2002-08-06 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib/gmain.c: Factor out g_main_context_init_pipe from
g_main_context_new to initialize the wakeup pipe of a
context. Call that function from g_main_context_new if threads are
initialized and for all contexts when threads are initialized
in g_main_thread_init. (#86872)
* gthread/gthread-impl.c: Call g_main_thread_init. (#86872)
2002-08-06 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib/gthread.c: Set the normal PID surrogate priority according
to getpid() to avoid errors for niced processes. (#86116)
* gthread/gthread-impl.c, gthread/gthread-posix.c,
gthread/gthread-solaris.c: Do the same for the posix/dce
implementation. Solaris still needs to set priority of the main
thread, because all unbound threads will schedule according to
that value and it defaults to 0 (the minimal value).
2002-07-03 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread/gthread-solaris.c: Use thr_min_stack() instead of
sysconf (_SC_THREAD_STACK_MIN). if stack_size is 0 on entry to
g_thread_create_solaris_impl, also pass 0 to thr_create. Otherwise
the stack might be to small for any nontrivial thread. Discovered
on intel-solaris by Rajkumar Sivasamy <rajkumar.siva@wipro.com>.
2002-03-12 Alexander Larsson <alla@lysator.liu.se>
* glib/gconvert.c:
Cache getenv("G_BROKEN_FILENAMES") in have_broken_filenames() and
use instead. Add g_convert_init() that calls have_broken_filenames()
* gthread/gthread-impl.c:
Have g_thread_init call g_convert_init.
2002-03-10 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-posix.c (g_thread_create_posix_impl): Do a comparison,
not an assignment, stupid! Spotted by Daniel Elstner
<daniel.elstner@gmx.net>.
Sun Mar 3 21:09:24 2002 Owen Taylor <otaylor@redhat.com>
* configure.in: Default to --disable-gtk-doc, to avoid
Jade setup hassles.
* autogen.sh: Add --enable-gtk-doc.
* configure.in: Default to --disable-static to go
along with Pango, GTK+ where we need to do that for
bin-compat reasons.
* Makefile.am: Add a slightly modified distcheck rule
that passes --enable-gtk-doc to the configure inside.
(So that 'make dist' succeeds inside.)
* configure.in *.pc.in **/Makefile.am m4macros/glib-2.0.m4
tests/makefile.mingw.in: Switch everything over to
glib-2.0.
2002-02-09 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Make --disable-threads work again. (#71034)
* gthread-impl.c: Only compile most of this file, if
G_THREAD_ENABLED is set.
2002-01-05 Hans Breuer <hans@breuer.org>
* glibconfig.h.win32.in
msvc_recommended_pragmas.h (new file) : moved warning to
error pragmas to their own file to not force 'good practice'
programming in downstream libs and apps. Instead the new header
will be used by -FImsvc_recommended_pragmas.h in gnome/cvs
makefile.msc
* */makefile.msc.in : use -FImsvc_recommended_pragmas.h
2001-11-24 Tor Lillqvist <tml@iki.fi>
*/.cvsignore: Add various Win32 related file types.
gmodule:
2001-11-24 Tor Lillqvist <tml@iki.fi>
* Makefile.am: Remove rule for testgmodule.exp, too.
2001-11-22 Tor Lillqvist <tml@iki.fi>
* gmodule-win32.c: Current w32api headers do include tlhelp32.h,
so no need to have an extract from it here.
2001-10-26 Tor Lillqvist <tml@iki.fi>
* glib/glib.def: Update.
* tests/makefile.{mingw,msc}.in: Add ../* to PATH before running
tests to find DLLs. Separate the interactive tests, don't run them
in the check target.
* */makefile.msc.in: Include make.msc from GLib's build directory.
2001-10-23 Tor Lillqvist <tml@iki.fi>
* {glib,gmodule,gobject,gthread}/Makefile.am: (Win32): If we
have built the MSVC import library, install it. Install the
gcc import library. Also support uninstall.
2001-09-24 Bruno Haible <haible@clisp.cons.org>
* glib/gwin32.c (g_win32_getlocale): When the sublangid is
SUBLANG_DEFAULT, return the locale of the language's main country,
not a country-neutral locale. E.g. "en_US" instead of "en". Add
handling of LANG_SORBIAN. Fix typo for SUBLANG_CHINESE_SIMPLIFIED
(China == CN, CH == Switzerland). Ignore empty environment
variable values.
2001-09-28 Tor Lillqvist <tml@iki.fi>
* glib/makefile.{mingw,msc}.in: Add localcharset.o. Just copy the
source file from libcharset and compile in this directory.
* glib/giochannel.c: Mark rest of g_set_error strings for
translation, too.
* glib/giowin32.c: Add some debugging output functions, call them
when debugging.
(create_events, g_io_win32_msg_write): Free message fetched with
g_win32_error_message ().
(g_io_win32_check): Indentation fixes.
(g_io_win32_fd_read,g_io_win32_sock_read): Don't always return
G_IO_STATUS_NORMAL. Do return G_IO_STATUS_EOF if we got 0 bytes,
like on Unix. This helps making the test programs run
successfully.
* glib/gmain.c (g_poll): Return the code ifdeffed out with
TEST_WITHOUT_THIS. Can't remember why it was ifdeffed out. Things
seem to work as previously with the code in place. Especially
spawn-test didn't work with the code ifdeffed out (Bug#61067).
* glib/grand.c (g_rand_new): Don't try to use /dev/urandom unless
on Unix.
* glib/gspawn-win32-helper.c (WinMain): Remove Sleep(10000)
accidentally left in.
gthread:
2001-09-28 Tor Lillqvist <tml@iki.fi>
* gthread-win32.c: Use an extra level of indirection for GMutex.
