When an object is revitalized and a notify callbacks increased the reference
counter of the object, we are calling the toggle notifier twice, while it
should only happen if also the actual reference count value is 1 (after
having been decremented from 2).
If an object gets revitalized during the dispose vfunc, we need to call
toggle refs notifiers only if we had 2 references and if the object has
the toggle references enabled.
This may change in case an object notifier handler changes this status,
so do this check only after we've called the notifiers so that in case
toggle notifications are enabled afterwards we still call the handlers.
Otherwise this test will succeed at build-time, but will fail when run
as an as-installed test via ginsttest-runner.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This can be used to mark entire types as deprecated,
and trigger a warning when they are instantiated
and `G_ENABLE_DIAGNOSTIC=1` is set in the environment.
There's currently no convenient macros for defining
types with the new flag, but you can do:
```c
_G_DEFINE_TYPE_EXTENDED_BEGIN (GtkAppChooserWidget,
gtk_app_chooser_widget,
GTK_TYPE_WIDGET,
G_TYPE_FLAG_DEPRECATED)
...
_G_DEFINE_TYPE_EXTENDED_END ()
```
Includes a unit test by Philip Withnall.
The SPDX-License-Identifier said LGPL-2.1-or-later, but the license
grant was a permissive license, which we now identify as
LicenseRef-old-glib-tests.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Some of GLib's unit tests are under an apparently GLib-specific
permissive license, vaguely similar to the BSD/MIT family but with the
GPL's lack-of-warranty wording. This is not on SPDX's list of
well-known licenses, so we need to use a custom license name prefixed
with LicenseRef if we want to represent this in SPDX/REUSE syntax.
Most of the newer tests seem to be licensed under LGPL-2.1-or-later
instead.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This allows them to be referenced in other symbols value computation.
In addition, this fixes the automatically assigned value of a public
symbol that is preceded by a private one:
typedef enum {
/*< private >*/
ENUM_VALUE_PRIVATE,
/*< public >*/
ENUM_VALUE_PUBLIC, <--- value is 1, not 0.
} SomeExampleEnum;
We have tests that are failing in some environments, but it's
difficult to handle them because:
- for some environments we just allow all the tests to fail: DANGEROUS
- when we don't allow failures we have flacky tests: A CI pain
So, to avoid this and ensure that:
- New failing tests are tracked in all platforms
- gitlab integration on tests reports is working
- coverage is reported also for failing tests
Add support for `can_fail` keyword on tests that would mark the test as
part of the `failing` test suite.
Not adding the suite directly when defining the tests as this is
definitely simpler and allows to define conditions more clearly (see next
commits).
Now, add a default test setup that does not run the failing and flaky tests
by default (not to bother distributors with testing well-known issues) and
eventually run all the tests in CI:
- Non-flaky tests cannot fail in all platforms
- Failing and Flaky tests can fail
In both cases we save the test reports so that gitlab integration is
preserved.
In principle we could script this so that each max-version.c is compiled
26 times, once per possible MAX_VERSION, but I haven't implemented
that here: just pinning to the oldest possible version is sufficient to
reproduce #2796.
These aren't included in the installed-tests, since they don't really
do anything at runtime (the important thing is that they compile
without warnings).
Reproduces: #2796
Signed-off-by: Simon McVittie <smcv@collabora.com>
When collecting varargs, ignore the NOCOPY_CONTENTS
flag for variants. That is what our docs advice for
refcounted types, and it fixes a regression that
was inadvertendly introduced when we stopped doing
some extra GValue copies.
Includes a test case by Philip Withnall.
Fixes: #2774
For unclear reasons, universal_newlines=True doesn't seem to set the
text encoding correctly. Even if I set only encoding='utf-8', the test
fails. The combination here works for me, \o/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This goes undiagnosed under normal circumstances, but is a critical
warning (which is fatal by default) under G_ENABLE_DIAGNOSTIC. This is a
programming error, so we should only exercise it under
g_test_undefined(), and only in a test that is intentionally doing this
(as in the previous commit).
Signed-off-by: Simon McVittie <smcv@collabora.com>
This was previously exercised (probably by mistake) in
gobject/tests/type.c, but without making any assertions about what
happened, and the test would fail under G_ENABLE_DIAGNOSTIC if GLib was
compiled with debug enabled.
Signed-off-by: Simon McVittie <smcv@collabora.com>
We've various macros definitions that are depending using C++ features
that may not work in all the standard versions, so recompile the cxx
tests that we have in all the ones we want to support.
GCC isn't smart enough to recognise that the assertion on the size of
N_PROPERTIES also affects the assertion on the GParamSpec array access,
so we need to coalesce the two checks into one to avoid an array-bounds
compiler warning.
All of these warnings indicate programmer error, so critical is most
appropriate here.
