This checks if the stream is writable before writing
to it. If the write succeeded with no error, then the
stream has to be also writable after the write
As RFC 8305 recommends we can start multiple DNS queries in parallel
to more quickly make an initial response, especially when one is
particularly slow/broken.
This is to ensure that the generated code is still compilable by the
running compiler, and see whether we can read the things in there
properly.
See issue #1580.
Otherwise they fill your real ~/.config/mimeapps.list with rubbish and
race for access to it. This is arguably not good.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1514
With the changes to limit GVariant type nesting (commit 7c4e6e9fbe),
it’s now possible to have a valid type signature which is not a valid
GVariant type when enclosed in parentheses (to make it a tuple).
Check for that when parsing the signature field in a D-Bus message.
Includes a unit test.
oss-fuzz#11120
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This test is intended to verify the fix for
https://bugzilla.gnome.org/show_bug.cgi?id=787731, which was that
g_file_query_filesystem_info() would return stale information for the
mount. After replacing a read-only mount with a read-write mount, this
test used to only fail if G_FILE_ATTRIBUTE_FILESYSTEM_READONLY was TRUE
and yet the file could be opened for writing. In particular, if (due to
a test bug) the file really was still on a read-only filesystem, the
test would pass.
Now that we have fixed that bug in the test, we can make a stronger
assertion.
fusermount -z behaves like umount --lazy, which is documented thus:
> Detach the filesystem from the file hierarchy now, and clean up all
> references to this filesystem as soon as it is not busy anymore.
Without this, the call to `fusermount -u` often fails with:
/usr/bin/fusermount: failed to unmount /home/wjt/src/gnome/glib/_build/dir_bindfs_mountpoint: Device or resource busy
which causes the subsequent call to bindfs to fail:
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
It's not clear what is causing the mount to be busy. Inserting a
g_usleep (100 * 1000) before the calls to `fusermount -u` also works to
make the problem go away, but for the purposes of this test the
important point is that the mount is detached from the directory, for
which a lazy unmount is fine.
Fixes#1590.
In practice, fusermount -u often fails:
/usr/bin/fusermount: failed to unmount /home/wjt/src/gnome/glib/_build/dir_bindfs_mountpoint: Device or resource busy
which causes the subsequent calls to bindfs to fail:
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
This may or may not cause the current test run to fail, but it reliably
causes a repeat run of the test to fail. This change causes the current
run to fail instead.
Currently, GDBusProxy:g-name-owner only notifies changes to the unique
name owner of the remote object in case the proxy was constructed for a
well-known name.
That sounds like an artificial restriction, and it's convenient to
connect to notify::g-name-owner if a proxy instance has already been
created for an unique name, instead of additionally using
g_bus_watch_name() to track the owner.
To fix this, always connect to NameOwnerChanged after the proxy is
initialized, instead of only doing so when the proxy was constructed for
a well-known name.
https://bugzilla.gnome.org/show_bug.cgi?id=791316https://gitlab.gnome.org/GNOME/glib/issues/1310
test_c_args is defined in the root meson.build with unfiltered list of
compiler flags, then redefined in gio/tests/meson.build after the
subdir() call. Move it before.
Similarly to g_source_set_name(), this sets a name on a GTask for
debugging and profiling. Importantly, this name is propagated to the
GSource for idle callbacks for the GTask, ending the glorious reign of
`[gio] complete_in_idle_cb`.
The name can be queried using g_task_get_name(). Locking is avoided by
only allowing the name to be set before the GTask is used from another
thread.
Includes tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This is the most degenerate possible test but it does exercise this code
path.
(Tweaked by Philip Withnall <withnall@endlessm.com> to also add the flag
to the autotools build.)
The executable depends only on the generated header file at compile
time, and on the library at link time. So meson can decide to compile
gdbus-peer.c before compiling the library and thus won't have generated
the header yet, causing the build error.
So declare_dependency() should only have the header file in its sources,
to force generating files before compiling gdbus-peer.c without
including objectmanager-gen.c into gdbus-peer's sources.
We use libgdbus_example_objectmanager_dep as dependency for various
tests, but this implies only a link dependency while it doesn't ensure
that the sources are generated.
Make this explicit
Test symlink expansion in find_mountpoint_for() function over
_g_local_file_find_topdir_for(). find_mount_for() is crucial for many
of glocalfile.c functionality (e.g. to determine correct trash location)
and symlink expansion has to work properly.
https://gitlab.gnome.org/GNOME/glib/issues/1522
This introduces no real functional changes (except when compiling with
G_DISABLE_ASSERT, in which case it fixes the test). Mostly just a code
cleanup.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The code was checking whether the signature provided by the blob was a
valid D-Bus signature — but that’s a superset of a valid GVariant type
string, since a D-Bus signature is zero or more complete types. A
GVariant type string is exactly one complete type.
This meant that a D-Bus message with a header field containing a variant
with an empty type signature (for example) could cause a critical
warning in the code parsing it.
Fix that by checking whether the string is a valid type string too.
Unit test included.
oss-fuzz#9810
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Parsing a D-Bus message with the signature field in the message header
of type other than ‘g’ (GVariant type signature) would cause a critical
warning. Instead, we should return a runtime error.
Includes a test.
oss-fuzz#9825
Signed-off-by: Philip Withnall <withnall@endlessm.com>
There were tests for invalid UTF-8 output when asynchronously
communicating with a subprocess, but nothing for synchronous
communication. Add such a test, and refine the code as a result.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
On Windows NTFS symlinks are implemented as reparse points,
which are special kinds of files *or directories*. A directory
symlink should link to a directory. A file symlink should link
to a file. Mismatching (such as a file symlink pointing to a
directory) produces symlinks that simply do not function.
Therefore GFileType file vs directory vs symlink distinction is
too simplistic to correctly represent a NTFS filesystem object type.
Since we can't turn back time and choose a better way of representing
file types, make GFileType reflect the file vs directory type on
Windows, meaning that all FS objects are either files or
directories (or shortcuts, which are also files), but never symlinks.
A test for symlinkiness will have to be made via GFileInfo - it
tracks symlinkiness separately from file/directory/whatever.
When using glib as a meson subproject on Windows the build currently fails
due to too long paths during the build process. See
https://github.com/mesonbuild/meson/issues/4226 for the upstream bug.
To work around the issue shorten the filenames of the generated gdbus files.
The tests were making assumptions about the order of the returned D-Bus
introspection nodes. However, these are semantically unordered and
changes to e.g. GHashTable would break the tests.
Fix this by applying a sort prior to validation.
This method drops the last reference *it* owns to the GTask, but then
continues to call methods on the GTask. This wasn’t resulting in
failures because a ref in another thread kept the GTask alive, but
that’s quite dodgy.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The X-Flatpak-RenamedFrom key is used in .desktop files to identify past
names for the desktop file. It is defined to be a list of strings.
However, there was previously no correct way to retrieve a list of
strings from the GKeyFile wrapped by GDesktopAppInfo, short of
re-parsing the file with GKeyFile.