It is now a pointer either to a pointer to a CRITICAL_SECTION
struct, or to a mutex HANDLE. This is needed in case the user
defines G_ERRORCHECK_MUTEXES. G_MUTEX_SIZE must correctly reflect
the size of *GMutex, but this used to vary depending on whether we
at run-time chose to use CRITICAL_SECTIONs or mutexes.
(g_mutex_free_win32_cs_impl, g_cond_free_win32_impl): Call
DeleteCriticalSection() when done with it.
* gthread-impl.c (g_thread_init_with_errorcheck_mutexes): Call
g_thread_impl_init() before accessing
g_thread_functions_for_glib_use_default, as the
g_thread_impl_init() function might modify it.
po:
2001-09-28 Tor Lillqvist <tml@iki.fi>
* POTFILES.in: Add iochannel.c and giowin32.c.
* sv.po: Remove a bogus fuzziness indicator.
2001-09-26 Tor Lillqvist <tml@iki.fi>
* configure.in: Retract my change earlier today. Don't preset
autoconf variables in a try to match both mingw and MSVC. Instead,
he who packages a prebuilt GLib developer distribution for Win32
runs configure twice: once for mingw, once for MSVC, and then uses
diff -D on the glibconfig.h files to generate a suitably ifdeffed
glibconfig.h for distribution that suits both compilers. (Ditto
for config.h, although that file wouldn't be distributed in a
developer package, but in a source package for Win32 users who
want to build GLib but can't use configure.)
* glibconfig.h.win32.in
* config.h.win32.in: Generated by using diff -D as described above.
* tests/makefile.mingw.in (.c.exe): Correct name of gthread (import)
library.
gthread:
2001-09-26 Tor Lillqvist <tml@iki.fi>
* makefile.mingw.in: Fix couple of typos.
* gthread.def: Add g_thread_init_with_errorcheck_mutexes.
2001-09-25 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-impl.c: Corrected the array size (cough, cough). Pointed
out by gpablo@intersystems.com.ar. Fixes#61065.
2001-09-25 Tor Lillqvist <tml@iki.fi>
* configure.in: More Win32 automake macros. For .def files:
GLIB_DEF, GMODULE_DEF, GOBJECT_DEF and GTHREAD_DEF. For .exp
files: TESTGMODULE_EXP (for programs that need to export symbols,
just testgmodule here). A new conditional, MS_LIB_AVAILABLE to
test whether the Microsoft librarian ("ar") is available to build
MS import libraries.
* glib/Makefile.am
* gmodule/Makefile.am: Use above. New rule to build MS import
library.
* glib/makefile.msc.in
* tests/makefile.msc.in
* tests/makefile.mingw.in: Use same DLL and import library names as
libtool.
gmodule:
2001-09-25 Tor Lillqvist <tml@iki.fi>
* makefile.mingw.in: Fix missing end @ in @LT_CURRENT@.
* makefile.msc.in: Use same DLL and import library names as
libtool.
gobject:
2001-09-25 Tor Lillqvist <tml@iki.fi>
* Makefile.am: Use new macros for .def file, and check for
MS_LIB_AVAILABLE, new rule to build MS import library.
* makefile.msc.in: Use same DLL and import library names as
libtool.
gthread:
2001-09-25 Tor Lillqvist <tml@iki.fi>
* Makefile.am: Use new macros for .def file, and check for
MS_LIB_AVAILABLE, new rule to build MS import library.
* makefile.msc.in: Use same DLL and import library names as
libtool.
2001-09-19 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib/gthread.h (GThreadFunctions): Add thread_equal function to
allow for platform defined function to compare two threads.
* glib/gthread.c: Use g_thread_functions_for_glib_use.thread_equal
when non-NULL instead of ==.
* gthread/gthread-posix.c: Add g_thread_equal_posix_impl and
add to the function vector g_thread_functions_for_glib_use_default.
* gthread/gthread-solaris.c, gthread/gthread-win32.c: Add NULL
as equal function, as on those two platforms you don't need an
equal function.
2001-09-17 Tor Lillqvist <tml@iki.fi>
* configure.in: Add variable for LT_CURRENT minus LT_AGE (the
suffix used by libtool on Win32 for DLLs). Set variables for the
compiled resource files on Windows. Handle the native Win32
gthread stuff.
* glib/Makefile.am
* gmodule/Makefile.am
* gobject/Makefile.am: (Win32) Add minor hacks to link in the object
file produced from the resource file. Use the lt-compile-resource
script from the build module. The non-hack way would be to teach
libtool, autoconf and automake about .rc files (which are a kind
of source code, after all, that gets compiled to object
files). But then there would be problems for those who wouldn't have
bleeding edge auto* and libtool.
* glib/glib.def
* gobject/gobject.def: Updates.
* glib/glib.rc.in
* gmodule/gmodule.rc.in
* gobject/gobject.rc.in
* gthread/gthread.rc.in: Update InternalName and OriginalFilename to
match libtool's naming convention for DLLs.
* glib/gutils.c: Ditto when constructing the DLL name in the
definition for GLIB_LOCALE_DIR.
* glib/makefile.mingw.in
* gmodule/makefile.mingw.in
* gobject/makefile.mingw.in
* gthread/makefile.mingw.in: Update import library names.
2001-09-04 Tor Lillqvist <tml@iki.fi>
* README.win32: Update. Don't mention pthreads.
* build-dll: Remove, moved to the build module.
* glibconfig.h.win32.in: Don't mention pthreds here, either.
* glib/gstrfuncs.c: Mark the correct variable for export from DLL.
