Passing an nonsense string for the --dest argument can lead
to a segfault of gdbus. Thats not nice, so use our existing
validation function for bus names here.
https://bugzilla.gnome.org/show_bug.cgi?id=747541
Make sure error handling on repeated <summary> and <description> is
being done properly, not resulting in glib-compile-schemas throwing a
critical.
https://bugzilla.gnome.org/show_bug.cgi?id=747542
Fix a couple of issues in error handling in glib-compile-schemas.
The first problem is that, in case of repeated <summary> or
<description> tags we were still allocating a GString which was never
being freed (due to the throwing of the error resulting in immediate
termination of the parse).
The second problem is that if the repeated <summary> tag also had
attributes, we would attempt to set the GError twice.
https://bugzilla.gnome.org/show_bug.cgi?id=747542
Bug 747209 introduced an error when multiple <summary> or <description>
tags are found for a single key in a GSettings schema. This check
should have been present from the start, but it was left out because the
schema compiler doesn't include these items in the cache file. Even
still -- part of the schema compiler's job is validation, and it should
be enforcing proper syntax here.
Repeated <summary> and <description> tags are a semi-common problem when
intltool has been misconfigured in the build system of a package, but
it's possible to imagine mistakes being made by hand as well.
The idea is that these problems would be caught during the build of a
package and maintainers would be forced to fix their build systems.
An unintended side-effect of this change, however, is that the schema
compiler started ignoring already-installed schemas that contained these
problems, when rebuilding the cache. This means that the installation
of _any_ application would cause the regeneration of the entire cache,
with these already-installed applications being excluded. Without the
schema in the cache, the application would crash on next startup.
The validation check in the gsettings m4 macro passes --strict to the
compiler, which is not used when rebuilding the cache after
installation. Pass this flag down into the parser and only throw the
error in case --strict was given. This will result in the (desired)
build failure without also causing already-installed apps to stop
functioning.
This means that we will not get even a warning about the invalid schema
file in the already-installed case, but that's fine. There is no sense
spamming the user with these messages when they are already quite fatal
for the developer at build time.
https://bugzilla.gnome.org/show_bug.cgi?id=747472
Commit f10b655 removed the inclusion of gasyncresult.h from gdbusproxy.c,
but gdbusproxy.c uses g_async_result_get_source_object(), which caused a
build warning/error. Fix that.
The gdbus GTask port introduced a deadlock because some code had been
using g_simple_async_result_complete_in_idle() to ensure that the
callback didn't run until after a mutex was unlocked, but in the gtask
version, the callback was being run immediately. Fix it to drop the
mutex before calling g_task_return*(). Also, tweak
tests/gdbus-connection to test this.
https://bugzilla.gnome.org/show_bug.cgi?id=747349
Add support for copying session data between client connections.
This is needed for implementing FTP over SSL. Most servers use a separate
session for each control connection and enforce sharing of each control
connection's session between the related data connection.
Copying session data between two connections is needed for two reasons:
1) The data connection runs on a separate port and so has a different
server_identity which means it would not normally share the session with
the control connection using the session caching currently implemented.
2) It is typical to have multiple control connections, each of which
uses a different session with the same server_identity, so only one of
these sessions gets stored in the cache. If a data connection is opened,
(ignoring the port issue) it may try and reuse the wrong control
connection's session, and fail.
This operation is conceptually the same as OpenSSL's SSL_copy_session_id
operation.
https://bugzilla.gnome.org/show_bug.cgi?id=745255
This allows the caller to know when a socket has been bound so that
it can for instance set the SO_SENDBUF and SO_RECVBUF socket options
before listen is called
https://bugzilla.gnome.org/show_bug.cgi?id=738207
GTask used a 10-thread thread pool for g_task_run_in_thread() /
g_task_run_in_thread_sync(), but this ran into problems when task
threads blocked waiting for another g_task_run_in_thread_sync()
operation to complete. Previously there was a workaround for this, by
bumping up the thread limit when that case was detected, but deadlocks
could still happen if there were non-GTask threads involved. (Eg, task
A sends a message to thread X and waits for a response, but thread X
needs to complete task B in a thread before returning the response to
task A.)
So, allow GTask's thread pool to be expanded dynamically, by watching
it from the glib worker thread, and growing it (at an
exponentially-decreasing rate) if too much time passes without any
tasks completing. This should solve the deadlocking problems without
causing sudden breakage in apps that assume they can queue huge
numbers of tasks at once without consequences.
https://bugzilla.gnome.org/show_bug.cgi?id=687223
This schema compiler was completely ignoring <summary> and
<description> tags. Unfortunately, there are modules out there
who merge translations for these back in, with xml:lang. And
this is giving dconf-editor a hard time. Since this is not
how translations of schemas are meant to be done, just
reject such schema files.