Note that doing something like:
g_strsplit (g_desktop_app_info_get_string (...), ";", -1)
is not correct: the raw value "a\;b;" represents the one-element list
["a;b"], but g_key_file_get_string() rejects the sequence "\;", and so
g_desktop_app_info_get_string() returns NULL in this case. (Of course, a
.desktop file with a semicolon in its name is a pathological case.)
Add g_desktop_app_info_get_string_list(), a trivial wrapper around
g_key_file_get_string_list(), similar to g_desktop_app_info_get_string()
and co.
The change from g_key_file_free() to g_key_file_unref() in the test is
needed because g_key_file_free() clears the contents of the keyfile.
This is fine for all the fields which are eagerly loaded and copied into
GDesktopAppInfo, but not when we want to access arbitrary stuff from the
keyfile.
This makes it easier to debug test failures, by ensuring that g_debug()
and g_test_message() are printed as TAP diagnostics.
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/1528
Signed-off-by: Simon McVittie <smcv@collabora.com>
None of these files starts with a #! line, and they are not native
binary executables, so if a user attempts to execute them as a program,
Unix shells will run them as /bin/sh scripts. This is not going to end
well, since none of them are shell scripts (the gio bash completion
is for bash, which is not a lowest-common-denominator POSIX shell, and
in any case is designed to be sourced rather than executed).
Fixes: #1539
Signed-off-by: Simon McVittie <smcv@collabora.com>
These keep on taking just longer than 30s on my local machine when run
in parallel with the rest of the tests (i.e. with `ninja test`). Testing
them individually, they do terminate correctly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_icon_new_for_string() docs states that it should return a single name
when created with a single name. I add a second condition to this case:
the themed icon must not include default fallbacks (i.e. it must not
have been created with `g_themed_icon_new_with_default_fallbacks()`).
Otherwise the return value of `g_icon_new_for_string()` would not
recreate the same icon list when passed to `g_icon_new_for_string()`
(which would be another documentation inconsistency).
g_icon_new_for_string() is now back to old behavior for this specific
case.
I also revert the unit test for this case, and add a new unit test when
using g_themed_icon_new_with_default_fallbacks() with a single name as
well.
Closes#1513.
1) Remove the non-Windows-only condition for subdir('tests').
2) Add libiphlpapi, libws2_32 and libsecur32 deps, needed for W32 tests.
3) Remove the -no-undefined argument (gcc doesn't understand it,
it *does* understand -Wl,-no-undefined; either way, the test
compiles without this argument just fine; maybe meson adds it
by itself - you can hardly build shared modules without it).
4) Add or fix a number of includes
5) Disable gdbus-objectmanager tests when building with MSVC
(right now these tests don't work on Windows anyway, so the fact
that MSVC can't even build them properly is irrelevant;
most likely gdbus-codegen needs changes to put _GLIB_EXTERN
before each function)
It wasn’t being tested. It should behave the same as
g_list_model_get_item(), so write a wrapper for the two.
This brings the code coverage of glistmodel.c up to 100%.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
There are many cases where a default TLS database is not able to be
defined within the constraints of a system. For example glib-networking
(or glib-openssl) cannot retrieve the default certificate store on iOS
or Android and need to be initialized from a cert file of certificates
bundled with the application.
Previously GStreamer was relying on a custom patch to glib-networking to
populate the default database from the file pointed to by the
CA_CERTIFICATES environment variable however the mechanism that enabled
this was recently remove from glib-networking.
Adding a more generic g_tls_backend_set_default_database() API allows
application developers to override the default database using their own
certificates as well as allowing equivalent functionality on Android/iOS
(or others) as on the default database handling Linux.
Fixes https://gitlab.gnome.org/GNOME/glib-networking/issues/35
This is a follow-up to commit 614adf8a75,
which started generating two new files as part of the test; they need to
be cleaned up before distcheck will pass.
Ideally, the test should run a temporary directory and wipe that
directory itself before exiting, but that’s a bit of a big change to
make right now. Deferred to
https://gitlab.gnome.org/GNOME/glib/issues/1495.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Similar issue was fixed with commit f929d148, but it's happening again.
Define G_MESSAGES_DEBUG=all when running CI to ensure we won't regress
anymore.
In order to determine whether to trash a file to the home directory, we
compare its st_dev to our home directory's st_dev field.
This is the wrong thing to do on overlayfs when deleting files, because
st_dev contains the ID of the filesystem providing the file (which can
be the lower or upper filesystem), but directories always return the ID
of the overlayfs. Thus the comparison fails and we are unable to trash
the file.
Fix this by checking st_dev of the parent directory when we are deleting
a file.
Also adjust `test_trash_not_supported` for this - make its st_dev check
look at the parent directory's `st_dev` rather than the temporary file's
own.
Fixes#1027.
The documentation was unclear about what error codes would be returned
on attempting to open an empty or corrupt GVDB file. Previous versions
of the documentation incorrectly said that corrupt GVDB files were
considered equivalent to empty ones.
A recent commit has clarified the documentation to include its error
handling behaviour.
Update the two users of GVDB within GLib, GResource and GSettingsSource,
to follow this change, and add unit tests for them both.
Other users of the GVDB copylib will need to update their copy and make
appropriate changes if they have bugs in their handling of this
situation. dconf is one example of this. GVDB should be updated from
https://gitlab.gnome.org/GNOME/gvdb.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1454
It is a bug if we distribute files which are generated at build time —
they should be built on the machine which is compiling GLib, not be
shipped in the tarball.
This brings the autotools-generated tarball in line with the
ninja-generated one, with the exception of man pages and gtk-doc HTML
output.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Use g_test_skip() so that the TAP output is correct for the tests,
rather than printing using g_printerr().
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/640
Use either g_get_real_time() or g_date_time_new_now_local(). This means
we don’t need to worry about time_t being 32b in future (the year 2038
problem), and it makes the need for error handling a bit more explicit.
Improve the error handling in several cases.
Based on a patch by Niels De Graef
(https://gitlab.gnome.org/GNOME/glib/merge_requests/142).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1402
The tests array was being wiped out by an assignment instead of an
append. This adds another 19 tests to what’s typically being run
already.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This was missed in !137 because some of the GIO tests weren’t being run
under Meson (see following commits).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Adds tests to cover this case and similar cases for various GResource
methods in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/927
When changing the locale using setlocale(), duplicate the old locale
value before updating it, so that we can safely restore the old locale
after running the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Add an app-launching function which allows standard file descriptors
to be passed to the child process.
This will be used by gnome-shell to pass systemd journal descriptors
as stdout/stderr. gnome-shell's child_setup function can then be
eliminated, which will enable use of the posix_spawn optimized
gspawn codepath for desktop app launching.
In order to use the new posix_spawn gspawn codepath, for more robust
app launching when available memory is low, we need to meet some
conditions.
child_setup needs to be NULL for this optimization to work, so drop
the internal child_setup that is used here. Replace it with a lightweight
wrapper binary (gio-launch-desktop) that sets GIO_LAUNCHED_DESKTOP_FILE_PID
before executing the app.
Adjust PATH for gio tests so that it can execute the new binary from the
build directory.
