2000-03-22 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gutils.c (g_get_current_dir): Ok, Marcus Brinkmann
<Marcus.Brinkmann@ruhr-uni-bochum.de> convinced me, that 128 KB
path length might not be enough for the HURD. So I changed the
loop to at least avoid an integer overflow, which could happen at
beyond 2GB size ;-)
2000-03-22 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Test for sched_yield as the native yield function
first. Corrected typo g_thread_sleep -> g_usleep. Corrected
message for the pthread_create test. Negative Priorities are
allowed (and used on Solaris), so consider
sched_get_priority_min failed only if it returns -1, not <0. Check
for sched_get_priority_min also in -lrt, if not found in -lpthread
alone and add -lrt to G_THREAD_LIBS then. Remove special case
handling of priorities for older solaris versions and posix
threads. Thanks to Wan-Teh Chang <wtc@netscape.com> for suggesting
some of those changes.
* config.guess, config.sub, ltconfig, ltmain.sh:
Upgrade to libtool 1.3.4.
2000-03-21 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib.h, configure.in, gutils.h: always define G_GNUC_EXTENSION,
even when not needed by GLib. That's actually also the way, the
GLib reference manual describes that macro. Therefore I had to
remove the lonesome #include <glibconfig.h> in gutils.c, which
doesn't seem to be needed there however. This change should make
Ben Gertzfield <che@debian.org> happy.
* gutils.c: Furthermore two warnings in gutils.c were voided,
which crept in due to my last change.
2000-03-21 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gutils.c (g_get_current_dir): Allocate only up to 128KB for a
pathname. While this is an arbitrary value just like 2048, it
seems to be enough (after all, even 4GB is an arbitrary value).
2000-03-20 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gmain.c (g_main_poll): Warn in case of an error during the call
to poll(2). Closes Bug#7564 as reported by David Helder
<dhelder@umich.edu>.
2000-03-20 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gutils.c (g_get_current_dir): Make g_get_current_dir work on
systems with unlimited pathname length like the HURD (It worked
there before, but only for pathes shorter than 2048). Closes
Bug#4525 as reported by Marcus Brinkmann
<Marcus.Brinkmann@ruhr-uni-bochum.de>.
2000-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Added the missing POSIX_NO_YIELD and
POSIX_NO_PRIORITIES warning messages.
* configure.in: Use AC_TRY_RUN instead of AC_TRY_LINK, to test for
real thread support. On solaris pthread_create can be linked to
even in -lc, but it doesn't work then.
* configure.in: Don't use priorities for threads, when the
minimal/maximal priorities couldn't be determined at configure
time.
* configure.in, gthread.c: Always define GSystemThread in
glibconfig.h to represent a system thread.
* configure.in: Do not use native recursive threads, when
possibe. We use some features, that they do not expose (namely the
depth counter).
* glib.h, gthread.c: Redefined GStaticRecMutex. The functions are
now implemented in a different way, which should be way
faster. Alsothere are now functions g_static_rec_mutex_unlock_full
and g_static_rec_mutex_lock_full to leave/enter a recursive mutex
completly.
* gthread.c (g_thread_self): Do not test the system_thread to be
non-zero to speed things up.
* gthread.c (g_mutex_init): Therefore set the system_thread of the
main thread here.
* tests/thread-test.c: Rerun all tests once again, but this time
we fool the system into thinking, that the available thread system
is not native, but userprovided.
* gthread/gthread-posix.c: Don't use priorities for threads,
when the minimal/maximal priorities couldn't be determined at
configure time.
* gthread/gthread-posix.c: Don't check for errors, when
setting the scope of a tread to system, as some posix
implementations can't do that and we don't want the thing to
fail because of that.
2000-03-13 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gqueue.c (g_queue_push_tail_link, g_queue_push_head_link): We
want the next and prev pointer of the inserted link to be NULL.
2000-03-04 Tor Lillqvist <tml@iki.fi>
* gwin32.c (g_win32_error_message): New function that returns the
message string for a Win32 error code.
* glib.h: Declare it.
* glib.def: Export it, plus g_node_copy.
* gmodule-win32.c: Call g_win32_error_message() to get the error
message strings.
* libgplugin_a.c
* libgplugin_b.c
* gmodule.c: Remove LibMain functions that were needed by LCC,
which is not a supported compiler.
* testgmodule.c (main): Test for G_MODULE_IMPL ==
G_MODULE_IMPL_WIN32, not G_OS_WIN32.
