... otherwise we might end up using the worker after it has been
freed. Reported by Dan Winship and Colin Walters.
This fix uncovered a bug in the /gdbus/nonce-tcp test case so "fix"
that as well to use a better way of having one thread wait for another
(using quotes for the word "fix" since it's pretty hackish to
busy-wait in one thread to wait for another).
Signed-off-by: David Zeuthen <davidz@redhat.com>
_GNU_SOURCE must be defined before including any other (system)
header, so defining it in glib-unix.h (and hoping no one has included
anything else before that) is wrong. And the "#define _USE_GNU"
workaround for this problem in gnetworkingprivate.h is even wronger
(and still prone to failure anyway due to single-include guards).
Fix this by defining _GNU_SOURCE in config.h when building against
glibc. In theory this is bad because new releases of glibc may include
symbols that conflict with glib symbols, which could then cause
compile failures. However, most people only see new releases of glibc
when they upgrade their distro, at which point they also generally get
new releases of gcc, which have new warnings/errors to clean up
anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=649201
... this was causing a GDBus test-case to fail so now that it is
fixed, also reenable the test case.
https://bugzilla.gnome.org/show_bug.cgi?id=631379
Signed-off-by: David Zeuthen <davidz@redhat.com>
Otherwise things probably won't work in a garbage-collected world
(consider the trivial GC that never collects garbage).
This commit breaks GDBusServer ABI. No known released software is
using this code.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Rework filter functions as per
https://bugzilla.gnome.org/show_bug.cgi?id=624546#c8
This commit breaks ABI. However, this ABI break affects only
applications using filter functions. The only known user of is dconf.
Signed-off-by: David Zeuthen <davidz@redhat.com>
==29535== 56 (24 direct, 32 indirect) bytes in 1 blocks are definitely lost in loss record 1,112 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804D63A: test_nonce_tcp (gdbus-peer.c:1229)
==29535== 107 (24 direct, 83 indirect) bytes in 1 blocks are definitely lost in loss record 1,188 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804D8E8: test_nonce_tcp (gdbus-peer.c:1259)
==29535== 112 (24 direct, 88 indirect) bytes in 1 blocks are definitely lost in loss record 1,193 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804D79A: test_nonce_tcp (gdbus-peer.c:1248)
==29535== 73 (24 direct, 49 indirect) bytes in 1 blocks are definitely lost in loss record 1,152 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804C6CE: test_peer (gdbus-peer.c:803)
Bug #628331.
==6793== 32 (24 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 779 of 1,423
==6793== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==6793== by 0x4057094: g_malloc (gmem.c:134)
==6793== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==6793== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==6793== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==6793== by 0x412372A: g_object_constructor (gobject.c:1482)
==6793== by 0x4122E1D: g_object_newv (gobject.c:1266)
==6793== by 0x4122B93: g_object_new (gobject.c:1178)
==6793== by 0x41DB4F9: g_unix_fd_list_new (gunixfdlist.c:159)
==6793== by 0x804AADD: test_interface_method_call (gdbus-peer.c:172)
Bug #628331.
Allow modifying a GDBusMessage in a filter function and also add tests
for this. This breaks API but leaves ABI (almost) intact - at least
dconf's GSettings backend (the only big user I know of) will keep
working.
https://bugzilla.gnome.org/show_bug.cgi?id=624546
Signed-off-by: David Zeuthen <davidz@redhat.com>
If sending a lot of data and/or the other peer is not reading it, then
socket buffers can overflow. This is communicated from the kernel by
returning EAGAIN. In GIO, it is modelled by g_output_stream_write()
and g_socket_send_message() returning G_IO_ERROR_WOULD_BLOCK.
It is also problematic that that we're using synchronous IO in the
shared GDBus IO thread. It means that one GDBusConnection can lock up
others.
It turns out that by porting from g_output_stream_write() to
g_output_stream_write_async() we fix the EAGAIN issue. For GSocket, we
still need to handle things manually (by creating a GSource) as
g_socket_send_message() is used.
We check the new behavior in Michael's producer/consumer test case (at
/gdbus/overflow in gdbus-peer.c) added in the last commit.
Also add a test case that sends and receives a 20 MiB message.
Also add a new `transport' G_DBUS_DEBUG option so it is easy to
inspect partial writes:
$ G_DBUS_DEBUG=transport ./gdbus-connection -p /gdbus/connection/large_message
[...]
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 0 on a GSocketOutputStream
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 128000 on a GSocketOutputStream
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 256000 on a GSocketOutputStream
[...]
========================================================================
GDBus-debug:Transport:
>>>> WROTE 43669 bytes of message with serial 4 and
size 20971669 from offset 20928000 on a GSocketOutputStream
[...]
========================================================================
GDBus-debug:Transport:
<<<< READ 16 bytes of message with serial 3 and
size 20971620 to offset 0 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 15984 bytes of message with serial 3 and
size 20971620 to offset 16 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 16000 bytes of message with serial 3 and
size 20971620 to offset 16000 from a GSocketInputStream
[...]
========================================================================
GDBus-debug:Transport:
<<<< READ 144000 bytes of message with serial 3 and
size 20971620 to offset 20720000 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 107620 bytes of message with serial 3 and
size 20971620 to offset 20864000 from a GSocketInputStream
OK
https://bugzilla.gnome.org/show_bug.cgi?id=626748
Signed-off-by: David Zeuthen <davidz@redhat.com>
- Make GCredentials instance and class structures private so it can't
be subclassed and we don't have to worry about ABI compat
issues. This also allows us to get rid of the GCredentialsPrivate
struct.