They’re network file systems, but not system file systems (in the sense
that procfs is a system file system). This fixes them disappearing from
the sidebar in the UI.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1424
There were previously no tests for it. These take gmountoperation.c up
to 85.5% coverage of lines.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1423
check_expected_events is heavily modified in this commit to tolerate
event loss and allow renaming to be reported as creation and deletion.
This fixes test failure on FreeBSD.
Previously, calling:
g_dbus_is_supported_address ("some-imaginary-transport:", NULL)
correctly returned FALSE; but calling:
g_dbus_is_supported_address ("some-imaginary-transport:", &error)
crashed with:
GLib-GIO:ERROR:../gio/gdbusaddress.c:434:g_dbus_is_supported_address:
assertion failed: (ret || (!ret && (error == NULL || *error != NULL)))
This was because, if the address component did not start with a known
transport, no error was set. Fix this, reusing an error string used by
the corresponding else branch in g_dbus_address_connect(), and adjust
the test to pass both NULL and non-NULL GError **s to this function in
every test case. This case:
g_assert (!g_dbus_is_supported_address ("some-imaginary-transport:foo=bar;unix:path=/this/is/valid", NULL));
would have caught this bug with a non-NULL GError **.
Meson has the ability to classify tests according to "suites", a list of
tags. This is especially useful when we want to run specific sets of
tests — e.g. only GLib's tests — instead of the whole test suite. It
also allows us to classify special tests, like "slow" ones, so that we
can only run them when needed.
Non-glibc gettext implementation seems to decide the language from
LC_MESSAGES environment variable instead of LC_MESSAGES locale, so
we should set both environment variable and locale when running tests
which need translation from specific languages.
Main changes were:
- take into account that style variants are added to the list of icon
names.
- In the test of icons set with 3 names ("first", "testicon" and
"last"), I also changed "first" to "first-symbolic" so that we can
test in such a case that the variant is the regular icon (only for
this name, out of the 3).
- Finally icon hashes are necessarily changed, and since emblems are
sorted by their hash in emblem icons, I had to invert an order which
was now different in one of the tests.
The previously implementation considered a file to be a mountpoint if
its parent is on a different device. / is its own parent, so by this
definition it is not a mountpoint.
But / is (generally) listed in fstab, and fstab(5) defines the
directories it contains to be mountpoints. This attribute should follow
that definition (and reasonable expectation): the root directory is a
mountpoint.
So, add a special-case for the case where the file's parent has the same
st_dev and st_ino as the file, which is true only at the root.
Test this attribute at / (only on POSIX), /proc (but only on Linux), and
at many files and directories created by the test suite (which cannot be
mountpoints).
Sometimes file monitor events may be slow to emit. Using g_idle_add
makes it less possible for events to be scheduled later than the main
loop quit, preventing test failure caused by missing events.
This fixes test failure on FreeBSD.
Kqueue isn't good at detecting rapid file creation and deletion. It
tends to miss events because events returned by the kernel don't include
filename information. Since the size of struct kevent is fixed, it is
probably not possible to extend the API to include file names without
breaking ABI. Therefore, we disables the test here to avoid test failure
that is impossible to fix in a reliable way.
The test 'file' uses non-standard '--bytes' option when running du,
which may cause error on non-GNU systems. To keep the test working,
we skips the du check as if we don't find a du command when du fails.
-export-dynamic is a libtool flag. It is also supported by GCC as an
undocumented flag, but it is not supported by Clang. Since we don't use
libtool in meson, we should use -Wl,--export-dynamic instead.
This test assumes the subprocess does not print anything else on stdout
other than the dbus address, otherwise g_test_trap_assert_stdout()
fails to match. But if the env running tests has G_MESSAGES_DEBUG=all
then it will also print "PATH=%s".
Fixes this build error on macOS when inside an ssh terminal:
Traceback (most recent call last):
File "[...]/gio/tests/gengiotypefuncs.py", line 23, in <module>
for line in f:
File "[...]/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 2625: ordinal not in range(128)
https://bugzilla.gnome.org/show_bug.cgi?id=796328
On non-glibc platforms gettext is provided by extra libintl dependency.
We wrongly thought libintl is an internal dependency and applications
needs to explicitly link on it, but turns out that breaks many
applications and with autotools the .pc generated actually has -lintl in
public "Libs:".
https://bugzilla.gnome.org/show_bug.cgi?id=796085
It inserted the new items one position after the given one and inserted all new items
at the same position resulting in the items being in the reverse order of the
input array.
It was decided to make these behavioural changes because this function has according to
https://codesearch.debian.net/search?q=g_list_store_splice only one real user (nautilus)
and it didn't do what one would expect from reading the documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=795307
All those logging functions already add a newline to any message they
print, so there’s no need to add a trailing newline in the message
passed to them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
The monitor_path comes from g_file_get_path(), so should be freed with
g_free() rather than free(). This makes no difference because they are
the same function in practice, but using free() is a bit confusing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
This continues one of the const-correctness fixes from the previous
commit (it needed some more transitive fixes), and reverts another of
them, since it was over-zealous.
This fixes CI failure: https://gitlab.gnome.org/GNOME/glib/-/jobs/27125.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Spotted when temporarily compiling with -Wwrite-strings. This only goes
a small way towards making the code base -Wwrite-strings–clean. It
introduces no functional changes, and fixes no bugs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
This fix undefined symbol link error when building for non-glibc
platform. Applications must link on libintl, it is not a public
dependency of libglib.
On glibc platforms libintl is a not found dependency and is just ignored
by meson, so it doesn't hurt to always have it.
https://bugzilla.gnome.org/show_bug.cgi?id=795406
g_desktop_app_info_load_from_keyfile() refuses to load .desktop files
where the executable doesn't exist. Therefore whether or not the .desktop
file added in commit 148995544 is actually considered during tests depends
on /usr/bin/flatpak being installed. This isn't a safe assumption to make,
so use /bin/sh to test filtering of "prefix" commands.
https://bugzilla.gnome.org/show_bug.cgi?id=795488
The executable name can be a useful bit of information to match on in
searches where it differs from the name (for example because the latter
is localised), but will produce surprising results where the real appli-
cation is executed by a shared binary (for example interpretors like
gjs or python, or sandboxes like flatpak).
Address this by adding a blacklist of binary names that are ignored
in search.
https://bugzilla.gnome.org/show_bug.cgi?id=795488
Add a test for monitoring an existing local file, with the
WATCH_HARD_LINKS flag specified. This would previously cause a crash;
now it doesn’t.
This test contains a FIXME where I suspect we should be getting some
additional file change notifications from changes made through the hard
link; this requires further follow up and probably further fixes to our
inotify backend.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755721
This test will only work on machines which have IPv6 enabled and have a
local IPv6 interface with ID 1. On machines which don’t (such as AWS
servers, which we run CI tests on), the GResolver tests will fail with
G_RESOLVER_ERROR_INVALID. We can’t differentiate this kind of failure
(where we’d want to skip the test) from an actual failure (where we’d
want to fail the test), so the only other option is to drop this
particular test vector. I don’t think it’s a significant loss.
