bindfs is part of the setup process, so if it fails (as can happen if
the `fuse` kernel module has not been loaded — not much we can do about
that) then skip the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Add a note to the documentation of
`g_dbus_connection_signal_unsubscribe()`, `g_bus_unwatch_name()` and
`g_bus_unown_name()` warning about the need to continue iterating the
caller’s thread-default `GMainContext` until the
unsubscribe/unwatch/unown operation is complete.
See the previous few commits and #1515 for an idea of the insidious bugs
that can be caused by not iterating the `GMainContext` until
everything’s synchronised.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When testing that signals are delivered to the correct thread, and are
delivered the correct number of times, call `EmitSignal()` on the
`gdbus-testserver` to trigger a signal emission, and listen for that.
Previously, the code listened for `NameOwnerChanged` and connected to
the bus again to trigger emission of that. The problem with that is that
other things happening on the bus (for example, an old
`gdbus-testserver` instance disconnecting) can cause `NameOwnerChanged`
signal emissions. Sometimes, the `gdbus-threading` test was failing the
`signal_count == 1` assertion due to receiving more than one
`NameOwnerChanged` emission.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This is equivalent, but makes the loop exit conditions a little clearer,
since they’re actually in a `while` statement, rather than being a
`g_main_loop_quit()` call in a callback somewhere else in the file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
As with the previous commit, don’t stop iterating the `context` in
`test_delivery_in_thread_func()` until the unsubscription from a signal
is complete, and hence there’s a guarantee that no callbacks are pending
in the `thread_context`.
This commit uses the `GDestroyNotify` for
`g_dbus_connection_signal_subscribe()` as a synchronisation message from
the D-Bus worker thread to the `test_delivery_in_thread_func()` thread
to notify of signal unsubscription.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Previously, the code in `ensure_gdbus_testserver_up()` created a proxy
object and watched its `name-owner` to see when the
`com.example.TestService` name appeared.
This ended up subscribing to three signals (one of them for name
ownership, and two unused for properties of the proxy), and was racy. In
particular, the `name-owner` property could be set before all D-Bus
messages had been processed — it could have been derived from getting
the owner of the name, for example.
This left unprocessed messages hanging around in the `context`, but that
context was never iterated again, which essentially leaked the
references held by those messages. That included a reference to the
`GDBusConnection`.
The first part of the fix is to simplify the code to use
`g_bus_watch_name_on_connection()`, so there’s only one signal
subscription to worry about.
The second part of the fix is to use the `GDestroyNotify` callback for
the watch data to be notified of when all D-Bus traffic has been
processed and the signal unsubscription is complete. At this point, it’s
guaranteed that there are no idle callbacks pending in the
`GMainContext`, since the `GDestroyNotify` callback is the last one
invoked on the `GMainContext`.
Essentially, this commit uses the `GDestroyNotify` callback as a
synchronisation message between the D-Bus worker thread and the thread
calling `ensure_gdbus_testserver_up()`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Iterate the given `context` while waiting, rather than sleeping. This
ensures that if the errant `GDBusConnection` ref is held by some pending
callback in the given `context`, it will actually be released.
Typically `context` is going to be the global default main context.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This introduces no functional changes, but makes the code a little more
explicit about which connection and main context it’s operating on.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
`CallDestroyNotifyData` never uses that `GMainContext`, and holding a
ref to it could cause reference count cycles if the `GMainContext` is no
longer being iterated.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
The fix for bgo#651133 (commit 7e0f890e38) introduced a kind of weak
ref, which had to be thread-safe due to the fact that `GDBusProxy`
operates in one thread but can emit signals in another.
Since that commit, `GWeakRef` was added, which does the same thing. Drop
the custom code in favour of it; this should be functionally equivalent,
but using an RW lock rather than a basic mutex, which should reduce
contention.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
These checks used to be a precondition on test_threaded_singleton(); but
the earlier tests could leave the refcount of the shared connection in a
bad state, and this wouldn’t be caught until later.
Factor out the check, increase the iteration count to 1000 (so the check
blocks for up to 1s rather than 100ms), and call it in more places.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
mtab_file_changed_id is not currently removed when finalizing, which
could potentially lead to segfaults. Let's remove the source when
finalizing to avoid this.
mtab_file_changed_id might be set on thread default context, but it is
always cleared on the global context because of usage of g_idle_add. This
can cause the emission of redundant "mounts-change" signals. This should
not cause any issues to the client application, but let's attach the idle
source to the thread-default context instead to avoid those races for sure.
The `get_mounts_timestamp()` function uses `mount_poller_time` when
`proc_mounts_watch_source` is set, but the `mount_poller_time` is not
initialized in the same time as `proc_mounts_watch_source`. This may
cause that zero, or some outdated value is returned. Let's initialize
`mount_poller_time` to prevent invalid values to be returned.
The Nautilus test suite often crashes with "GLib-FATAL-CRITICAL:
g_source_is_destroyed: assertion 'g_atomic_int_get (&source->ref_count)
> 0' failed" if it is started with "GIO_USE_VOLUME_MONITOR=unix". This
is because GUnixMountMonitor is simultaneously used from multiple
threads over GLocalFile and GVolumeMonitor APIs. Let's add guards for
proc_mounts_watch_source and mount_poller_time variables to prevent
those crashes.
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2030
There was a slight race in name ownership: a gap between calling
`RequestName` (or receiving its reply) and subscribing to `NameLost`. In
that gap, another process could request and receive the name, and this
one wouldn’t know about it.
Fix that by subscribing to `NameAcquired` and `NameLost` before calling
`RequestName`, and then unsubscribing again if the subscriptions turn
out not to be necessary (if the process can’t own the requested name).
Spotted and diagnosed by Miika Karanki.
