Tue Aug 14 02:06:10 2007 Tim Janik <timj@imendio.com>
* glib/gthread.c (g_once_init_enter_impl): prevent race covered
by g_once_init_enter(), by checking for previous initializations
before entering initialisation branch.
* tests/onceinit.c: added multi-thread/multi-initializer stress test
using unoptimized g_once_init_enter_impl().
svn path=/trunk/; revision=5701
Mon Aug 13 14:21:44 2007 Tim Janik <timj@imendio.com>
* tests/onceinit.c: test g_once_init_*() before and after
g_thread_init() and test concurrency resolution.
svn path=/trunk/; revision=5698
2007-08-08 Matthias Clasen <mclasen@redhat.com>
* glib/gmarkup.c (append_escaped_text): Handle restricted
characters by converting them to numeric character
entities. (#464145, Andreas Monitzer)
* tests/markup-escape-test.c: Add tests for restricted
characters and numeric character entities.
svn path=/trunk/; revision=5684
Thu Jul 12 17:31:08 2007 Tim Janik <timj@imendio.com>
* tests/slice-concurrent.c: beautified output somewhat. fixed long
sleeps by reducing sleep accumulating and using randomized re-scheduling
(which works on UP and SMP). increased possible blocksizes.
svn path=/trunk/; revision=5631
Thu Jul 12 15:46:40 2007 Tim Janik <timj@imendio.com>
* glib/gslice.c: migrate per-thread magazine caches from single-thread
scenario to first thread using GSlice after g_thread_init(); based on
a patch by Tor Lillqvist, fixes#331853.
removed warning about g_thread_init() being called after other glib
functions (in particular g_slice* calls), because GSlice can cope
with this now and the rest of glib is believed to cope as well.
* tests/slice-threadinit.c: new test program which tests GSlice working
across g_thread_init() calls.
svn path=/trunk/; revision=5629
2007-07-09 Loïc Minier <lool@dooz.org>
* tests/refcount/closures.c: (main): Output newlines after thousand
iterations of the inner-loop of the closures test; this helps having
smaller lines and continuously outputting new lines. (#447048).
svn path=/trunk/; revision=5609
2007-06-04 Matthias Clasen <mclasen@redhat.com>
Add support for a number of special directories, as
defined by the xdg-user-dirs specification. (#432651,
Bastien Nocera, Emmanuele Bassi, Michael Natterer)
* glib/glib.symbols:
* glib/gutils.[hc]: Add the GUserDirectory enum and
g_get_user_special_dir(), with implementations based
on the xdg-user-dirs spec and on native interfaces
for Win32 and Carbon.
* configure.in: Add Carbon checks.
* tests/tetsglib.c: Test g_get_user_special_dir().
svn path=/trunk/; revision=5528
2007-06-03 Yevgen Muntyan <muntyan@tamu.edu>
* glib/gregex.c: fixed g_regex_fetch_named* for cases when (?J)
is used inside a pattern (#442265, comment #12).
* tests/regex-test.c: Test it.
svn path=/trunk/; revision=5526
2007-06-03 Yevgen Muntyan <muntyan@tamu.edu>
* glib/gregex.c:
* glib/gregex.h: New functions: g_regex_ref(), g_regex_unref() which
replaces g_regex_free(); g_match_info_get_regex(), g_match_info_get_string();
g_regex_check_replacement().
Made g_match_info_expand_references() accept NULL; changed GRegexEvalCallback
to take only arguments which are likely to be actualy used.
* docs/reference/glib/glib-sections.txt:
* glib/glib.symbols: Added new functions.
* tests/regex-test.c: Test them.
* docs/reference/glib/tmpl/gregex.sgml: Updated GRegexEvalCallback docs.
svn path=/trunk/; revision=5524
2007-05-29 Marco Barisione <marco@barisione.org>
* glib/gregex.c: Fix g_regex_fetch_named() and
g_regex_fetch_named_pos() when G_REGEX_DUPNAMES is used (#434358,
Yevgen Muntyan and #419376, Marco Barisione, patch by Yevgen Muntyan)
svn path=/trunk/; revision=5518
2007-05-11 Matthias Clasen <mclasen@redhat.com>
* glib/goption.c: Allow G_OPTION_ARG_CALLBACK for
G_OPTION_REMAINING. (#437297, Dave Benson)
* tests/option-test.c: Add a test for this.
svn path=/trunk/; revision=5487
2007-04-24 Michael Natterer <mitch@imendio.com>
* gobject/gparamspecs.c (param_string_validate): don't free or
modify static strings, dup them when needed and clear the
G_VALUE_NOCOPY_CONTENTS flag. Fixes bug #432895.
* tests/gobject/paramspec-test.c: test all GParamSpecString
validations with static and allocated strings.
svn path=/trunk/; revision=5454
2007-04-11 Emmanuele Bassi <ebassi@gnome.org>
* glib/ghash.[ch]: Add g_hash_table_get_keys() and
g_hash_table_get_values(), API to retrieve the keys
and values inside an hash table in list form. (#413133)
* glib/glib.symbols: Update symbols.
