This will make it clear what the bigger changes are between versions.
Kind of like a `NEWS` file for the specification.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This should clarify object paths and signatures a little, if anyone
needs that. This introduces no semantic changes.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
reStructuredText doesn’t support cross-references unless always built
with Sphinx (as I understand it). `rst2html5` doesn‘t support them.
So reword this (currently manual) cross-reference so it’s less awkward.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
I believe the specification was originally a shorter extract of
Allison’s thesis. This left a few dangling references to requirements
which were listed in a part of the thesis not included in the
specification.
Reword them slightly so they’re not quite so awkward.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The licensing for the original GVariant specification was not specified
in the original PDF.
However, CC-BY-SA-3.0 has been agreed by Allison, the sole copyright
holder, here:
https://gitlab.gnome.org/Teams/documentation/developer-www/-/merge_requests/108/#note_1586866
The diagrams were redrawn by me, so their licensing/copyright status is
clear.
Tested with `reuse lint` to ensure the data is machine-readable.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This is a verbatim conversion of the GVariant Specification from
https://people.gnome.org/~desrt/gvariant-serialisation.pdf /
https://raw.githubusercontent.com/ostreedev/gvariant-rs/master/docs/gvariant-serialisation.pdf
to reStructuredText.
This is for several reasons:
1. The canonical copy has gone offline due to people.gnome.org being
shut down.
2. GLib is the reference implementation of GVariant, so should probably
host the specification (unless someone wants to host it on
freedesktop-specs).
3. Moving it out of a PDF and into reStructuredText should allow for
amendments. The specification has a few problems, typos and
oversights in its original form, and it would be good to canonically
fix them without having to write a separate addendum document.
This conversion is verbatim, and does not change the content of the
document at all, even to fix typos and broken links (which there are a
small number of in the PDF).
This describes what I’m labelling as version 1.0 of the GVariant
serialisation format. Updates to the specification can bump this version
number, in subsequent commits.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Similar to g_source_set_static_name, this avoids
strdup overhead for debug-only information in
possibly hot code paths.
We also add a macro wrapper for g_task_set_name that
uses __builtin_constant_p to decide whether to use
g_task_set_name or g_task_set_static_name.
Given that it can be computed using an error-prone strings comparisons it
is better to provide a variable everywhere, so that we don't have the
risk of comparing values that are always false.
Inspired by libglnx's glnx_close_fd() and glnx_autofd, these let us
have the same patterns as g_clear_object() and g_autoptr(GObject), but
for file descriptors. g_clear_fd() is cross-platform, while g_autofd
is syntactic sugar requiring a supported compiler (gcc or clang).
Now that g_close() checks for EBADF as a programming error, we can
implement the equivalent of glnx_autofd as an inline function without
needing to have errno and EBADF in the header file.
g_clear_fd() is like glnx_close_fd(), but with error checking.
The private _g_clear_fd_ignore_error() function used to implement
g_autofd is a closer equivalent of glnx_close_fd().
Signed-off-by: Simon McVittie <smcv@collabora.com>
GBookmarkFile has everything for being introspectable, but it lacks a
GType, because it can't be copied. So provide a copy function that
deeply copies all the bookmark structures.
Add tests for this.
This is like our other suite of g_set_*() based APIs to simplify and
improve correctness of setters for fields, properties, and more.
This implementation specifically handles setting string values that may
point to an offset within the current string by copying before free.
strcmp() is used directly (as opposed to g_strcmp0() due to it being in
gtestutils.h as well as to increase the chance that the compiler will
hoist the implementation.
Fixes#2747
There is currently no `dllimport` attribute on any of our function,
which prevents MSVC to optimize function calls.
To fix that issue, we need to redeclare all our visibility macros for
each of our libraries, because when compiling e.g. GIO code, we need
dllimport in GLIB headers and dllexport in GIO headers. That means they
cannot use the same GLIB_AVAILABLE_* macro.
Since that's a lot of boilerplate to copy/paste after each version bump,
this MR generate all those macros using a python script.
Also simplify the meson side by using `gnu_symbol_visibility : 'hidden'`
keyword argument instead of passing the cflag manually.
