In cases where performance are critical it can be useful to disable
checks and asserts. GStreamer has those options too, using the same name
and setting them yielding means we can set those options on the main
project (e.g. gst-build) and glib will inherit the same value when built
as subproject.
`get_option('buildtype')` will return `'custom'` for most combinations
of `-Doptimization` and `-Ddebug`, but those two will always be set
correctly if only `-Dbuildtype` is set. So we should look at those
options directly.
For the two-way mapping between `buildtype` and `optimization`
+ `debug`, see this table:
https://mesonbuild.com/Builtin-options.html#build-type-options
The test code can be built on Windows using Cygwin or MSYS2.
Even though it's test code, it might bring assertion dialog box
for native Windows while meson configure.
There were a couple of custom paths which could end up being relative,
rather than absolute, due to not properly prefixing them with
`get_option('prefix')`.
The use of `join_paths()` here correctly drops all path components
before the final absolute path in the list of arguments. So if someone
configures GLib with an absolute path for `gio_module_dir`, that will be
used unprefixed; but if someone configures with a relative path, it will
be prefixed by `get_option('prefix)`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1919
This is required to be able to build the doc. The debian docker is still
pinned to 0.49.2 which ensure we can build with both versions of meson.
Meson 0.52.0 warns about adding -Wall flag manually, we can remove that
because warning_level=1 (the default) option already implies it.
By default (on POSIX) we would be inheriting thread priorities from the
thread that pushed a new task on non-exclusive thread pools and causes a
new thread to be created. This can cause any non-exclusive thread pool
to accidentally contain threads of different priorities, or e.g. threads
with real-time priority.
To prevent this, custom handling for setting the scheduler settings for
Linux and Windows is added and as a fallback for other platforms a new
thread is added that is responsible for spawning threads for
non-exclusive thread pools.
Fixes https://gitlab.gnome.org/GNOME/glib/issues/1834
It's not supported on macOS' clang compiler and will fail the visibility
check and thus make the G_GNUC_INTERNAL attribute do nothing.
Compiler stderr:
/var/folders/nt/j2v2x4wd5cl33fq27mm31mwc0000gn/T/tmpxxf2zzi_/testfile.c:13:19: error: target does not support 'protected' visibility; using 'default' [-Werror,-Wunsupported-visibility]
__attribute__ ((visibility ("protected")))
^
1 error generated.
Checking if "GNU C visibility attributes test" compiles: NO
When choosing the type to base `size_t` on, check the compatibility of
passing pointers, as well as the width of the type, to avoid compiler
warnings in future.
For now, the code to do the checks is fairly ugly due to limitations in
Meson. In particular, the new checks are limited to gcc and clang (other
compilers will behave as before), and they are all duplicated. See the
comments in the code for links to Meson improvement requests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1777
If we're cross-compiling, the installed-tests are useful even if we
can't run them on the build machine: we can copy them to the host
machine (possibly via a distro package like Debian's libglib2.0-tests)
and run them there.
While I'm changing the build-tests condition anyway, deduplicate it.
Based on a patch by Helmut Grohne.
Bug-Debian: https://bugs.debian.org/941509
Signed-off-by: Simon McVittie <smcv@collabora.com>
We already depend on Meson 0.49.2, which depends on Python 3.5, so we’ve
actually implicitly had this requirement for a while. Might as well make
it explicit.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Instead of letting each directory to find its way to link with libdl,
it is easier to put the check in the top level, so its result can be
used by all directories.
It is a follow-up of https://gitlab.gnome.org/GNOME/glib/merge_requests/810.
Also set the Windows version to be 10 or newer when targeting UWP, since
the Windows 8 SDK does not have many of the APIs we need, such as
_beginthreadex.
We cannot bump to the latest stable version of Meson, even if it would
make our life easier. We can, though, use the version of Meson shipped
by the next, soon to be released Debian stable.
We're using the `install` argument for configure_file() all over the
place.
The support for an `install` argument for configure_file() was added in
Meson 0.50, but we haven't bumped the minimum version of Meson we
require, yet; which means we're getting compatibility warnings when
using recent versions of Meson, and undefined behaviour when using older
versions.
The configure_file() object defaults to `install: false`, unless an
install directory is used. This means that all instances of an `install`
argument with an explicit `true` or `false` value can be removed,
whereas all instances of `install` with a value determined from a
configuration option must be turned into an explicit conditional.
The plugin modules in these tests get statically linked with a separate
copy of GLib so they end up calling vfuncs in their own copy of GLib.
