This extension point allow extending GLib with library like LibProxy that
interprets system proxy settings and finds the appropriate configuration
based on the type of connection being made.
Reviewed-by: Dan Winship <danw@gnome.org>
Add GZlibCompressor:file-info property. If it contains a non-NULL
GFileInfo, and the compressor is in GZIP mode, the filename and
modification time from the file info are written to the GZIP header
in the output data.
Add GZlibDeompressor:file-info property. If the decompressor is in GZIP
mode, and the GZIP data contains a GZIP header, the filename and
modification time are read from it, stored in a GFileInfo, and the
file-info property is notified.
Bug #617691.
If sending a lot of data and/or the other peer is not reading it, then
socket buffers can overflow. This is communicated from the kernel by
returning EAGAIN. In GIO, it is modelled by g_output_stream_write()
and g_socket_send_message() returning G_IO_ERROR_WOULD_BLOCK.
It is also problematic that that we're using synchronous IO in the
shared GDBus IO thread. It means that one GDBusConnection can lock up
others.
It turns out that by porting from g_output_stream_write() to
g_output_stream_write_async() we fix the EAGAIN issue. For GSocket, we
still need to handle things manually (by creating a GSource) as
g_socket_send_message() is used.
We check the new behavior in Michael's producer/consumer test case (at
/gdbus/overflow in gdbus-peer.c) added in the last commit.
Also add a test case that sends and receives a 20 MiB message.
Also add a new `transport' G_DBUS_DEBUG option so it is easy to
inspect partial writes:
$ G_DBUS_DEBUG=transport ./gdbus-connection -p /gdbus/connection/large_message
[...]
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 0 on a GSocketOutputStream
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 128000 on a GSocketOutputStream
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 256000 on a GSocketOutputStream
[...]
========================================================================
GDBus-debug:Transport:
>>>> WROTE 43669 bytes of message with serial 4 and
size 20971669 from offset 20928000 on a GSocketOutputStream
[...]
========================================================================
GDBus-debug:Transport:
<<<< READ 16 bytes of message with serial 3 and
size 20971620 to offset 0 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 15984 bytes of message with serial 3 and
size 20971620 to offset 16 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 16000 bytes of message with serial 3 and
size 20971620 to offset 16000 from a GSocketInputStream
[...]
========================================================================
GDBus-debug:Transport:
<<<< READ 144000 bytes of message with serial 3 and
size 20971620 to offset 20720000 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 107620 bytes of message with serial 3 and
size 20971620 to offset 20864000 from a GSocketInputStream
OK
https://bugzilla.gnome.org/show_bug.cgi?id=626748
Signed-off-by: David Zeuthen <davidz@redhat.com>
Previously if a GSocketConnection had a blocking GSocket, it would
sometimes block during asynchonous I/O, and if it had a non-blocking
socket, it would sometimes return G_IO_ERROR_WOULD_BLOCK from
synchronous I/O. This fixes the connection to not depend on the socket
state.
https://bugzilla.gnome.org/show_bug.cgi?id=616458
This prints all GDBusMethodInvocation API usage and is normally used
with the `incoming' option. Example:
# G_DBUS_DEBUG=incoming,return ./polkitd --replace
Entering main event loop
Connected to the system bus
Registering null backend at priority -10
[...]
Acquired the name org.freedesktop.PolicyKit1
[...]
========================================================================
GDBus-debug:Incoming:
<<<< METHOD INVOCATION org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
invoked by name :1.26
serial 299
========================================================================
GDBus-debug:Return:
>>>> METHOD ERROR org.freedesktop.PolicyKit1.Error.Failed
message `Cannot determine session the caller is in'
in response to org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
to name :1.26
reply-serial 299
[...]
========================================================================
GDBus-debug:Incoming:
<<<< METHOD INVOCATION org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
invoked by name :1.2402
serial 25
========================================================================
GDBus-debug:Return:
>>>> METHOD RETURN
in response to org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
to name :1.2402
reply-serial 25
Signed-off-by: David Zeuthen <davidz@redhat.com>
Also use this in the test cases to check that serialization to and
from both big and little endian works.
Signed-off-by: David Zeuthen <davidz@redhat.com>
- Make GCredentials instance and class structures private so it can't
be subclassed and we don't have to worry about ABI compat
issues. This also allows us to get rid of the GCredentialsPrivate
struct.
