Back in the far-off twentieth century, it was normal on unix
workstations for U+0060 GRAVE ACCENT to be drawn as "‛" and for U+0027
APOSTROPHE to be drawn as "’". This led to the convention of using
them as poor-man's ‛smart quotes’ in ASCII-only text.
However, "'" is now universally drawn as a vertical line, and "`" at a
45-degree angle, making them an `odd couple' when used together.
Unfortunately, there are lots of very old strings in glib, and also
lots of new strings in which people have kept up the old tradition,
perhaps entirely unaware that it used to not look stupid.
Fix this by just using 'dumb quotes' everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=700746
We have some testcases that assert that type modules are unloaded after
the last reference on them is dropped. Comment out those asserts now
that we turned the last unref into a no-op.
https://bugzilla.gnome.org/show_bug.cgi?id=693351
We only want to control the default visibility for our five main
installable libraries: libglib, libgthread, libgmodule, libgobject,
libgio. We should therefore only set -fvisibility=hidden when building
those.
Use a separate substitution variable for this purpose.
Using CFLAGS directly leads to some modules built in testcases not
exporting their symbols (and then the tests fail). It also affects the
fam file monitoring module.
Colin had originally done it this way in his visibility patch series but
I failed to understand why so I didn't copy it. Now I do.
Also: revert changes made to two testcases in an attempt to work around
this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=691756
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
1) use "../libtool" rather than "libtool" to avoid problems
with wacky OS X not-actually-libtool
2) Use libtool on the libtool script, not the binary, so that it
actually does anything
3) Don't use "gdb --ex" since it's apparently new-ish/non-portable.
https://bugzilla.gnome.org/show_bug.cgi?id=684723
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
I'm normally a big fan of small atomic commits, but I also want to get
things done this afternoon...
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=687441
Reviewed-by: Colin Walters <walters@verbum.org>
Very many testcases, some GLib tools (resource compiler, etc) and
GApplication were calling g_type_init().
Remove those uses, as they are no longer required.
https://bugzilla.gnome.org/show_bug.cgi?id=686161
"make check" was failing on sys/resource.h not being available on
win32. Seeing that this test just spews some numbers on stdout
whithout really testing anything we can safely replace them with
similar enough numbers by relying on g_get_monotonic_time ().
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=682386
gdb by default will only print strings up to 200 characters. After that
it abbreviates them. This affects the run-assert-msg-test.sh script if
the path to the glib installation is too long (in our case it was 133
characters, 132 would still have worked...)
By having gdb execute "set print elements 0" before printing the assert
string, the limit on maximum number of characters to print is set to
unlimited.
Signed-off-by: Peter Kjellerstedt <pkj@axis.com>
https://bugzilla.gnome.org/show_bug.cgi?id=670218
These don't really matter, since it's test code, but they do obscure
real leaks in the library.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=666115
Acked-by: Matthias Clasen <mclasen@redhat.com>
Either g_type_register_static_simple (used by G_DEFINE_TYPE_EXTENDED)
and G_IMPLEMENT_INTERFACE use automatic variables for GTypeInfo and
GInterfaceInfo structs, while tutorials and source code often use
static variables. This commit consistently adopts the former method.
https://bugzilla.gnome.org/show_bug.cgi?id=600161
Any flags specified as well as "all" are subtracted from the result,
allowing the user to specify FOO_DEBUG="all,bar,baz" to mean "give me
debugging information for everything except bar and baz".
https://bugzilla.gnome.org/show_bug.cgi?id=642452
These were the last users of the dynamic allocation API.
Keep the uses in glib/tests/mutex.c since this is actually meant to test
the API (which has to continue working, even if it is deprecated).
https://bugzilla.gnome.org/show_bug.cgi?id=660739
All locks are now zero-initialised, so we can drop the G_*_INIT macros
for them.
Adjust various users around GLib accordingly and change the docs.
https://bugzilla.gnome.org/show_bug.cgi?id=659866
The documentation for G_TYPE_CHAR says:
"The type designated by G_TYPE_CHAR is unconditionally an 8-bit signed
integer."
However the return value for g_value_get_char() was just "char" which
in C has an unspecified signedness; on e.g. x86 it's signed (which
matches the GType), but on e.g. PowerPC or ARM, it's not.
We can't break the old API, so we need to suck it up and add new API.
Port most internal users, but keep some tests of the old API too.
https://bugzilla.gnome.org/show_bug.cgi?id=659870
Replace it with g_thread_create_with_stack_size() and a real function
implementation of g_thread_create().
Modify a testcase that was calling g_thread_create_full()
inappropriately (it was using the default values anyway).