This is the last fix needed to get our CI tests working reliably on
jenkins.gnome.org.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795234
There are various reasons why setting up a server might fail; it
reliably fails on AWS with IPv6 addresses (are we binding to the right
address?). Since we’re trying to test GSocket as a client, skip tests
where that happens.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795234
While 333 runs is very likely to reproduce the bug, Milan has previously
reproduced it with as few as 9 runs. Since this test will be run by the
CI machinery quite often, a lower number of runs each CI run will still
probably catch any regressions over time.
This reduces the total test runtime from 33s to 2s.
https://bugzilla.gnome.org/show_bug.cgi?id=793727
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
When using g_network_monitor_get_default() from another thread, it’s
possible for network-changed events to be processed after an instance of
GNetworkMonitor has been disposed, causing use-after-free problems.
Fix that by moving some of the initialisation into the GInitable.init()
chain, rather than in a main context idle callback.
This includes a unit test which probabilistically reproduces the bug
(but can’t do so deterministically due to it being a race condition).
Commit amended by Philip Withnall <withnall@endlessm.com> before
pushing.
https://bugzilla.gnome.org/show_bug.cgi?id=793727
When using g_settings_bind(), if a range binding triggers a range check
failure, g_settings_binding_property_changed() will return early, but it
won't cleanup properly causing some leaks. The binding will also still
be marked as 'running', which causes an assertion failure when trying to
free it:
"g_settings_binding_free: assertion failed: (!binding->running)"
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=794805
If glib-networking is installed and built with libproxy support, this
test will use it. If a proxy is set in the environment, we might get
correctly told to go through it for certain accesses. However, this isn't
going to work, because the testsuite monkeys with the network monitor to
tell it that all addresses - including the proxy - aren't reachable.
We're trying to check if adding networks to a GNetworkMonitor works in
general. Proxies just get in the way here, so let's use the built in
dummy proxy resolver which just tells us that all URLs are directly
accessible.
https://bugzilla.gnome.org/show_bug.cgi?id=794801
The `mount_monitor` variable is only set if the boolean
`with_mount_monitor` variable is set to TRUE, but the compiler does not
know that, so it'll warn when calling `g_clear_object()` even if the
clearing operation is gated with the same boolean.
Initializing with NULL does not cost us anything, and eliminates a
conditional branch.
https://bugzilla.gnome.org/show_bug.cgi?id=794732
Tighten up the validation of application IDs so they are always exactly
D-Bus well-known names. This is a slight change to the accepted format,
but since anyone using the API with an application ID which was
previously valid, but which was not a valid D-Bus well-known name, would
have received an error from D-Bus when their application tried to
register on the bus, I think this break is acceptable.
It will affect any applications which have application IDs which are not
valid D-Bus well-known names, and which use the G_APPLICATION_NON_UNIQUE
flag. From a quick search in Debian Codesearch, no C applications use
that flag.
Update the documentation to use the rules from the D-Bus specification,
including the latest advice discouraging use of hyphens:
https://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names-bus
Update the tests:
• Add the examples from the documentation to validate them.
• Especially the venerable 7-zip.org example.
• Move a couple of tests from expected-failure to expected-success:
they are valid D-Bus well-known names even if they’re a bit weird.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793400
This will make the assertion failure messages a little more useful, and
prevent the assertions being compiled out with G_DISABLE_ASSERT.
Introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793400
If calling g_subprocess_communicate() on a GSubprocess with no
stdout/stderr pipe, a critical warning would be emitted from
g_memory_output_stream_steal_as_bytes(), as it would be called on a NULL
output stream.
Fix that, improve the relevant GIR annotations, and expand the unit
tests to cover it (and various other combinations of flags).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793331
g_data_input_stream_read_upto() was introduced in 2.26; now it’s GLib
2.56, we can probably deprecate the old versions (since the handling of
consuming the stop character differs between the sync and async versions
of it).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=584284
This is a variant of g_file_get_path() which returns a const string to
the caller, rather than transferring ownership.
I've been carrying `gs_file_get_path_cached()` in libgsystem and it
has seen a lot of use in the ostree and flatpak codebases. There are
probably others too.
I think language bindings like Python/Gjs could also use this to avoid
an extra malloc (i.e. we could transparently replace
`g_file_get_path()` with `g_file_peek_path()`.
(Originally by Colin Walters. Tweaked by Philip Withnall to update to
2.56, change the function name and drop the locking.)
https://bugzilla.gnome.org/show_bug.cgi?id=767976
Custom desktop file fields may be translated, but there is currently
no non-hacky way to look up the localized value; fill get gap with
a small wrapper around g_key_file_get_locale_string().
https://bugzilla.gnome.org/show_bug.cgi?id=779413
This was introduced in bug #742997, but not added to the Makefile.am, so
it’s missing from tarballs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
https://bugzilla.gnome.org/show_bug.cgi?id=792322
Properly define GLIB/GOBJECT_STATIC_COMPILATION when static build is enabled.
Use library() instead of shared_library() to allow selecting static builds.
https://bugzilla.gnome.org/show_bug.cgi?id=784995
In order to enrich information displayed by GApplication command line
handling when --help is invoked, 3 new methods are proposed:
. g_application_set_option_context_parameter_string
. g_application_set_option_context_summary
. g_application_set_option_context_description
Those methods interact with the GApplication's internal GOptionContext
which is created for command line parsing in g_application_parse_command_line.
(please refer to the GOptionContext class for more information about option
context, parameter string, summary and description.)
To illustrate the 3 methods, an example is provided:
. gapplication-example-cmdline4.c
to suppress a compiler error with stricter warnings enabled (GCC):
gdbus-test-codegen.c: In function ‘on_handle_get_self’:
gdbus-test-codegen.c:403:26: error: format ‘%p’ expects argument of type
‘void *’, but argument 2 has type ‘GThread * {aka struct _GThread *}’
[-Werror=format=]
s = g_strdup_printf ("%p", g_thread_self ());
https://bugzilla.gnome.org/show_bug.cgi?id=792099
Previously, we waited an arbitrary 100ms or 200ms and then asserted
that the events had happened, but that might fail if the machine is
slow or heavily loaded.
We still wait for an arbitrary time for negative tests (asserting
that no more signals are received) because we don't have any way
to do better here.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884661https://bugzilla.gnome.org/show_bug.cgi?id=791744
New test to make sure we exercise the code paths in gdesktopappinfo.c
that get triggered when g_desktop_app_info_launch_uris_with_spawn()
is used (i.e. unknown app ID, no session bus), both for when either
a single URI or multiple ones are expected by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=791337
Putting a <!-- --> in plural<!-- -->s was an old hack used to fix
linking the symbol with gtk-doc when gtk-doc didn’t know about plural
forms. gtk-doc does now know about plural forms, so the hack can be
removed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When using gdbus-codegen to produce generated code for a method with
an out parameter with a signature like 'as', make sure to include
an "(array)" annotation for that parameter.
(Reworked by Philip Withnall to improve code formatting.)
https://bugzilla.gnome.org/show_bug.cgi?id=741167
In the vast majority of cases, we can avoid temporary
allocations for paths in g_resources_enumerate_children().
In the case we need to add a suffix "/", we can usually just
build the path on the stack. In other cases, we can completely
avoid the strdup, which appears to only have been added for
readability. If the path is really long, we fallback to doing
what we did before, and use g_strconcat().