* tests/hash-test.c: Exercise newly added functions.
svn path=/trunk/; revision=5444
2007-03-22 Chris Wilson <chris@chris-wilson.co.uk>
* glib/gkeyfile.c: Track whether the last key=value pair in a group
is a blank line and during to_data() only insert a new blank line
betweens group in its absence. This allows the beautification of the
GKeyFile and prevents newlines being inserted indefinitely. (#420686)
* tests/keyfile-test.c (test_reload_idempotency): Test that after a
single beautification pass, g_key_file_to_data() does not alter its
input data.
svn path=/trunk/; revision=5431
2007-03-17 Hans Breuer <hans@breuer.org>
* glib/makefile.msc.in glib/pcre/makefile.msc
glib/update-pcre/update.sh : define PCRE_STATIC to reflect the
inclusion of pcre as LIB, not stand-alone DLL. Also set NEWLINE=-1
to match any newline by default, use of ../../build/win32/make.msc
* glib/gregex.h : minimal includes of <glib/*.H> instead of <glib.h>
* glib/gnulib/makefile.msc : make use of ../../build/win32/make.msc
* tests/regex-test.c(verbose): don't pass a string containing '%'
as first parameter to g_print ()
(test_match) : for the unexpected case output pattern and string
escaped
* tests/child-test.c tests/slice-color.c : fix c99ism
* tests/slice-test.c : fix c99ism and gccism
* tests/mapping-test.c tests/base-64-tests.c : don't
#include <unistd.h> unconditionally
* tests/option-test.c : use G_GINT64_CONSTANT() instead of direct LL
* tests/makefile.msc.in : more tests build
svn path=/trunk/; revision=5423
2007-03-06 Matthias Clasen <mclasen@Redhat.com>
* tests/Makefile.am: Apply a patch by Loïc Minier
to fix building with -Wl,-z,defs. (#149144)
svn path=/trunk/; revision=5367
2007-02-16 Soren Sandmann <sandmann@redhat.com>
* tests/sequence-test.c: For move, test moving between two
sequences. Add test for swap.
* glib/gsequence.c: Replace splay tree with a treap.
(check_node): Add checks for the treap invariants.
svn path=/trunk/; revision=5337
2007-02-07 Soren Sandmann <sandmann@daimi.au.dk>
* tests/sequence-test.c (compare_items): Force an arbitrary order
on otherwise identical items.
* glib/gsequence.c: Add comment discussing splay trees vs. other trees.
* glib/gsequence.c (is_end): Add fast path for the common case
when the node is not actually the end node.
svn path=/trunk/; revision=5328
2007-02-03 Soren Sandmann <sandmann@daimi.au.dk>
* glib/gsequence.c (struct _GSequence): Add a new 'real_sequence'
field.
(g_sequence_new): Initialize real_sequence to the sequence
(g_sequence_sort_iter): Set real_sequence of the temporary
sequence to the real sequence.
(g_sequence_sort_changed_iter): Same
(g_sequence_insert_sorted_iter): Same
(g_sequence_search_iter): Same
(g_sequence_iter_get_sequence): Return real_sequence
* tests/sequence-test.c (compare_iters): Insert assertions that
the iters point to the sequence being manipulated.
svn path=/trunk/; revision=5323
2007-02-03 Soren Sandmann <sandmann@daimi.au.dk>
* glib/gsequence.[ch]: New files implementing GSequence, a list
implemented using a binary tree.
* glib/glib.h, glib/glib.symbols: Update for GSequence.
* docs/reference: Add documentation for GSequence
* tests: Add sequence-test.c, a thorough test of all of
the GSequence API.
svn path=/trunk/; revision=5322
2007-01-12 Matthias Clasen <mclasen@redhat.com>
* glib/gkeyfile.c: Rework the handling of invalid
keys/groups again. We are back to being liberal about
what we accept, and only reject things that would lead
to non-rereadable keyfiles.
* tests/keyfile-test.c: Adapt tests.
svn path=/trunk/; revision=5254
2007-01-03 Behdad Esfahbod <behdad@gnome.org>
* glib/gutils.h: Fix bug in g_bit_nth_lsf (#371631) and use
__builtin_clzl for g_bit_storage if available (#371670).
* tests/Makefile.am:
* tests/bit-test.c: New test, to test g_bit_* operations against
naive and builtin implementations.
svn path=/trunk/; revision=5200
Thu Dec 28 12:50:31 2006 Tim Janik <timj@imendio.com>
* glib/gslice.h, glib/gslice.c: implemented static debugging
hash-tree to validate slice adresses and sizes with G_SLICE=debug-blocks.
use abort() to exit in mem_error() to allow catching of these in gdb.
abort programs with a descriptive error message if g_thread_init() is
called after GSlice was in use. previously this just silently corrupted
the magazines.
* glib/ghash.c (struct _GHashNode): reordered fields to keep 8-byte
pointer alignment on 64bit systems and request smaller slice sizes
on 32bit systems.
* tests/slice-test.c: support '~' option flag to introduce slice
allocation/release corruption with a significant probability. this
allowes testing of G_SLICE=debug-blocks.