Fixes#1648
GLib checks for __sync_bool_compare_and_swap, and requires
__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4 to be defined if the function is available,
except with special cases like Linux armv5.
Extend the existing workaround to unbreak on old gcc versions that implement
__sync_bool_compare_and_swap but don't provide __GCC_HAVE_* macros.
We need to enable building the dirent and gnulib sources for clang-cl,
as we are still using the Microsoft-style headers and lib's and CRT.
We need to also do this for the following, for similar reasoning:
-Symbol export (via __declspec(dllexport))
-Dependency discovery without pkg-config files
-long long and ssize_t detection
We do, however, enable the autoptr tests for clang-cl builds. Note that
at this point real MSVC builds are still better supported than clang-cl
builds, and it will likely remain so for at least the near future,
alhtough real MSVC builds of the GTK stack are consumable and are usable
by clang-cl.
We are still seeing occasional CI failures due to timeouts when heavily
loaded. It’s best to wait a little longer than to throw all the results
out when they’re almost done.
For example, see https://gitlab.gnome.org/tristan957/glib/-/jobs/331330.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The code in gunicollate uses __STDC_ISO_10646__ to check that wchar.h is avilable,
that it includes the wide character related functions and that sizeof(wchar_t) == 4.
cygwin defines __STDC_ISO_10646__ and has sizeof(wchar_t) == 2 and the C standard text isn't
that clear on whether wchar_t should always be 4 bytes in this case, so we better not use if for
assuming the size here.
Instead of relying on __STDC_ISO_10646__ add HAVE_WCHAR_H and SIZEOF_WCHAR_T macros.
With HAVE_WCHAR_H defined we assume wchar_t exists and wchar.h exists. With SIZEOF_WCHAR_T we
guard the parts where the size of wchar_t is assumed to be 4 (currently all of them).
Note that this doesn't make the collate tests pass under cygwin, they fail before and after this patch for me.
See !755 for related discussions.
The correct spelling is "_NL_ABALTMON_n" rather than "_NL_ALTMON_n".
The typo made Meson build think that _NL_ABALTMON_n constants are
not supported which was totally wrong. This made g_date_time_format()
output incorrect abbreviated month names in some languages.
The old configure.ac script was correct here.
Bug introduced in commit be4f96b650.
Closes: #1759
Currently, there is no way to prevent tests from building using meson.
When cross-compiling, building the tests isn't necessary.
Instead, only build the tests on the following conditions:
1) If not cross-compiling.
2) If cross-compiling, and there is an exe wrapper.
Instead of requiring the user to specify which option to use, which
they will not really know, nor should they need to know.
Search for each type of iconv (in the C library, as a separate
native library, as the GNU implementation) by default.
Fixes https://gitlab.gnome.org/GNOME/glib/issues/1557
Add a missing ifdef from gfileutils.c that is needed for O_BINARY.
The other option was to remove O_BINARY, but i left it there for
the sake of completeness, as this is what g_file_get_contents() uses.
Instead of hardcoding /proc/self/cmdline use for __linux__ only,
do a configure-time test for it.
Specifically, this enables /proc/self/cmdline use on Cygwin.
The configure-time test is very primitive (just tests that the
file exists and that it's possible to read more than one byte from it),
relying on the testsuite for more extensive checks.
The test in the testsuite is modified to always run, even on platforms
where it isn't supposed to pass. If it fails there, the testing framework
skips it. If the test unexpectedly passes, that is reported too.
Check for RTLD_NEXT being present, and disable the gsocketclient-slow
test if it's absent, since the shlib dependency of that test requires
RTLD_NEXT to function.
This allows the testsuite to be built on Cygwin, which behaves
exactly like UNIX, but doesn't have RTLD_NEXT.
This macro was lost during meson migration. Set it again.
Also explain that Cygwin maintainers applied patches[0] to glib that
simply marked all G_PLATFORM_WIN32-protected code as !defined(G_WITH_CYGWIN),
i.e. they did not want that code to compile.
Instead of altering ifdef guards all over the place, we'll just
not define G_PLATFORM_WIN32 for Cygwin anymore.
[0]: 3a873fdd1b/2.36.3-not-win32.patch
In cross-compilation environments the runtime check isn't possible so it is up
to the builder to seed the cross file, but we can definitely state that strlcpy
doesn't exist with a build test.