* glib/giowin32.c (g_io_win32_msg_create_watch): Owen forgot to
rename the win32_watch_funcs variable here, too.
* */makefile.mingw.in: Don't use version number in import library
name. Use whole version number in DLL name. Use build-dll from the
build module.
2001-08-30 Tor Lillqvist <tml@iki.fi>
After being away for about five months, I'm back working on
this... For now, still using same build setup for Win32. Probably
will change to not including version numbers in the import library
names, though. (But the DLL names would still include them,
possibly even also the micro version number.) That would be more
Unix-like. Also, will have to check out newest mingw tool versions
to see if the build-dll script now can be retired.
* makefile.mingw
* makefile.msc: New files, no need to generate from .in as
they don't contain references to automake variables.
* makefile.mingw.in
* makefile.msc.in: Removed.
* glib.rc.in: Remove
* glib/glib.rc.in: Moved here.
* Makefile.am
* glib/Makefile.am: Corresponding changes.
* glib/glib.def: Fix typo, add new entries.
* glib/gspawn-win32-helper.c: More debugging. Doesn't work
currently (or then it never has on Win2k, which I now use?)
* glib/gstrfuncs.c
* glib/gstrfuncs.h: Mark g_ascii_table for export/import on Win32.
* */makefile.mingw.in: Reflect new location of glib library.
Tue Jun 26 11:43:46 2001 Owen Taylor <otaylor@redhat.com>
* configure.in Makefile.am *.[ch] glib/*.[ch] glib/Makefile.am:
Move glib library into a subdirectory, make all GLib include
files include as <glib/glist.h>
* tests/testglib.c tests/testgdate.c tests/testgdateparser.c
tests/timeloop.c tests/timeloop-basic.c: Move all tests into
the tests/ subdirectory.
2001-05-22 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-win32.c (g_cond_wait_internal): Also return TRUE for
late arrived signals. Thanks to Steven Brooks
<umbrook0@cs.umanitoba.ca> for pointing out.
2001-05-22 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* config.h.win32.in: Removed POSIX_*. Defined G_THREAD_SOURCE to
"gthread-win32.c".
* glibconfig.h.win32.in: Define G_HAVE_ISO_VARARGS for gcc, don't
know about MSC. Define G_THREADS_IMPL_WIN32 instead of
G_THREADS_IMPL_POSIX and define the right static mutex macros and
types.
* build/win32/make.mingw (CXX): Removed PTHREAD defs. Added
-O2 -Wall to compile flags.
* gthread/gthread-impl.c (g_thread_init): Move the thread
implementation initialization to before assigning
GThreadFuncs, which now is just struct assigned and not
memcpy'ed. Completed check for zero members of GThreadFuncs.
* gthread/makefile.mingw: Don't link to pthread anymore.
* gthread/gthread-win32.c: New file for native thread support for
win32. Thanks to Hans Breuer <hans@breuer.org> to got me
kickstarted.
* gthread/Makefile.am: Also distribute gthread-win32.c.
Fri May 4 04:14:45 2001 Tim Janik <timj@gtk.org>
* gthread-posix.c (g_cond_timed_wait_posix_impl): don't g_assert()
the user specified time, but g_return_val_if_fail() here.
2001-04-03 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-posix.c: Added special case for priorities on
FreeBSD. Thanks to David Reid <dreid@jetnet.co.uk> for the info.
* gthread-impl.c: Made two macros safe with ().
2001-03-10 Tor Lillqvist <tml@iki.fi>
* */Makefile.am: Use the _LIBADD dependencies on libglib only on
Win32.
* gobject/gobject.def: Add a couple of missing entries.
2001-02-21 Tor Lillqvist <tml@iki.fi>
* Makefile.am: Use libglib-1.3.la from top_builddir. Invoke
libtool with -no-undefined for Win32 and Cygwin.
* gthread-impl.c (g_thread_init): Win32 code snippet used also on
Cygwin.
2001-02-21 Tor Lillqvist <tml@iki.fi>
* gutils.c (g_path_is_absolute): Match also UNC paths on Win32.
* gthread.h: Include gtypes.h to be sure to get GLIB_VAR
definition, remove definition from here.
* gunicode.h: Remove duplicate GLIB_VAR definition from here, too.
* gutils.c: (Win32) Use USERPROFILE as home dir if present. On
Win2k, HOMEDRIVE and HOMEPATH aren't reliable.
* Makefile.am (INCLUDES): Add -DGLIB_COMPILATION.
* makefile.mingw.in: Remove install target, Windows isn't Unix.
* testgdate.c
* testgdateparser.c
* testglib.c: Undefine GLIB_COMPILATION.
* glib.def: Updates.
* .cvsignore
* */.cvsignore: Ignore also .obj, .dll, .lib and .exe files.
2001-02-15 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* acconfig.h, configure.in: Reverted the changes necessary to
enlarge the system thread for G_THREAD_USE_PID_SURROGATE.
* gthread.c: Now implement G_THREAD_USE_PID_SURROGATE in gthread.c
instead of gthread/gthread-posix.c. While the latter has the
advantage, that it is conceptually cleaner, it makes
g_thread_self_posix_impl _very_ slow and that hurts
GStaticRecMutex and other things. So the new version is less
clean, but faster.
* gthread-posix.c: Removed the G_THREAD_USE_PID_SURROGATE
implementation, which is now in gthread.c.
2001-01-30 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread/gthread-impl.c (g_thread_init_with_errorcheck_mutexes): Call
g_thread_impl_init(), as g_thread_init won't call it.