2006-12-24 Matthias Clasen <mclasen@redhat.com>
* tests/run-collate-tests.sh:
* tests/unicode-collate.c: Silently skip tests if
we can't set LC_COLLATE to en_US. (#336438)
2006-12-19 Matthias Clasen <mclasen@redhat.com>
* glib/gkeyfile.c (g_key_file_is_key_name): Accept
'/', '+' and '.' in key names, since gnome-vfs uses
mime types as keys in some cache.
2
2006-12-18 Matthias Clasen <mclasen@redhat.com>
* glib/gkeyfile.c: Tighten up the check for allowed
key and group names. (#343191, Tommi Komulainen)
* tests/keyfile-test.c: Test handling of key and group names.
2006-12-14 Matthias Clasen <mclasen@redhat.com>
* glib/gkeyfile.c (g_key_file_add_group): If the group
is already there, make it current. (#385910, Joe Halliwell)
* tests/keyfile-test.c: Add a test for duplicate groups/keys.
2006-10-15 Sebastian Wilhelmi <seppi@seppi.de>
* tests/Makefile.am: Compile errorcheck-mutex-test with thread
libraries explicitly. (#74748, Javier Villavicencio)
Wed Aug 16 13:59:07 2006 Tim Janik <timj@gtk.org>
* tests/gobject/Makefile.am:
* tests/gobject/singleton.c: added test program which demonstrates
and checks singleton construction.
2006-08-05 Matthias Clasen <mclasen@redhat.com>
* glib/guniprop.c (g_unichar_toupper, g_unichar_tolower)
(real_toupper, real_tolower): If a character can't be converted,
don't replace it with a NUL byte, but leave it unchanged.
(#348491, Nikolai Weibull)
* tests/unicode-caseconv.c: Adapt to this change.
* tests/unicode-caseconv.c (main): Add a comment to point out
a quirk in the test data that we are working around here.
2006-07-31 Behdad Esfahbod <behdad@gnome.org>
* glib/gunidecomp.c (_g_utf8_normalize_wc): Update to reflect Unicode
PR #29 (#348694, Nikolai Weibull)
* tests/unicode-normalize.c (encode), (test_form): Make output more
useful, reporting the unexpected output of the test.
2006-06-20 Matthias Clasen <mclasen@redhat.com>
* glib/gtimer.c (mktime_utc): Fix an off-by-2 error
in the leap year calculation. (#344905, Dan Winship)
* tests/testglib.c (main): Change the test data for
the g_time_val_from_iso8601 tests to expose an off-by-2
error in the leap year calculation.
2006-06-16 Matthias Clasen <mclasen@redhat.com>
* tests/file-test.c (test_mkstemp): Add tests.
* glib/gfileutils.c (g_mkstemp): Allow the XXXXXX to occur
inside the template, not just at the end.
2006-06-12 Emmanuele Bassi <ebassi@cvs.gnome.org>
* glib/gbookmarkfile.h:
* glib/gbookmarkfile.c (g_bookmark_file_remove_item): Return
a boolean instead of void.
* tests/bookmarkfile-test.c (test_modify): Add a test case
for g_bookmark_file_remove_item().
2006-06-01 Matthias Clasen <mclasen@redhat.com>
* glib/giochannel.c (g_io_channel_write_chars): Avoid
running in an assertion with small writes. (#343566, Chris
Wilson)
* tests/iochannel-test.c: Add a testcase for small writes.
2006-05-28 Matthias Clasen <mclasen@redhat.com>
* tests/markups/expected-*: Output that test-markup
is expected to produce when run on the valid gmarkup
examples.
* tests/markup-test.c: Only dump the results of the
first, unchunked parse, to compare it against the expected
output.
* tests/run-markup-tests.sh: For valid examples, compare
the output of test-markup against the corresponding
expected-<n> file.
2006-05-09 Sebastian Wilhelmi <wilhelmi@google.com>
* glib/gthreadinit.h: Renamed to glib/gthreadprivate.h and moved
system thread identifier comparision and assignment macros from
glib/gthread.c to glib/gthreadprivate.h.
* glib/Makefile.am, glib/gatomic.c, glib/gconvert.c, glib/gmain.c,
glib/gmem.c, glib/gmessages.c, glib/grand.c, glib/gslice.c,
glib/gthread.c, glib/gutils.c, gthread/gthread-impl.c: Use
glib/gthreadprivate.h instead of glib/gthreadinit.h.
* gthread/gthread-impl.c: Use GSystemThread instead of GThread for
owner determination. This fixes#311043 and is mostly modeled
after the patch from jylefort@FreeBSD.org.
2006-05-08 Matthias Clasen <mclasen@redhat.com>
* tests/convert-test.c (test_one_half): Use encoding names which
may work better on Solaris. (#340434, Alessandro Vesely)
2006-05-03 Matthias Clasen <mclasen@redhat.com>
* tests/base64-test.c (test_incremental): Use malloced memory
instead of stack-allocated, so that MALLOC_CHECK_=2 catches
the OOB write...
2006-04-18 Matthias Clasen <mclasen@redhat.com>
* glib/gkeyfile.h:
* glib/glib.symbols:
* glib/gkeyfile.c: Add api to get and set doubles and
lists of doubles. (#164719, Maurizio Monge, Dom Lachowicz)
* tests/keyfile-test.c: Add tests for new api.
