It’s not actually needed on any platform, and causes compilation
problems on platforms where it’s not available.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #3111
The Comment field provides a user-visible description of the app,
which usually contains generic words ("and", "or", "not", "is", ...)
that add noise when used for search.
It made some sense to match against the field as a fallback for
Keywords, before that key was well established. However that key
has been around for years now, so hopefully every app where additional
terms are helpful uses it by now.
With that, the downside of added noise outweighs the benefit, so
it's time to stop matching on comments.
When setting the file time using utimensat, don't ignore
microseconds for access/modify times. By doing that, they're preserved
when using g_file_info_set_modification_date_time and then setting the file's
attributes from it.
Fixes#3116
Commit 9e2ad88455 improved app search results by allowing to differentiate
their match_type: prefix match or substring match; while giving more priority
to prefix matches over substring matches, but only when they are in the same
match_category[1].
This was a step forward but, as outlined in #3082, still not enough to get
most relevant results first to the user, because apparently (and for the
specific case of desktop app searching) a prefix match in a lower category
is more relevant to the user than a substring match in a higher category.
So that's what this commit implements, i.e. it makes sure prefix matches
are still preferred over substring matches but this time not only when
in the same category but also across different categories.
[1] Match category is the Desktop file key where the match happened.
They are shown below from top to lesser priority.
DESKTOP_KEY_Name
DESKTOP_KEY_Exec
DESKTOP_KEY_Keywords
DESKTOP_KEY_GenericName
DESKTOP_KEY_X_GNOME_FullName
DESKTOP_KEY_Comment
Fixes#3082
· Add a usage output that is printed when called with no argument
or with '--help' argument. This is helpful as it avoids having
to read the source code to know how to run the different options.
· Adds new '--should-show-only' option to 'search' command, to
better mimick the gnome-shell app search, by not returning
apps with NoDisplay=true.
Example for running a desktop app search with the new option from
inside the GLib build dir:
$ gio/tests/apps search --should-show-only settings
The `GTK_USE_PORTAL` environment variable has started to be misused by
users, which is causing deployment issues (such as portal services
themselves ending up being forced to use portals, which is never going
to work).
Try and sidestep users’ broken configurations by renaming the
environment variable, and also separating it from the old GTK
environment variable, since the GLib one affects a lot more processes.
This environment variable is meant to be used for
debugging and development, and never in production.
GTK already renamed their environment variable in
https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/4829, so keeping the
`GTK_USE_PORTAL` name in GLib doesn’t make sense anyway.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #3107
We already validated that the required headers for each type of D-Bus
message were present. However, we didn’t validate that they contained a
variant of the right type. This could lead to functions like
`g_dbus_message_get_path()` returning `NULL` unexpectedly.
This failure could only be hit when using GDBus in peer-to-peer mode, or
with a D-Bus server which didn’t validate the headers itself. The
reference D-Bus server does validate the headers, and doesn’t forward
invalid messages to clients.
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
Fixes: #3061
Add test cases that result in lookup of the port via
getservbyname().
As the result depends on "/etc/services", it's not reliably the same on
every system. It requires a workaround.
Commit cf55c31170 added a new test which
uses `ptrace()` to check some `GSubprocess` behaviour. FreeBSD uses
different symbol names for ptrace symbols, and we haven’t tested whether
the test works (and reproduces the failure) on FreeBSD, so skip the test
for now.
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
The test case will fail with the
g_assert_false (g_subprocess_get_successful (proc));
assert failing. Without the fix, it'll hit sometimes, but rather
unreliably. When running `meson test --repeat 100`, it'll reproduce
anywhere between the first or much later, but mostly before the 20th
iteration on my system.
Helps: #3071
It's not safe to use setlocale() to mutate the locale in a threaded
program. Lots of other tests still do this, and I'm not putting in the
effort to fix them comprehensively in the absense of actual failures on
CI, but I figured it'd be good to fix the tests that I was touching.
This definitely does not do anything on Linux. I bet it's not needed on
other platforms, either. It's unsafe and may crash; there is no safe way
to mutate the environment in threaded programs.
This is a copy of the existing test_l10n, modified to use LC_TIME
instead of LC_MESSAGES. It's not safe as each call to g_setenv() or
setlocale() could cause the test to crash; there is no safe way to
change a threaded process's environment, and a threaded process's locale
can only be safely changed using uselocale(), not with setlocale().
The calls to g_setenv() are definitely not needed on Linux. I wonder
whether removing these will break the test on other platforms?
The calls to setlocale() should be replaced by a dance of
uselocale() -> duplocale() -> newlocale() -> uselocale() on Linux. But
this is not portable and this is a cross-platform test. We would have to
make the test platform-specific to do this. macOS and at least FreeBSD
provide these functions via xlocale.h, but this isn't portable.
The test was passing fine when `bindir` was equal to `multiarch_bindir`,
but not when they differ.
For example, on a Debian system, `gio-querymodules` is installed to
`/usr/lib/x86_64-linux-gnu/glib-2.0/gio-querymodules` rather than
`/usr/bin/gio-querymodules` as it is on (say) Fedora.
This was causing the pkg-config tests to fail on Debian.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #3045
This reverts commit 004f48f4fc.
Per the discussion on #3356, this change was prompted by a
misunderstanding of ldflags/link_args, and it resulted in various other
packages using glib no longer getting symbols exported. This commit
restores the glib 2.76 behaviour.
Avoid generating more code than needed, so other than continuing using
the generic glib marshallers when possible, define once the custom ones
we need for each file we generate.
The marshallers are then re-used across all the interfaces defined
without duplicating the code size.
This is the same we're doing in code generated by glib-genmarshaller and
what gmarshal does internally.
Since the generated gdbus C code can be considered private too, this is
safe to do, and will allow faster access to GValue objects.
Get rid completely of the usage of the generic marshaller in gdbus
generated code, using instead specific marshallers.
Code is not yet optimized fully since we may still have duplicated
functions to be generated.
Closes: https://gitlab.gnome.org/GNOME/glib/-/issues/3028
We relied on g_cclosure_marshal_generic() to easily generate signal
marshallers, but this relies on inspecting each parameter type with ffi
and this implies a performance hit, other than breaking the stack-frame
unwinder used by Linux perf and so by sysprof.
Given that we know the types we work on, it's easy enough to generate
the marshallers ourself.
Helps with: https://gitlab.gnome.org/GNOME/glib/-/issues/3028
When the gnome test runner executes the tests, the test appear to execute in disk
order. This means it sometimes works and sometimes we see breakage in portal-support-snap
and portal-support-snap-classic.
The issue is that some tests create config files but some don't. If they run
in the wrong order, tests see config files they shouldn't and break.
Fix this by deleting the files after each test run, properly cleaning up after
themselves. The cleanup code is based upon gtestutils.c:rm_rf().
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we have a convenience method to add actions let's allow to remove
them just as easily. This makes resource cleanup as simple as initially
adding the entries.
