New test to make sure we exercise the code paths in gdesktopappinfo.c
that get triggered when g_desktop_app_info_launch_uris_with_spawn()
is used (i.e. unknown app ID, no session bus), both for when either
a single URI or multiple ones are expected by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=791337
If an application calls g_app_info_launch_uris() with a GList that includes
NULL values in some of its data members, and GIO ends up internally calling
g_desktop_app_info_launch_uris_with_spawn() for whatever reason (e.g. no
D-Bus session available), expand_macro() will crash due to the invalid data.
As this is considered a programmer error, use g_return_val_if_fail() in those
situations to prevent the crash from happening, but printing a warning anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=791337
This list will be modified in-place when calling expand_macro(), so pass a copy
of it instead the original pointer, that is supposed to be an input parameter
only for g_desktop_app_info_launch_uris_with_spawn().
https://bugzilla.gnome.org/show_bug.cgi?id=791337
The thumbnail attributes would previously only be set if thumbnail::path
was included in the query — so querying for just thumbnail::is-valid
would return no results.
This fixes the behaviour of
gio info -a thumbnail::is-valid ./some-file.png
vs
gio info -a thumbnail ./some-file.png
The first command would previously list nothing. The second would
previously list a thumbnail::path and thumbnail::is-valid.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=791325
If we can’t convert the inotify event mask into a GFileMonitorEvent enum
value, don’t propagate it to GLocalFileMonitor, since it hits an
assertion failure in that case.
This should no longer be possible since the previous commit to ignore
IN_Q_OVERFLOW events, but we might as well change this just in case
other bugs crop up in event mask handling.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776147
There’s not much we can do about them, and if they go unhandled, they
can propagate through to g_file_monitor_source_handle_event() and cause
assertion failures due to not mapping to a GFileMonitorEvent.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776147
That event is deprecated, and the kqueue backend can’t provide enough
information to go alongside the event (i.e. the name of the new file).
Use G_FILE_MONITOR_EVENT_DELETED instead.
Quite disappointed in the kqueue documentation for this: I cannot find a
single piece of documentation or example about how NOTE_RENAME is
supposed to communicate the new name of the file.
If it turns out that this is possible, the code can be amended again in
future. At least now it doesn’t abort.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776147
Uris may be altered by the following code, which breaks xdg-open:
file = g_file_new_for_commandline_arg (arg[i])
uri = g_file_get_uri (file);
Examples of possible uri changes:
mailto:email -> mailto:///email
magnet:?xt=urn:hash -> magnet:///?xt=urn:hash
ssh://user@host -> sftp://user@host
This patch causes that uris aren't preprocessed for locations with
scheme, however absolute and relative paths are still preprocessed.
https://bugzilla.gnome.org/show_bug.cgi?id=779182
Commit 7384e37 broke builds on these platforms as *NIX-only APIs are
being used unconditionally. Fix the build by building these portions
when not on Windows or Cocoa.
https://bugzilla.gnome.org/show_bug.cgi?id=780296
If gio open exits before the program it starts fully activates, then
the dbus-daemon may avoid doing the activating method call.
This commit works around the problem by pinging the activated application,
and waiting for a reply.
Same workaround is used in gtk-launch and was used in gvfs-open before
it was replaced by gio open.
https://bugzilla.gnome.org/show_bug.cgi?id=780296
Commit 53ed180 improved mtab processing, however, also introduced bug
in code obtaining mount points. mtab was used by mistake also for
g_unix_mount_points_get implementation, which is obviously wrong and
fstab has to be used instead...
https://bugzilla.gnome.org/show_bug.cgi?id=781867
The m4 and bash completion items are usable and relevant
depending on the host system's configuration. So, we check for the
presence of the programs that these items depend on, and only install
them when those programs are found.
For the Valgrind suppression files, we don't install them on Windows as
Valgrind is currently not supported on Windows.
Als fix the path where the GDB helpers are installed, as the path is
incorrectly constructed.
This will fix the "install" stage when building on Visual Studio at
least as there are some post-install steps that are related to them,
which will make use of these programs.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
This reverts commit 799f8dcd46fb40ea206d9f1b5468db62cc00a72e.