In the case of Builder, this saved 5.3mb of temporary
allocations in the process of showing the first application
window.
https://bugzilla.gnome.org/show_bug.cgi?id=790275
Previously, the path canonicalization for resources had liberal use of
strlen() and memmove() while walking through the path. This patch avoids
any secondary strlen() and removes all use of memmove().
A single allocation is created up front as we should only ever need one
additional byte more than then length of the incoming path string.
To keep the implementation readable, the mechanics are kept in external
functions. memrchr() was not used due to its lack of portability.
This is faster in every test case I've tested. Paths that contain
relative ../ have the most speedup.
https://bugzilla.gnome.org/show_bug.cgi?id=790310
The patch basically just grabs the implementation of g_content_type_get_icon_internal()
from gcontenttype.c - the only difference is that it first converts UTI to MIME using
g_content_type_get_mime_type() and at the end frees this temporary MIME type.
https://bugzilla.gnome.org/show_bug.cgi?id=788936
This commit adds new W32-only functions to gstdio.c,
and a new header file, gstdioprivate.h.
These functions are:
g_win32_stat_utf8()
g_win32_lstat_utf8()
g_win32_fstat()
and they fill a private structure, GWin32PrivateStat,
which has all the fields that normal stat has, as well as some
extras.
These functions are then used throughout glib and gio to get better
data about the system. Specifically:
* Full, 64-bit size, guaranteed (g_stat() is forced to use 32-bit st_size)
* Full, 64-bit file identifier (st_ino is 0 when normal stat() is used, and still is)
* W32 File attributes (which stat() doesn't report); in particular, this allows
symlinks to be correctly identified
* Full, 64-bit time, guaranteed (g_stat() uses 32-bit st_*time on 32-bit Windows)
* Allocated file size (as a W32 replacement for the missing st_blocks)
st_mode remains unchanged (thus, no S_ISLNK), so when these are given back to
glib users (via g_stat(), for example, which is now implemented by calling g_win32_stat_utf8),
this field does not contain anything unexpected.
g_lstat() now calls g_win32_lstat_utf8(), which works on symlinks the way it's supposed to.
Also adds the g_win32_readlink_utf8() function, which behaves like readlink()
(including its inability to return 0-terminated strings and inability to say how large
the output buffer should be; these limitations are purely for compatibility with
existing glib code).
Thus, symlink support should now be much better, although far from being complete.
A new W32-only test in gio/tests/file.c highlights the following features:
* allocated size
* 64-bit time
* unique file IDs
https://bugzilla.gnome.org/show_bug.cgi?id=788180
This is needed by gnome-control-center and gnome-settings-daemon; it
makes existing checks from gunixmounts.c public.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788927
Checks that after a GSocket is closed, a source created off it
with g_socket_create_source() will dispatch exactly once with
G_IO_NVAL.
Based on a patch by Mikhail Zabaluev
https://bugzilla.gnome.org/show_bug.cgi?id=723655
We're eventually going to drop Autotools, but in the meantime we should
probably use idiomatic options and reduce warnings.
GLib is pretty much already safe for subdir-objects to be enabled,
except in the GIO tests, where the build references files that are
generated in a different level. For that, we can use the same solution
employed by GTK+, and link the appropriate file in the right
sub-directory.
https://bugzilla.gnome.org/show_bug.cgi?id=788989
During testing with gdk-pixbuf I noticed failures during content type
to mime conversion. The root reason was the unsafe conversion used
in create_cstr_from_cfstring. The problem was addressed in commit
c60226e0a1 but that was reverted. I noticed the commit only
when I had fixed the problem. In addition I added a test to check
the content type to mime conversion on MacOS. This problem is
discussed in Bug #788936.
See: https://bugzilla.gnome.org/show_bug.cgi?id=788936
Closes: Bug #788401
The problem is described here:
https://bugzilla.gnome.org/show_bug.cgi?id=788401
This patch introduces the use of the xdgmime system to guess
the content type from data. So you can guess for example the
type public.svg-image from the file content of a svg file.
This patch only applies to MacOS. A test for the regression
is also included.
On slow ARM machines doing parallel builds, there's no guarantee that
we'll get scheduled in a window between (100ms|250ms) and 500ms.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=769674
On slow ARM machines doing parallel builds, there's no guarantee that
we'll get through this in 5 seconds.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=769674
ssize_t is supported widely, but not universally, so use gssize instead.
Currently only one piece of code actually *needs* this change to be compilable
with MSVC, the rest are mostly in *nix parts of the code, but these are changed
too, for symmetry.
https://bugzilla.gnome.org/show_bug.cgi?id=788180
Add testcase for function g_file_query_filesystem_info()
reporting outdated info for "filesystem::readonly" attribute
when said attribute was different in a previous mounted
partition in the same device (as GIO maintains a mounts cache
per 'st_dev' stat() member).
To trigger a mount operation, testcase uses program 'bindfs'
instead of 'mount --bind' as bindfs does not require root
privileges. And 'fusermount -u' command is used to unmount said
bindfs mount.
As a reference in Fedora, 'bindfs' is installed from 'bindfs'
package and 'fusermount' from 'fuse' package (this one is installed
by default as being part of 'System Tools' group).
The test creates a directory with a file in it, then mounts it
readonly over another directory (the mountpoint), it then checks
that g_file_query_filesystem_info() for the file in it indeed reports
"filesystem::readonly" as TRUE. Then unmounts and mounts again this
time rw (not readonly), it then checks again if g_file_query_filesystem_info()
is reporting "filesystem::readonly" as TRUE, if that's the case, it
confirms the bug by opening said file in write mode.
Testcase is only added for Unix builds.
https://bugzilla.gnome.org/show_bug.cgi?id=787731
Setting a variable and then assigning it to itself avoids
-Wunused-but-set-variable but this specific trick is now caught by
-Wself-assign. Instead, actually use the value or don't bother
assigning it at all:
gdbusauth.c: call g_data_input_stream_read_byte() in void context
gdbusauthmechanismsha1.c: value is actually used
gdbusmessage.c: use consistent preprocessor-token protection
gthreadedresolver.c: skip over bytes in data blob
httpd.c: do something useful with the value
https://bugzilla.gnome.org/show_bug.cgi?id=745723
Similarly to the previous commit, move the temporary directory for the
monitor test from $(cwd) to the system temporary directory.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785260
Rather than creating a temporary directory in the current directory
(typically the builddir), then never deleting it; create one in the
system /tmp directory, and clean it up properly afterwards.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785260
Some of the dependencies' build systems for Visual Studio do not provide a
pkg-config file upon build, so we use find_library() for them when the
corresponding pkg-config files are not found during Visual Studio builds,
so that one will not need to make up pkg-config files for them, which
could be error-prone. These .lib names match the names that are built
with the officially supported build system that is used by their
respective Visual Studio support.