- Add a GCredentialsType enumeration that is used whenever exchanging
pointers with the user. This allows us to support OSes with
multiple native credential types. In particular, it allows
supporting OSes where the native credential evolves or even changes
over time.
- Add g_socket_get_credentials() method.
- Add tests for g_socket_get_credentials(). Right now this is in the
GDBus peer-to-peer test case but we can change that later.
- Move GTcpConnection into a separate gtk-doc page as was already
half-done with GUnixConnection. Also finish the GUnixConnection
move and ensure send_credentials() and receive_credentials()
methods are in the docs. Also nuke comment about GTcpConnection
being empty compared to its superclass.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is currently unused but might be useful in the future. For
example, it might be nice with a way to bypass the current queue of
outgoing messages - having a flag enumeration allows us to add a
G_DBUS_SEND_MESSAGE_FLAGS_BYPASS_QUEUE etc. etc.
This commit breaks ABI and API. Users of the (rarely used) API to send
messages will have to port to this new API.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Things will still work fine if the GDBusInterfaceInfo is allocated
statically because if so the ref_count will be -1.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Without this guarantee, peer-to-peer connections are not very
useful. However, with this guarantee it's possible to export objects
in a handler for the GDBusServer::new-connection signal.
There are two caveats with this patch
- it won't work on message bus connections
- we don't queue up messages to be written
that can be addresses later if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=623142
Signed-off-by: David Zeuthen <davidz@redhat.com>
Allow constructing a GDBusProxy for well-known names as discussed here
http://mail.gnome.org/archives/gtk-devel-list/2009-October/msg00075.html
including test cases.
Make it possible to create a GDBusProxy for a GBusType instead of a
GDBusConnection. This requires G_BUS_TYPE_NONE so add that too.
Nuke g_bus_watch_proxy() since one can now more or less use GDBusProxy
for this.
Port gdbus-example-watch-proxy to this new API and include this
example in the GDBusProxy doc page.
Also nuke the GType parameter from the GDBusProxy constructors as
requested here: https://bugzilla.gnome.org/show_bug.cgi?id=621229
Also update the porting guide and other API docs for this change.
Also fix a bug in the signal dispatching code so each subscriber only
get notified once, not N times, for the same signal. Also add a test
case for this.
https://bugzilla.gnome.org/show_bug.cgi?id=621213
Signed-off-by: David Zeuthen <davidz@redhat.com>
- Fix various #include issues
- Change #error to #warning for the EXTERNAL authentication mechanism.
It is not clear if this should work on Win32 at all.
- Call close() before unlink() for the SHA1 keyring
- Change #error to #warning so we don't forget to do
permission checking of the .dbus-keyrings directory
- Use Win32 SID for the SHA1 auth mech
- Apparently we can't use word 'interface' as an identifier
- Implement a _g_dbus_win32_get_user_sid() function. For now it's
private. Don't know if it should be public somewhere. Maybe in
a future GCredentials support for Win32? I don't know.
- GFileDescriptorBased is not available on Win32. So avoid using
it in GLocalFile stuff. Now, Win32 still uses GLocalFile + friends
(which works with file descriptors) so expose a private function
to get the fd for an OutputStream so things still work.
- Fixup gio.symbols
- Fixup tests/gdbus-peer.c so it builds
With this, at least things compile and the gdbus-peer.exe test case
passes. Which is a great start. I've tested this by cross-compiling on
a x86_64 Fedora 13 host using mingw32 and running the code on a 32-bit
Windows 7 box.
https://bugzilla.gnome.org/show_bug.cgi?id=619142
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is to match g_dbus_connection_new(). This extension allows us to
extend GDBusAuthObserver to also be used in client-side authentication
in the future (right now it's only used on the server-side).
This makes it possible to use the cached properties mechanism even if
constructing the proxy with the DO_NOT_LOAD_PROPERTIES flag.
This is useful for cases where you obtain the and track object
properties out-of-band. For example, in udisks, the plan is to have
something like this
Manager.GetObjects (out ao paths, out aa{sa{sv}} all_properties);
Manager.ObjectAdded (o path, a{sa{sv}} all_properties);
Manager.ObjectChanged (o path, a{sa{sv}} all_properties);
Manager.ObjectRemoved (o path, a{sa{sv}} all_properties);
E.g. the first GetObjects() call will return *all* data about *all*
exported objects. Further, this way a client will only need to listen
these three signals (three AddMatch) on the Manager object and it will
never need to do GetAll() etc (e.g. can use DO_NOT_LOAD_PROPERTIES).
(Of course this only works if the client is interested in all
objects... while this is true for udisks it is generally not true for
other D-Bus services).
Also use expected_interface to check for programming errors.
Lots of people been suggesting this. We still use MethodInvocation /
method_invocation for handling incoming method calls so use call()
instead of invoke_method() helps to separate the client and server
facilities. Which is a good thing(tm).
Things compile and the test-suite passes. Still need to hook up
gio.symbols and docs. There are still a bunch of TODOs left in the
sources that needs to be addressed.
Signed-off-by: David Zeuthen <davidz@redhat.com>
