Some (broken) toolchains for example trip up
-Werror=missing-prototypes in system headers. This patch allows
people to skip the formerly hardcoded "baseline" warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=694757
If a GNetworkAddress is created with a hostname like "fe80::xxx%em1",
make sure that the scope_id corresponding to "em1" is present in the
GSocketAddresses it returns when used as a GSocketConnectable.
https://bugzilla.gnome.org/show_bug.cgi?id=684404
Add GSimpleProxyResolver, for letting people do static proxy
resolution, and to use as a base class for other resolvers (such as
GProxyResolverGnome).
https://bugzilla.gnome.org/show_bug.cgi?id=691105
Add a proxy-resolver property to GSocketClient, to allow overriding
proxy resolution in situations where you need to force a particular
proxy rather than using the system defaults.
https://bugzilla.gnome.org/show_bug.cgi?id=691105
This is a GLib reimplementation of dbus_address_escape_value().
It's useful if you want to construct a D-Bus address from pieces:
for instance, if you have a listening Unix socket whose path is known,
and you want to connect a D-Bus peer to it.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=693673
Reviewed-by: Colin Walters <walters@verbum.org>
[amended to add Since: 2.36 as per review]
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
While compiling, libtool will say that undefined symbols are not allowed, and
will refuse to make you a dll. This is only one line, easy to miss. And it
doesn't prevent `make' from completing successfully.
The code this patch adds is from other Makefile.am files that use
$(no_undefined). It's absence in gio is, most likely, an oversight.
Fixes#692058
The flowinfo and scope_id fields of struct sockaddr_in6 are in host
byte order, but the code previously assumed they were in network byte
order. Fix that.
This is an ABI-breaking change (since before you would have had to use
g_ntohl() and g_htonl() with them to get the correct values, and now
that would give the wrong values), but the previous behavior was
clearly wrong, and no one ever reported it, so it is likely that no
one was actually using it.
https://bugzilla.gnome.org/show_bug.cgi?id=684404
Add read_async() and skip_async() tests to buffered-input-stream.
Fix and re-enable filter-streams's existing close_async() tests, and
add read_async(), skip_async(), and write_async() tests as well. Also,
redo the tests to use dummy GFilterInputStream and GFilterOutputStream
subclasses rather than GBufferedInput/OutputStream, so that we're
testing the base filter stream implementations of everything (since
the buffered stream overrides are already getting tested in the
buffered-input-stream and buffered-output-stream tests anyway).
Add a skip_async() test to unix-streams. (This one would crash without
the bugfix in the previous commit.)
We only want to control the default visibility for our five main
installable libraries: libglib, libgthread, libgmodule, libgobject,
libgio. We should therefore only set -fvisibility=hidden when building
those.
Use a separate substitution variable for this purpose.
Using CFLAGS directly leads to some modules built in testcases not
exporting their symbols (and then the tests fail). It also affects the
fam file monitoring module.
Colin had originally done it this way in his visibility patch series but
I failed to understand why so I didn't copy it. Now I do.
Also: revert changes made to two testcases in an attempt to work around
this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=691756
One of our testcases builds a small giomodule for testing the loading of
modules containing resources. Unfortunately, this module gets built
using the same CFLAGS as the rest of GLib, including the visibility
flags (defaulting to hidden).
Use "config.h" to get a declaration of _GLIB_EXTERN that will export
symbols properly and use it to annotate the necessary APIs.
Some OS (e.g. OpenBSD) do not implement IP v4-mapped addresses. When
this is the case, then we get a "Connection refused", so force the test
to pass to that further tests can run.
https://bugzilla.gnome.org/show_bug.cgi?id=686058
a5876e5f made GMemoryInputStream subclassable, but accidentally broke
read_async() and skip_async() in the process. The immediately
following e7983495 fixed read_async() (and added a test for it), but
skip_async() accidentally got... skipped.
Fix it now and add a test for it.
Also, GMemoryInputStream's skip_async() was assuming that skip() could
never fail, which is true of its own implementation, but might not be
true of a subclass's, so do proper GError handling too.
This will let us drop the dbus-python dependency.