* glib/glib-sections.txt, glib/tmpl/threads.sgml: Added
g_static_mutex_free
* gthread.c, gthread.h: Added g_static_mutex_free to allow using
GStaticMutexes with limited lifetime without leaking.
* configure.in: GStaticMutex doesn't have to provide extra space
for debugging information for G_ERRORCHECK_MUTEXES, as then the
non-default implementation (runtime_mutex) is used anyway.
2001-01-30 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread.h (g_cond_wait): Added debug information for
g_mutex_free calls, if G_ERRORCHECK_MUTEXES is defined.
* gthread/gthread-impl.c (g_mutex_free_errorcheck_impl): Fixed it for
real. Sorry for this mess. It looked like a real obvious fix, so I
didn't check. Bad boy. Added some casts to quiet the compiler.
2001-01-29 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread.c: Broadcast the condition, if there are waiting
readers, as all might read at the same time. Only signal the
writer thread, if there are no more readers.
* gthread/gthread-impl.c (g_mutex_free_errorcheck_impl): Add
new check to errorcheck mutexes to abort, if a locked mutex is freed.
2001-01-25 Tor Lillqvist <tml@iki.fi>
* makefile.mingw.in
* */makefile.mingw.in: Protect the rule to rebuild makefile.mingw
if makefile.mingw.in has changed with a check if said .in file
exists. (This rule is mainly a convenience for yours truly.)
2001-01-03 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-solaris.c, gthread-posix.c: Made g_thread_min_stack_size
static.
2CVS: ----------------------------------------------------------------------
2000-11-28 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-impl.c: Revamped errorcheck mutexes and added errorcheck
cond_wait() and cond_timed_wait() funtions. This makes he whole
thing work. Now we only show the location of the locking/unlocking
for -DG_ERRORCHECK_MUTEXES and not the name of the mutex.
* gthread.c: Set the thread data before locking the mutex, because
the locking call might use g_thread_self ().
* gthread.h: Do only show the location of the locking/unlocking
for -DG_ERRORCHECK_MUTEXES and not the name of the mutex. Add the
errorcheck capability for g_cond_wait and g_cond_timed_wait as
well.
2000-11-21 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Add a surrogate for thread priorities using PID
niceness for systems with no thread priorities and different PIDs
for threads of the same process (most notably: Linux). Define
G_THREAD_USE_PID_SURROGATE in that case, as used by
gthread-posix.c. Also make the system thread bigger by
sizeof (long) to contain the thread's PID.
* gfileutils.c: Include stdlib.h for mkstemp prototype.
* gthread.c: Add priority range checks to the affected functions.
* gthreadpool.c: Remove unused variable.
* gthread-impl.c, gthread-posix.c, gthread-solaris.c: Removed
g_thread_map_priority function in favour of the
g_thread_priority_map array. Initialize the array with
PRIORITY_{...}_VALUE, if available and interpolate beetween the
bounds if .._NORMAL_.. and .._HIGH_.. are not available.
* gthread-posix.c: If we should use the PID niceness as a
surrogate for thread priorities (G_THREAD_USE_PID_SURROGATE is
defined), then disable normal priority handling and use PIDs and
setpriority() instead. Depends on the thread to write its PID into
the place after the thread id right after thread creation.
2000-11-15 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Check for the sched.h header and include it on
gthread/gthread-posix.c if available.
* gthread-posix.c: Include <sched.h> if available.
* configure.in: Add -D_POSIX4_DRAFT_SOURCE to
GTHREAD_COMPILE_IMPL_DEFINES. Also add -D_POSIX4A_DRAFT10_SOURCE
to G_THREAD_CFLAGS. Really deploy GTHREAD_COMPILE_IMPL_DEFINES,
when searching for thread libs. Look for sched_* functions in
-lrte as well. All of that is necessary on DG/UX.
* configure.in: Use AC_TRY_COMPILE instead of AC_EGREP_HEADERS in
various places to make it work more reliable, to make it accept
macros instead of functions etc.
* configure.in: Replace some NULL's for checks with 0 to make it
work without stdio.h everywhere.
* configure.in, gutils.c: changed the test for getpwuid_r to first
test for a posix version and then for a non-posix version. No code
change in gutils.c. Again this change deals better with getpwuid_r
being a macro and not a function. Most of the above with kind help
from Tethys <tet@isengard.europe.dg.com>. This fixes Bug #13403.
2000-10-25 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* Makefile.am : Add @GLIB_DEBUG_FLAGS@ to INCLUDES for accessing
-DG_ENABLE_DEBUG as needed in gthread-posix.c.
* gthread-posix.c: Revamped error handling for native thread
function calls. Now EPERM errors are ignored for some commands and
only a warning message is output once (at first occurrence).
gmodule:
* Makefile.am (BUILT_EXTRA_DIST): New variable.
(dist-hook): Handle $(BUILT_EXTRA_DIST).
gobject:
* Makefile.am (BUILT_EXTRA_DIST): New variable.
(dist-hook): Handle $(BUILT_EXTRA_DIST).
(*): Remove traces of @STRIP_{BEGIN,END}@.
gthread:
* Makefile.am (BUILT_EXTRA_DIST): New variable.
(dist-hook): Handle $(BUILT_EXTRA_DIST).
docs/reference:
'make distcheck' fixes.
* glib/Makefile.am (EXTRA_DIST): Add $(DOC_MODULE)-decl.txt.
(html): Run 'gtkdoc-fixxref' in $(srcdir).
(dist-check-gtkdoc): Add missing quote.
(dist-hook): Copy in dependency order, so that none of the
makerules are fired in a tarball build.
* gobject/Makefile.am: Likewise.
toplevel:
Remove need for acconfig.h, and misc. cleanups.