Those lists were getting very long. We can’t quite entirely automate the
list generation since Meson doesn’t have a range() function, but we can
at least combine three of them into one.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It's necessary sometimes for installed tests to be able to run with a
custom environment. For example, the gsocketclient-slow test requires an
LD_PRELOADed library to provide a slow connect() (this is to be added in
a followup commit).
Introduce a variable `@env@` into the installed test template, which we
can override as necessary when generating `.test` files, to run tests
prefixed with `/usr/bin/env <LIST OF VARIABLES>`.
As the only test that requires this currently lives in `gio/tests/`, we
are only hooking this up for that directory right now. If other tests in
future require this treatment, then the support can be extended at that
point.
A lot of code cast function pointer to incorrect types. There is no
other way but silencing the warning. Follows an example of such cast:
glib/glist.c: In function ‘g_list_free_full’:
glib/glist.c:223:25: error: cast between incompatible function types from ‘GDestroyNotify’ {aka ‘void (*)(void *)’} to ‘void (*)(void *, void *)’ [-Werror=cast-function-type]
g_list_foreach (list, (GFunc) free_func, NULL);
^
It is not always needed to generate and install gmo files, for example
when building for Android or Windows that often doesn't have libintl to
use them anyway.
At least all GStreamer modules have this same option.
This is enough for most Debian buildds, including embedded devices
like mips and powerpcspe. It is not enough for hppa (PA-RISC), but that
architecture is so uniquely slow that it might make more sense to
special-case it downstream.
Signed-off-by: Simon McVittie <smcv@collabora.com>
armv5 Linux systems implement __sync_bool_compare_and_swap() and
friends by calling a function provided by the kernel. This is not
technically an atomic intrinsic, so gcc doesn't define
__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4 in this case, but it's good
enough for us. Extend the current Android special case to cover
GNU/Linux too.
The possibilities are:
* __sync_foo detected and __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4 predefined:
calls to __atomic_foo or __sync_foo primitives are inlined into user
code by gatomic.h
* __sync_foo detected but __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4 not
predefined: user code has an extern reference to g_atomic_foo(),
which calls __atomic_foo or __sync_foo because we defined
__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4 when compiling GLib itself
* Windows: user code has an extern reference to g_atomic_foo(),
which calls InterlockedFoo()
* !defined(G_ATOMIC_LOCK_FREE): user code has an extern reference to
g_atomic_foo(), which emulates atomic operations with a mutex
Signed-off-by: Simon McVittie <smcv@collabora.com>
Closes: #1576
FreeBSD 12 adds a new header, sys/auxv.h, to declare a function, elf_aux_info,
for public use, which was considered an internal function in previous releases.
This new function provides similar functionality with glibc getauxval, which is
also declared in the same header, but their interfaces are not compatible. Since
the only usage of sys/auxv.h is in g_check_setuid and FreeBSD already has
issetugid to provide the required functionality, we fixes the compilation error
by adding a check for getauxval function to prevent g_check_setuid from calling
getauxval when sys/auxv.h is found but getauxval is not available.
https://reviews.freebsd.org/D12743https://reviews.freebsd.org/rS324815
Partial revert of commit a7a6449f4d.
Checking for the availability of m4 for installing m4 macro files
creates an implicit dependency on m4 even if GLib does not need it; this
prevents building GLib and then installing Autotools in order to build a
project that depends on GLib.
Closes#1520
We already set -Wformat=2, which implies -Wformat-security, so there’s
no need to test for and set -Wformat-security separately.
The test for -Wformat-security never worked anyway, since gcc complains
if it’s specified without also setting -Wformat to some value. The
complaint causes configure.ac/meson.build to assume the option doesn’t
work.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/656
I can’t see this being used anywhere in GLib, or in my /usr/include
directory. I’m also not sure how configure.ac ends up defining it — it’s
certainly as a side-effect of something, and not deliberate.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1313
Previously we weren’t checking for it in meson.build (but were checking
for it in configure.ac, courtesy of glib-gettext.m4). Roughly emulate
the checks from glib-gettext.m4, checking for bind_textdomain_codeset()
in whichever libintl implementation we found ngettext() in.
meson.build still doesn’t implement the full set and order of checks in
glib-gettext.m4; there’s still a FIXME about that in meson.build.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1313
Previously it was hard-coded to true, rather than being based on the
calculations actually made by meson.build.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1313
This is equivalent to the AC_FUNC_PRINTF_UNIX98 macro which we use in
configure.ac. There may still be some obscure Unix platforms which don’t
natively support positional parameters, 20 years on.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1313
This is what Autotools does, and it's what all consumers of the
GModule API expect. Without this change, people on macOS upgrading to
a GLib built with Meson will find that their plugins no longer load.