For ZLib, this will make gio-2.0.pc reflect on the zlib .lib based on
what is found, or whether we use the fallback/bundled ZLib, when we
don't have a pkg-config file for ZLib on MSVC. We still need to depend
on Meson to be updated to put the correct link argument for linking ZLib
in the pkg-config case.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
Little did I know when making commit
c257757cf6 that a lot of the output of
glib-compile-schemas is string matched in some of the unit tests. Fix
them to match the updated strings.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=695573
Some platforms use different extensions for compile-time linkable
libraries vs runtime-loadable modules. Need to use special libtool
flag in the latter case for consistency with what gmodule expects.
https://bugzilla.gnome.org/show_bug.cgi?id=731703
Prevent the situation where errno is set by function A, then function B
is called (which is typically _(), but could be anything else) and it
overwrites errno, then errno is checked by the caller.
errno is a horrific API, and we need to be careful to save its value as
soon as a function call (which might set it) returns. i.e. Follow the
pattern:
int errsv, ret;
ret = some_call_which_might_set_errno ();
errsv = errno;
if (ret < 0)
puts (strerror (errsv));
This patch implements that pattern throughout GLib. There might be a few
places in the test code which still use errno directly. They should be
ported as necessary. It doesn’t modify all the call sites like this:
if (some_call_which_might_set_errno () && errno == ESOMETHING)
since the refactoring involved is probably more harmful than beneficial
there. It does, however, refactor other call sites regardless of whether
they were originally buggy.
https://bugzilla.gnome.org/show_bug.cgi?id=785577
With meson from git dependencies of dependencies are no
longer added automatically and recursively to the linker
lines. Meaning dependencies that are used have to be
passed directly and explicitly or we'll get linker errors.
Need to fix up some of the tests a little, because the
test binary will not necessarily be run from the current
build sub-directory, and the build directory structure
might not always be a mirror of the source directory
structure, so pass location of glib-mkenums and
glib-compile-scheme and such directly.
giomodule test needed symbol visibility pragmas added. This is needed on
Windows anyway, so it's better to do it this way rather than disabling
-fvisibility=hidden for the test modules.
Disable gio tests on Windows, fix .gitignore to not ignore
config.h.meson, and add more things to it.
Rename the library file naming and versioning to match what Autotools
outputs, e.g., libglib-2.0.so.0.5000.2 on Linux, libglib-2.0-0.dll and
glib-2.0-0.dll on Windows with MSVC.
Several more tiny fixes, more executables built and installed, install
pkg-config and m4 files, fix building of gobject tests.
Changes to gdbus-codegen to support out-of-tree builds without
environment variables set (which you can't in Meson). We now add the
build directory to the Python module search path.
Previously, this was done at the time of spawning the subprocess, which
meant the g_subprocess_launcher_*_environ() functions could not be used
to modify the parent process’ environment.
Change the code to copy the parent process’ environment when
g_subprocess_launcher_set_environ(NULL) is called. Document the change
and add a unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=778422
Add $XDG_DATA_HOME/glib-2.0/schemas as a schema source, after (higher
priority than) $XDG_DATA_DIRS/glib-2.0/schemas but before
$GSETTINGS_SCHEMA_DIR. This is per the XDG Base Directory Specification,
which states that user specific versions of data in $XDG_DATA_DIRS can
be created in $XDG_DATA_HOME.
https://bugzilla.gnome.org/show_bug.cgi?id=741335
Currently, all mime types are considered subclasses of
application/octet-stream, but according to the freedesktop
standard, everything but the inode/* types is a subclass of
application/octet-stream.
Update the special case for application/octet-stream so that all
types but inode/* will match with it and add unit test for it.
https://bugzilla.gnome.org/show_bug.cgi?id=782311
It's unnecessary, and only adds visual noise; we have been fairly
inconsistent in the past, but the semi-colon-less version clearly
dominates in the code base.
https://bugzilla.gnome.org/show_bug.cgi?id=669355
This is an implementation of most of GAppInfo using the OS X
NSBundle APIs.
Missing at this point are things that don't have equivalents
in OS X, such as hidden desktop files, last-used, manual type
associations, and g_app_info_get_all().
https://bugzilla.gnome.org/show_bug.cgi?id=734946
g_settings_schema_source_get_default() is (transfer none), not (transfer
full).
Spotted by Marvin Schmidt.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=779265
The tests defaultvalue, gdbus-peer and gdbus-unix-addresses will fail
without DBUS, so only run them in case we HAVE_DBUS_DAEMON.
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
https://bugzilla.gnome.org/show_bug.cgi?id=767609
-2LL<<34 is undefined, because left-shifting a negative number is
undefined (it was implementation-defined behaviour in C99, but
is formally undefined in C11). The undefined behaviour sanitizer
picks this up.
Signed-off-by: Simon McVittie <smcv@debian.org>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=775510
Reviewed-by: Colin Walters
If we have an input parameter (or return value) we need to use (nullable).
However, if it is an (inout) or (out) parameter, (optional) is sufficient.
It looks like (nullable) could be used for everything according to the
Annotation documentation, but (optional) is more specific.
gcc 6 warns (fatally, by default) that %c only uses a 2-digit year
in some locales. The precise format does not seem to be important
for this sample code, so use ISO 8601 instead of suppressing the
warning with a pragma.
Signed-off-by: Simon McVittie <smcv@debian.org>
Reviewed-by: Colin Walters
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768453
g_socket_listener_add_address() is synchronous; all of the events will
have been emitted before it returns and it doesn't queue any sources.
The test was unintentionally depending on the fact that
g_main_context_iterate(NULL, TRUE) would return anyway (at least the
first time it was called), but that's no longer true after e4ee307.
https://bugzilla.gnome.org/show_bug.cgi?id=768968
GSettings objects were not unreffed in test_flags, test_enums and
test_ranges tests and when we skip internationalization tests, ie
test_l10n(_context).
https://bugzilla.gnome.org/show_bug.cgi?id=768560
OS X apparently stringifies the IPv6 address "::80" as "::0.0.0.128",
which is bizarre, but that address *is* in a "reserved for future use"
range, so it's not unambiguously wrong I guess. Anyway, fix the text
to use an address everyone can agree on.
https://bugzilla.gnome.org/show_bug.cgi?id=768551
Add a new API to allow clients to register a custom GFile implementation
handling a particular URI scheme.
This can be useful for tests, but also for cases where a different URI
scheme is desired to be used with another custom GFile backend.
As an additional cleanup, we can use this to register the "resource" URI
scheme too.
Based on a patch by Jasper St. Pierre <jstpierre@mecheye.net>.
https://bugzilla.gnome.org/show_bug.cgi?id=767887
5cea1c861d introduced accessors for 64bit
ints to gsettings, at which point the testcases were expanded.
Unfortunately, the expanded tests contained a bug: integer constants
passed to g_object_set() for a 64-bit property need an up-cast. Add
that now.
Problem found by Iain Lane.
Previously this would cause an assertion failure when checking the paths
of exported objects, as it would try to check that their paths started
with ‘//’ due to mishandling the root object case.
Includes a unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=761810
This fixes a build failure in Continuous that resulted in the error:
../../../gio/tests/test.gresource.xml: Failed to locate
'test-generated.txt' in any source directory.
Makefile:4676: recipe for target 'test.gresource' failed
make[6]: *** [test.gresource] Error 1
This prevents testsuite from trying to build any TESTS in that
subdirectory, which will fail, because there are no TESTS defined
in that Makefile.am.