* acglib.m4 (GLIB_SIZEOF): Add 'autoheader' comment to
AC_DEFINE_UNQUOTED.
(GLIB_BYTE_CONTENTS): Likewise.
* configure.in: Add 'autoheader' comments to all AC_DEFINE(...)
and AC_DEFINE_UNQUOTED(...) lines.
Replace AC_MSG_CHECKING/AC_CACHE_VAL with AC_CACHE_CHECK.
(AM_PROG_LIBTOOL): Move after AC_PROG_CC.
* acconfig.h: Empty out.
* Makefile.am (BUILT_EXTRA_DIST): New variable. List 'dist'able
files that are created in the builddir.
(dist-hook): Handle those files.
(libglib_1_3_la_SOURCES): Remove @ALLOCA@. @ALLOCA@ should only
be used in an _LDADD or _LIBADD, since it expands (if necessary)
to 'alloca.o'.
* tests/Makefile.am (BUILT_EXTRA_DIST): New variable.
(dist-hook): Handle $(BUILT_EXTRA_DIST).
2000-10-06 Tor Lillqvist <tml@iki.fi>
* makefile.msc.in: Revamp to be like makefile.mingw.in, make
the MSVC build actually work again.
* gmodule/makefile.msc.in
* gobject/makefile.msc.in
* gthread/makefile.msc.in: New files, like their mingw counterparts.
* gmodule/Makefile.am
* gobject/Makefile.am
* gthread/Makefile.am: Make and distribute them.
* */makefile.mingw.in: Allow override of GLib version number from
the build/win32/module.defs file.
* glib.def: Add new entry point.
Fixes from Hans Breuer:
* glib.h (struct DIR): Keep the last readdir result cached inside
the DIR struct, to enable several DIRs being open simultaneously.
* gwin32.c (g_win32_readdir): Use the above instead of static.
* giowin32.c (g_io_channel_win32_make_pollfd): Insert cast to keep
MSVC happy.
2000-09-29 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in, glib.h: Added errorcheck mutexes. These are
activated through the preprocessor symbol
G_ERRORCHECK_MUTEXES. Need to add an extra word to StaticMutex in
order to achieve this. g_(static_)mutex_* functions instrument the
mutex operations with mutex name and location, when compiled with
-DG_ERRORCHECK_MUTEXES. g_thread_init activates the errorcheck
mutexes, when compiled with -DG_ERRORCHECK_MUTEXES.
* gthread/gthread-impl.c: Added errorcheck mutexes. New
exported function
g_thread_init_with_errorcheck_mutexes, which is called instead of
g_thread_init, when compiled with -DG_ERRORCHECK_MUTEXES. New
static functions
g_mutex_(new|lock|trylock|unlock|free)_errorcheck_impl to
implement errorcheck mutexes.
* gthread/gthread-posix.impl.c, gthread/gthread-solaris-impl.c:
Define the size of a mutex.
2000-09-06 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib.h, gtimer.c, tests/thread-test.c:
s/G_MICROSEC/G_USEC_PER_SEC/
* gthread/gthread-posix.c, gthread/gthread-solaris.c:
s/G_MICROSEC/G_USEC_PER_SEC/ and s/G_NANOSEC/G_NSEC_PER_SEC/
2000-09-01 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib.h: Include gerror.h before it is used for some g_thread_*
functions.
* gthread.c, gthreadpool.c, glib.h: Enable error reporting for
thread creation, namly for g_thread_create, g_thread_pool_new,
g_thread_pool_push and g_thread_pool_set_max_threads.
* tests/thread-test.c, tests/threadpool-test.c: Adapted
accordingly.
* gthread-posix.c (g_thread_create_posix_impl): Use GError to
report errors.
Wed Jul 26 12:59:31 2000 Tim Janik <timj@gtk.org>
* *.[hc]: applied patch from Andreas Persenius <ndap@swipnet.se> that
updates the license headers to the GNU Lesser General Public License,
as well as updating the copyright year to 2000.
2000-07-15 Tor Lillqvist <tml@iki.fi>
* Makefile.am (SUBDIRS): Include the "build" module in GLib, too,
to make it more self-contained. If your CVS client doesn't
automatically get it, do a cvs get build in glib.
* */makefile.mingw.in: Include make.mingw from build in the glib
source directory.
Fri Jul 14 12:22:49 2000 Owen Taylor <otaylor@redhat.com>
* configure.in Makefile.am glib-config.m4 glib.m4: Move
glib-config to glib-config-2.0 move glib.m4 to
glib-2.0.m4
* Makefile.am gobject/Makefile.am gmodule/Makefile.am
gthread/Makefile.am tests/Makefile.am: Change
library names to libglib-1.3.la, etc, so that we
can distinguish glib-1.2 and glib-2.0 on the linkline.
* Makefile.am gobject/Makefile.am gmodule/Makefile.am:
Move include files into /usr/include/glib-2.0.
Thu Jul 6 18:54:49 2000 Owen Taylor <otaylor@redhat.com>
* docs/Makefile.am (EXTRA_DIST): Remove info files
from the build.
2000-05-13 Tor Lillqvist <tml@iki.fi>
* makefile.mingw.in
* tests/makefile.mingw.in
* build-dll: Rename makefile.cygwin(.in) to
makefile.mingw(.in), which better describes what it is. Move the
build of gmodule, gthread and gobject DLLs to makefiles in those
directories. Move resource file handling and build number bump to
build-dll, where it sits much cleaner.
* README.win32
* Makefile.am (EXTRA_DIST): Update accordingly.
* glib.h: Add G_PI, G_PI_2, G_PI_4, G_E, G_LN2, G_LN10 and
G_SQRT2. M_PI etc aren't necessarily in <math.h> in strict ISO C
implementations.