One of the tests needs an additional iteration of the main loop in order
to free all the signal closures before it can complete its checks.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1517
This is a fairly large refactoring. The highlights are:
- Removing in-progress connections/addresses from GSocketClientAsyncConnectData:
This caused issues where multiple ConnectionAttempt's would step over eachother
and modify shared state causing bugs like accidentally bypassing a set proxy.
Fixes#1871Fixes#1989Fixes#1902
- Cancelling address enumeration on error/completion
- Queuing successful TCP connections and doing application layer work serially:
This is more in the spirit of Happy Eyeballs but it also greatly simplifies
the flow of connection handling so fewer tasks are happening in parallel
when they don't need to be.
The behavior also should more closely match that of g_socket_client_connect().
- Better track the state of address enumeration:
Previously we were over eager to treat enumeration finishing as an error.
Fixes#1872
See also #1982
- Add more detailed documentation and logging.
Closes#1995
There were some problems about where to install `gio-launch-desktop` to
support multiarch systems without circular dependencies. Simon McVittie
suggested that, actually, given the current set of platforms supported
by `GDesktopAppInfo` (they’re all POSIX), we could just use `sh`.
That simplifies things nicely. `gio-launch-desktop` can always be
resurrected (and the multiarch debate continued and resolved) if needed
in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1633
Some CI platforms invoke these tests with euid != 0 but with
capabilities. Detect whether we have Linux CAP_DAC_OVERRIDE or other
OSs' equivalents, and skip tests that rely on DAC permissions being
denied if we do have that privilege.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2027
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2028
There were a couple of custom paths which could end up being relative,
rather than absolute, due to not properly prefixing them with
`get_option('prefix')`.
The use of `join_paths()` here correctly drops all path components
before the final absolute path in the list of arguments. So if someone
configures GLib with an absolute path for `gio_module_dir`, that will be
used unprefixed; but if someone configures with a relative path, it will
be prefixed by `get_option('prefix)`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1919
The loops should continue iterating if the timeout is non-zero and we're
still waiting for the updated value. Otherwise, if things break, we'll
be waiting until we receive a value that never arrives.
"gio info" output doesn't contain any information about mount points, but
that information can be useful when debugging issues in facilities that
depend on knowing about mount points, such as the trash API.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Co-authored-by: Ondrej Holy <oholy@redhat.com>
Documentation says that g_file_peek_path() returns exactly the same
what g_file_get_path(), but this is not true. Apart from that the code
segfaults for some uris (e.g. for "trash:///"), it returns target-uri
for trash and recent schemes. This is unexpected and can lead to various
issues among others because the target-uri paths are not automatically
translated back to GDaemonFile as it is done with gvfsd-fuse paths.
g_file_get_path() returns NULL for trash and recent schemes, because
fuse paths are not provided for those schemes. So g_file_peek_path()
should return NULL as well. It is up to the concrete application to
use target-uri when appropriate.
This change was made as a part of commit 4808a957, however, neither
the commit message, neither the corresponding bug doesn't mention this
crucial change and doesn't give any clear reasoning. So let's revert
this.
The GMemoryMonitor interface uses G_DECLARE_INTERFACE, which provides a
typedef for the interface dummy type. We declare the same type inside
the global giotypes.h header, which leads to typedef redeclaration
warnings on toolchains that do not support—intentionally or not—the C11
feature of typedef redefinition.
While we do have a toolchain requirement for C11 typedef redefinitions
listed on our wiki, we also suspended it temporarily to allow users of
non-C11 compilers to work on newer versions of GLib; so, let's keep them
working a while longer.
Python tuple comparisons actually do what we want for comparing major
and minor versions, so tidy things up by using that.
This introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This reverts commit b6d8efbebc.
This GLib API is good, but the implentation is not ready, so there's no
reason to commit to the API in GLib 2.64. We can reland again when the
implementation is ready.
There are three problems: (a) The glib-networking implementation normally
works, but the test has been broken for a long time. I'm not comfortable
with adding a major new feature without a working test. This is
glib-networking#104. (b) The WebKit implementation never landed. There
is a working patch, but it hasn't been accepted upstream yet. This API
isn't needed in GLib until WebKit is ready to start using it.
https://bugs.webkit.org/show_bug.cgi?id=200805. (c) Similarly, even if
the WebKit API was ready, that itself isn't useful until an application
is ready to start using it, and the Epiphany level work never happened.
Let's try again for GLib 2.66. Reverting this commit now just means we
gain another six months before committing to the API forever. No reason
to keep this in GLib 2.64 when nothing is using it yet.
This avoids a crash when starting Evolution, and fixes the
network-monitor and network-monitor-race test cases on my developer
workstation. (I assume the CI is not crashing due to lack of network
access there.)
Problem is that if a network already exists in the networks table,
g_hash_table_add() "destroys" (unrefs) it before adding the new one
(which we failed to ref before adding). This means we just accidentally
lost a ref. In practice, the network gets unexpectedly destroyed here
before returning.
Fixes#2020
This complements the `--glib-min-required` argument, just like the
`GLIB_MIN_REQUIRED` and `GLIB_MAX_ALLOWED` preprocessor defines which
control access to APIs in C.
Currently, it doesn’t affect code generation at all. When we next change
code generation, we will need to gate any new API usage on this
argument.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1993
This makes it consistent with the `GLIB_MIN_REQUIRED` defines which are
used for API stability/versioning in C code.
It doesn’t otherwise change the behaviour of the `--glib-min-version`
argument.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1993
Rather than using an array, which requires a lot of iteration over it to
check whether a particular network is present. Using a hash table only
requires iteration in the can_reach() case, where we need to match a
mask in the networks array, rather than equal it.
This should improve performance for large numbers of routes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1925