* gmoduleconf.h.win32: Remove LCC stuff from here, too.
2000-03-03 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Make the search for pthread_attr_... prototypes
find names at the start of a line also, like it is on AIX. Thanks
to Valdis Kletnieks <Valdis.Kletnieks@vt.edu> for the info.
Wed Mar 1 10:39:39 2000 Tim Janik <timj@gtk.org>
* gslist.c (g_slist_reverse): minor optimization.
* testglib.c (g_node_test): added a couple of tests for
g_node_copy().
* glib.h:
* gnode.c (g_node_copy): new function to copy subtrees,
supplied by dbsears@ix.netcom.com.
changed iterator to walk the children list backwards, so
we get down from O(n^2) to O(n).
* gnode.c (g_node_first_sibling): applied patch from
dbsears@ix.netcom.com to optimize access if node->parent
is present.
* gutils.c (g_get_any_init): backed out HAVE_PW_GECOS check around
assignment of g_real_name, sicne HAVE_PW_GECOS is never defined and
thus breaks the original code.
* merged changes from 1.2.7.
Sat Feb 19 19:43:29 2000 Tim Janik <timj@gtk.org>
* testgmodule.c (main): added test to check that not yet bound symbols
in shared libraries of the main module are retrievable, from David Gero.
Fri Jan 28 11:37:41 2000 Owen Taylor <otaylor@redhat.com>
Bug #4156 - Changes vaguely modelled after Scott Gifford's patch
* gtimer.c (g_timer_elapsed): Never report negative times -
clip times to 0.
* gmain.c (g_timeout_prepare): Guard against unexpected
clock shifts by never setting a timeout of more than
data->interval msecs.
2000-02-23 Tor Lillqvist <tml@iki.fi>
* README.win32: Add a missing step to the setup instructions for
gcc-2.95.2. Thanks to Arnaud Charlet.
* glib.def: Add missing entry point.
2000-02-18 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Changed GCC version test to also accept major
versions > 2. Thanks to Ben Gertzfield <che@debian.org> for
pointing this out.
Thu Feb 17 12:53:44 2000 Tim Janik <timj@gtk.org>
* gstring.c: changed g_str_hash() to a 31 bit version based on
a submission by Karl Nelson and hand optimized ad absurdum by
various people ;)
* gstring.c: applied patch from havoc for new gstring functions,
added some more sanity checks, coding style fixups.
2000-02-13 Havoc Pennington <hp@pobox.com>
* tests/string-test.c (main): Add tests for the new GString
features
* testglib.c (main): Add tests for the new GString features
* gstring.c (g_string_insert_len): New function; insert
a given length of string at a given position.
(g_string_append): reimplement in terms of g_string_insert_len
(g_string_append_len): new function
(g_string_insert_c): accept -1 for "pos" arg to mean "append"
(g_string_append_c): reimplement in terms of g_string_insert_c
(g_string_prepend): reimplement in terms of g_string_insert_len
(g_string_prepend_len): new function
(g_string_prepend_c): reimplement in terms of g_string_insert_c
(g_string_insert): reimplement in terms of g_string_insert_len
* glib.h: Declare g_string_insert_len, g_string_append_len,
g_string_prepend_len
Sun Feb 13 08:16:47 2000 Tim Janik <timj@gtk.org>
* configure.in: wtf??? someone destroyed the configure.in, reverting to
an older version from Feb 4 which apears to still work.
2000-02-05 Tor Lillqvist <tml@iki.fi>
* glib.rc.in gmodule.rc.in gthread.rc.in: New files, for putting
version info in the DLLs on Win32.
* Makefile.am: Generate corresponding *.rc files and distribute
them.
* makefile.cygwin.in: Add rules to automatically bump a "build
number" in the version info in the rc files each time the DLL is
built. But do this only for the person who releases binaries. If
others build the DLLs, the build number is set to zero.
Fri Feb 4 19:36:05 2000 Tim Janik <timj@gtk.org>
* glib.h:
* gdataset.c: return stolen data from g_datalist_id_remove_no_notify()
and g_dataset_id_remove_no_notify() to avoid second lookup for common
use.
2000-02-01 Tor Lillqvist <tml@iki.fi>
* glib.h
* gstrfuncs.c (g_filename_to_utf8, g_filename_from_utf8): New
functions for conversion between UTF-8 and the encoding expected
by C runtime functions like open() and stat(), and returned by
readdir().