The C version does not 100% reproduce all the hash table
and array manipulation of the python version, but the tests
do not rely on it anyway.
This greatly simplifies the test since everything is now in a single
process and possible bugs / quirks in libdbus-1 will not interfere
with the tests. On the other hand, we no longer test interoperability
with libdbus-1. This is somewhat moot, however, since other tests that
involve a message bus (e.g. GTestDBus users which include most of the
GDBus test suite itself) will test this.
Also ensure that we don't pollute existing D-Bus keyrings for the
DBUS_COOKIE_SHA1 authentication method (e.g. files in the
~/.dbus-keyrings directory) by setting the environment variables
G_DBUS_COOKIE_SHA1_KEYRING_DIR and
G_DBUS_COOKIE_SHA1_KEYRING_DIR_IGNORE_PERMISSION.
All in all, this change avoids some thorny issues where the GDBus and
libdbus-1 implementations disagree on whether an item in the D-Bus
keyring is still valid (items have an age etc.). In reality, since the
DBUS_COOKIE_SHA1 authentication method is never used in production,
this is never hit in production. This bug was, however, frequently hit
if you just ran the test suite repeatedly for 15 minutes or so.
Also add TODO items to mention that we currently don't test corner
cases involving
- DBUS_COOKIE_SHA1 timeouts
- libdbus-1 interoperability
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
If tasks block waiting for other tasks to complete then the system can
end up starved for threads. Avoid this by bumping up max-threads in
that case.
This also reverts 7b1f8c58 and reverts max-threads for GTask's
GThreadPool back to 10.
https://bugzilla.gnome.org/show_bug.cgi?id=687223
This is a new convenience method designed to simplify some use
cases of GFileEnumerator, by making it easy to get the next file
from a file enumerator.
https://bugzilla.gnome.org/show_bug.cgi?id=690083
Install a public "gnetworking.h" header that can be used to include
the relevant OS-dependent networking headers. This does not really
abstract away unix-vs-windows however; error codes, in particular,
are incompatible.
gnetworkingprivate.h now contains just a few internal URI-related
functions
Also add a g_networking_init() function to gnetworking.h, which can be
used to explicitly initialize OS-level networking, rather than having
that happen as a side-effect of registering GInetAddress.
https://bugzilla.gnome.org/show_bug.cgi?id=623187
The three processes this test creates need to be executed
in order, and g_usleep was used to guarantee that.
However, under heavy load, that is not enough. Instead,
wait until the children start by making sure they have
written to stdout before proceeding any further.
https://bugzilla.gnome.org/show_bug.cgi?id=664627
Really, the memory output stream API is too warped around the model
where it's a fixed size buffer that you've already allocated. Even in
C, I find myself always wanting to use it to just accumulate data into
an arbitrary-sized buffer it allocates.
Unfortunately, it's also not usable from bindings because it's not
common to bind g_free() and g_realloc(), but if you just pass NULL, you
get the default of a fixed size, which is useless as per above.
I am going to use this from a gjs test case, and the GSubprocess test
cases also will use it.
https://bugzilla.gnome.org/show_bug.cgi?id=688931
Darwin's poll doesn't change revents if there are no available events, though it returns 0. Initialize the fd.revents to 0 so that the test passes.
That reveals a test failure, though, because with socket streams it takes time for an event to pass through the socket. Provide an 80-usec delay to allow time for the propagation.
Allow GDBusObjectManagerClient to work on peer to peer DBus
connections. Don't require that a unique bus name is available
for the object manager, if the owned bus name is NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=686920
Sometimes the poll duration in the /socket/timed_wait test is slightly
bigger than the requested 100000, causing failures like:
GLib-GIO:ERROR:socket.c:620:test_timed_wait:
assertion failed (poll_duration < 110000): (110057 < 110000)
Adjust the test to allow some jitter in the "too high" direction.
https://bugzilla.gnome.org/show_bug.cgi?id=686458
Very many testcases, some GLib tools (resource compiler, etc) and
GApplication were calling g_type_init().