Projects that use Meson and the `g_module_build_path()` API such as
glib-networking should pass `name_suffix:` to `shared_module()` to
ensure that plugins continue to be called libfoo.so on macOS.
New GModule API will eventually be added to address this.
See also:
https://gitlab.gnome.org/GNOME/glib/issues/1413a3d81719fe/meson.build (L108)
The goal of this commit is to reduce differences between the autotools and meson build.
With autotools AC_FUNC_ALLOCA was used which defines HAVE_ALLOCA_H, HAVE_ALLOCA,
C_ALLOCA. meson tried to replicate that with has_function() but alloca can be a macro
and and is named _alloca under Windows. Since we require a working alloca anyway
and only need to know if the header exists replace AC_FUNC_ALLOCA with a simple
AC_CHECK_HEADERS.
There is still one user of HAVE_ALLOCA in the embedded gnulib, but since alloca is
always provided through galloca.h just force define HAVE_ALLOCA there and add a comment.
The docs were mentioning alloca as an example for cross compiling. Since that variable no
longer exists now replace it with another one.
Check for compile warnings when assigning an int64_t* to a long*,
make gint64 a long long if they occur and assigning an int64_t* to
a long long* doesn't.
Modified by Philip Withnall <withnall@endlessm.com> to support Meson as
well as autotools.
https://gitlab.gnome.org/GNOME/glib/issues/972
The autotools build set it by default and we use off_t in various places,
even on Windows. Also set it with the meson build to avoid any regressions.
Ideally we shouldn't use off_t and use 64bit capable API on Windows instead, so
we get large file support with MSVC as well.
See https://mail.gnome.org/archives/desktop-devel-list/2018-July/msg00004.html
for a discussion on if/when we can start relying on Python 3 only.
Use Python 3.4 as a new requirement because that's the version used in
SLES 12 and Debian 8 and there is no good reason to require something newer
right now.
The new python module, added with 0.46, works with Python 2 and 3 and
allows to pass a path for the interpreter to use, if the need arises.
Previously the meson build set PYTHON, used in the shebang line of
the scripts installed by glib, to the full path of the interpreter.
The new meson module doesn't expose that atm, but we should set it to
a executable name anyway, and not a full path.
When compiling third-party projects with -Wbad-function-cast, the inline
g_atomic_pointer_get() implementation which uses C11 __atomic_load*()
calls on GCC was causing compilation errors like:
error: cast from function call of type ‘long unsigned int’ to non-matching type ‘void *’
While we don’t want to compile all of GLib with -Wbad-function-cast, we
should support its headers being included in projects which do enable
that warning.
It doesn’t seem to be possible to cast away the warning (e.g. by casting
the function’s result through (void)), so we have to assign to an
intermediate integer of the right size first.
The same has to be done for the bool return value from
__sync_bool_compare_and_swap(). In that case, casting from bool to
gboolean raises a -Wbad-function-cast warning, since gboolean is
secretly int.
The atomic tests have been modified to enable -Wbad-function-cast to
catch regressions of this in future. The GLib build has conversely been
modified to set -Wno-bad-function-cast, just in case people have it set
in their environment CFLAGS.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1041
This requires meson >= 0.47.0 otherwise building the doc fails:
https://github.com/mesonbuild/meson/issues/3379
While at it, no need to to pass --prefix --libdir to meson, other CIs
don't have them.
When the amount of free memory on the system is somewhat low, gnome-shell
will sometimes fail to launch apps, reporting the error:
fork(): Cannot allocate memory
fork() is failing here because while cloning the process virtual address
space, Linux worries that the thread being forked may end up COWing the
entire address space of the parent process (gnome-shell, which is
memory-hungry), and there is not enough free memory to permit that to
happen.
In this case we are simply calling fork() in order to quickly call exec(),
which will throw away the entirity of the duplicated VM, so we should
look for ways to avoid the overcommit check.
The well known solution to this is to use clone(CLONE_VM) or vfork(), which
completely avoids creating a new memory address space for the child.