2006-04-17 Matthias Clasen <mclasen@redhat.com>
* glib/gcompletion.c (g_completion_complete_utf8): Make passing
NULL for new_prefix work as documented. (#338845, Yevgen Muntyan)
* tests/completion-test.c: Test that passing NULL for
new_prefix in g_completion_complete_utf8 works.
* glib/gthreadpool.c: Make sure
g_thread_pool_stop_unused_threads() actually stops unused threads
and global limits (like max idle time and max unused threads) can
be set without creating a thread pool first. Fixed#335215 (patch
from Chris Wilson).
* tests/threadpool-test.c: Added two new tests, tests setting
global limits before creating a thread pool. The second test
makes sure unused threads are actually stopped when using the
g_thread_pool_stop_unused_threads().
2006-04-05 Behdad Esfahbod <behdad@gnome.org>
* tests/option-test.c: Check the return value of g_get_prgname for
NULL before passing to strcmp.
* tests/slice-test.c: Report the correct name in Usage summary.
2006-03-27 Dom Lachowicz <cinamod@hotmail.com>
* tests/option-test.c: Copy-and-paste error slipped into test5. Enable
test5, as per Matthias' comments in bug 329548#c11.
* glib/gthreadpool.c: Updated the documentation to explain that
when the maximum threads is > 1 the sort functionality is not 100%
accurate due to the ramdom nature of the scheduler choosing which
threads to execute. Fixes bug #334943.
* tests/threadpool-test.c: Disabled the debugging by default and
fixed the sort test to set the maximum threads to 1 to guarantee
the thread entry function is called in order.
2006-03-23 Emmanuele Bassi <ebassi@cvs.gnome.org>
* configure.in: Check for timegm.
* glib/gtimer.h:
* glib/gtimer.c:
* glib/glib.symbols:
* docs/reference/glib/glib-sections.txt: Added g_time_val_to_iso8601
and g_time_val_from_iso8601, to convert a GTimeVal to and from an
ISO 8601 encoded date.
* tests/testglib.c: Added test cases for g_time_val_to_iso8601()
and g_time_val_from_iso8601() functions.
2006-03-14 Matthias Clasen <mclasen@redhat.com>
* glib/gutils.c (g_parse_debug_string): Don't read past the
end of the string. (#334471, Morten Welinder)
* tests/asyncqueue-test.c:
* tests/list-test.c:
* tests/slist-test.c: Updated to test _sort, _sort_with_data,
_insert_sorted and _insert_sorted_with_data API.
Wed Jan 25 16:39:18 2006 Tim Janik <timj@imendio.com>
* glib/gslice.c: honour g_mem_gc_friendly settings when freeing
slices, make sure g_mem_gc_friendly is properly initialized.
* gmem.[hc]: ensure g_mem_gc_friendly is initialized from G_DEBUG upon
the first allocation. applied some branching optimizations.
* docs/macros.txt: reflected --enable-gc-friendly change and
described ENABLE_GC_FRIENDLY_DEFAULT as well as G_DEBUG=gc-friendly.
* configure.in: changed --enable-gc-friendly=yes to define
ENABLE_GC_FRIENDLY_DEFAULT.
* glib/garray.c: changed ENABLE_GC_FRIENDLY macro #ifdef-s to
if (G_UNLIKELY (g_mem_gc_friendly)).
* glib/gtree.c:
* glib/ghash.c: removed ENABLE_GC_FRIENDLY code which is now taken
care of by g_slice_free1().
* tests/slice-test.c: fixed leaks, reported by Kjartan Maraas.
2006-01-24 Matthias Clasen <mclasen@redhat.com>
* tests/unicode-encoding.c: Use UTF-16LE as target encoding
on all little-endian systems. (#143380, Marc Moorcroft)
2006-01-17 Sebastian Wilhelmi <seppi@seppi.de>
* glib/gthreadpool.c: To avoid deadlocks get rid of the settings
G_LOCK. Use the unused_thread_queue lock instead. Change
g_thread_pool_thread_proxy such that threads only wait on
non-exlusive pools for at most a 1/2 second. Do not reorder tasks
due to superfluous tasks. Global tasks wait at most for
max-idle-time milliseconds. Make sure, that no task is woken up
twice for the same event via a wakeup_serial. This fixes#324228.
* tests/threadpool-test.c: Adapt test accordingly. Do not pass
invalid NULL into the thread pools. This as well fixes#327290.
* docs/reference/glib/glib-sections.txt:
* glib/glib.symbols:
* glib/gthreadpool.[ch]:
- Added new API g_thread_pool_get_idle_time() and
g_thread_pool_set_idle_time(). (#324228).
* tests/threadpool-test.c:
- Updated test case to do thread pool sorting, thread pool with
no sorting and a thread pool with idle thread timeouts.
2005-12-20 Matthias Clasen <mclasen@redhat.com>
* glib/glib.symbols:
* glib/gthreadpool.h:
* glib/gthreadpool.c (g_thread_pool_set_sort_function): New function
to sort tasks pushed into a threadpool. (#324479, Martyn Russell)
* tests/threadpool-test.c: Test this.