- Add a GCredentialsType enumeration that is used whenever exchanging
pointers with the user. This allows us to support OSes with
multiple native credential types. In particular, it allows
supporting OSes where the native credential evolves or even changes
over time.
- Add g_socket_get_credentials() method.
- Add tests for g_socket_get_credentials(). Right now this is in the
GDBus peer-to-peer test case but we can change that later.
- Move GTcpConnection into a separate gtk-doc page as was already
half-done with GUnixConnection. Also finish the GUnixConnection
move and ensure send_credentials() and receive_credentials()
methods are in the docs. Also nuke comment about GTcpConnection
being empty compared to its superclass.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is currently unused but might be useful in the future. For
example, it might be nice with a way to bypass the current queue of
outgoing messages - having a flag enumeration allows us to add a
G_DBUS_SEND_MESSAGE_FLAGS_BYPASS_QUEUE etc. etc.
This commit breaks ABI and API. Users of the (rarely used) API to send
messages will have to port to this new API.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is currently unused but will probably be useful in the
future. For example, we could have a _ARG0_IS_PATH to specify that
arg0 should be used for arg0path.
This commit breaks API and ABI. Users of
g_dbus_connection_signal_subscribe() will need to port to this new
version.
Signed-off-by: David Zeuthen <davidz@redhat.com>
... so it is async, cancelable and returns an error. Also provide a
synchronous version.
This is an API/ABI break but it is expected that only very few
applications use this API.
Signed-off-by: David Zeuthen <davidz@redhat.com>
E.g. move these C structures out of public header files and into their
respective C files. Also nuke padding since this is no longer needed.
This leaves only GDBusProxy as an extendable type.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Also add a 'address' G_DBUS_DEBUG option that will print out useful
debug information such as
GDBus-debug:Address: In g_dbus_address_get_for_bus_sync() for bus type `session'
GDBus-debug:Address: env var DBUS_SESSION_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_SYSTEM_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_STARTER_BUS_TYPE is not set
GDBus-debug:Address: Running `dbus-launch --autolaunch=05e508961149264c9b750a4c494aa6f7 --binary-syntax --close-stderr' to get bus address (possibly autolaunching)
GDBus-debug:Address: dbus-launch output:
0000: 75 6e 69 78 3a 61 62 73 74 72 61 63 74 3d 2f 74 unix:abstract=/t
0010: 6d 70 2f 64 62 75 73 2d 77 42 41 6f 4b 59 49 52 mp/dbus-wBAoKYIR
0020: 7a 75 2c 67 75 69 64 3d 30 34 30 64 31 33 66 33 zu,guid=040d13f3
0030: 30 61 30 62 35 32 63 32 30 66 36 32 63 34 31 63 0a0b52c20f62c41c
0040: 30 30 30 30 35 30 38 64 00 d2 38 00 00 01 00 40 0000508d..8....@
0050: 05 00 00 00 00 .....
GDBus-debug:Address: dbus-launch stderr output:
14542: Autolaunch enabled (using X11).
14542: --exit-with-session automatically enabled
14542: Connected to X11 display ':0.0'
14542: === Parent dbus-launch continues
14542: Waiting for babysitter's intermediate parent
14542: Reading address from bus
14542: Reading PID from daemon
14542: Saving x11 address
14542: Created window 88080385
14542: session file: /root/.dbus/session-bus/05e508961149264c9b750a4c494aa6f7-0
14542: dbus-launch exiting
GDBus-debug:Address: Returning address `unix:abstract=/tmp/dbus-wBAoKYIRzu,guid=040d13f30a0b52c20f62c41c0000508d' for bus type `session'
and
GDBus-debug:Address: In g_dbus_address_get_for_bus_sync() for bus type `session'
GDBus-debug:Address: env var DBUS_SESSION_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_SYSTEM_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_STARTER_BUS_TYPE is not set
GDBus-debug:Address: Running `dbus-launch --autolaunch=05e508961149264c9b750a4c494aa6f7 --binary-syntax --close-stderr' to get bus address (possibly autolaunching)
GDBus-debug:Address: dbus-launch output:
0000: 75 6e 69 78 3a 61 62 73 74 72 61 63 74 3d 2f 74 unix:abstract=/t
0010: 6d 70 2f 64 62 75 73 2d 77 42 41 6f 4b 59 49 52 mp/dbus-wBAoKYIR
0020: 7a 75 2c 67 75 69 64 3d 30 34 30 64 31 33 66 33 zu,guid=040d13f3
0030: 30 61 30 62 35 32 63 32 30 66 36 32 63 34 31 63 0a0b52c20f62c41c
0040: 30 30 30 30 35 30 38 64 00 d2 38 00 00 01 00 40 0000508d..8....@
0050: 05 00 00 00 00 .....