However, that comes with a bunch of caveats and complications:
https://gist.github.com/nicowilliams/a8a07b0fc75df05f684c23c18d7db234https://ewontfix.com/7/
In 2016, glibc's posix_spawn() was rewritten to use this approach
while also resolving the concerns.
https://sourceware.org/git/gitweb.cgi?p=glibc.git;h=9ff72da471a509a8c19791efe469f47fa6977410
I experimented with a similar approach in glib, but it was not practical
because glibc has several items of important internal knowledge (such as
knowing which signals should be given special treatment because they are
NPTL implementation details) that are not cleanly exposed elsewhere.
Instead, this patch adapts the gspawn code to use posix_spawn() where
possible, which will reap the benefits of that implementation.
The posix_spawn API is more limited than the gspawn API though,
partly due to natural limitations of using CLONE_VM, so the posix_spawn
path is added as a separate codepath which is only executed when the
conditions are right. Callers such as gnome-shell will have to be modified
to meet these conditions, such as not having a child_setup function.
In addition to allowing for the gnome-shell "Cannot allocate memory"
failure to be avoided, this should result in a general speedup in this
area, because fork()'s behaviour of cloning the entire VM space
has a cost which is now avoided. posix_spawn() has also recently
been optimized on OpenSolaris as the most performant way to spawn
a child process.
We don’t strictly require this, but given that our CI runs it, we
essentially never test with 0.46.0, so it might as well be broken.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
We have not updated nor used this script for a long time, and nowadays
Meson makes it much easier to build on Windows for either Visual Studio
or MinGW, even straight from a GIT checkout, so it's about time that we
drop the glib-zip script from the source tree.
Autoconf macro AC_HEADER_MAJOR doesn't define a macro in config.h when
major is defined in sys/types.h. This was not a problem because major
is assumed to be always available. However, commit aefffa3fbc
changes this assumption in order to fix build on systems without major,
which causes code using major to be disabled on systems putting major
in sys/types.h.
This commit defines a new macro MAJOR_IN_TYPES for both autotools and
meson builds to make major useful on these systems again.
cc.has_header checks whether a header exists without knowing whether it
can be used. This is a problem on FreeBSD because its malloc.h is a
header with an '#error' line which always throw compilation error. To
avoid false positive in the check result, we use cc.compiles to do a
full compilation test instead of cc.has_header which only does check
with preprocessor.
We have no way to test Solaris builds atm, and it is not even clear how
to detect Solaris systems with meson. It will probably need to be
revisited when we get a proper CI in place.
See commit 4c2928a544 for why checking AT_SECURE is preferable compared
to UID checks as currently done in the fallback case.
getauxval() was added with glibc 2.16
While glibc <2.19 didn't provide a way to differentiate a 0 return value from an error,
passing AT_SECURE should always succeed according to
https://sourceware.org/ml/libc-alpha/2014-07/msg00407.html
I've added an errno check anyway, to be on the safe side.
Try and ensure that people don’t push code with misleading indentation
in future. This should give fairly few false positives.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
gcc defaults to utf-8 for both (see -fexec-charset and -finput-charset in the
gcc man page) so we should use it with msvc as well.
msvc by default uses the locale encoding unless there is a BOM, see
https://msdn.microsoft.com/en-us/library/mt708821.aspx
Our minimum requirement is already greater than that, so we don't need
to add checks there. We can always add -Wl,-framework,CoreFoundation
flag.
Fixes#1380.
- Compiler checks were failing because it were using C compiler to build
objc code.
- xdgmime is needed on osx too.
- -DGIO_COMPILATION must be passed to objc compiler too.
- gapplication doesn't build on osx, it is excluded in autotools too.
We have to be careful when we use add_project_link_arguments(): All
targets are built using link arguments for the C language, except for
libgio on osx which use the objc language, because it contains some ".m"
source files. See https://github.com/mesonbuild/meson/issues/3585.
https://bugzilla.gnome.org/show_bug.cgi?id=796214
Some compilers, particularly Android on armv5 and old versions of Clang
provide atomic ops, but don't define __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4
so we need to define it ourselves.
This matches what configure does, with the exception that now it's only
done for Android since clang defines __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4
now.
https://bugzilla.gnome.org/show_bug.cgi?id=796325
The latest patches have fixed the atomic check, which
uses __sync_bool_compare_and_swap , and thus fails on
MSVC.
As a result, in gatomic.c, we ended up trying to include
pthread.h, which failed.
This mimics the old behaviour a bit more closely, where
G_ATOMIC_LOCK_FREE was always defined in the win32
glibconfig.h
https://bugzilla.gnome.org/show_bug.cgi?id=796220
The 'no-builtin' checks were just plain wrong. For accurate detection of
functions, use has_function with a header in the prefix. This fixes
posix_memalign detection on Android and on MinGW32, MSYS-MinGW-w64, and
old versions of MSYS2-MinGW-w64.
