service may perform interactive authorization (e.g.
using polkit).

https://bugzilla.gnome.org/show_bug.cgi?id=739616
2015-06-05 14:35:34 -04:00
Ryan Lortie
865ce79ce0 GActionGroupExporter: flush queue on requests
In order to maintain a logical stream of events, we need to make sure we
flush and queued change notifications before responding to any requests
for information from clients.

If we don't do this, it's possible that we emit an 'add' event that was
queued at the time of a 'DescribeAll' call _after_ the reply to that
call (which already contained the description of the new action).

In practice, this is not only logically incorrect, but it can also cause
problems.  If a change to action 'state' or 'enabled' occurs after the
DescribeAll but before the signal has been dispatched, it will be
ignored because an 'add' signal is already pending.  When that add
signal is sent, it will contain the correct data, but the receiver will
ignore it because it already saw the action in the DescribeAll reply.

https://bugzilla.gnome.org/show_bug.cgi?id=749693
2015-06-05 12:36:36 -04:00
Ryan Lortie
eeae7950fc GActionGroup: fix an annotation
.get_action_state_type() does not return a copy.

We remove the annotation entirely because it is evident from the 'const'
on the return type.

https://bugzilla.gnome.org/show_bug.cgi?id=730168
2015-06-05 12:36:09 -04:00
Matthias Clasen
96df2727f4 win32: Make g_content_type_get_mime_type work for directories
Now that we are using inode/directory for directories, handle
this case in g_content_type_get_mime_type() as well.
2015-06-05 12:30:15 -04:00
Руслан Ижбулатов
5f0665cbbc W32: Special treatment for inode/directory mime/type
This is a hack for GLocalFileInfo to correctly get icons for directories.
Without this change content type for any W32 directory is NULL
(because there's no registry entry for "inode/directory" by default,
and in any way there's no file extension that means "directory" to put there),
and GLocalFileInfo uses content type to grab icons.

https://bugzilla.gnome.org/show_bug.cgi?id=748727
2015-06-05 12:28:09 -04:00
Matthias Clasen
9931336d2d win32: Return proper icon names
The code here was returning gtk-directory and similar names as
fallback, with a comment claiming that these are 'builtin gtk'.
But they aren't, anymore, so just return the standard names.
2015-06-05 12:26:41 -04:00
Matthias Clasen
c20f3b239c Fix a markup confusion
"0." at the beginning of a line is interpreted as a numeric list
by the gtk-doc markdown parser, so be careful to avoid that.

https://bugzilla.gnome.org/show_bug.cgi?id=750399
2015-06-05 11:54:40 -04:00
Matthias Clasen
07b3595c23 Trivial: fix a typo
Pointed out in https://bugzilla.gnome.org/show_bug.cgi?id=750399
2015-06-05 11:54:40 -04:00
Philip Withnall
c94e4c6f03 gsettings: Add a documentation section on relocatable schemas
https://bugzilla.gnome.org/show_bug.cgi?id=741788
2015-06-05 13:02:33 +01:00
Stefan Ekenberg
338741fff5 Prevent race condition in g_io_condition_get_type
Prevents race condition in function g_io_condition_get_type by ensuring
that the initialization section for 'etype' is executed only once
during a program's life time, and that concurrent threads are blocked
until initialization completes. This changes solves the problem that
concurrent threads could execute the check 'etype == 0' before any of
them had initialized it, which in turn meant that multiple threads
would then attempt to register the "GIOCondition" type.

https://bugzilla.gnome.org/show_bug.cgi?id=750386
2015-06-04 22:30:50 -04:00
Matthias Clasen
6c43b6a21a Trivial: fix a comment typo 2015-06-04 19:25:42 -04:00
Balázs Úr
cac0a49ca0 Updated Hungarian translation 2015-06-04 21:03:10 +00:00
Garrett Regier
bdc3f149ec binding: Simplify the default transform func
https://bugzilla.gnome.org/show_bug.cgi?id=750369
2015-06-03 17:46:57 -07:00
Garrett Regier
ace7f6861e binding: Remove conditional from the default transform function
Avoiding checking for INVERT_BOOLEAN each and
instead choose the correct function in constructed().

https://bugzilla.gnome.org/show_bug.cgi?id=750369
2015-06-03 17:46:57 -07:00
Garrett Regier
36593a3aba binding: Remove GObject data usage
It isn't actually doing anything, instead it is
being managed without actually being used.
This has the result that GBinding is now more
thread-safe.

https://bugzilla.gnome.org/show_bug.cgi?id=745013
2015-06-03 17:46:57 -07:00
Piotr Drąg
f68582356d Updated POTFILES.in 2015-06-03 19:02:12 +02:00
Xavier Claessens
0d8dd2cf5c doc: add GTlsInteractionClass
https://bugzilla.gnome.org/show_bug.cgi?id=750344
2015-06-03 10:19:02 -04:00
Alexander Larsson
7cba800a84 GNetworkMonitorNetlink: Fix check for non-kernel messages
This code used to look at the SCM_CREDENTIALS and ignore every message
not from uid 0. However, when user namespaces are in use this does not
work, as if uid 0 is not mapped you get overflowuid instead. Right now
this means we ignore all messages in such user namespaces and glib
apps hang on startup.

We can't look at pids either, as pid 0 is returned for processes
outside your pid namespace.

Instead the correct approach is to look at the sending sockaddr and
if the port id (nl_pid) is zero, then its from the kernel.

Source:
http://lists.linuxfoundation.org/pipermail/containers/2015-May/036032.html

https://bugzilla.gnome.org/show_bug.cgi?id=750203
2015-06-03 08:52:54 +02:00
Alexander Larsson
f8273f39a1 Add GNativeSocketAddress for handling "other" addresses
Instead of just dropping address types that we're not specifically
handling we return a GNativeSocketAddress which is just a dummy
container for the stuct sockaddr.

https://bugzilla.gnome.org/show_bug.cgi?id=750203
2015-06-03 08:52:54 +02:00
Mattias Ellert
f7b13e05f9 thread: Check sysconf value before using it
sysconf() is documented as returning -1 if it can't determine
a minimum thread stack size. Check for this case before using
the return value.

https://bugzilla.gnome.org/show_bug.cgi?id=739122
2015-05-28 21:54:52 -04:00
Matthias Clasen
916297be79 Add a global signal handler table
Add a global lookup table for signal handlers. We already give
them a unique ID, so there is no good reason to pay for
non-constant lookups when disconnecting handlers.

https://bugzilla.gnome.org/show_bug.cgi?id=737009
2015-05-27 14:41:19 -04:00