The gsocketclient-slow test needs this, otherwise connect() succeeds
immeidately and the test fails, because it is checking that cancellation
works. We weren't installing it for installed tests.
It's necessary sometimes for installed tests to be able to run with a
custom environment. For example, the gsocketclient-slow test requires an
LD_PRELOADed library to provide a slow connect() (this is to be added in
a followup commit).
Introduce a variable `@env@` into the installed test template, which we
can override as necessary when generating `.test` files, to run tests
prefixed with `/usr/bin/env <LIST OF VARIABLES>`.
As the only test that requires this currently lives in `gio/tests/`, we
are only hooking this up for that directory right now. If other tests in
future require this treatment, then the support can be extended at that
point.
There's no /tmp directory on Windows.
Use g_get_tmp_dir(), and adjust the test to work with that.
The test *still* checks the basename of the new CWD, it just
doesn't need to be "tmp" anymore.
envp in spawn() functions is the *whole* environment table
for the child process. Including PATH. Thus, unless PATH is explicitly
put into that table, the process will be spawned without PATH.
Since on Windows binaries are found via PATH instead of LD_LIBRARY_PATH
or whatever, almost no program (unless installed in WINDIR, maybe)
can run without a PATH. Certainly not test programs - meson
adds bld subdirs to the PATH to make sure that test programs
use uninstalled glib at runtime.
So make sure that PATH is passed along.
Windows \r\n EOLs strike again. The test already knows about LINEEND,
so make it use LINEEND more (instead of swithcing pipes
to binary mode). This also applies to counting the bytes
read.
With winsock sending messages to NULL results in G_IO_ERROR_NOT_CONNECTED
instead of G_IO_ERROR_FAILED.
MSDN says:
WSAENOTCONN
10057
Socket is not connected.
A request to send or receive data was disallowed because the socket is not connected
and (when sending on a datagram socket using sendto) no address was supplied.
So this is a direct mapping of the implementation error.
Covering it up in the wrapper (by converting it to G_IO_ERROR_FAILED)
doesn't seem feasible or needed (no one, except for the testsuite,
really cares which unrecoverable error is returned by sendto()).
getaddrinfo() in winsock can't understand scope IDs.
There's no obvious way to fix that, short of re-implementing
that function, so disable that part of the test on Windows.
Previously once the end of addresses was reached it would return
NULL even if it was waiting on a dns response. Now it will keep
waiting so all addresses are received.
Fixes#1680
Currently, the actual asynchronous work, represented by
asynchronous_cancellation_run_task, was over before the GCancellable
could be triggered. While that doesn't invalidate the purpose of the
test, since it's fundamentally about cancellation, it would be
nicer if the cancellation actually served some purpose instead of
being a mere formality.
https://gitlab.gnome.org/GNOME/glib/issues/1608
It needs investigating and fixing properly, but let’s not let it disrupt
the CI in the meantime.
Follow-up in https://gitlab.gnome.org/GNOME/glib/issues/1679.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In the writev() tests, the handling of cancellation is tested. However,
the GCancellable was cancelled after the writev_async() call was
started. Depending on the implementation of the writev() vfunc, the
operation could be done in a thread or in callbacks on the current
thread’s main loop. If done in a separate thread, there’s a chance that
enough of the write could happen before cancellation reaches that thread
that the overall operation returns success with a short write.
That would cause the test to fail, sometimes.
Avoid that by cancelling the GCancellable before starting the writev()
operation.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
It would always be initialized but initialize it to NULL to silence the
compiler, and also check that it is not NULL anymore when we expect it
to contain a valid value.
../gio/tests/desktop-app-info.c: In function ‘test_fallback’:
../gio/tests/desktop-app-info.c:191:18: warning: ‘app’ may be used uninitialized in this function [-Wmaybe-uninitialized]
g_assert_true (g_app_info_equal (info1, app));
^~~~~~~~~~~~~~~~
It needs investigating and fixing properly, but let’s not let it disrupt
the CI in the meantime.
Follow-up in https://gitlab.gnome.org/GNOME/glib/issues/1653.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
There's a race here, as revealed by Debian's buildds.
We call g_dbus_proxy_new() to create a proxy for the test server, with
callback proxy_ready() Then we call g_spawn_command_line_async() to
start the test server, and then start the main loop.
proxy_ready() assumes that the test server hasn't been started when it
is called. But there is no guarantee that these asynchronous operations
involving spawning a process won't happen in a different order that mean
the bus name *does* have an owner.
What we can do is move starting the server inside of proxy_ready(), so
we know that the test server isn't started until after the proxy is
created. We also add an assertion to check that it is indeed not running
before we execute it.
If we can't find the mount point for target or tmp (as currently
happens on Launchpad autobuilders, and perhaps relatedly, on a
development system that uses btrfs), that's probably not great but is
not really the point of this test.
Signed-off-by: Simon McVittie <smcv@collabora.com>
In a minimal autobuilder environment, this test could conceivably be
the first thing to refer to ~/.local.
Modified by Iain Lane <laney@debian.org>: Don't try to create ~/.local
from tests, but skip if it doesn't exist.
Signed-off-by: Simon McVittie <smcv@collabora.com>
So long, and thanks for everything. We’re a Meson-only shop now.
glib-2-58 will remain the last stable GLib release series which is
buildable using autotools.
We continue to install autoconf macros for autotools-using projects
which depend on GLib; they are stable API.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Calling
g_list_model_get_item (store, 0);
g_list_model_get_item (store, -1u);
does not return NULL for the second call, as it should.
This was showing up in GTK+ list model tests.