This happens when user runs make check TESTS=...
https://bugzilla.gnome.org/show_bug.cgi?id=766407
This ensures that the generated file is always the same (not dependent
on the build machine's environment), making the build reproducible.
Thanks to Jérémy Bobbio <lunar@debian.org> for the Debian bug report and
patch.
https://bugzilla.gnome.org/show_bug.cgi?id=763617
* On W32 use a real directory (SYSTEMROOT) instead of '/etc/'
* Disable test_symbolic_icon() as it can't be passed (symbolic icons are not
really supported)
* PowerPoint/Gettext test still fails, presumably because msvcrt qsort() moves
the entires (both have the same priority)
https://bugzilla.gnome.org/show_bug.cgi?id=735696
It was removed, apparently accidentally, in commit 5b48dc4.
This had the side-effect that it wasn't included in tarball releases,
which means that commit ab7b4be doesn't work when building a package.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=734469
Reviewed-by: Colin Walters <walters@verbum.org>
Add string serialisation functions for GNetworkAddress, GSocketAddress,
GUnixSocketAddress, GInetSocketAddress, GNetworkService and
GSocketConnectable. These are intended for use in debug output, not for
serialisation in network or disc protocols.
They are implemented as a new virtual method on GSocketConnectable:
g_socket_connectable_to_string().
GInetSocketAddress and GUnixSocketAddress now implement
GSocketConnectable directly to implement to_string(). Previously they
implemented it via their abstract parent class, GSocketAddress.
https://bugzilla.gnome.org/show_bug.cgi?id=737116
If an error in the underlying sendmmsg() syscall occurs after
successfully sending one or more messages, g_socket_send_messages()
should return the number of messages successfully sent, rather than an
error. This mirrors the documented sendmmsg() behaviour.
This is a slight behaviour change for g_socket_send_messages(), but as
it relaxes the error reporting (reporting errors in fewer situations
than before), it should not cause problems.
https://bugzilla.gnome.org/show_bug.cgi?id=751924
Add support for receiving multiple messages with a single system call,
using recvmmsg() if available. Otherwise, fall back to looping over
g_socket_receive_message().
This adds new API, g_socket_receive_messages(), and corresponding unit
tests.
https://bugzilla.gnome.org/show_bug.cgi?id=751924
We don't need to run binaries we just built in order to successfully
build GLib and friends any more.
Since commit b74e2a7, we don't need to run glib-genmarshal when building
GIO; since commit f9eb9eed, all our tests (including the ones that do
need to run binaries we just built) are only built when running "make
check", instead of unconditionally at every build.
This means that we don't need to check for existing, native binaries
when cross-compiling, and fail the configuration step if they are not
found — which also means that you don't need to natively build GLib for
your toolchain, in order to cross-compile GLib.
We can also use the cross-compilation conditional, and skip those tests
that require a binary we just built in order to build.
https://bugzilla.gnome.org/show_bug.cgi?id=753745
Enhance GTestTlsBackend to allow setting the issuer property of
GTlsCertificates, and add a test to ensure certificate chain
construction with g_tls_certificate_new_from_pem() works as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=754264
These tests clear up a misunderstanding of mine: Monitoring
nonexisting files and directories *does* work with the inotify
implementation, it just has a very long timeout for scanning
for missing locations, so the test needs to take that into
account.
Add a new test which checks that atomically replacing a file that
is being monitored by GFileMonitor produced the expected events.
The test can easily be expanded to cover other file monitoring
scenarios.
This is a binding-friendly version of g_dbus_connection_register_object.
Based on a patch by Martin Pitt and the code of g_bus_watch_name_with_closures.
https://bugzilla.gnome.org/show_bug.cgi?id=656325
We already have start, stop and is_active methods, but turning it
into a real property is useful for a few reasons:
- it allows us to bind the property to an UI or a setting
- it allows us to get notified when the state changes
- it allows us to instantiate objects directly in the stopped state
https://bugzilla.gnome.org/show_bug.cgi?id=752089
In 4e7d22e268, deleting the file was moved
after the assertion which checks for the changed event that results from
it being deleted. This is the wrong way around and makes the assertion
fail.
Move the deletion back up before we check the condition. delete_app is
no longer an idle callback so it can be made void. The change
notification might come in when the loop isn't running now, so don't try
to quit if it isn't running. In this case we'll wait for the three
second timeout and the test will still pass.
https://bugzilla.gnome.org/show_bug.cgi?id=751737
This can be handy when you want to change the sense of a toggle
in the UI without rewriting the underlying logic. Currently, this
is just exposed as a construct-only property. We may add a
convenience wrapper or a special !property syntax for this later.
https://bugzilla.gnome.org/show_bug.cgi?id=728489
Previously, we waited up to 0.5s, but that can fail on slow
architectures like ARM; now we wait up to 60s in 0.1s increments.
Patch originally by Simon McVittie <simon.mcvittie@collabora.co.uk>,
modified by Iain Lane to be called earlier, to catch all testcases in a
particular test.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=724113
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Acked-by: Matthias Clasen <mclasen@redhat.com>
We previously waited 0.25s, which should be enough even on slow machines,
but you never know; but we also now wait in 0.1s increments, so this test
should actually be faster now.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=724113
Acked-by: Matthias Clasen <mclasen@redhat.com>
I searched all files that mention g_test_run, and replaced most
g_print() calls. This avoids interfering with TAP. Exceptions:
* gio/tests/network-monitor: a manual mode that is run by
"./network-monitor --watch" is unaffected
* glib/gtester.c: not a test
* glib/gtestutils.c: not a test
* glib/tests/logging.c: specifically exercising g_print()
* glib/tests/markup-parse.c: a manual mode that is run by
"./markup-parse --cdata-as-text" is unaffected
* glib/tests/testing.c: specifically exercising capture of stdout
in subprocesses
* glib/tests/utils.c: captures a subprocess's stdout
* glib/tests/testglib.c: exercises an assertion failure in g_print()
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
This stops it from interfering with structured stdout such as TAP.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
When running the nonce-tcp and tcp-anonymous tests in one run
of gdbus-peer, or running one of them twice via command-line options
"-p /gdbus/tcp-anonymous -p /gdbus/tcp-anonymous", the one run second
would sometimes fail to connect with ECONNRESET.
Adding more debug messages revealed that in the successful case,
g_main_loop_run() was executed in the server thread first:
# tcp-anonymous: server thread: listening on tcp:host=localhost,port=53517
# tcp-anonymous: server thread: starting server...
# tcp-anonymous: server thread: creating main loop...
# tcp-anonymous: server thread: running main loop...
# tcp-anonymous: main thread: trying tcp:host=localhost,port=53517...
# tcp-anonymous: main thread: waiting for server thread...
but in the failing case, the main thread attempted to connect
before the call to g_main_loop_run() in the server thread:
# tcp-anonymous: server thread: listening on tcp:host=localhost,port=40659
# tcp-anonymous: server thread: starting server...
# tcp-anonymous: server thread: creating main loop...
# tcp-anonymous: main thread: trying tcp:host=localhost,port=40659...
# tcp-anonymous: server thread: running main loop...
(The log message "creating main loop" was immediately before
create_service_loop(), and "running main loop" was immediately
before g_main_loop_run().)