Remove those uses, as they are no longer required.
https://bugzilla.gnome.org/show_bug.cgi?id=686161
GTask is a replacement for GSimpleAsyncResult and GIOScheduler, that
also allows for making cancellable wrappers around non-cancellable
functions (as in GThreadedResolver).
https://bugzilla.gnome.org/show_bug.cgi?id=661767
This is the expected (and sane) behavior - without this bug-fix you'd
have to add "Since" to every member of a newly added D-Bus interface.
Also show-case this in the codegen example.
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
Adding the --sourcedir option fixes these:
/path/to/src/gio/tests/test2.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
/path/to/src/gio/tests/test3.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
/path/to/src/gio/tests/test4.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
/path/to/src/gio/tests/test.gresource.xml: Error on line 5 char 1: Failed to locate 'test1.txt' in current directory.
The test was assuming that all cancelled ops would finish within a
certain amount of time, but this often failed under valgrind. Instead,
just run the loop until all of the ops have actually finished.
https://bugzilla.gnome.org/show_bug.cgi?id=682560
On slower platforms, the overhead of the 240 D-BUS Sleep calls is larger than
the current maximum of 6 seconds. A run on a Panda board sometimes fails with
ERROR:/build/buildd/glib2.0-2.33.8/./gio/tests/gdbus-threading.c:409:test_method_calls_on_proxy:
assertion failed (elapsed_msec < 6000): (7365 < 6000)
Bump maximum time to 8 seconds to be more resilient to this.
https://bugzilla.gnome.org/show_bug.cgi?id=682222
Because it now handles EINTR. And we should do so. While most people
use Linux, which tries very hard to avoid propagating EINTR back up
into userspace, it can still happen.
https://bugzilla.gnome.org/show_bug.cgi?id=682833
The async test had several problems:
- It created a proxy and did not launch a main loop, meaning that its
callback would usually not get called, or, if it did get called, the
test harness would have taken down the connection already, causing an
assertion failure when the proxy had an error.
- It was dependent on the proxy test to set up the server and would fail
because some properties were modified by that test.
https://bugzilla.gnome.org/show_bug.cgi?id=674805
* In order to add contstruct properties to an abstract base
calls, and retain ABI stability, the base class must add a
default implementation of those properties.
* We cannot add a default implementation of certificate-bytes
or private-key-bytes since certificate and private-key properties
are writable on construct-only.
This reverts commit 541c985869.
https://bugzilla.gnome.org/show_bug.cgi?id=682081
Implement test case suggested by Ryan Lortie on bug:
https://bugzilla.gnome.org/show_bug.cgi?id=679288
"There is a potential race here that's really unlikely to happen, but
here we go: We are trying to read from the same socket in two threads.
Some data comes. That causes the poll() in both threads (above) to
finish running. Then the cancellable is checked above. We now find
ourselves here. Only one thread will read the data. The other will
block on this function. Then the user may cancel the cancellable while
we are blocked here, but we will stay blocked...."
test_create_delete() assumes that if it creates a file and then
immediately deletes it, that the file monitor will notice this and
record it as a create followed by a delete. But that won't work with
GPollFileMonitor, which will just think nothing changed. So skip the
test in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=669331
This looks like it was stubbed out but not implemented; the vtable
entry dates to commit 3781343738 which
is just alex's initial merge of gio into glib.
I was working on some code that wants an asynchronous rm -rf
equivalent, and so yeah, this is desirable.
https://bugzilla.gnome.org/show_bug.cgi?id=680760
Add a test that the decompressor input streams handle truncated data
correctly. (They do; I wrote the test thinking there was a bug there,
but there isn't.)
Also, rename the "corruption" tests to "roundtrip", since "corruption"
makes it sound like we're testing how the converters deal with
corrupted data, as opposed to merely testing that they don't corrupt
data themselves. And fix the bug reference.
Many (if not "almost all") programs that spawn other programs via
g_spawn_sync() or the like simply want to check whether or not the
child exited successfully, but doing so requires use of
platform-specific functionality and there's actually a fair amount of
boilerplate involved.