GDBus-debug:Address: dbus-launch stderr output:
14549: Autolaunch enabled (using X11).
14549: --exit-with-session automatically enabled
14549: Connected to X11 display ':0.0'
14549: dbus-daemon is already running. Returning existing parameters.
14549: dbus-launch exiting
GDBus-debug:Address: Returning address `unix:abstract=/tmp/dbus-wBAoKYIRzu,guid=040d13f30a0b52c20f62c41c0000508d' for bus type `session'
Note that things work exactly like libdbus, e.g. from the
dbus-launch(1) man page:
Whenever an autolaunch occurs, the application that had to start a
new bus will be in its own little world; it can effectively end up
starting a whole new session if it tries to use a lot of bus
services. This can be suboptimal or even totally broken, depending
on the app and what it tries to do.
[...]
You can always avoid autolaunch by manually setting
DBUS_SESSION_BUS_ADDRESS. Autolaunch happens because the default
address if none is set is "autolaunch:", so if any other address is
set there will be no autolaunch. You can however include autolaunch
in an explicit session bus address as a fallback, for example
DBUS_SESSION_BUS_ADDRESS="something:,autolaunch:" - in that case if
the first address doesn't work, processes will autolaunch. (The bus
address variable contains a comma-separated list of addresses to
try.)
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add a <flags> tag to the schema file format and a flags='' attribute to
go along with. Add some extra test cases for those.
Add new g_settings_{get,set}_flags() calls and support binding to
GParamSpecFlags properties. Add test cases.
This commit adds the following G_DBUS_DEBUG flags
- emission
- incoming
- call
- signal
- payload
https://bugzilla.gnome.org/show_bug.cgi?id=620913
Signed-off-by: David Zeuthen <davidz@redhat.com>
Without this guarantee, peer-to-peer connections are not very
useful. However, with this guarantee it's possible to export objects
in a handler for the GDBusServer::new-connection signal.
There are two caveats with this patch
- it won't work on message bus connections
- we don't queue up messages to be written
that can be addresses later if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=623142
Signed-off-by: David Zeuthen <davidz@redhat.com>
Having this tool in GLib is a bad idea for a number of reasons:
- experience has shown that the simple file format was a bad idea
- the tool is currently implemented with a hack that would require a
dependency inversion to solve (the tool needs to depend on Python
GVariant bindings)
- the tool itself is unmaintained
It will be moved to the GConf git repository so people can continue to
use it for the purpose of converting GConf schemas.
Allow constructing a GDBusProxy for well-known names as discussed here
http://mail.gnome.org/archives/gtk-devel-list/2009-October/msg00075.html
including test cases.
Make it possible to create a GDBusProxy for a GBusType instead of a
GDBusConnection. This requires G_BUS_TYPE_NONE so add that too.
Nuke g_bus_watch_proxy() since one can now more or less use GDBusProxy
for this.
Port gdbus-example-watch-proxy to this new API and include this
example in the GDBusProxy doc page.
Also nuke the GType parameter from the GDBusProxy constructors as
requested here: https://bugzilla.gnome.org/show_bug.cgi?id=621229
Also update the porting guide and other API docs for this change.
Also fix a bug in the signal dispatching code so each subscriber only
get notified once, not N times, for the same signal. Also add a test
case for this.
https://bugzilla.gnome.org/show_bug.cgi?id=621213
Signed-off-by: David Zeuthen <davidz@redhat.com>
accept more than one callback.
g_bus_own_name_with_closures
g_bus_own_name_on_connection_with_closures
g_bus_watch_name_with_closures
g_bus_watch_name_on_connection_with_closures
g_bus_watch_proxy_with_closures
g_bus_watch_proxy_on_connection_with_closures
https://bugzilla.gnome.org/show_bug.cgi?id=621092
This adds a GApplication object to GIO, which is the core of
an application support class, supporting
- uniqueness
- exporting actions (simple scripting)
- standard actions (quit, activate)
The implementation for Linux uses D-Bus, takes a name on the
session bus, and exports a org.gtk.Application interface.