* glib.def: Add g_strcanon.
* gtree.c (g_tree_node_rotate_left): Remove unused variables.
* gwin32.c (g_win32_opendir): Remove unneeded statement.
gmodule:
* makefile.mingw.in: New file, with gmodule stuff
moved from ../makefile.mingw.in.
* Makefile.am: Add to EXTRA_DIST, and add rule to make makefile.mingw.
gobject:
* makefile.mingw.in
* gobject.def
* gobject.rc.in: New files, for Win32 (mingw) build.
* Makefile.am: Add to EXTRA_DIST. Add rules to produce the
corresponding non-*.in files.
* gtype.h: (Win32:) Mark _g_type_fundamental_last for
export/import from DLL.
gthread:
* makefile.mingw.in: New file, with gthread stuff moved from
../makefile.mingw.in.
* Makefile.am: Add to EXTRA_DIST, add rule to build makefile.mingw.
2000-04-25 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-solaris.c (g_mutex_new_solaris_impl): Changed the scope
of the initialized mutex to USYNC_THREAD. Thanks to Soeren
Sandmann <sandmann@daimi.au.dk> for pointing that out.
2000-03-24 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* Makefile.am, gthread/Makefile.am, gmodule/Makefile.am,
tests/Makefile.am: Added various win32 related *.in files to
EXTRA_DIST to let 'make distcheck' procude all the corresponding
files, which it silently fails to do currently.
2000-03-20 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-posix.c (posix_check_for_error): Forgot a '}' in a macro
for DCE-threads. Thanks to Karl Nelson <kenelson@ece.ucdavis.edu>
for pointing that out.
2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Added the missing POSIX_NO_YIELD and
POSIX_NO_PRIORITIES warning messages.
* configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for
real thread support. On solaris pthread_create can be linked to
even in -lc, but it doesn't work then.
* configure.in: Don't use priorities for threads, when the
minimal/maximal priorities couldn't be determined at configure
time.
* configure.in, gthread.c: Always define GSystemThread in
glibconfig.h to represent a system thread.
* configure.in: Do not use native recursive threads, when
possibe. We use some features, that they do not expose (namely the
depth counter).
* glib.h, gthread.c: Redefined GStaticRecMutex. The functions are
now implemented in a different way, which should be way
faster. Alsothere are now functions g_static_rec_mutex_unlock_full
and g_static_rec_mutex_lock_full to leave/enter a recursive mutex
completly.
* gthread.c (g_thread_self): Do not test the system_thread to be
non-zero to speed things up.
* gthread.c (g_mutex_init): Therefore set the system_thread of the
main thread here.
* tests/thread-test.c: Rerun all tests once again, but this time
we fool the system into thinking, that the available thread system
is not native, but userprovided.
* gthread/gthread-posix.c: Don't use priorities for threads,
when the minimal/maximal priorities couldn't be determined at
configure time.
* gthread/gthread-posix.c: Don't check for errors, when
setting the scope of a tread to system, as some posix
implementations can't do that and we don't want the thing to
fail because of that.
2000-02-22 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-posix.c, gthread-solaris.c: check for sysconf
(_SC_THREAD_STACK_MIN), which returns the minimal stack size for
new threads. Patch from Soeren Sandmann <sandmann@daimi.au.dk>.
1999-11-16 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-posix.c, gthread-solaris.c: Changed the prototype of
thread_create and thread_self to return the system thread into
provided memory instead of a return value. This is necessary, as
HPUX has a pthread_t, that is bigger than the biggest integral
type there. Made some more functions static.
* gthread-posix.c: Small fixes for DCE threads: Detaching has to
be done after thread creation for DCE.
Thu Aug 26 15:09:36 1999 Tim Janik <timj@gtk.org>
* Makefile.am:
* gmodule/Makefile.am:
* gthread/Makefile.am: added --export-dynamic so we can load dynmic
modules, (required, according to the libtool 1.3.3 docu).
Sat Jul 24 20:11:35 1999 Tim Janik <timj@gtk.org>
* merged GLib 1.3.0 with glib-1.2.3 from Fri Jul 16 22:18:36.
* incorporated proposed cleanups from gtk-devel-list.
* bumped version number to GLib-1.3.1
* glib.h:
* gqueue.c:
* gstring.c:
* glist.c:
removed string tokenisation (we got g_strsplit() and g_strjoin()
already) and readline functions.
s/g_list_delete/g_list_delete_link.
implemented g_slist_delete_link.
removed notion of g_ATEXIT() macro in glib.h, this is an *internal*
macro, g_atexit() is provided for public consumption.
added GTrashStack inline utility functions.
reimplement double eneded queues.
removed GStack implementation, people can use a queue or a (singly)
linked list for this task.
deprecated g_strescape(), we need the SunOS variants here.
* gdate.c: added DEBUG_MSG() macro to wrap old messages.
* *.*: CVS merges.
* upgrade to libtool 1.3.3.
* README.win32: Update the pthreads snapshot version we want.
Advice how to hand-expand the makefile.*.in files.
* config.h.win32.in: Define values needed by Sebastian Wilhelmi's
new thread stuff.
* glib.def: Add new functions.
* glibconfig.h.win32.in: Update the pthreads snapshot version.
Fix typo.
* gthread.c: Include config.h, guard inclusion of unistd.h. When
using gcc on Win32, g_thread_functions_for_glib_use must be marked
for export here, too.
* gtimer.c: Implement g_usleep on native Win32 using Sleep (which
only has millisecond granularity, though).