Tue Dec 20 18:14:14 2005 Tim Janik <timj@imendio.com>
* glib/gslice.[hc]: added mem_error() and mem_assert() to test and
handle errors without depending on gmessage.c which might not be
setup when the error occours.
removed G_SLICE_CONFIG_ALWAYS_FREE config option, fixed the code so
always freeing can be achieved by adjusting the working set time to
0 with G_SLICE_CONFIG_WORKING_SET_MSECS.
added G_SLICE_CONFIG_COLOR_INCREMENT to test different color increments
(mainly 0 and 1). reduced the minimum block size to 128 bytes, to
minimize wastage if small amounts of differently sized structrues are
allocated, this does come at a performance cost of roughly 5% though.
fixed up block alignment calculation, so it works for varying
block sizes. only use strerror() not g_strerror() since the latter
depends on working GQuark and GSlice.
mem_error(): implemented in terms of fprintf and vfprintf.
* tests/slice-color.c: new program to test cache colorization effects.
* tests/slice-test.c: trade G_SLICE_CONFIG_ALWAYS_FREE for 0 duration
G_SLICE_CONFIG_WORKING_SET_MSECS.
* glib/gasyncqueue.c:
- Call g_queue_insert_sorted() instead of duplicating the code.
- Call g_queue_sort() instead of duplicating the code.
- Invert sort function results to make sure the same sort function
gives the same results across glist, gslist, gqueue and
gasyncqueue.
* tests/asyncqueue-test.c:
- Updated the sort function to reflect the example in the
documentation for gasyncqueue.c.
2005-12-05 Matthias Clasen <mclasen@redhat.com>
* tests/Makefile.am (TESTS_ENVIRONMENT):
* tests/gobject/Makefile.am (TESTS_ENVIRONMENT): Set
MALLOC_CHECK_ and MALLOC_PERTURB_
* tests/run-collate-tests.sh: Run the collation tests explicitly
in en_US locale. (#320463)
* docs/reference/glib/glib-sections.txt:
* glib/gasyncqueue.[ch]:
- Added support for sorting async queues by with _push_sorted(),
_push_sorted_unlocked(), _sort() and _sort_unlocked() (#323047).
* tests/Makefile.am:
* tests/asyncqueue-test.c:
- Added test case for gasyncqueue.c
2005-12-05 Matthias Clasen <mclasen@redhat.com>
* tests/libmoduletestplugin_a.c: Fix compiler warnings.
* glib/gatomic.c: In the ia64 implementation, use
__sync builtin without _si or _di suffix. (#321229,
Stanislav Brabec, patch by Andreas Schwab)
Fri Dec 2 10:55:07 2005 Tim Janik <timj@imendio.com>
* tests/slice-test.c: extended to perform the benchmarking on the old
memchunk code if 'O' is selected.
* tests/memchunks.c: new file which contains the old GLib mem chunks
implementation with prefix old_mem_chunk_.
* tests/Makefile.am: added memchunks.c
Thu Dec 1 17:32:46 2005 Tim Janik <timj@imendio.com>
* glib/gslice.[hc]: new slice allocator implementation.
* tests/slice-test.c: added random slice allocation test.
* glib/gthread.[hc]: removed newly added private thread mem API.
* glib/gthreadinit.h:
* glib/gmessages.c:
* glib/gthread.c:
* glib/gmem.c: divided glib threading initialisation into three phases,
initialisation where private keys and messaging are not available (only
needed by gmem.c), initialisation without messaging but private keys
available (gslice.c, gmessage.c), and full fledged initialisers that
server the rest of glib. initialisation functions got renamed to reflect
the limitations of their corresponding phases.
* glib/gmem.c: removed memchunk code, defer allocations to
g_slice_* instead.
* glib/gmem.[hc]: removed g_slice_* skeletons.
* glib/glib.symbols: added g_slice_* symbols.
* configure.in: check for availability of posix_memalign(3), memalign(3)
and valloc(3).
* glib/Makefile.am: added gslice.[hc].
2005-11-17 Matthias Clasen <mclasen@redhat.com>
* tests/Makefile.am:
* tests/utf8-pointer.c: Unit tests for g_utf8_pointer_to_offset
and g_utf8_offset_to_pointer.
* glib/gutf8.c (g_utf8_pointer_to_offset)
(g_utf8_offset_to_pointer): Handle negative offsets, and use
"stutter stepping" for going backwards. (#320638, Larry
Ewing)
2005-10-29 Matthias Clasen <mclasen@redhat.com>
* tests/convert-test.c: Add some tests for conversions between
UTF-8, UCS-4 and UTF-16.
* glib/gutf8.c (g_utf8_to_ucs4, g_utf8_to_utf16): Fix handling
of len == -1, noticed by Morten Welinder.
2005-10-05 Matthias Clasen <mclasen@redhat.com>
* Makefile.am: Add Collation tests.
* tests/collate/*: Inputs and expected outputs for collation tests.
* tests/run-collate-tests.sh: Script to run collation tests.
* tests/unicode-collate.c (main): Rework slightly to make
it usable in unit tests. Also test g_utf8_collate_key_for_filename().
