If a GInputStream does not provide a read_async() implementation, but
does implement GPollableInputStream, then instead of doing
read-synchronously-in-a-thread, just use
g_pollable_input_stream_read_nonblocking() and
g_pollable_input_stream_create_source() to implement an async read in
the same thread. Similarly for GOutputStream.
Remove a bunch of existing read_async()/write_async() implementations
that are basically equivalent to the new fallback method.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
Implement GPollableInputStream in GMemoryInputStream and
GConverterInputStream, and likewise implement GPollableOutputStream in
the corresponding output streams.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
Move g_pollable_source_new() here from gpollableinputstream.c, add
g_pollable_source_new_full(), and add some new methods to do either
blocking or nonblocking reads depending on a boolean argument.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
Make g_pollable_input_stream_read() and
g_pollable_output_stream_write() look a little bit more like the
non-pollable versions in terms of error handling, etc. Also, use the
read_fn and write_fn virtual methods directly rather than calling
g_input_stream_read()/g_output_stream_write(), to avoid problems with
re-entrancy involving the "pending" flag.
Also belatedly add single-include guards to the header files.
https://bugzilla.gnome.org/show_bug.cgi?id=673997
The loop was using a GConverterResult variable where it meant to use a
gssize, and since GConverterResult was ending up as an unsigned type,
this meant the (res < 0) check always failed.
Resources are always little endian, so the gvdb is byteswapped. When looking
up the value, it would return a new byteswapped variant, making the data
returned from do_lookup() invalid once that variant is unref'd. Since
byteswapping doesn't matter for the "ay" data anyway, just use
gvdb_table_get_raw_value() instead and only byteswap the length and flag
values.
https://bugzilla.gnome.org/show_bug.cgi?id=673409
* Add resolver functions for looking up DNS records of
various types. Currently implemented: MX, TXT, SOA, SRV, NS
* Return records as GVariant tuples.
* Make the GSrvTarget lookups a wrapper over this new
functionality.
* Rework the resolver test so that it has support for
looking up MX, NS, SOA, TXT records, and uses GOptionContext
https://bugzilla.gnome.org/show_bug.cgi?id=672944
This patch solves two problems:
First, it allows builders to optionally cut the circular dependency
between dbus and glib by disabling the modular tests (just like how
the tests can be disabled in dbus).
Second, the tests are entirely pointless to build if cross-compiling.
It also moves us slightly closer to the long term future we want where
the tests are a separate ./configure invocation and run against the
INSTALLED glib, not the one in the source tree. This would allow us to
run the tests constantly, not just when glib is built.
https://bugzilla.gnome.org/show_bug.cgi?id=667806
For quite some time the recommended usage of GSettings and dconf has
been to use paths like /org/gnome/example/. Use of /apps/ has spilled
over from GConf and is continuing to make its way into a number of
applications as they port.
glib-compile-schemas will now warn about these types of paths being
used. This generates a lot of noise, but hopefully it will reduce the
number of ported applications making this mistake.
Turns out libdbus doesn't send struct ucred credentials on linux, but
just relies on the SO_PEERCRED support. However, gdbus does send, and
expect to recieve a ucred credential. So, when libdbus talks to a
gdbus server the authentication fails to send the credentials.
We fix this by falling back to g_socket_get_credentials() if we don't
get any credential messages.
When presented with an array of empty arrays of 8-byte-aligned types,
GDBus would incorrectly apply the 8-byte alignment when reading back.
https://bugzilla.gnome.org/show_bug.cgi?id=673612
Signed-off-by: David Zeuthen <davidz@redhat.com>
D-Bus arrays are serialized as follows:
1. align to a 4-byte boundary (for the length)
2. uint32: the length of the serialized body in bytes
3. padding for the alignment of the body type (not included in the length)
4. the body.
Note that 3. is a no-op unless the body type is an 8-byte aligned type
(uint64, int64, double, struct, dict_entry), since you are always on a
4-byte boundary from aligning and writing the length.
So, an empty aax (that is, an array containing zero arrays of int64)
is serialized as follows:
1. align to a 4-byte boundary
2. length of the contents of this (empty) array, in bytes (0)
3. align to a 4-byte boundary (the child array's alignment requirement)
4. there is no body.
But previously, GDBus would recurse in step three to align not just for
the type of the child array, but for the nonexistent child array's
contents. This only affects the algorithm when the grandchild type has
8-byte alignment and the reader happened to not already be on an 8-byte
boundary, in which case 4 bytes were spuriously skipped.
https://bugzilla.gnome.org/show_bug.cgi?id=673612
Signed-off-by: David Zeuthen <davidz@redhat.com>
The code that is checking the userinfo part was accidentally
given a pointer to the end of the userinfo, so it was not
checking the right portion of the string at all.
gio/gproxyresolver.h: GProxyResolver already documented in gio/giotypes.h
gio/gtlsbackend.h: GTlsBackend already documented in gio/gtlsbackend.c
gio/gtlsclientconnection.h: GTlsClientConnection already documented in gio/gtlsclientconnection.c
gio/gtlsconnection.h: GTlsConnection already documented in gio/gtlsconnection.c
gio/gunixconnection.h: GTcpConnection already documented in gio/giotypes.h
glib/gversion.h: GLIB_CHECK_VERSION already documented in glib/gversion.c
Found these thanks to the improved gobject-introspection
GTK-Doc comment block/annotation parser.