Implement them on Win32 where we use the system "ANSI" codepage,
which might be single-byte or double-byte. On Unix, just skip the
issue for now and provide dummy implementations that return a copy
of the argument.
* README.win32
* build-dll
* glib.def: Minor updates.
Wed Jan 26 05:24:38 2000 Tim Janik <timj@gtk.org>
* glib.h:
* gmain.c: s/current_time/dispatch_time/ for the dispatch() handlers.
refetch the current time after invocation of poll() to cover up for
the time spent in that function call.
Fri Jan 21 10:18:24 2000 Owen Taylor <otaylor@redhat.com>
* glib.h (G_N_ELEMENTS): Added G_N_ELEMENTS macro to determine
the number of elements in an array.
1999-11-16 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* acconfig.h, config.h.win32.in, configure.in: Renamed
GLIB_SIZEOF_PTHREAD_T to GLIB_SIZEOF_SYSTEM_THREAD to reflect
changed meaning.
* configure.in: Cope with systems, that have a pthread_t type,
that is not a pointer. Hint from Karl Nelson
<kenelson@ece.ucdavis.edu>. Define GLIB_SIZEOF_SYSTEM_THREAD to 4
for Solaris. Cope with systems, that have no default mutex
initialize, like obviously most DCE systems.
* glib.h, gthread.c: Changed the prototype of thread_create and
thread_self to return the system thread into provided memory
instead of a return value. This is necessary, as HPUX has a
pthread_t, that is bigger than the biggest integral type there.
* gthread.c: system_thread is no longer a pointer, but an memory
area of size GLIB_SIZEOF_SYSTEM_THREAD. Changed the
zeroinitialization and the tests for zeroness accordingly.
1999-11-08 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Make the test for getpwuid_r work on newer AIX
versions, too. Still works on Solaris and Linux. Patch from Craig
Rodrigues <rodrigc@mediaone.net>.
1999-11-08 Tor Lillqvist <tml@iki.fi>
* gwin32.c (g_win32_getlocale): Look at env vars LC_ALL, LC_CTYPE
and LANG first. Some refinements to the sublanguage logic.
1999-11-01 Tor Lillqvist <tml@iki.fi>
* glib.h
* glib.def: Rename Win32-only functions from gwin_* to g_win32_*
to match the GLib naming conventions.
* gutils.c
* gwin32.c
* testglib.c
* makefile.{cygwin,msc}: Move the Win32-only functions to the new
file gwin32.c
1999-10-31 Tor Lillqvist <tml@iki.fi>
* gcache.c (g_cache_remove): Don't crash if removing a nonexistent
value.
* gutils.c (gwin_getlocale): New Win32-specific function, returns
a Unixish current locale string (en, zh_TW etc).
* glib.h: Declare it.
* glib.def: Export it.
* testglib.c: Test it.
* gmessages.c (Win32: ensure_stdout_valid): Some improvements,
make sure we don't call AllocConsole several times, which I think
has happened.
Sun Oct 17 18:11:40 1999 Tim Janik <timj@gtk.org>
* gdataset.c (g_data_set_internal): remove g_dataset_global_lock around
destroy() notification here as well.
1999-10-15 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gdataset.c (g_datalist_clear_i): Avoid Freezing, when g_datalist
is called recursivly. Reported by Ola Andersson <rand@ling.umu.se>.
Tue Oct 12 14:17:12 1999 Tim Janik <timj@gtk.org>
* glib.h: removed useless g_string(x) macro that cluttered the namespace
and was just a poor wrapper around the cpp '#' symbol, use #x if you
need to work around this.
added new macro G_STRINGIFY(arg) that will convert arg to a string,
no matter whether it contains macros or not.
1999-10-12 Tor Lillqvist <tml@iki.fi>
* config.h.win32.in: Define the new GLIB_SIZEOF_* constants here,
too.
* glib.h: Small Win32 comments improvement.
Tue Oct 12 12:16:12 1999 Tim Janik <timj@gtk.org>
* gmessages.c (g_printf_string_upper_bound): completly new implementation
for printf string upper bounds calculation.
we handle all glibc 2.1 format specifiers now, except for positional
parameters (%nn$...) and wide char strings, plus some obscure upper
case variants of the standard conversions. this fixes a lot of
bugs in the old code, i.e.