2005-10-01 Behdad Esfahbod <behdad@gnome.org>
* docs/reference/glib/tmpl/unicode.sgml:
* glib/gen-unicode-tables.pl:
* glib/gunibreak.h:
* glib/gunichartables.h:
* glib/gunicode.h:
* tests/casefold.txt:
* tests/casemap.txt: Updated to Unicode 4.1. There are five new
GUnicodeBreakType types. That may break some applications, like
Pango <= 1.10.
Tue Sep 20 13:16:04 2005 Tim Janik <timj@imendio.com>
* glib/gpattern.c (g_pattern_ph_match): applied significant recursion
complexity optimization, based on a patch from Matthias Clasen.
* tests/patterntest.c: more tests, mostly from matthias.
Mon Sep 19 17:23:23 2005 Tim Janik <timj@imendio.com>
* glib/gpattern.c: applied a patch from matthias which checks on the
upper bound of GPatternSpec length to optimize matches.
cosmetic fixups.
* tests/patterntest.c: added more match cases.
2005-09-14 Matthias Clasen <mclasen@redhat.com>
* tests/keyfile-test.c: Add a test for grup names of length 1.
* glib/gkeyfile.c (g_key_file_line_is_group): Accept group names
of length 1. (#316309)
2005-09-11 Sebastian Wilhelmi <seppi@seppi.de>
* tests/refcount/Makefile.am (INCLUDES): Link the the refcount
tests to the system thread library $(G_THREAD_LIBS). Fixes#313744
and #314217.
2005-08-09 Matthias Clasen <mclasen@redhat.com>
* tests/gobject/Makefile.am (test_programs): Add it here.
* tests/gobject/gvalue-test.c: Beginning of a test suite
for GValue.
2005-08-08 Matthias Clasen <mclasen@redhat.com>
* tests/convert-test.c: Enable the endianness test.
* glib/gconvert.c: Make the caching of iconv descriptors
optional.
* configure.in: Add an --enable-iconv-cache option, and
default to disabling iconv caching on new enough glibc.
Somebody with access to Solaris systems will need to test
if opening/closing of iconv descriptors is enough of
a performance problem to warrant the caching on that
platform. Note that the caching is causing correctness
problems in some corner cases, thus turning it off
is desirable unless it has severe performance implications.
2005-08-08 Matthias Clasen <mclasen@redhat.com>
* tests/Makefile.am: Add convert-test here.
* tests/convert-test.c: Add the beginning of a testsuite
for g_convert() and friends.
2005-08-02 Tor Lillqvist <tml@novell.com>
* tests/refcount/objects.c
* tests/refcount/properties.c
* tests/refcount/signals.c: Use g_usleep() instead of sleep() for
portability.
Mon Aug 1 23:33:47 2005 Tim Janik <timj@imendio.com>
* tests/refcount/closures.c: test high contention on closure
reference counts to trigger and catch non-atomic updates.
* tests/refcount/objects.c:
* tests/refcount/objects2.c:
* tests/refcount/properties.c:
* tests/refcount/properties2.c:
* tests/refcount/signals.c:
fixed up test and threading fundamentals. variables accessed from all
threads need to be volatile. context switches are enforced by using
g_thread_yield(), not g_usleep(1) which may result in busy waits on
some platforms. for testcode, always consider all warnings and
critical messages fatal. issue the currently running program on
stdout. improved progress indicators.
* tests/refcount/properties.c:
* tests/refcount/objects.c:
don't overdo the number of testing threads to keep the testing machine
usable, 2 threads can produce as much contention as 20 if executing the
same code.
* tests/refcount/signals.c: only start 1 thread per object. GObject
doesn't provide mutually exclusive object access, but only mutually
exclusive reference count modification.
* tests/Makefile.am: added closures test.
2005-08-01 Tor Lillqvist <tml@novell.com>
* tests/uri-test.c: Make it pass on Win32.
(from_uri_tests[]): Take into consideration that on Win32 we don't
return "localhost" hostnames.
(safe_strcmp_filename): New function that considers slash and
backslash equal on Win32.
(run_roundtrip_tests): Use safe_strcmp_filename().
2005-07-20 Matthias Clasen <mclasen@redhat.com>
* glib/gthreadpool.c (g_thread_pool_free): Don't get
stuck in here if immediate is TRUE. (#310954,
Hong Jen Yee)
* tests/threadpool-test.c (main): Test immediate == TRUE.
2005-07-15 Matthias Clasen <mclasen@redhat.com>
Make refcounting threadsafe by using atomic
operations. (#166020, Wim Taymans)
* gobject.c: Use a recursive lock to protect the
notify queue.
(g_object_unref): Get rid of g_object_last_unref and
do the last unref handling in g_object_unref.
(g_object_ref, g_object_unref): Use atomic operations.
* gsignal.c (struct _HandlerMatch): Use a full integer
for the ref_count field.
(handler_ref, handler_unref_R): Use atomic operations.
* gparam.c (g_param_spec_ref, g_param_spec_unref):
Use atomic operations instead of a lock to make the
refcounting threadsafe.
