Using prefixed property names like GtkWidget::visible
is very deprectated and basically never done. So avoid
paying the strchr cost before doing the first lookup.
Most of the time, we are dealing with static strings,
and we can compare them directly and avoid the strcmp.
Note that triggering this optimization requires
properties to be marked as G_PARAM_STATIC_NAME.
When rendering the contents of the GLib documentation stored inside the
introspection data, a common behaviour is to take the first paragraph as
a summary of the symbol being documented.
The documentation is assumed to be in Markdown format, which means:
- paragraphs must be separated by newlines
- lines that have an indentation of four or more spaces are considered
code blocks
- lines that start with a `#` are considered titles
This means we need to slightly tweak the documentation in our sources to
ensure that it can be rendered appropriately by tools that are not
gtk-doc.
See issue: #2365
gobject/gparam.c: In function ‘g_param_type_register_static’:
gobject/gparam.c:1434:3: error: missing initializer for field ‘value_table’ of ‘GTypeInfo’ {aka ‘struct _GTypeInfo’}
1434 | };
| ^
In file included from gobject/gvalue.h:26,
from gobject/gparam.h:26,
from gobject/gparam.c:26:
gobject/gtype.h:1063:26: note: ‘value_table’ declared here
1063 | const GTypeValueTable *value_table;
| ^~~~~~~~~~~
This commit only looks at the `Returns:` lines in the documentation, and
has examined all of them in the file. Function arguments have not been
checked.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2227
This was mostly machine generated with the following command:
```
codespell \
--builtin clear,rare,usage \
--skip './po/*' --skip './.git/*' --skip './NEWS*' \
--write-changes .
```
using the latest git version of `codespell` as per [these
instructions](https://github.com/codespell-project/codespell#user-content-updating).
Then I manually checked each change using `git add -p`, made a few
manual fixups and dropped a load of incorrect changes.
There are still some outdated or loaded terms used in GLib, mostly to do
with git branch terminology. They will need to be changed later as part
of a wider migration of git terminology.
If I’ve missed anything, please file an issue!
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The various `g_strdup_printf()` returns values in the implementations of GValue
lcopy_func are runtime checks which could be disabled if one wants and therefore
should be handled as such with g_return_val_if_fail()
Making this validation code public allows projects to validate a
GParamSpec name before creating it. While hard-coded GParamSpec don't
need this, we can't afford crashing the main program for dynamically
generated GParamSpec from user-created data.
In such case, we will need to validate the param names and return errors
instead of trying to create a GParamSpec with invalid names.
Includes modifications from Philip Withnall and Emmanuele Bassi to
rearrange the new function addition and split it into one function for
GParamSpecs and one for GSignals.
Inline with the stricter version of the property naming rules from the
documentation, tighten up the validation of property names at
installation time.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
There’s no need to have the property naming documentation in two places,
with one version of it being stricter than the other. Rationalise it to
one place, link to that consistently, and settle on the stricter
version.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #358
We cannot just call
G_PARAM_SPEC_GET_CLASS (pspec)->value_set_default (pspec, &dflt_value);
without initializing the GValue first. It would call
param_string_set_default(), which would set the pointer value
to a cloned string (which later never gets released, because
the GValue is not known to hold a string).
Fixes: 6ad799ac67
Since we have the type of the GValue we're going to initialize, we can
allow passing an empty (but valid) GValue when retrieving the default
value of a GParamSpec.
This will eliminate additional checks and an unnecessary reset.
GValue g_type field is used for synchronization with g_once_init_enter,
and so it should be written to only with g_once_init_leave.
Replace structure copy with memcpy that copies the one remaining field
of GValue, i.e., data array.
Where we were already treating GHashTables as sets, modify them to use
the set-specific APIs g_hash_table_add() and g_hash_table_contains(), to
make that usage more obvious and less prone to being broken.
Heavily based on patches by Garrett Regier <garrettregier@gmail.com>.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749371
If we have an input parameter (or return value) we need to use (nullable).
However, if it is an (inout) or (out) parameter, (optional) is sufficient.
It looks like (nullable) could be used for everything according to the
Annotation documentation, but (optional) is more specific.
Add various (nullable) and (optional) annotations which were missing
from a variety of functions. Also port a couple of existing (allow-none)
annotations in the same files to use (nullable) and (optional) as
appropriate instead.
Secondly, add various (not nullable) annotations as needed by the new
default in gobject-introspection of marking gpointers as (nullable). See
https://bugzilla.gnome.org/show_bug.cgi?id=729660.
This includes adding some stub documentation comments for the
assertion macro error functions, which weren’t previously documented.
The new comments are purely to allow for annotations, and hence are
marked as (skip) to prevent the symbols appearing in the GIR file.
https://bugzilla.gnome.org/show_bug.cgi?id=719966
These cause a static analyzer to think we're trying to actually handle
them being NULL, which is not the case. They both must not be NULL,
period.
No idea why the code was like this originally.
Reviewed by mclasen on IRC.
Back in the far-off twentieth century, it was normal on unix
workstations for U+0060 GRAVE ACCENT to be drawn as "‛" and for U+0027
APOSTROPHE to be drawn as "’". This led to the convention of using
them as poor-man's ‛smart quotes’ in ASCII-only text.
However, "'" is now universally drawn as a vertical line, and "`" at a
45-degree angle, making them an `odd couple' when used together.
Unfortunately, there are lots of very old strings in glib, and also
lots of new strings in which people have kept up the old tradition,
perhaps entirely unaware that it used to not look stupid.
Fix this by just using 'dumb quotes' everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=700746
The way of getting the default value out of a GParamSpec is to allocate
a GValue, initialise it, then call g_param_spec_set_default() to set the
default value into that GValue.
This is exactly how we handle setting the default value for all of the
construct properties that were not explicitly passed to g_object_new().
Instead of doing the alloc/init/store on all construct properties on
every call to g_object_new(), we can cache those GValues in the private
data of the GParamSpec itself and reuse them.
This patch does not actually make that change to g_object_new() yet, but
it adds the API to GParamSpec so that a future patch to GObject can make
the change.
https://bugzilla.gnome.org/show_bug.cgi?id=698056
Either g_type_register_static_simple (used by G_DEFINE_TYPE_EXTENDED)
and G_IMPLEMENT_INTERFACE use automatic variables for GTypeInfo and
GInterfaceInfo structs, while tutorials and source code often use
static variables. This commit consistently adopts the former method.
https://bugzilla.gnome.org/show_bug.cgi?id=600161
All locks are now zero-initialised, so we can drop the G_*_INIT macros
for them.
Adjust various users around GLib accordingly and change the docs.
https://bugzilla.gnome.org/show_bug.cgi?id=659866