- NULL format strings
- floats with exponents >+24
- %G
- precision specifications in general
- negative field widths
- %p for SIZEOF_VOID_P > 4 platforms
we now issue warnigns in places where the old code would have
caused buffer overruns anyways. warnings are suppressed when invoked
from glogv(), to avoid infinite recursions if someone passes a log
message that comes with really obscure format specifications.
Tue Oct 12 11:49:00 1999 Tim Janik <timj@gtk.org>
* gstrfuncs.c: nuked old g_printf_string_upper_bound() version.
Tue Oct 12 03:34:40 1999 Tim Janik <timj@gtk.org>
* glib.h: added GFloatIEEE754 and GDoubleIEEE754 unions to access sign,
mantissa and exponent of IEEE floats and doubles (required by the new
version of g_printf_string_upper_bound). the unions are endian specific,
we handle G_LITTLE_ENDIAN and G_BIG_ENDIAN as of currently. ieee floats
and doubles are supported (used for storage) by at least intel, ppc and
sparc, reference:
http://twister.ou.edu/workshop.docs/common-tools/numerical_comp_guide/ncg_math.doc.html
Mon Oct 11 18:01:49 1999 Tim Janik <timj@gtk.org>
* configure.in: added additional checks to figure sizes of size_t,
ptrdiff_t and intmax_t (required by g_printf_string_upper_bound).
* glib.h: (Win32) Drop the mapping of POSIX function names to the
underscored versions, it's unnecessary after all. With MSVC we get
them from oldnames.lib, with gcc-2.95 and mingw32 from
-lmoldname-msvc. Add comment about what headers to include for
prototypes.
1999-10-05 Tor Lillqvist <tml@iki.fi>
* glibconfig.h.win32.in: Don't define WIN32 and NATIVE_WIN32.
* gerror.c (g_on_error_query): (Win32) Slightly more verbosity.
* build-dll: Don't strip.
* gmodule.h: (Win32) Use __declspec(dllexport) in G_MODULE_EXPORT
only with gcc.
Wed Sep 22 01:53:18 1999 Tim Janik <timj@gtk.org>
* glib.h (NULL): define NULL as (0L) if __cplusplus is defined, to
avoid "ANSI C++ forbids implicit conversion from `void *' in argument
passing" errors upon NULL usage in C++ programs (gcc-2.95 is on crack
for erroring out on this, instead of just issueing a warning).
* glib.h (g_trash_stack_pop): use uncasted NULL again.
Fri Sep 17 10:24:45 1999 Tim Janik <timj@gtk.org>
* gmem.c (g_mem_chunk_compute_size) (g_mem_chunk_new): applied patch
from Soeren Sandmann <sandmann@daimi.au.dk>, to force mem chunk's area
sizes to be a multitiple of atom_size, and to eliminate the MAX_MEM_AREA
restriction of 65536 bytes. we also catch cases where users pass an area
size < atom size with a return_if_fail statement now (which is ok,
because previously this lead to memory corruption anyways).
Mon Sep 13 23:25:59 1999 Tim Janik <timj@gtk.org>
* gmessages.c (g_logv): in case we have to abort the program,
debugging is enabled and we are not called recursively, try
to abort with raise (SIGTRAP) first, so developers may ignore
certain failure conditions during debugging stage.
Thu Aug 26 15:09:36 1999 Tim Janik <timj@gtk.org>
* Makefile.am:
* gmodule/Makefile.am:
* gthread/Makefile.am: added --export-dynamic so we can load dynmic
modules, (required, according to the libtool 1.3.3 docu).
1999-07-23 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* grand.c (g_rand_new): Use /dev/urandom, as it doesn't block,
which /dev/random might do. Do not XOR the time, when getting the
seed form /dev/urandom, as this is good itself. Prevent the
initial seed from being zero, which causes the PRNG to produce
only zeros. Hints from Colin Plumb <colin@pgp.com>.
* glib.h (g_trash_stack_push): Add a cast.
* gslist.c
* glist.c: Make the inline functions static inline, and add
separate extern wrappers. Not all compilers produce callable entry
points for inline functions, even if gcc does.
Sun Aug 15 02:47:14 1999 Tim Janik <timj@gtk.org>
* glib.h (g_trash_stack_pop): eliminate memset() call, since string.h
has not neccessarily been included prior to glib.h.
Mon Aug 2 21:03:10 1999 Tim Janik <timj@gtk.org>
* configure.in: added --enable-msg-prefix option.
* gmessages.c (g_log_default_handler): feature "prg_name (pid:%u): "
if --enable-msg-prefix was selected (use "(process:%u): " if
g_get_prgname () returns NULL, along the lines of g_on_error_query).