G_THREADS_ENABLED still exists, but is always defined. It is still
possible to use libglib without threads, but gobject (and everything
above it) is now guaranteed to be using threads (as, in fact, it was
before, since it was accidentally impossible to compile with
--disable-threads).
https://bugzilla.gnome.org/show_bug.cgi?id=616754
At the same time, also add g_mkdtemp_full and g_dir_make_tmp
variants. The patch also unifies the unique-name-generating
code for all variants of mkstemp and mkdtemp and adds tests
for the new functions.
Based on patches by Paolo Bonzini,
http://bugzilla.gnome.org/show_bug.cgi?id=118563
If we are going to fail an assert, wait for a bit longer before doing so
(up to 5 seconds, if needed).
This is a long-standing Debian patch to fix build failures on really
slow machines.
g_thread_init() causes a hash table to be allocated (in read_aliases).
Since hash tables are now a bit larger, we need to bump one of the
probe sizes to avoid our probe slice being used for the aliases
hash table.
Of course, a proper implementation of close() will just ignore an
invalid parameter silently, and set errno. But apparently the "debug"
version of the Microsoft C library generates some noise in this
case. So avoid that. Thanks to John Emmas for reporting.
These allow applications to give meaningful names to their sources.
Source names can then be used for debugging and profiling, for
example with systemtap or gdb.
https://bugzilla.gnome.org/show_bug.cgi?id=606044
For some reason, even though the tests are linked against libgobject.la
and libgobject.la mentions libglib.la as a dependency, the tests are
running against the system glib instead of the in-tree one.
Adding the libglib.la file as an explicit LDFLAG fixes it.
Re-using glibc's __abort_msg symbol causes linking problems, since the symbol
is declared private. Always use our own__glib_abort_msg symbol to store
assertion messages, to avoid compatibility and linking problems.
Also fix the test case to work with out of tree builds (such as "make
distcheck"), and re-enable it.
https://bugzilla.gnome.org/show_bug.cgi?id=594872
It makes the IBM XL C Compiler (the 'native' non-free compiler
on the AIX 5.3 and 6.1 platform) stop compiling with syntax error.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=581300
Signed-off-by: Javier Jardón <jjardon@gnome.org>
Crash interception/debugging systems like Apport or ABRT capture core dumps for
later crash analysis. However, if a program exits with an assertion failure,
the core dump is not useful since the assertion message is only printed to
stderr.
glibc recently got a patch which stores the message of assert() into the
__abort_msg global variable.
(http://sourceware.org/git/?p=glibc.git;a=commitdiff;h=48dcd0ba)
That works fine for programs which actually use the standard C assert() macro.
This patch adds the same functionality for glib's assertion tests. If we are
building against a glibc which already has __abort_msg (2.11 and later, or
backported above git commit), use that, otherwise put it into our own field
__glib_assert_msg.
Usage:
$ cat test.c
#include <glib.h>
int main() {
g_assert(1 < 0);
return 0;
}
$ ./test
**ERROR:test.c:5:main: assertion failed: (1 < 0)
Aborted (Core dumped)
$ gdb --batch --ex 'print (char*) __abort_msg' ./test core
[...]
$1 = 0x93bf028 "ERROR:test.c:5:main: assertion failed: (1 < 0)"
https://bugzilla.gnome.org/show_bug.cgi?id=594872
These are basic performance test for a couple of basic gobject
primitives:
* construction of simple objects. Simple is a bare gobject derived
class with no properties, signals or interfaces.
* construction of complex objects. Complex is a gobject subclass
with construct properties, normal properties, signals, and
implements an interface.
* run-time type check of complex objects
* signal emissions
Lots of care is taken to try to make the results reproducible. Each
test is run for multible "rounds", where we try to make each round be
"not too short" in order to be significant wrt timer accuracy, but
also "not to long" to make the probability of some other random event
happening on the system (interrupts, other process scheduled, etc)
during the round less likely.
The current target round time is 4 msecs, which was picked without
rigour, but seems small wrt e.g. scheduler time.
For each test we then run the calculated round size for 60 seconds,
and then report the performance based on the minimal time of one
round. The model here is that any random stuff that happens during a
round can only slow it down, there is nothing that can make it go
faster, so the minimal time is the best estimate of how fast one round
goes.
The result is not ideal, even on a "idle" system the results vary
from round to round, but the variation seems to be less than 1%.
So, any performance difference reported by this test over 1% is
probably statistically significant.
Additionally the tests can be run with or without threads being
initialized. The script tests/gobject/run-performance.sh makes
it easy to produce a performance report for the current checkout.
https://bugzilla.gnome.org/show_bug.cgi?id=557100
g_simple_async_result_complete() now checks that it's being run from
the correct main loop, so tests/gio/simple-async-result was failing,
because it called it from outside any main loop. (And gio's pltcheck
was failing because I hadn't added g_main_current_source() to it.)