* makefile.cygwin.in
* makefile.msc.in: Update pthreads snapshot version. File
name changes. Remove testgthread.
* tests/makefile.cygwin.in
* tests/makefile.msc.in: Add thread-test. Link with gthread lib.
* gthread-posix.c: Guard pthread_attr_setscope call with test
for _POSIX_THREAD_PRIORITY_SCHEDULING, which should be defined
in a <pthread.h> that supports that feature.
1999-06-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in, acglib.m4, acconfig.h, glib.h, gthread.c:
Completed the thread support in GLib. Thread creation,
prioritizing threads, yielding, joining threads as well as
reader/writer locks and recursive mutexes are now in place. Please
test heavily on your platform. It is so far tested on
Linux/i386/pthreads, Solaris/Sparc/pthreads and
Solaris/Sparc/solaristhreads.
* gtimer.c, glib.h: Implement g_usleep (gulong microseconds) for
thread safe sleeping. (sleep() is not MT-safe at all!)
* gutils.c: Avoid compiler warning.
* tests/Makefile.am, tests/thread-test.c: New program to test some
aspects of the thread implementation.
* gthread.c, Makefile.am: Renamed from gmutex.c to reflect the
change of content.
* configure.in: Purged all appearances of nspr.
* gthread/gthread-posix.c, gthread-solaris.c: Added the native
implementations for the GLib's extended thread support.
* gthread/gthread-nspr.c: Removed for good. NSPR is nothing we
would want to build upon.
* gthread/gthread.c: Renamed to gthread-impl.c to avoid
confusion with ../gthread.c (Formerly known as the file called
gmutex.c)
* gthread/testgthread.c: Removed. The new and much extended
tests are in ../tests/thread-test.c.
* gthread/Makefile.am: Changed to reflect the changes above.
Sat May 8 01:52:29 CDT 1999 Shawn T. Amundson <amundson@gtk.org>
* configure.in
gerror.c
gmain.c
gstrfuncs.c
gutils.c
ltconfig
ltmain.sh
gmodule/Makefile.am
gmodule/gmodule.c
gmodule/gmoduleconf.h.in
gmodule/gmodule-beos.c
gthread/Makefile.am: Port to BeOS by myself and Richard Offer.
i.e. gcc -mno-cygwin on cygwin (a.k.a. mingw32, using egcs-1.1.2).
* README.win32: Updated.
* build-dll makefile.cygwin tests/makefile.cygwin: New files.
* glib.h glib.def glibconfig.h.win32 makefile.msc: Slight updates.
* gmain.c: No need to include <fcntl.h> and <io.h> on Win32.
* gmain.c gutils.c testglib.c tests/string-test.c: Test for
NATIVE_WIN32, not _MSC_VER.
* gmutex.c: Must declare g_thread_functions_for_glib_use as
exported (using the GUTILS_C_VAR macro).
* gutils.c gmodule/libgplugin_[ab].c: LibMain not needed.
* gmodule/gmoduleconf.h.win32: Need underscore with gcc.
* gthread/gthread.c: With gcc on Win32, must use memcpy to assign
value of g_thread_functions_for_glib_use (?).
* makefile.msc tests/makefile.msc: Cosmetics.
1999-04-09 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* grand.c, tests/rand-test.c: New files to implement the Mersenne
Twister Pseudo Random Number Generator.
* glib.h, AUTHORS, Makefile.am, tests/Makefile.am: Changed
accordingly.
1999-03-31 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread/gthread-posix.c: Use the right default arguments for the
construction of mutexes and conds for dce threads, these are
&pthread_(cond|mutex)attr_default instead of NULL. Hint from
D. Emilio Grimaldo Tunon <emilio_tunon@nl.compuware.com>.
1999-03-18 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: added new AC_SUBST(GTHREAD_COMPILE_IMPL_DEFINES)
to hold various defines to get the right thread implementation on
different platforms. Also look in -ldce for pthread_create. Should
make it work on HP-UX 10.x.
* gthread/Makefile.am (INCLUDES): Added @GTHREAD_COMPILE_IMPL_DEFINES@.
1999-03-12 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Test for posix threads first, then for dce threads.
* gthread/gthread-posix.c (g_private_get_posix_impl): Fixed
typo for DCE implementation.
1999-03-11 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Revamped the thread configure stuff. Now dce
threads (old posix draft) are recogniced. This is necessary,
because dce threads are in fact working quite differently from
posix threads. Also changed the conditions for checking for MT
safe functions a bit, because G_THREADS_IMPL_NONE still have to
compile thread safe.
* gthread/gthread-posix.c: Now handle both dce and posix
threads. They are sufficently equal.
NOTE: Please do not commit my change to
glib-1-2/{acconfig.h,configure.in,config.h.win32} from 1999-03-03, as
the current change will take care of that too.
Wed Feb 24 00:08:42 CST 1999 Shawn T. Amundson <amundson@gtk.org>
* *.[ch]: inserted additional note to look for ChangeLog and
AUTHORS file for a log of modifications.
1999-02-15 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib.h, glibconfig.h.win32, configure.in: Changed signature of
all g_static_mutex_* functions to take a pointer rather than the
struct itself. This is not an issue at the moment, because those
funcs are really macros, but is it un'G'ish and might fall on our
feet in the future.
* gthread/testgthread.c (test_mutexes): Use new signature of
g_static_mutex* functions.
1999-02-10 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib.h: s/G_LOCK_DECLARE/G_LOCK_DEFINE/ throuhout glib. Added
G_LOCK_EXTERN macro to declare a lock externally.
1999-02-08 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in, acconfig.h: Changed the test for getpwuid_r to
exclude those systems (i.e. IRIX), that set ENOSYS after the call.