This new API will help drain a *lot* of mostly duplicated code in
GNOME, from gnome-session to gdm. And we can see that some bits even
inside GLib were doing it wrong; for example checking the exit status
on Unix, but ignoring it on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=679691
For a D-Bus property with name "Type" (fairly common), we used to
generate a GObject property with name "type-" and C accessors
get_type_() (to avoid clashing with the GType getter), set_type_()
(for symmetri).
However, the rules for GObject property names are fairly rigid and
specifically prohibit names ending in a dash.
Therefore change things so the chosen GObject property name is "type"
but preserve the naming rules for the C getter and setter (for the
same reasons: avoiding name clashing and symmetri).
This change does break the API of generated code (but only on the
GObject property level, the C symbols are not changed) but strictly
speaking the behavior was undefined since "type-" was an invalid
GObject property name.
Also add a test case for this.
Bug 679473.
https://bugzilla.gnome.org/show_bug.cgi?id=679473
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
After fixing bug 674452 this test case now reliably fails, as "ABC abc" is text
and definitively not PowerPoint. It previously worked as g_content_type_guess()
was reading beyond the boundary of the data due to specifying -1 as data
length.
Update that test case to expect a PO template instead, and add two more with a
definitive PO template syntax and some binary data. We do not currently have a
MIME magic for PowerPoint, so we cannot actually detect it with certainty, but
at least make sure that the returned MIME type is correct.
https://bugzilla.gnome.org/show_bug.cgi?id=678941
g_content_type_guess() requires specifying a valid data length. Fixes a
segfault when running the test.
Also add an explicit check for this and return XDG_MIME_TYPE_UNKNOWN when
data_size is specified as -1, to avoid crashing.
https://bugzilla.gnome.org/show_bug.cgi?id=674452
Sometimes the poll duration in the /socket/timed_wait test is slightly lower
than the requested 100000, causing failures like
ERROR:/build/buildd/glib2.0-2.33.2/./gio/tests/socket.c:619:test_timed_wait:
assertion failed (poll_duration > = 100000): (99240 >= 100000)
FAIL
Adjust the test to also allow some jitter in the "too small" direction, similar
to the already existing span for "slightly too large".
https://bugzilla.gnome.org/show_bug.cgi?id=678881
make sure the proxy threads are in the "waiting for a connection"
state when we do the final cleanup, or else there are race conditions
involving which thread processes the GCancellable cancellation first.
Reading from a GConverterInputStream with both input_buffer and
converted_buffer non-empty would return bogus data (the data from
converted_buffer would essentially get skipped over, though the
returned nread reflected what the count would be if it hadn't been).
This was never noticed before because (a) it can't happen if all of
your reads are at least as large as either the internal buffer size or
the remaining length of the stream (which covers most real-world use),
and (b) it can't happen if all of your reads are 1 byte (which covers
most of tests/converter-test). (And (c) it only happens for some
converters/input streams.) But this was happening occasionally in
libsoup when content-sniffing a gzipped response, because the
SoupContentSnifferStream would first read 512 bytes (to sniff), and
then pass through larger reads after that.
Fixed and added a test to converter-test.
https://bugzilla.gnome.org/show_bug.cgi?id=676478
When the application is using its D-Bus backend, it is useful to be able
to export extra D-Bus objects at the right time, i.e. *before* the application
tries to own the bus name. This is accomplished here by adding a hook
in GApplicationClass for this; and a corresponding hook that will be called
on unregistration to undo whatever the register hook did.
Bug #675509.
Using a caller-supplied buffer for g_input_stream_read() doesn't
translate well to the semantics of many other languages, and using a
non-refcounted buffer for read_async() and write_async() makes it
impossible to manage the memory correctly currently in
garbage-collected languages.
Fix both of these issues by adding a new set of methods that work with
GBytes objects rather than plain buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=671139
Rather than depending on the host's DNS configuration to properly
return an error for a non-existent hostname, just substitute in
a dummy GResolver implementation that does it for us.
This essentially adds an accessor for the MimeType field in desktop files,
to retrieve the list of all mime types supported by an application.
The interface though is part of GAppInfo, so it could be implemented
in the future by other backends.
https://bugzilla.gnome.org/show_bug.cgi?id=674111