To ensure that the GDBusServer has a chance to start accepting
connections before the main thread tries to connect to it, do not
tell the main thread about the service_loop immediately, but instead
defer it to an idle.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=749079
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
This test originally did not connect to the bus, which meant it was
omitted from commits like 415a8d81 that made sure none of GLib tests
rely on the presence of an existing session bus. (In particular,
Debian autobuilders don't have a session bus.)
When test_double_array() was added, environments like the Debian
autobuilders didn't catch the fact that this test relied on having a
session bus, because it is often skipped in minimal environments
due to its libdbus-1 dependency.
We don't actually need to connect to a dbus-daemon here: it's enough
to convert the message from GVariant to D-Bus serialization, and
back into an in-memory representation through libdbus. That's what
check_serialization() does, and I've verified that when I re-introduce
bug #732754 by reverting commits 627b49b and 2268628 locally, this
test still fails.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=744895
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Colin Walters <walters@verbum.org>
The third parameter of the thumnail_verify() function had been updated to
const GLocalFileStat, so update the thumbnail-verification test likewise
so that the test works properly on all supported platforms.
https://bugzilla.gnome.org/show_bug.cgi?id=711547
Make sure error handling on repeated <summary> and <description> is
being done properly, not resulting in glib-compile-schemas throwing a
critical.
https://bugzilla.gnome.org/show_bug.cgi?id=747542
The gdbus GTask port introduced a deadlock because some code had been
using g_simple_async_result_complete_in_idle() to ensure that the
callback didn't run until after a mutex was unlocked, but in the gtask
version, the callback was being run immediately. Fix it to drop the
mutex before calling g_task_return*(). Also, tweak
tests/gdbus-connection to test this.
https://bugzilla.gnome.org/show_bug.cgi?id=747349
This allows the caller to know when a socket has been bound so that
it can for instance set the SO_SENDBUF and SO_RECVBUF socket options
before listen is called
https://bugzilla.gnome.org/show_bug.cgi?id=738207
GTask used a 10-thread thread pool for g_task_run_in_thread() /
g_task_run_in_thread_sync(), but this ran into problems when task
threads blocked waiting for another g_task_run_in_thread_sync()
operation to complete. Previously there was a workaround for this, by
bumping up the thread limit when that case was detected, but deadlocks
could still happen if there were non-GTask threads involved. (Eg, task
A sends a message to thread X and waits for a response, but thread X
needs to complete task B in a thread before returning the response to
task A.)
So, allow GTask's thread pool to be expanded dynamically, by watching
it from the glib worker thread, and growing it (at an
exponentially-decreasing rate) if too much time passes without any
tasks completing. This should solve the deadlocking problems without
causing sudden breakage in apps that assume they can queue huge
numbers of tasks at once without consequences.
https://bugzilla.gnome.org/show_bug.cgi?id=687223
This schema compiler was completely ignoring <summary> and
<description> tags. Unfortunately, there are modules out there
who merge translations for these back in, with xml:lang. And
this is giving dconf-editor a hard time. Since this is not
how translations of schemas are meant to be done, just
reject such schema files.
Also add tests exercising the new error handling.
https://bugzilla.gnome.org/show_bug.cgi?id=747209
For all of the effort spent ensuring that this algorithm would be
correctly threadsafe, I messed up the order of operations within a
single thread when porting to the new approach.
Fix that up.
Also: fix some overzealous asserting in the testcases. Since shutdown
is now lazy, we can never surely say !is_running at any particular point
in time.
This can be used to query whether the task has completed, in the sense
that it has had a result set on it, and has already – or will soon –
invoke its callback function.
Notifications for this property are emitted immediately after the task’s
main callback, in the same main context as that callback. This allows
for multiple bits of code to listen for completion of the GTask, which
opens the door for blocking on cancellation of the GTask and improved
handling of ‘pending’ behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=743636
There was a theoretical deadlock between the worker trying to emit a
signal at the same time as we were waiting for it to shutdown the
notification (while holding the lock).
The deadlock was particularly annoying because we didn't really need to
wait for the shutdown and because it wasn't possible to signals to
arrive while waiting for a start. Attempting to deal with start and
stop in an asymmetric way could have lead to other weird situations,
however.
Drop the lock while waiting for the worker thread to start. This means
that we face the possibility of multiple waiters on the cond at the same
time, so we need to make more of a state machine.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
We install win32-software/autorun.exe (as test data for mime scanning)
only on UNIX builds, so don't attempt to chmod it on 'make install'
unless we're on UNIX.
I love Emacs keyboard macros, used them to convert the list of
defines cleverly into a list of tests, then iterated and filled in
the necessary constructor arguments.
This is *significantly* more pleasant to use from C (while handling
errors and memory cleanup).
While we're here, change some ugly, leaky code in
tests/desktop-app-info.c to use it, in addition to a test case
in tests/file.c.
https://bugzilla.gnome.org/show_bug.cgi?id=661554
delayed_close_free() calls g_object_unref() on a variable that is
expected to possibly contain NULL (as indicated by the fact that the
NULL case is handled in my_slow_close_output_stream_close_async()).
This is dead code right now (due to a bug in GDBus), which is why it
isn't actually causing a failure. It should still be fixed, however.
https://bugzilla.gnome.org/show_bug.cgi?id=743990
Make sure that we only match the _get_type() function name by
restricting the regexp to matching [A-Za-z0-9_]. We were matching on .*
before which means that if we had two _get_type() functions appearing on
a single line then we would get everything in between them included (by
the default rule of '*' being greedy).
This affected G_DECLARE_*_TYPE which puts several uses of _get_type()
into a single line.
GListModel is an interface that represents a dynamic list of GObjects.
Also add GListStore, a simple implementation of GListModel that stores
all objects in memory, using a GSequence.
https://bugzilla.gnome.org/show_bug.cgi?id=729351
Add a unit test that checks g_socket_new_from_fd by creating
a gsocket, obtaining its fd, duplicating the fd and then creating
a gsocket from the new fd. This shows a hang on win32 since the
gsocket created from the fd never receives the FD_WRITE event
because we wait for the condition without first trying to write
and windows signals the condition only after a EWOULDBLOCK error.
https://bugzilla.gnome.org/show_bug.cgi?id=741707
Fix two problems:
1) If g_socket_service_stop is called before the accept call is requeued,
then the reference count won't decrease and this code will hang forever:
while (G_OBJECT (service)->ref_count == ref_count)
g_main_context_iteration (NULL, TRUE);
2) Sometimes the testcase fails (maybe 1 in 200 times for me):
GLib-GIO:ERROR:socket-listener.c:73:connection_cb: assertion failed
(G_OBJECT (service)->ref_count == 2): (3 == 2)
Aborted (core dumped)
The problem is that depending on ordering, cancellation of the async
listener can require further main context iterations before it releases
the reference on the socket service. Furthermore, in some cases, it
requires at least one iteration.
https://bugzilla.gnome.org/show_bug.cgi?id=712570