* gclosure.c (g_closure_ref, g_closure_unref): Use atomic
operations. This is more complicated here, since the
refcount is stored in a bitfield, so we also have
to access all other bitfield members atomically.
* gsignal.c (handlers_find): Read the meta_marshal flag
of the closure atomically.
* tests/Makefile.am (SUBDIRS): Add tests/refcount
* configure.in: Add tests/refcount
* tests/refcount/properties.c: Test property changes
from multiple threads.
* tests/refcount/signals.c: Test signal emission from
multiple threads.
* tests/refcount/objects.c: Test refcounting from
multiple threads.
* tests/refcount/objects2.c:
* tests/refcount/properties2.c: Tests to measure the
overhead of threadsafe refcounting.
* glib/giochannel.c (g_io_channel_ref, g_io_channel_unref):
Use atomic operations to make refcounting
threadsafe. (#166020, Wim Taymans)
2005-07-12 Matthias Clasen <mclasen@redhat.com>
* glib/goption.h (G_OPTION_FLAG_NOALIAS):
* glib/goption.c: Add and implement a new flag
to turn off the automatic <groupname>- prefixing
for conflict resolution of long option names. (#171840,
Adam McLaurin)
All optional callback arguments (#308886, Pawel
Sliwowski)
* glib/goption.h (G_OPTION_FLAG_OPTIONAL_ARG):
* glib/goption.c: Add and implement a new flag
to indicate that a callback *optionally* takes another
argument.
* tests/option-test.c: Add tests for optional arguments.
2005-07-01 Matthias Clasen <mclasen@redhat.com>
* glib/gkeyfile.c (g_key_file_get_key_comment):
(g_key_file_get_top_comment): Don't reverse the order of multiline
comments.
(g_key_file_get_group_comment): Actually get the group comment.
* tests/keyfile-test.c (test_comments): Test that comments are
handled properly. (#309263, Mikael Magnusson)
2005-07-01 Matthias Clasen <mclasen@redhat.com>
* tests/keyfile-test.c (test_comments): Test that comments are
handled properly. (#309263, Mikael Magnusson)
2005-06-26 Tor Lillqvist <tml@novell.com>
* glib/Makefile.am: libtool installs/uninstalls the import
library, no need to do it ourselves. Do still install/uninstall
the .def file, though.
* glib/gmappedfile.c: Add Win32 implementation.
(g_mapped_file_free): Don't mention writable shared mappings in
the doc comment. Free the GMappedFile struct.
* tests/mapping-test.c (main): No kill() or SIGUSR1 on Win32, use
a flag file instead to stop the child. Use g_usleep() instead of
sleep().
2005-06-24 Matthias Clasen <mclasen@redhat.com>
Add an mmap() wrapper called GMappedFile. (#148218,
David Schleef, Behdad Esfahbod)
* glib/gmappedfile.[hc]: New files.
* configure.in: Check for mmap.
* glib/Makefile.am: Add new files.
* glib/glib.symbols: Add new functions.
* glib/glib.h: Include gmappedfile.h
* tests/mapping-test.c: Tests for GMappedFile.
* tests/Makefile.am: Add new file.
2005-06-22 Tor Lillqvist <tml@novell.com>
* glib/gfileutils.c (g_makepath): New function. Creates a
directory including intermediate parent directories as
needed. (#60509)
* glib/gfileutils.h: Declare it.
* glib/glib.symbols: Add it.
* tests/testglib.c: Test it.
2005-06-22 Tor Lillqvist <tml@novell.com>
* glib/gutils.c (g_get_host_name): New function. Returns the
machine's name, or one of its names. Document that it is
best-effort only, and not guaranteed to be unique or anything.
(g_get_any_init): Get the host name here. On Unix use
gethostname(), on Windows use GetComputerName(). (#5200)
* glib/gutils.h
* glib/glib.symbols: Add here, too.
* tests/testglib.c: Test it.
2005-06-18 Matthias Clasen <mclasen@redhat.com>
* glib/goption.h:
* glib/goption.c: Add G_OPTION_FLAG_NO_ARG and
G_OPTION_FLAG_FILENAME to allow greater control of
G_OPTION_ARG_CALLBACK options. (#302632, Dan Winship)
* tests/option-test.c: test callback args
2005-05-27 Matthias Clasen <mclasen@redhat.com>
* glib/goption.c (parse_short_option, parse_long_option):
Return an error if an option is missing its argument. (#305576,
Björn Lindqvist)
* tests/option-test.c (missing_arg_test): Add a testcase.
2005-05-17 Matthias Clasen <mclasen@redhat.com>
* tests/tree-test.c (main): Check the return values of
g_tree_remove().
* glib/gtree.c (g_tree_remove, g_tree_steal): Return
a boolean indicating wether the key was found. (#302545,
Matthew F. Barnes)
2005-05-06 Matthias Clasen <mclasen@redhat.com>
* tests/option-test.c: Add a testcase.
* glib/goption.c (g_option_context_parse): Treat '-'
on its own as a non-option argument. (#168008, Tim Musson,
Thomas Leonard and others)
2005-05-05 Owen Taylor <otaylor@redhat.com>
* gobject.[ch] gobject.symbols: Add
g_object_add/remove_toggle_ref() functions to get notification
when a reference count is the last remaining reference; this
enables better memory management for language bindings.