Exceptions: deprecation warnings are just warnings. Also, warnings that
are worded with uncertainty can remain warnings rather than criticals.
The prefix for GMarkupParseFlags enumeration members is G_MARKUP; this
means that G_MARKUP_PARSE_FLAGS_NONE gets split into
GLib.MarkupParseFlags.PARSE_FLAGS_NONE by the introspection scanner.
The `/*< nick=none >*/` trigraph attribute is a glib-mkenum thing, and
does not affect the introspection scanner; it would also only affect the
GEnumValue nickname, which is not used by language bindings to resolve
the name of the enumeration member. Plus, GMarkupParseFlags does not
have a corresponding GType anyway.
ginsttest-runner defaults to timing out each test after 5 minutes,
but gobject/tests/performance/performance.c defaults to running each
of 18 tests for 15 seconds. The result is close enough to 5 minutes
that the setup overhead is enough to make it time out.
We're only running these tests to prove that they still work, not to
get meaningful performance numbers, so cut them down to 1 second per
test-case (the result of which is that performance.c takes about a
minute).
Signed-off-by: Simon McVittie <smcv@collabora.com>
We don't need a cpp toolchain for building glib so lets just
automatically disable tests requiring one when not available.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
We're calling g_object_notify so let's not make gobject to call it for
us.
This also allows to test that changing a property again doesn't lead to
dispatch properties being called.
This tests that we call a custom dispatch_properties_changed,
even in the absence of connected notify handlers. (A recent
optimization broke that and caused a regression in GTK).
Add tests in which `g_object_run_dispose()` is called on the source or target
of a `GBinding`. After commit a4fa456e67,
the target test caused a failed assertion in `g_weak_ref_set()` that was not
found by the existing tests. Commit 94ba14d542
weakens the assertion to allow the test to succeed.
See https://gitlab.gnome.org/GNOME/glib/-/issues/2676
This makes calls to g_signal_connect_data() and g_signal_connect_object()
with default flags more self-documenting.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Pass arguments to them so that they take minimal time. This will not
produce useful performance profiling results, but will smoketest that
the tests still run, don’t crash, and therefore probably aren’t
bitrotting too badly.
This is useful because a fair amount of work has gone into these
performance tests, and they’re useful every few years to analyse and
compare GObject performance. We don’t want them to bitrot between uses.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When running the test with `-s 0` it would previously crash. Fix that,
and make it so that it only does a single test run in that case.
This will be useful in an upcoming commit for smoketesting the test to
avoid bitrot.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Beef up the singleton testcase to reproduce a
freeze count underflow when setting properties
at construction time, with a custom constructor.
Helps: #2666
These are deprecated, but it’s easy enough to test them anyway. This
bumps up code coverage a bit and hopefully ensures we don’t accidentally
regress on them in future.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
At the moment these tests basically just ensure that the program’s
compiled properly and doesn’t crash on startup. They don’t check
functionality very deeply.
But they’re a start.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This doesn’t change the tests’ behaviour, but moves them to a slightly
more logical location.
They are still not installed or run by default.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1434
Install the properties with a mixture of
g_object_class_install_properties and
g_object_class_install_properties, and verify
that finding them still works, regardless of
whether we use string literals or not.
These have all been added manually, as I’ve finished all the files which
I can automatically detect.
All the license headers in this commit are for LGPL-2.1-or-later, and
all have been double-checked against the license paragraph in the file
header.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
Add SPDX license (but not copyright) headers to all files which follow a
certain pattern in their existing non-machine-readable header comment.
This commit was entirely generated using the command:
```
git ls-files gobject/tests/*.[ch] | xargs perl -0777 -pi -e 's/\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/\n \*\n \* SPDX-License-Identifier: LGPL-2.1-or-later\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/igs'
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
None of these messages are particularly helpful, but they increase the
overall test log output size, which has to be stored by the CI for every
test run.
With these messages removed, the size of a full test log is reduced from
6.5MB to 1.8MB for me.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Modified by Philip Withnall to omit the subdirectory and drop the
`refcount` suite as both seem like unnecessary over-categorisation.
Related to issue #1434
Much like GBindingGroup, the GSignalGroup object allows you to connect many
signal connections for an object and connect/disconnect/block/unblock them
as a group.
This is useful when using many connections on an object to ensure that they
are properly removed when changing state or disposing a third-party
object.
This has been used for years in various GNOME projects and makes sense to
have upstream instead of multiple copies.
Originally, GBindingGroup started with Builder as a way to simplify all
of the third-degree object bindings necessary around Model-Controller
objects such as TextBuffer/TextView.
Over time, it has grown to be useful in a number of scenarios outside
of Builder and has been copied into a number of projects such as GNOME
Text Editor, GtkSourceView, libdazzle, and more.
It makes sense at this point to unify on a single implementation and
include that upstream in GObject directly alongside GBinding.