Using the header in the `prefix:` is generally a good idea because of
how macOS does targetting of specific macOS releases at compile time.
This also allows cross-files to override the result by setting
`has_function_stpcpy = false`, etc in [extra properties]
https://bugzilla.gnome.org/show_bug.cgi?id=795876
The comment stated that the test isn't good enough, but it correctly
detects a C99 printf when I build with -D__USE_MINGW_ANSI_STDIO=1
and an incompatible printf without it.
Using mingw-w64 from current MSYS2.
https://bugzilla.gnome.org/show_bug.cgi?id=795569
This could have caused spurious test failures when running with -Werror,
due to the missing return statement in int main().
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Commit 3e96523e6b did not entirely fix the test, as the compiled test
code did not have a main() function, so failed to link with:
/usr/lib/gcc/x86_64-redhat-linux/7/../../../../lib64/crt1.o: In function `_start':
(.text+0x20): undefined reference to `main'
collect2: error: ld returned 1 exit status
This caused an invalid mixtures of builtin and non-builtin atomics/locks
to be used, which caused deadlocks in a number of tests.
Fix the atomic ops test in meson.build, and the unit tests all start
working again.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=796164
This allows building with posix threads on Windows. It is generally
better to use win32 threads implementation on Windows, but this option
can be used in case it causes issues, or for performance comparison for
example.
https://bugzilla.gnome.org/show_bug.cgi?id=784995
win32_cflags gets used globally as cflags and exposed in the .pc file.
win32_ldflags gets passed to glib-2.0 and exposed in the .pc file.
This should match what the autotools build is currently doing with
GLIB_EXTRA_CFLAGS and G_LIBS_EXTRA.
https://bugzilla.gnome.org/show_bug.cgi?id=784995
-z nodelete breaks the libresourceplugin module usage in the resources.c
test, which expects to be able to unload it.
Make the Meson build match what the autotools build does: only pass
glib_link_flags to the headline libraries (glib-2.0, gio-2.0,
gobject-2.0, gthread-2.0, gmodule-2.0) and omit it from all other build
targets.
https://bugzilla.gnome.org/show_bug.cgi?id=788771
On Windows we use gnulib and elsewhere we use glibc or similar.
Also change G_GNUC_PRINTF to use gnu_printf instead of __format__ if
possible because __format__ evaluates to ms_printf under MinGW,
but we use gnulib there and not the system printf.
gnu_printf is only available with GCC>=4.4 and not with clang.
https://bugzilla.gnome.org/show_bug.cgi?id=795569
In https://bugzilla.gnome.org/show_bug.cgi?id=794555 the tests for
posix_memalign and stpcpy were extended to catch the case where
the compiler provides an incomplete builtin.
Under MSYS2 the example code still compiles and links while the real usage
of stpcpy fails to build. To prevent the MSYS2 gcc from using the builtin
versions pass -fno-builtin.
https://bugzilla.gnome.org/show_bug.cgi?id=793729
The winsock2-using test does work perfectly, however this is a new
thing that didn't exist in autotools-based builds of glib in the past.
Autotools builds used the generic case where values were just defined
to some agreed-upon numbers, and this is what all autotools-glib
binaries and binaries built against autotools-glib (since these
values go into public glibconfig.h header) use. At least one value,
G_POLLIN, is different, thus breaking ABI if some binaries are
built with autotools and the others are built with meson.
Force meson buildscript to use the same G_POLL* constant values
for Windows builds that autotools builds use.
https://bugzilla.gnome.org/show_bug.cgi?id=794687
When cross compiling and not exe wrapper has been defined cc.run() raise
an exception. Avoid this by taking the value from [properties] in the
cross file and provide sensible default if the variable is not defined.
https://bugzilla.gnome.org/show_bug.cgi?id=794898
Add a test for monitoring an existing local file, with the
WATCH_HARD_LINKS flag specified. This would previously cause a crash;
now it doesn’t.
This test contains a FIXME where I suspect we should be getting some
additional file change notifications from changes made through the hard
link; this requires further follow up and probably further fixes to our
inotify backend.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755721
Accurate G_HAVE_GNUC_VISIBILITY is needed to correctly
define G_GNUC_INTERNAL later on. Autotools did that,
meson currently doesn't and opts to just set
G_HAVE_GNUC_VISIBILITY to 1 for all compilers except MSVC.