Also add tests exercising the new error handling.
https://bugzilla.gnome.org/show_bug.cgi?id=747209
glib-compile-resources was guessing a filename ending
in .c when generating sources, but did not do the same
for headers. Fix it so it generates a .h file when
guessing the filename for headers.
https://bugzilla.gnome.org/show_bug.cgi?id=746753
The hash table stores the list of unmatched IN_MOVE_FROM events, but we
were removing entries from it when popping IN_MOVE_TO events.
Fix that up to correct a crash in nautilus due to the assertion failure
below.
https://bugzilla.gnome.org/show_bug.cgi?id=746749
Due to a typo, a rename reported via a pair of delete/create events (due
to the watcher not giving the flag for moves to be paired) was
accidentally reported as being created with the old name instead of the
new name.
Fix that.
We declare the typedefs for GListModel and GListStore in giotypes.h, as
a matter of convention. This is not actually required, since the
typedef is emitted as part of the G_DECLARE_* macros.
The giotypes.h approach is only used to avoid cyclic dependencies
between headers, which is not a problem in this case.
Type redefinition is a C11 feature, and although it was around in some
compilers before then, gcc 4.2.1 (from 2007) is apparently still in wide
use, being the default compiler for OpenBSD.
Eventually, we will probably hit a case where we actually need to
redefine a type, but since we're not there yet, let's back off a bit.
This WIP patch moves the Windows Directory Monitoring code to the new
GLocalFileMonitor mechanism, and adds file monitoring in the process.
Progress from previous patch:
-File renames are now properly supported, but G_FILE_MONITOR_EVENT_MOVED_IN
and G_FILE_MONITOR_EVENT_MOVED_OUT needs to be investigated, as
ReadDirectoryChangesW() seems to send FILE_ACTION_REMOVED when a file is
moved out of a directory.
-Events are handled for both the long and short (8.3) variants of the
filenames, and files monitored will report changes when it is changed
via its short or long filenames.
Things to be done:
-Perhaps find out about attribute changes in files in a monitored
directory; if a file is monitored, attribute changes are correctly
handled.
-Investigate on G_FILE_MONITOR_EVENT_MOVED_OUT,
G_FILE_MONITOR_EVENT_MOVED_IN, G_FILE_MONITOR_EVENT_PRE_UNMOUNT,
G_FILE_MONITOR_EVENT_UNMOUNTED.
-Investigate on the "boredom" algoritm, and see how we can do it on
Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=730116
Completely rewrite the FAM file monitor. Major changes:
- now runs in the worker thread
- dispatches events in a threadsafe way via GFileMonitorSource
- uses unix fd source instead of a GIOChannel
- is now simple enough to fit into one short file
This is the bare minimal effort. This seems not to crash immediately,
but it definitely needs some better testing.
The backend is not in good shape. It could use some serious work.
Use the "interesting" value from g_file_monitor_source_handle_event() to
decide if we're currently being flooded by a stream of boring events.
The main case here is when one or more files is being written to and the
change events are all being rate-limited in the GFileMonitor frontends.
In that case, we become "bored" with the event stream and add a backoff
timeout. In the case that it is exactly one large file being written
(which is the common case) then leaving the event in the queue also lets
the kernel perform merging on it, so when we wake up, we will only see
the one event. Even in the case that the kernel is unable to perform
merging, the context switch overhead will be vastly reduced.
In testing, this cuts down on the number of wake ups during a large file
copy, by a couple orders of magnitude (ie: less than 1% of the number of
wake ups).
Return an "interesting" boolean from the event handler function on
GFileMonitorSource.
An event was "interesting" if it will result in a signal actually being
dispatched to the user. It is "uninteresting" if it only hit an
already-dirty rate limiter.
We will use this information to do some backing off in the backends when
faced with a flood of uninteresting events.
We generally assume that an IN_CREATE event is the start of a series of
events in which another process is doing this:
fd = creat (...) -> IN_CREATE
write (fd, ..) -> IN_MODIFY
write (fd, ..) -> IN_MODIFY
close (fd) -> IN_CLOSE_WRITE
and as such, we use the CHANGES_DONE_HINT event after CREATED in order
to show when this sequence of events has completed (ie: when we receive
IN_CLOSE_WRITE when the user closes the file).
Renaming a file into place is handled by IN_MOVED_FROM so we don't have
to worry about that.
There are many other cases, however, where a new file 'appears' in a
directory in its completed form already, and the kernel reports
IN_CREATE. Examples include mkdir, mknod, and the creation of
hardlinks. In these cases, there is no corresponding IN_CLOSE_WRITE
event and the CHANGES_DONE_HINT will have to be emitted by an arbitrary
timeout.
Try to detect some of these cases and report CHANGES_DONE_HINT
immediately.
This is not perfect. There are some cases that will not be reliably
detected. An example is if the user makes a hardlink and then
immediately deletes the original (before we can stat the new file).
Another example is if the user creates a file with O_TMPFILE. In both
of these cases, CHANGES_DONE_HINT will still eventually be delivered via
the timeout.