(http://mail.gnome.org/archives/gtk-devel-list/2005-April/msg00095.html)
2005-05-05 Owen Taylor <otaylor@redhat.com>
* glib/gdataset.[ch] glib/gdatasetprivate.h: Add
g_datalist_set/unset_flags(), g_datalist_get_flags() functions
to squeeze some bits into a GDataSet... this is needed for
efficient implementation of toggle references in GObject.
* tests/gobject/references.c tests/gobject/Makefile.am:
Add a test case for weak and toggle references.
* glib/gfileutils.[ch]: Rename g_file_replace() back
to g_file_set_contents().
* glib/glib.symbols: Update.
2005-05-05 Owen Taylor <otaylor@redhat.com>
* glib/Makefile.am glib/glib-sections.txt gobject/gobject-sections.txt:
Update
* gobject/tmpl/objects.sgml: Document toggle-references.
2005-03-20 Tor Lillqvist <tml@novell.com>
* tests/testglib.c (main): Print more detailled output from the
timer tests. Don't print home directory twice. Test
g_win32_error_message().
* tests/spawn-test.c (run_tests): On Win32, run netstat instead of
ipconfig. On Windows XP collecting output from ipconfig doesn't
seem to work for some reason.
2005-03-10 Sven Neumann <sven@gimp.org>
* glib/gfileutils.c (get_contents_stdio): delay memory allocation
until after the first read. Saves a bunch of reallocs. Also
increased the buffer size to 4096 bytes. (bug #165954)
* tests/file-test.c (test_get_contents): added a (very basic) test
for g_file_get_contents().
2005-02-23 Matthias Clasen <mclasen@redhat.com>
* tests/keyfile-test.c (test_locale_string): Set LANGUAGE
instead of LC_ALL to shield against LANGUAGE being set in
the environment. (#168311, Suren A. Chilingaryan)
2005-02-08 Matthias Clasen <mclasen@redhat.com>
* glib/gkeyfile.c (g_key_file_parse_value_as_string): Don't
write out of bounds.
* glib/goption.c (g_option_context_parse): Fix a
one-too-short memory allocation. (#166609, Nicolas Laurent)
* tests/Makefile.am (TESTS_ENVIRONMENT): Add tests with
MALLOC_CHECK_.
* tests/option-test.c: Add a test for unkown short options.
2005-02-01 Matthias Clasen <mclasen@redhat.com>
* tests/keyfile-test.c (test_key_remove): Add test case for
key removal.
* glib/gkeyfile.c (g_key_file_remove_key): Actually remove
the key from the list of pairs. (#165980, David Hoover)
2005-02-01 Matthias Clasen <mclasen@redhat.com>
* tests/keyfile-test.c (test_group_remove): Add test case for
group removal.
* glib/gkeyfile.c (g_key_file_remove_group): Don't segfault
if the group doesn't exist. (#165887, Mathias Hasselmann)
2005-01-24 Matthias Clasen <mclasen@redhat.com>
* tests/markups/fail-40.gmarkup: Add a test with a long entity
name.
* glib/gmarkup.c (unescape_text_state_inside_entity_name): Don't
copy the entity name into a short buffer of fixed length. Instead,
compare it in place with strncmp(), and do a full strdup() in the
error path. (#165100, Simon Budig)
2005-01-20 Matthias Clasen <mclasen@redhat.com>
* glib/gkeyfile.c (g_key_file_parse_value_as_integer): Don't
interpret leading zeros as octal. The specification requires
%f parsing, and %f doesn't allow octal.
* tests/keyfile-test.c: Add some more tests.
2005-01-20 Matthias Clasen <mclasen@redhat.com>
* tests/keyfile-test.c: Add some more tests.
* glib/gkeyfile.c (g_key_file_get_keys): Return keys in
the order found in the file, rather than the opposite.
(g_key_file_parse_value_as_string): Fix error reporting.
2005-01-19 Matthias Clasen <mclasen@redhat.com>
* glib/gkeyfile.c (g_key_file_parse_data): Accept \r\n as
line end. (#163030, Bastian Nocera)
(g_key_file_load_from_data): Make -1 work as a size.
* tests/keyfile-test.c: Some unit tests for the keyfile
parser.
* tests/Makefile.am (test_programs): Add keyfile-test.
2004-12-20 Matthias Clasen <mclasen@redhat.com>
* tests/option-test.c: Add some tests for '--'
stripping.
* glib/goption.c (g_option_context_parse): Don't
strip '--' if it would be needed by a second option
parser. (#161701)
Sun Nov 28 13:13:56 2004 Manish Singh <yosh@gimp.org>
* glib/abicheck.sh: filter G_GNUC before PRIVATE so $ is still true.
* tests/utf8-validate.c: cast pointer math to gint for error print
message.
2004-11-25 Matthias Clasen <mclasen@redhat.com>
* tests/strtod-test.c (main): Add a testcase for the previous fix.
* glib/gstrfuncs.c (g_ascii_strtod): Make it work again for floats
starting with a decimal point, like .75 (#156421, Hans Breuer)