This leads to MinGW GCC having G_HAVE_GNUC_VISIBILITY=1,
which results in G_GNUC_INTERNAL being defined to
__attribute__((visibility("hidden"))), which is not supported.
Because cc.compiles() does not support override_options or
anything like that, we just feed it '-Werror' as-is, since
MSVC is known as not supporting visibility attributes anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=794636
GCC has built-ins for these functions, which might give a compile-only
test an impression that the functions are actually present in the C runtime.
Use a linked test to be sure.
Specifically, both functions are missing on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=794555
Supports %OB (alternative, standalone, nominative) month name along
with the old %B (primary, in a complete date format context, genitive)
month name. Similarly %Ob and %Oh for abbreviated month names.
Depending on the underlying operating system uses nl_langinfo()
or provides our custom implementation.
(Tweaked by Philip Withnall <withnall@endlessm.com> to add test case
comment and bug reference.)
https://bugzilla.gnome.org/show_bug.cgi?id=749206
Since commit 96ebcee8c4, we don’t actually need libmount 2.28. Lower our
dependency to 2.23 so that we can continue to build against CentOS 7.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: Emmanuele Bassi <ebassi@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=793288
Building against libmount installed into a non-default prefix wasn’t
working, as we were using #include <libmount/libmount.h> rather than
the correct #include <libmount.h> — all the mount.pc pkg-config files
set `Cflags: -I${includedir}/libmount`.
Fixing this while retaining the fallback support for versions of
libmount without a pkg-config file would have been tricky (we would need
to work out a suitable -I flag to set in LIBMOUNT_CFLAGS) to still be
able to use the correct #include path). Thankfully, libmount gained
pkg-config support a long time ago, so I think we can safely drop the
fallback code. In particular, Debian Jessie, Ubuntu Trusty, and CentOS 5
all ship a mount.pc file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793288
GLib makes various assumptions about aliasing throughout its codebase,
and compiling with -fstrict-aliasing has been demonstrated to cause
problems (for example, bug #791622). Explicitly disable strict aliasing
as a result.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As 'auto' dependency checking has been declared undesirable,
skip checking of optional dependencies where the option
defaults to true, but where the option doesn't make sense for
the operating system we're building for. Example: selinux only
makes sense on Linux, people compiling on Windows or macOS
shouldn't have to specify -Dselinux=false to get glib to build.
https://bugzilla.gnome.org/show_bug.cgi?id=792129
Properly define GLIB/GOBJECT_STATIC_COMPILATION when static build is enabled.
Use library() instead of shared_library() to allow selecting static builds.
https://bugzilla.gnome.org/show_bug.cgi?id=784995
The m4 and bash completion items are usable and relevant
depending on the host system's configuration. So, we check for the
presence of the programs that these items depend on, and only install
them when those programs are found.
For the Valgrind suppression files, we don't install them on Windows as
Valgrind is currently not supported on Windows.
Als fix the path where the GDB helpers are installed, as the path is
incorrectly constructed.
This will fix the "install" stage when building on Visual Studio at
least as there are some post-install steps that are related to them,
which will make use of these programs.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
We want to set _WIN32_WINNT so that functions will be properly found in
the headers, to target the NT6.1+ (Windows 7+) APIs.
Also improve the checks for if_nametoindex() and if_indextoname() on
Windows as they are supported in Windows Vista+, but they have
to be checked by linking against iphlpapi.lib (or -liphlpapi). On other
platforms, they are still checked as they were before.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
Instead of hardcoding -DPCRE_STATIC into the CFLAGS of GLib, do the
following on Windows only (since PCRE_STATIC only matters on Windows):
-If there is no installed PCRE, use the included PCRE copy and
enable -DPCRE_STATIC, as we did before.
-If there is a installed PCRE, check whether the PCRE build is a static
or DLL build by checking the linkage against pcre_free() with
PCRE_STATIC defined works. If it does, enable -DPCRE_STATIC.
-On non-Windows builds, do not enable -DPCRE_STATIC
https://bugzilla.gnome.org/show_bug.cgi?id=783270
The HAVE_GOOD_PRINTF config variable determines whether we are able to
use the CRT-supplied *printf() functions directly, by determining whether
the CRT-supplied vsnprintf() and snprintf() functions support C99 well
enough.
This means, we need to build the gnulib subdir as a static lib in GLib, and use
the gnulib *printf() functions when:
-We are on Windows
-The CRT's vsnprintf() and snprintf() is not sufficiently C99-compliant.