Test, if pthread_getspecific is posix like or something different,
as on PCThreads.
* gthread/gthread-posix.c (g_private_get_posix_impl): Use the
HAVE_PTHREAD_GETSPECIFIC_POSIX macro to determine, which signature
to use for pthread_getspecific.
* README.win32: More text.
* config.h.win32 glibconfig.h.win32: Update to match the
corresponding generated files on Unix.
* makefile.msc: Update with new source files, and gthread
library. Use the compiler flag -MD instead of using -D_DLL and
"/nodefaultlib:libc msvcrt.lib" in the link phase.
* glib.def: Include new functions, drop removed ones.
* glib.h: Add comments about main loop and polling on Win32. (In
general, it's only for the GIMP's use.) Add Win32 IO Channel
functions. Remove the obsoleted old IO Channel stuff (which was
in #if 0 already).
* giowin32.c: New file.
* gmain.c: Include config.h, conditionalize <sys/time.h>
inclusion. Add g_poll implementation for Win32 (only for the
GIMP's needs for now, it's hard or even impossible to be as clean
and generic as on Unix). Implement g_get_current_time on Win32. If
threads aren't supported, don't try to wake up main thread's
loop. On Win32, use a semaphore and not a pipe to wake up the main
loop.
* gmessages.c: On Win32, allocate a console window if the standard
output handle is invalid before writing to stdout, and reopen stdout
to that console window.
* giochannel.c: Conditionalize unistd.h inclusion. Some indentation
cleanup.
* gstrfuncs.c: Include <signal.h>.
* gutils.c: On Win32, also check the HOMEDRIVE and HOMEPATH
environment variables.
* gmodule-dl.c gmodule-dld.c: In
_g_module_build_path, don't add the "lib" prefix and
".so" or ".sl" suffix if already there.
* gmodule-win32.c: Likewise for the ".dll" suffix.
* gthread-posix.c: Conditionalize <sys/time.h> inclusion.
1999-01-07 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gutils.c (g_get_any_init): Here we must replace getpwuid by
getpwuid_r, but as I do not know how for now, I just made a FIXME
note ;-)
* gdate.c (g_date_set_time): localtime --> localtime_r to make it
thread safe.
* configure.in: We do not need to check for broken solaris mutex
intitializer any longer. Provide a macro to show the used thread
implementation. Not nice, but this is needed until thread support
is completed here inside glib.
* gthread/testgthread.c: conditionally compile according to the
G_THREADS_IMPL_??? macros.
(test_private_func): use rand_r instead of rand to make it
thread safe.
* configure.in: ditch whitespace before GLIB_SYSDEFS #includes,
the # needs to be in column 1
* gthread/testgthread.c: cleanups
* tests/node-test.c: #include unistd.h for exit()
-Yosh
1998-12-18 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in (have_threads): Changed the last pthread_cond_init
to pthread_attr_init.
1998-12-18 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* testgthread.c (new_thread): As a joinable thread seems to be the
default on posix, leave the explicit setting out, as it causes
problems on some older platforms.
Wed Dec 16 22:32:13 CST 1998 Shawn T. Amundson <amundson@gtk.org>
* glib.h:
giounix.c: s/g_main_poll_add/g_main_remove_add/g
s/g_main_poll_remove/g_main_remove_poll/g
s/g_main_poll_add_unlocking/g_main_add_unlocking_poll/g
(from Tim Janik)
* gthread-posix.c: use g_free in mutex_free (from Tim Janik)
Thu Dec 17 03:38:57 1998 Tim Janik <timj@gtk.org>
* Makefile.am: -DG_LOG_DOMAIN="GThread", we don't need an extern
variable for that (noticed by Joel Becker <jlbec@ocala.cs.miami.edu>)
Wed Dec 16 03:16:58 1998 Tim Janik <timj@gtk.org>
* configure.in: version bump to 1.1.8, binary age 0, interface age 0.
* glib.h: changed g_lock() to G_LOCK(), g_unlock() to G_UNLOCK() and
g_trylock() to G_TRYLOCK(), since these are macros that expand to
nothing with --disable-threads.
changed G_LOCK_DEFINE() to G_LOCK_DECLARE() and introduced
G_LOCK_DECLARE_STATIC() to achive the results of static G_LOCK_DECLARE().
changed semantics of g_thread_supported to g_thread_supported() so it
can be used as a function like g_module_supported(). the actuall
definition is still a macro that expands into a variable for
performance reasons though.
various indentation and coding style cleanups.
* configure.in: added --enable-threads that defaults to yes.
* gmutex.c: changed tests g_thread_supported to g_thread_supported (),
changed variable settings of g_thread_supported
to g_threads_got_initialized.
garray.c:
gcache.c:
gdataset.c:
gdate.c:
ghash.c:
glist.c:
gmain.c:
gnode.c:
gslist.c:
gstring.c:
gtree.c:
gutils.c:
changed s/g_lock/G_LOCK/, s/g_unlock/G_UNLOCK/,
s/static G_LOCK_DEFINE/G_LOCK_DECLARE_STATIC/.
1998-12-15 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* Makefile.am (EXTRA_DIST): updated.
* testgthread.c, gthread-*.c: Changed private to private_key to
avoid problems when compiling with under C++.
1998-12-15 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gthread-none.c:
s/g_mutex_functions_for_glib_use/g_thread_functions_for_glib_use/
* ChangeLog: from now on there is an extra ChangeLog for gthread
branch. See the ChangeLog for details of the changes.
In brief overview:
- The set of threading functions can be set
- A default implementation is provided in -lgthread
- All static data structures are locked using these
functions if g_thread_init() is called.