Implementations for Win32 and OS X are still missing.
add GSimplePermission, a trivial const implementation of GPermission
can-request and can-release are always false for this implementation and
the value of 'allowed' is decided at construction.
Fixup for commit 133f66538d which
duplicated the contents of most of the migration documentation by
splitting it out into separate files but keeping the original file
intact (with a rename).
This removes the duplicated content from the renamed file.
This uncovered a bug in name watching if the name wasn't activatable.
Also provoked the need for on_connection variants of g_bus_watch_name
(added g_bus_watch_proxy's variant as well).
This makes it possible to use the cached properties mechanism even if
constructing the proxy with the DO_NOT_LOAD_PROPERTIES flag.
This is useful for cases where you obtain the and track object
properties out-of-band. For example, in udisks, the plan is to have
something like this
Manager.GetObjects (out ao paths, out aa{sa{sv}} all_properties);
Manager.ObjectAdded (o path, a{sa{sv}} all_properties);
Manager.ObjectChanged (o path, a{sa{sv}} all_properties);
Manager.ObjectRemoved (o path, a{sa{sv}} all_properties);
E.g. the first GetObjects() call will return *all* data about *all*
exported objects. Further, this way a client will only need to listen
these three signals (three AddMatch) on the Manager object and it will
never need to do GetAll() etc (e.g. can use DO_NOT_LOAD_PROPERTIES).
(Of course this only works if the client is interested in all
objects... while this is true for udisks it is generally not true for
other D-Bus services).
Also use expected_interface to check for programming errors.
Lots of people been suggesting this. We still use MethodInvocation /
method_invocation for handling incoming method calls so use call()
instead of invoke_method() helps to separate the client and server
facilities. Which is a good thing(tm).
There are apparently two incompatible ways of naming abstract sockets:
pad the sockaddr with 0s and use the entire thing as the name, or else
don't, and just pass a shorter length value to the relevant functions.
We previously only supported the former method. Add support for the
latter.
Also correctly handle "anonymous" unix sockaddrs (eg, the client side
of a connection, or a socketpair() socket), and add unix domain socket
support to the socket-client and socket-server test programs to make
sure this all works.
https://bugzilla.gnome.org/show_bug.cgi?id=615960
This patch only adds the function. The function is a NOP.
See the API documentation for a rationale.
Part of: Bug 591388 - number of GCancellables available is too limited
For details, see bug 587482. The new api:
- Provide new _with_operation() variants of all unmount and eject methods
- Add GMountOperation::show-processes signal
- this can be used to show processes blocking an unmount operation
- Deprecate all unmount and eject methods
- Add g_drive_can_start_degraded() method
- this is to avoid auto-starting degraded drives
- Make g_drive_stop() resp. g_file_stop_mountable() take a GMountOperation
- these ops were recently added and not yet public API so it's fine
to change how they work
- Provide a way to poll mountable files, e.g. g_file_poll_mountable()
- Add some missing file attributes for mountable files
- G_FILE_ATTRIBUTE_MOUNTABLE_UNIX_DEVICE_FILE
- needed for the GDU Nautilus extensions to format a volume
- G_FILE_ATTRIBUTE_MOUNTABLE_CAN_START_DEGRADED:
- mimics g_drive_can_start_degraded()
- G_FILE_ATTRIBUTE_MOUNTABLE_CAN_POLL:
- mimics g_drive_can_poll_for_media()
- G_FILE_ATTRIBUTE_MOUNTABLE_IS_MEDIA_CHECK_AUTOMATIC
- mimics g_drive_is_media_check_automatic()
Add API for starting/stopping drives. This new API will enable
GVolumeMonitor and GVfs implementations to add support for the
following features
1. Powering down external hard disk enclosures / drives
2. Starting/stopping multi-disk devices (such as RAID/btrfs/ZFS)
3. Connecting/disconnecting iSCSI devices
4. Reacting to the user pressing e.g. the "remove drive" button on
a IBM/Lenovo Ultrabay: http://www.thinkwiki.org/wiki/Ultrabay
See the bug for the corresponding GVfs and Nautilus changes.