Add option to not encode resource data into the C source file
in order to embed the data using `ld -b binary`. This improves compilation
times, but can only be done on Linux or other platforms with a
supporting linker.
(Rebased by Philip Withnall, fixing minor rebase conflicts.)
Fixes#1489
This reverts commit 52bab0254a.
It silently conflicted with another commit,
90ca3b4dd0, which was merged later than
it. I’ve kept commit 90ca3b because it also frees the GError; 52bab
doesn’t.
This is my failure to rebase and test old branches before merging them,
instead of assuming that the lack of automatically detected merge
conflicts actually means there are no merge conflicts.
Allow any type of private key in PEM files by treating PEM guards ending
with "PRIVATE KEY-----" as a private key instead of looking for a
pre-defined set of PEM guards. This enables the possibility for custom
GTlsBackend to add support for new key types.
Test cases have been expanded to ensure PEM parsing works for private
key when either header or footer is missing.
Encrypted PKCS#8 is still rejected. Test case has been added for this to
ensure behaviour is the same before and after this change.
The `apps` subprocess is spawned by desktop-app-info to interpret the
forest of .desktop files, and its output is provided on stdout. If debug
output is mixed up with that output, tests which parse the output fail.
Disable the debug output from the subprocess to prevent this.
The new debug output appeared as a result of recent changes to the
desktop file dir monitoring code in gdesktopappinfo.c.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The appinfo-test.desktop file is set up with an Exec= path which points
to the compiled and installed appinfo-test utility. When running the
tests uninstalled, however, this might not be present, which causes
loading appinfo-test.desktop to fail.
Split appinfo-test.desktop in two: keep the existing
appinfo-test.desktop for tests which need to launch appinfo-test, and
add a new appinfo-test-static.desktop for tests which don’t launch
anything (and, for example, just inspect GAppInfo properties).
appinfo-test-static.desktop uses an Exec= line which should always be
present (`true`) so it should never fail to load.
Allow the tests using appinfo-test-static.desktop to be run uninstalled
or installed. Allow the tests using appinfo-test.desktop to be skipped
if loading appinfo-test.desktop fails, which is an indicator that the
test is running uninstalled.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert() is for runtime code, and can be compiled out. g_assert_*()
cannot be compiled out, and give more helpful failure messages for
specific types.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test useless. The g_assert_*() functions provide more helpful feedback
on failure too.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
By encoding the path to the appinfo-test binary in the .desktop files,
we can avoid a chdir() call in the tests, which was a bit ugly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/538
This partially reverts commit 27b5fb5892.
The infrastructure for disabling a test is kept, but the appinfo and
desktop-app-info tests no longer need to be run serially.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1601
This checks if the stream is writable before writing
to it. If the write succeeded with no error, then the
stream has to be also writable after the write
As RFC 8305 recommends we can start multiple DNS queries in parallel
to more quickly make an initial response, especially when one is
particularly slow/broken.
This is to ensure that the generated code is still compilable by the
running compiler, and see whether we can read the things in there
properly.
See issue #1580.
Otherwise they fill your real ~/.config/mimeapps.list with rubbish and
race for access to it. This is arguably not good.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1514
With the changes to limit GVariant type nesting (commit 7c4e6e9fbe),
it’s now possible to have a valid type signature which is not a valid
GVariant type when enclosed in parentheses (to make it a tuple).
Check for that when parsing the signature field in a D-Bus message.
Includes a unit test.
oss-fuzz#11120
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This test is intended to verify the fix for
https://bugzilla.gnome.org/show_bug.cgi?id=787731, which was that
g_file_query_filesystem_info() would return stale information for the
mount. After replacing a read-only mount with a read-write mount, this
test used to only fail if G_FILE_ATTRIBUTE_FILESYSTEM_READONLY was TRUE
and yet the file could be opened for writing. In particular, if (due to
a test bug) the file really was still on a read-only filesystem, the
test would pass.
Now that we have fixed that bug in the test, we can make a stronger
assertion.
fusermount -z behaves like umount --lazy, which is documented thus:
> Detach the filesystem from the file hierarchy now, and clean up all
> references to this filesystem as soon as it is not busy anymore.
Without this, the call to `fusermount -u` often fails with:
/usr/bin/fusermount: failed to unmount /home/wjt/src/gnome/glib/_build/dir_bindfs_mountpoint: Device or resource busy
which causes the subsequent call to bindfs to fail:
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
It's not clear what is causing the mount to be busy. Inserting a
g_usleep (100 * 1000) before the calls to `fusermount -u` also works to
make the problem go away, but for the purposes of this test the
important point is that the mount is detached from the directory, for
which a lazy unmount is fine.
Fixes#1590.
In practice, fusermount -u often fails:
/usr/bin/fusermount: failed to unmount /home/wjt/src/gnome/glib/_build/dir_bindfs_mountpoint: Device or resource busy
which causes the subsequent calls to bindfs to fail:
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
This may or may not cause the current test run to fail, but it reliably
causes a repeat run of the test to fail. This change causes the current
run to fail instead.
Currently, GDBusProxy:g-name-owner only notifies changes to the unique
name owner of the remote object in case the proxy was constructed for a
well-known name.
That sounds like an artificial restriction, and it's convenient to
connect to notify::g-name-owner if a proxy instance has already been
created for an unique name, instead of additionally using
g_bus_watch_name() to track the owner.
To fix this, always connect to NameOwnerChanged after the proxy is
initialized, instead of only doing so when the proxy was constructed for
a well-known name.
https://bugzilla.gnome.org/show_bug.cgi?id=791316https://gitlab.gnome.org/GNOME/glib/issues/1310