This leaves only API index to add manually into glib-docs.xml when
bumping GLib version. That file cannot be generated because Meson does
not allow passing a buit file to gnome.gtkdoc()'s main_xml kwarg
unfortunately.
Building the references requires libraries with all their symbols
available. Passing `-Dgtk_doc=true` and `-Ddefault_library=static`
should be considered a configuration error.
glib_debug is an auto option. This is clever because it allows us to
guess the best default based on the build type, while also allowing an
easy way to override if the guess is not good. Sadly, the attempt to
guess based on the build type does not work well. For example, it
considers debugoptimized builds to be debug builds, but despite the
name, it is definitely a release build type (except on Windows, which
we'll ignore here). The minsize build type has the exact same problem.
The debug option is true for both build types, but this only controls
whether debuginfo is enabled, not whether debug extras are enabled.
The plain build type has a different problem: debug is off, but the
optimization option is off too, even though plain builds are distro
builds are will almost always use optimization.
I've outlined an argument for why we should make these changes here:
https://blogs.gnome.org/mcatanzaro/2022/07/15/best-practices-for-build-options/
Specifically, Rule 4 shows all the build types and whether they
correspond to release builds or debug builds. Rule 6 argues that we
should provide good defaults for plain builds.
We had gcc-only implementations for them while both can be used in all
the supported platforms we have.
So let's just provide generic definitions, while we keep the old ones
for both consistency and retro-compatibility.
We should mention glib-mkenums in the documentation for
G_DEFINE_ENUM_TYPE and G_DEFINE_FLAGS_TYPE.
We should also mention the macros in the documentation for glib-mkenums.
This way, developers can choose the most appropriate tool for their use
case.
We have fallback in places for GNU's variadic arguments in macros, and
for static inline functions with variadic arguments as an fallback of
last resort, but going forward we are going to depend on `__VA_ARGS__`
for macros that cannot be re-implemented using a static inline function.
Fixes: #2681
Atomic primitives allow to do conditional compare and exchange but also
to get the value that was previously stored in the atomic variable.
Now, we provided an exchange function that allows to do an exchange if
the atomic value matches an expected value but we had no way to know
at the same time what was the value in the atomic at the moment of the
exchange try, an this can be useful in case that the operation fails,
for example if the current value is still acceptable for us, allowing
to do a kind of "OR" check:
gint old_value;
gint valid_value = 222;
while (!g_atomic_pointer_compare_and_exchange_value (&atomic,
valid_value, 555,
&old_value)
{
if (old_value == 555 || old_value == 222)
valid_value = old_value;
}
While it's possible to create a directory synchronously via
g_dir_make_tmp(), there's no such API that performs it asynchronously.
So implement it using GFile, using a thread to perform such task.
Listing a user in `glib.doap` is important for ensuring their access
rights are correct in GitLab (as they are synced from the DOAP file by a
sysadmin script).
When `CODEOWNERS` was written, we were assuming that GNOME’s GitLab
would get support for the `CODEOWNERS` feature in GitLab. Unfortunately,
that’s not happened, and it remains an enterprise-only feature.
As such, that means that listing a co-maintainer of GLib in `CODEOWNERS`
is not sufficient to grant them permissions to actually merge MRs or
triage issues. That means they can’t really do any co-maintaining.
So fix that by updating the DOAP from `CODEOWNERS`. This doesn’t change
the list of co-maintainers at all, or the amount of trust assumed of
anybody.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This documents what we already do, rather than trying to make any
improvements to the process. They can happen separately, later, as
they’re a little more involved than just writing a Markdown document.
For example, we really should automate some of this.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
iconv is complicated to look up. That complexity now resides in
Meson, since 0.60.0, via a `dependency('iconv')` lookup, so use that
instead.
No effort is made to support the old option for which type of iconv to
use. It was a false choice, because if only one was available, then
that's the only one you can use, and if both are available, the external
iconv shadows the builtin one and renders the builtin one unusable,
so there is still only one you can use.
This meant that when configuring glib with -Diconv=libc on systems that
had an external iconv, the configure check would detect a valid libc
iconv, try to use it, and then fail during the build because iconv.h
belongs to the external iconv and generates machine code using the
external iconv ABI, but fails to link to the iconv `find_library()`.
Meson handles this transparently.