This patch seems to break applications that use GTask specific
operations with GSocket. We will need to investigate a bit more
on this issue but for now we revert it and leave it for the
next major release.
Instead of a full reference, which causes problems for clients that
expect a GSettings instance to stop firing signals once they drop the
last reference.
https://bugzilla.gnome.org/show_bug.cgi?id=780861
See bug #786456 for a detailed analysis of the situation which can cause
this (in summary, if a g_subprocess_wait_async() call is cancelled on a
GSubprocess which is already known to be dead).
The problem was that the GCancellable callback handler was
unconditionally returning a result for the GTask for
g_subprocess_wait_async(), even if that GTask had already returned a
result and the callback was being invoked after the GTask had been
removed from the pending_waits list.
Fix that by checking whether the GTask is still in the pending_waits
list before returning a result for it.
Thanks to Will Thompson for some very useful unit tests which reproduce
this (which will be pushed in the following commit).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=786456
Similarly to the previous commit, move the temporary directory for the
monitor test from $(cwd) to the system temporary directory.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785260
Rather than creating a temporary directory in the current directory
(typically the builddir), then never deleting it; create one in the
system /tmp directory, and clean it up properly afterwards.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785260
The following warning is shown, when both g_output_stream_write and
g_output_stream_close fail:
"GError set over the top of a previous GError or uninitialized memory."
Let's clear the error after use.
https://bugzilla.gnome.org/show_bug.cgi?id=786463
We want to set _WIN32_WINNT so that functions will be properly found in
the headers, to target the NT6.1+ (Windows 7+) APIs.
Also improve the checks for if_nametoindex() and if_indextoname() on
Windows as they are supported in Windows Vista+, but they have
to be checked by linking against iphlpapi.lib (or -liphlpapi). On other
platforms, they are still checked as they were before.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
Some of the dependencies' build systems for Visual Studio do not provide a
pkg-config file upon build, so we use find_library() for them when the
corresponding pkg-config files are not found during Visual Studio builds,
so that one will not need to make up pkg-config files for them, which
could be error-prone. These .lib names match the names that are built
with the officially supported build system that is used by their
respective Visual Studio support.
For ZLib, this will make gio-2.0.pc reflect on the zlib .lib based on
what is found, or whether we use the fallback/bundled ZLib, when we
don't have a pkg-config file for ZLib on MSVC. We still need to depend
on Meson to be updated to put the correct link argument for linking ZLib
in the pkg-config case.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
Calling g_variant_get (parameters, "(&s)") when parameters has a
signature other than (s) is considered to be a programming error.
In practice the message bus (dbus-daemon or a reimplementation) should
always send the expected type, but be defensive.
(Modified by Philip Withnall to improve type check.)
Signed-off-by: Simon McVittie <smcv@collabora.com>
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=784392
PulseAudio and LibreOffice are among the services that use this flag.
Refusing to queue for a name lets you do this transaction,
but atomically, avoiding the transient state where you briefly join
the queue and then are given the name when its primary owner drops it:
result = RequestName(name)
if result == IN_QUEUE:
ReleaseName(name)
result = EXISTS
return result
(Modified by Philip Withnall to add documentation.)
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=784392
The implementation passes flags through directly to the RequestName()
call, so if any new values break that equivalence, the implementation
will have to be changed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=784392
If no callback is provided, token is never set, but it’s then passed to
g_variant_new_string(), which requires a non-NULL input.
Fix that by moving all the option handling inside the (callback != NULL)
case.
Spotted by Coverity (CID #1378714).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785817
Little did I know when making commit
c257757cf6774974cf15370ccf09fad7ee855668 that a lot of the output of
glib-compile-schemas is string matched in some of the unit tests. Fix
them to match the updated strings.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=695573
Some platforms use different extensions for compile-time linkable
libraries vs runtime-loadable modules. Need to use special libtool
flag in the latter case for consistency with what gmodule expects.
https://bugzilla.gnome.org/show_bug.cgi?id=731703
• Fix capitalisation to be consistent
• Use Unicode quotation marks where appropriate
• Move trailing \n characters out of the translable strings and append
them unconditionally
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=695573
Mention that it really is a good idea to save errno before doing
literally anything else after calling a function which could set it.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785577