Remove all event merging and dispatch logic from GFileMonitor. The only
implementation of GFileMonitor outside of glib is in gvfs and it already
does these things properly.
Get rid of GLocalDirectoryMonitor. We will use a single class,
GLocalFileMonitor, for both directory and file monitoring. This will
prevent every single backend from having to create two objects
separately (eg: ginotifydirectorymonitor.c and ginotifyfilemonitor.c).
Introduce GFileMonitorSource as a thread-safe cross-context dispatch
mechanism. Put it in GLocalFileMonitor. All backends will be expected
to dispatch via the source and not touch the GFileMonitor object at all
from the worker thread.
Remove all construct properties from GLocalFileMonitor and remove the
"context" construct property from GFileMonitor. All backends must now
get the information about what file to monitor from the ->start() call
which is mandatory to implement.
Remove the implementation of rate limiting in GFileMonitor and add an
implementation in GLocalFileMonitor. gvfs never did anything with this
anyway, but if it wanted to, it would have to implement it for itself.
This was done in order to get the rate_limit field into the
GFileMonitorSource so that it could be safely accessed from the worker
thread.
Expose g_local_file_is_remote() internally for NFS detection.
With the "is_remote" functionality exposed, we can now move all
functions for creating local file monitors to a proper location in
glocalfilemonitor.c
Port the inotify backend to adjust to the changes above. None of the
other backends are ported yet. Those will come in future commits.
Remove the hardwired 1 second event queue logic from inotify-kernel and
replace it with something vastly less complicated.
Events are now reported as soon as is possible instead of after a
delay.
We still must delay IN_MOVED_FROM events in order to look for the
matching IN_MOVED_TO events, and since we want to report events in order
this means that events behind those events can also be delayed. We
limit ourselves, however:
- no more than 100 events can be delayed at a time
- no event can be delayed by more than 10ms
https://bugzilla.gnome.org/show_bug.cgi?id=627285
Add a new internal constructor for GLocalFile (which itself is private).
This new constructor allows creating a GLocalFile from a dirname and a
basename, assuming that the dirname is already in canonical form and the
basename is a regular basename.
This will be used for creating GLocalFile instances from the file
monitoring code (for signal emissions).
For all of the effort spent ensuring that this algorithm would be
correctly threadsafe, I messed up the order of operations within a
single thread when porting to the new approach.
Fix that up.
Also: fix some overzealous asserting in the testcases. Since shutdown
is now lazy, we can never surely say !is_running at any particular point
in time.
This can be used to query whether the task has completed, in the sense
that it has had a result set on it, and has already – or will soon –
invoke its callback function.
Notifications for this property are emitted immediately after the task’s
main callback, in the same main context as that callback. This allows
for multiple bits of code to listen for completion of the GTask, which
opens the door for blocking on cancellation of the GTask and improved
handling of ‘pending’ behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=743636
g_socket_client_add_application_proxy() claimed "When the indicated
proxy protocol is returned by the #GProxyResolver, #GSocketClient will
consider this protocol as supported but will not try to find a #GProxy
instance to handle handshaking." But in fact, it did the checks in the
wrong order, so GProxy proxies ended up overriding
application-specified ones. Fix that.
Also, simplify the code a bit by making use of g_hash_table_add() and
g_hash_table_contains().
https://bugzilla.gnome.org/show_bug.cgi?id=733876
Currently, the Windows code use Winsock2-specific APIs to try to emulate
calls such as inet_pton(), inet_ntop() and if_nametoindex(), which may not
do the job all the time. On Vista and later, Winsock2 does provide a
proper implementation for these functions, so we can use them if they exist
on the system, by querying for them during g_networking_init(). Otherwise,
we continue to use the original code path for these, in the case of XP and
Server 2003.
This enables many of the network-address tests to pass on Windows as a
result, when the native Winsock2 implementations can be used.
https://bugzilla.gnome.org/show_bug.cgi?id=730352
Check the IPv6 addresses on Windows, as we need to reject those that have
brackets/ports around them as valid addresses in this form would have been
accepted during the call to g_inet_address_new_from_string ().
https://bugzilla.gnome.org/show_bug.cgi?id=730352
There was a theoretical deadlock between the worker trying to emit a
signal at the same time as we were waiting for it to shutdown the
notification (while holding the lock).
The deadlock was particularly annoying because we didn't really need to
wait for the shutdown and because it wasn't possible to signals to
arrive while waiting for a start. Attempting to deal with start and
stop in an asymmetric way could have lead to other weird situations,
however.
Drop the lock while waiting for the worker thread to start. This means
that we face the possibility of multiple waiters on the cond at the same
time, so we need to make more of a state machine.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
GUnixMountMonitor was not threadsafe before. It was a global singleton
which emitted signals in the first thread that happened to construct it.
Move it to a per-context singleton model where each GMainContext gets
its own GUnixMountMonitor. Monitor for the changes from the GLib worker
thread and dispatch the results to each context with an active monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