See https://bugzilla.gnome.org/show_bug.cgi?id=672254https://bugzilla.gnome.org/show_bug.cgi?id=673385
GDBus heavily relies on idles for some of its cleanup operations,
and not running a mainloop leads to things not getting cleaned
up properly, which in turn leads to test failures, since the
session bus singleton does not get removed.
This program is only used indirectly from gapplication.c in
tests, but that is no reason to let it segfault when it is
run from the commandline without arguments.
This is needed because glib-mkenums doesn't handle #ifdef values in
enums, and so it needs to have all values always defined in the enum.
When not available, define the missing values to a negative value.
g_input_stream_read() does state that it returns 0 on end of file, but
not in the Returns: line, so it's easy to miss on a quick skim-read.
g_input_stream_read_async() documents that g_input_stream_read_finish()
returns 0 on end of file, but g_input_stream_read_finish() itself does
not.
https://bugzilla.gnome.org/show_bug.cgi?id=673174
On some systems gelf.h may not be stored under the top level include
directory in which case we need to add the correct include paths in
cflags by using pkg-config(1).
GDBusProxy sets an error on a GSimpleAsyncResult and then returns
without dispatching the result for completion (and leaks the result in
the process). Fix that.
Also add a testcase. Unfortunately, adding the testcase uncovered
bug #672248. We can work around that by reordering the tests.
https://bugzilla.gnome.org/show_bug.cgi?id=672249
When building with MinGW/MSYS with srcdir != builddir the build fails:
- to locate the generated .def files
- creating libglib-gdb.py
- creating libgobject-gdb.py
Solved this by explicitly instructing these files to be generated
in $(builddir)/...
https://bugzilla.gnome.org/show_bug.cgi?id=653167
Now that we're using g_simple_async_result_set_check_cancellable() we
no longer need this terrible hack of carrying the GCancellable on the
GSimpleAsyncResult using qdata. See bug 672013 for more details.
https://bugzilla.gnome.org/show_bug.cgi?id=672013
Signed-off-by: David Zeuthen <davidz@redhat.com>
Call g_simple_async_result_set_check_cancellable() after all
GSimpleAsyncResult creation in order to take advantage of the new
reliable cancellation feature.
The guarantee of reliable cancellation fixes a bug in dbusmenu (which
was already assuming that cancellation was reliable). See this bug:
https://bugs.launchpad.net/ubuntu/+source/libdbusmenu/+bug/953562https://bugzilla.gnome.org/show_bug.cgi?id=672013
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add a function g_simple_async_result_set_check_cancellable() to provide
a GCancellable that is checked for being cancelled during the call to
g_simple_async_result_propagate_error().
This gives asynchronous operation implementations an easy way to
provide reliable cancellation of those operations -- even in the case
that a positive result has occured and is pending dispatch at the time
the operation is cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=672013
If there are no modules installed then the most appropriate thing is to
have no cachefile instead of an empty one. This unbreaks the "clean
directory after 'make uninstall'" check that automake does.
https://bugzilla.gnome.org/show_bug.cgi?id=671664
Otherwise we get criticals a'la
GLib-GIO-CRITICAL **: g_cancellable_release_fd: assertion `cancellable->priv->fd_refcount > 0' failed
when reading/writing to certain kinds of file descriptors.
Patch reviewed by Dan Winship on IRC.
Signed-off-by: David Zeuthen <davidz@redhat.com>
We were attempting to unregister our ownership of our D-Bus name even in
the case that we were non-unique (ie: we didn't actually own the name).
Rework the logic a bit to prevent that: for non-unique, we leave
impl->bus_name as NULL and we only register/unregister if it is
non-NULL.
If an application (such as Nautilus) wants to show a sidebar with
devices group into different groups such as "Devices" and "Network",
it's currently up to the application itself to do the classification
(for example by looking at the URI scheme for the activation root,
e.g. smb://).
This patch adds a new identifier G_VOLUME_IDENTIFIER_KIND_CLASS that
can be set by volume monitors and used by applications.
See https://bugzilla.gnome.org/show_bug.cgi?id=668295
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add new macros to disable -Wdeprecated-declarations around a piece of
code, using the C99 (and GNU89) _Pragma() operator. Replace the
existing use of #pragma for this in gio, and suppress the warnings in
gvaluearray.c as well.
https://bugzilla.gnome.org/show_bug.cgi?id=669671
Unix and Windows gio GSocket behaves differently when the socket is
closed by the peer. On Unix, the client receives pending data before
receiving HUP. But on Windows, the HUP may come before, resulting in
unreliable and racy code. We should have same behaviour on all
platforms.
According to MSDN documentation: "an application should check for
remaining data upon receipt of FD_CLOSE to avoid any possibility of
losing data."
https://bugzilla.gnome.org/show_bug.cgi?id=669810
For a number of reasons it might be useful to register the object paths
associated with a non-unique application so that the application can at
least field requests to its unique D-Bus name.
https://bugzilla.gnome.org/show_bug.cgi?id=647986
g_file_read() was returning G_IO_ERROR_IS_DIRECTORY when you tried to
open a directory on unix, but G_IO_ERROR_PERMISSION_DENIED on win32.
Fix that, and add a test to tests/file.c
Pointed out on IRC by Paweł Forysiuk.
https://bugzilla.gnome.org/show_bug.cgi?id=669330
This is useful when using certain D-Bus services where the
PropertiesChanged signal does not include the property value such as
e.g. various systemd mechanisms, see e.g.
https://bugs.freedesktop.org/show_bug.cgi?id=37632
Signed-off-by: David Zeuthen <davidz@redhat.com>