This will fix the problem when the *printf() functions cause a CRT
abort() call on pre-2015 Visual Studio builds at least, and ensures that
the Visual Studio 2015+ builds will pass the printf tests in GLib, since
the *printf() in Visual Studio 2015/2017's CRT does not support the %n
format specifier, nor the positional parameters (which requires
different _*printf_p*() functions), as indicated by
glib/tests/test-printf.c.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
Copy the msvc_recommended_pragmas.h helper header when we build for
Windows, so that people developing/using GLib on Windows can make use
of them in Visual Studio, so that unwanted compiler noise can be
filtered out and code with potentially-problematic warnings can be
attended to.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
Some of the dependencies' build systems for Visual Studio do not provide a
pkg-config file upon build, so we use find_library() for them when the
corresponding pkg-config files are not found during Visual Studio builds,
so that one will not need to make up pkg-config files for them, which
could be error-prone. These .lib names match the names that are built
with the officially supported build system that is used by their
respective Visual Studio support.
For ZLib, this will make gio-2.0.pc reflect on the zlib .lib based on
what is found, or whether we use the fallback/bundled ZLib, when we
don't have a pkg-config file for ZLib on MSVC. We still need to depend
on Meson to be updated to put the correct link argument for linking ZLib
in the pkg-config case.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
Without this, GNU-specific symbols won't be defined and the compiler
check will pass because GCC will assume that you know what you're
doing since it doesn't know what the symbol prototype is and compiler
checks aren't built with -Wall -Werror.
This will then cause a build failure because the wrong prototype will
be used.
We use it pretty much everywhere in order to get feature detection, and
that's also what the AC_USE_SYSTEM_EXTENSIONS m4 macro defines in the
Autotools build.
https://bugzilla.gnome.org/show_bug.cgi?id=785955
The Meson build has fallen a bit behind the Autotools one, when it comes
to the internally built tools like glib-mkenums and glib-genmarshals.
We don't need to generate gmarshal.strings any more, and since the
glib-genmarshal tool is now written in Python it can also be used when
cross-compiling, and without indirection, just like we use glib-mkenums.
We can also coalesce various rules into a simple array iteration, with
minimal changes to glib-mkenums, thus making the build a bit more
resilient and without unnecessary duplication.
On Visual Studio, the compilation of the check program for va_copy() and
__va_copy() succeeds even though they may not be really available. So,
make sure we include msvc_recommended_pragmas.h which helps us to detect
this situation by bailing out when warning C4013 (which means this
function is really not available) is encountered.
Also make sure that on Visual Studio builds we always include
msvc_recommended_pragmas.h is included so that it helps us to find out
problems in the build, and update comments for dirent.h and sys/time.h
as they are not shipped with any Visual Studio.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
This reduces the build-time dependencies of glib to only Python 3,
Meson, and git. Git is also optional if you provide a tarball in
which the subproject directories already exist.
The Python port was done by Jussi Pakkanen on bugzilla:
https://bugzilla.gnome.org/show_bug.cgi?id=779332
This version contains some fixes from that and also changes all
instances of `@` to `\u0040` because Meson does not yet provide a
configure_file() mode that ignores unknown @MACRO@ values.
This is a stub-only library that can be used while building against
MSVC and contains no i18n machinery at all.
The dependencies added indirectly use the libintl.h header, and when
built as a subproject, the header won't be in a path known the
pre-processor.
When no 'name:' kwarg is specified for cc.run, no output is printed.
This makes it difficult to figure out what is causing a pause in the
configure process.
By default, only build man pages and gtk-doc if the build-deps were
found. To force-enable, pass -Dwith-docs=yes and -Dwith-man=yes.
Also use a foreach loop for man pages instead of listing them all
manually
Don't use it project-wide for building everything. Otherwise
symbols for shared modules won't be exposed, e.g. in the
resourceplugin used by the gio resource unit test.
Disable gio tests on Windows, fix .gitignore to not ignore
config.h.meson, and add more things to it.
Rename the library file naming and versioning to match what Autotools
outputs, e.g., libglib-2.0.so.0.5000.2 on Linux, libglib-2.0-0.dll and
glib-2.0-0.dll on Windows with MSVC.
Several more tiny fixes, more executables built and installed, install
pkg-config and m4 files, fix building of gobject tests.
Changes to gdbus-codegen to support out-of-tree builds without
environment variables set (which you can't in Meson). We now add the
build directory to the Python module search path.
