We can't use session_bus_down() in the test since gdocumentportal.c
holds a reference to the session bus connection, preventing it from
being finalised.
There are some GVfs locations (i.e. google-drive://, recent://), where
G_FILE_ATTRIBUTE_STANDARD_NAME is something tottaly different than
G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME. Thus it would be nice to have
an easy way to show the display names. The only way currently to show
the display names is to use --attributes option, which is a bit
cumbersome. Let's add new --show-display-names option.
https://gitlab.gnome.org/GNOME/gvfs/issues/402
Those tests require Python, gobject-introspection and python-dbusmock
making them unsuitable to be run within the uninstalled test suite.
There are no restrictions of dependencies when it comes to installed
tests so use those to exercise GMemoryMonitor.
With debug enabled, g_dbus_connection_call_done() will throw a
g_warning() if the call failed (on purpose or not) while trying to the
serial of a non-existant reply.
(/builds/GNOME/glib/_build/gio/tests/gdbus-connection:26921): GLib-GIO-CRITICAL **: 10:10:16.311: g_dbus_message_get_reply_serial: assertion 'G_IS_DBUS_MESSAGE (message)' failed
This is a reimplementation of commit
4aba03562b from Will Thompson, but
conditional on the caller passing `--glib-min-version 2.64` to
`gdbus-codegen` to explicitly opt-in to the new behaviour.
From the commit message for that commit:
Previously, if a method was not annotated with org.gtk.GDBus.C.UnixFD
then the generated code would never contain GUnixFDList parameters, even
if the method has 'h' (file descriptor) parameters. However, in this
case, the generated code is essentially useless: the method cannot be
called or handled except in degenerate cases where the file descriptors
are missing or ignored.
Check the argument types for 'h', and if present, generate code as if
org.gtk.GDBus.C.UnixFD annotation were specified.
Includes a unit test too.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1726
This can be used by callers to opt-in to backwards-incompatible changes
to the behaviour or output of `gdbus-codegen` in future. This commit
doesn’t introduce any such changes, though.
Documentation and unit tests included.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1726
We got a complaint here that trashing via the
portal deletes the target of a symlink, not the
symlink itself. It turns out that following the
symlink already happens on the glib side.
https://github.com/flatpak/xdg-desktop-portal/issues/412
Skipped tests use "77" as the return value, so return 77 instead of 0
when the static-link.py test gets skipped because of a missing
environment variable.
If the fuse module is loaded but /dev/fuse doesn't exist, it's likely
that we're running in a rootless container, or a badly setup one, and we
won't be able to use fuse, so skip this test.
This happened on my local system using podman running as a normal user,
but this apparently works as expected in our CI[1].
[1]: https://gitlab.gnome.org/GNOME/glib/merge_requests/466
gtk-doc switched from DocBook to Markdown ages ago. There is no Markdown
equivalent for `<warning>`, so just drop it. It wasn’t adding anything
particularly valuable to the documentation.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1130
gtk-doc long since switched to Markdown, so we shouldn’t be emitting
DocBook `<link>` tags.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1130
Add a Python-based test wrapper for the `gdbus-codegen` executable,
similar to the existing tests for `glib-mkenums` and friends.
Add a few basic tests to begin with, but this doesn’t approach anywhere
near full coverage.
The next step is to move the existing Meson-based `gdbus-codegen` tests
from `gio/tests/meson.build` into the Python test suite.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1612
Previously, running `gdbus-codegen` with no arguments would exit
successfully with no output. While technically correct, that seems
unhelpful.
Require at least one interface file to be specified, so the user gets an
error message if they don’t specify any.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It’s not particularly useful to put the gdbus-codegen version or the
name of the input file into the output from `gdbus-codegen`, and it
makes the output less reproducible. Drop it.
Also clarify the licensing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1612
If not doing this it might happen that the cancelled signal is emitted
between reaching a reference count of 0 and finalizing the GSource, at
which point part of the GSource is already freed and calling any GSource
functions is dangerous.
Instead do this from the dispose function. At this time the GSource is
not partially freed yet and calling any GSource API is safe as long as
we ensure that we have a strong reference to the GSource before calling
any GSource API.
_kqsub_free assumes the caller has called _kqsub_cancel before calling
it. It checks if both 'deps' and 'fd' have been freed and aborts when
the condition is not met. Since the only caller of _kqsub_free is
g_kqueue_file_monitor_finalize, which does call _kqsub_cancel before
calling _kqsub_free, it seems to be correct for _kqsub_free to assert
values of these two members there.
However, it is possible for _kqsub_cancel to return early without
freeing any resource _kqsub_free expects to be freed. When the kevent
call fails, _kqsub_cancel does not free anything and _kqsub_free aborts
with assertion failure. This is an unexpected behavior, and it can be
fixed by always freeing resources in _kqsub_cancel.
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/1935
"gio mount" doesn't print anything in case of success, however "gio mount -d"
prints "Mounted [id] at [mount_path]", which is inconsistent. It might probably
make sense for fstab volumes, but "gio mount -d" now support UUIDs which are
heavily used for daemon mounts and I think that it is not wise to print
"/run/user/$UID/gvfs" mount paths. The mount path can be still found over
"gio mount -l". Let's remove this message to make it more consistent.
"gio mount" only allows mounting volumes using device files, but not using
UUIDs. Volume monitors for various GVfs locations usually supports just UUIDs.
It would be handy to support them also for testing purposes (because
"g_file_mount_enclosing_volume()" does something else than "g_volume_mount()"
in case of shares provided by GOA volume monitor for example). Let's update
"-d" option to support also UUIDs.
https://gitlab.gnome.org/GNOME/gvfs/issues/251
It’s possible that one VFS operation will happen from a worker thread at
the same time as another is happening from the main thread, in which
case the static buffer which getpwnam() uses will be overwritten.
There’s a chance this will corrupt the results that one of the threads
receives.
Fix that by using the thread-safe getpwnam_r() version, via the new
g_unix_get_passwd_entry() function.
Fix the indentation of the surrounding block while we’re there.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1687
Those tests seem to regularly fail because a timeout (which we're
measuring outside the function that times out) is too long, which can
happen when the system is busy.
Don't run those tests unless "thorough" tests are requested. This
disables those tests by default.
Bail out! GLib-GIO:ERROR:../gio/tests/socket.c:1167:test_timed_wait: assertion failed (poll_duration < 112000): (114254 < 112000)
Bail out! GLib-GIO:ERROR:../gio/tests/cancellable.c:167:on_mock_operation_ready: assertion failed (error == (g-io-error-quark, 19)): error is NULL
Now we're returning the file type again, we need to mask it out to
compare with the mode. We can also check that the statbuf said the file
is a regular file.
Related: #1934
This reverts commit bfdc5fc4fc.
This changes the semantics of G_FILE_ATTRIBUTE_ID_UNIX_MODE, and we've
already found one user of the previous semantics (ostree).
Closes#1934