* glib.h
* gstrfuncs.c
* tests/strfunc-test.c: Rename g_strccpy to g_strcompress and
g_strecpy to g_strescape per Tim Janik's suggestion. Dropped the
destination parameter, always g_malloc a new string. Fix bug in
g_strcompress, octal digits were gobbled up without limit, should
use max three.
Sources that use g_strescape must have ifdefs to be compilable
both with GLib 1.2 and 1.3.
* glib.h
* gstrfuncs.c: the #define for g_strescape interfered with the
compilation of the function, so just remove the function and
note that it's deprecated in the header
-Yosh
* gstrfuncs.c (g_strccpy, g_strecpy): New functions.
* glib.h: Declare and document them. Define the deprecated
g_strescape as a macro that calls g_strecpy.
* tests/strfunc-test.c (main): Test them.
* makefile.{cygwin,msc}.in
* tests/makefile.{cygwin,msc}.in: Remove gstack and its test
program.
* glib.def: Additions and removals.
* README.win32: Improve gcc build instructions.
* build-dll: Also build import library for MSVC.
Sat Jul 24 20:11:35 1999 Tim Janik <timj@gtk.org>
* merged GLib 1.3.0 with glib-1.2.3 from Fri Jul 16 22:18:36.
* incorporated proposed cleanups from gtk-devel-list.
* bumped version number to GLib-1.3.1
* glib.h:
* gqueue.c:
* gstring.c:
* glist.c:
removed string tokenisation (we got g_strsplit() and g_strjoin()
already) and readline functions.
s/g_list_delete/g_list_delete_link.
implemented g_slist_delete_link.
removed notion of g_ATEXIT() macro in glib.h, this is an *internal*
macro, g_atexit() is provided for public consumption.
added GTrashStack inline utility functions.
reimplement double eneded queues.
removed GStack implementation, people can use a queue or a (singly)
linked list for this task.
deprecated g_strescape(), we need the SunOS variants here.
* gdate.c: added DEBUG_MSG() macro to wrap old messages.
* *.*: CVS merges.
* upgrade to libtool 1.3.3.
* README.win32: Correct URL for mingw runtime sources.
* build-dll: Combine commands with &&.
* glib.h: Map also rmdir() and hypot() for MSVCRT library.
* makefile.cygwin.in
* tests/makefile.cygwin.in: New DLL naming style. GCC-compiled DLLs are
now called *.gcc.dll, to avoid binary incompatibilities with
MSVC-compiled versions.
* makefile.msc.in: Cosmetics.
1999-07-07 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Test for pthread_join rather than for
pthread_create to determine the right thread-lib. Makes it work on
mips-sgi-irix6.5. Hitn from to Jari Vuoksenranta
<javu@piano.ux.phys.jyu.fi>.
1999-07-01 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in, acconfig.h, gutils.c: Added a g_memmove
replacement for platforms without memmove, where bcopy can't
handle overlapping copies and the corresponding checks, which is
taken form the PERL Configure routine.
* glib.h: Updated the commentary about g_memmove to be right and
more GLib-like.
* configure.in: Removed test for rand_r, as it isn't used anymore.
* README.win32: Update the pthreads snapshot version we want.
Advice how to hand-expand the makefile.*.in files.
* config.h.win32.in: Define values needed by Sebastian Wilhelmi's
new thread stuff.
* glib.def: Add new functions.
* glibconfig.h.win32.in: Update the pthreads snapshot version.
Fix typo.
* gthread.c: Include config.h, guard inclusion of unistd.h. When
using gcc on Win32, g_thread_functions_for_glib_use must be marked
for export here, too.
* gtimer.c: Implement g_usleep on native Win32 using Sleep (which
only has millisecond granularity, though).
* makefile.cygwin.in
* makefile.msc.in: Update pthreads snapshot version. File
name changes. Remove testgthread.
* tests/makefile.cygwin.in
* tests/makefile.msc.in: Add thread-test. Link with gthread lib.
* gthread-posix.c: Guard pthread_attr_setscope call with test
for _POSIX_THREAD_PRIORITY_SCHEDULING, which should be defined
in a <pthread.h> that supports that feature.
1999-06-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in, acglib.m4, acconfig.h, glib.h, gthread.c:
Completed the thread support in GLib. Thread creation,
prioritizing threads, yielding, joining threads as well as
reader/writer locks and recursive mutexes are now in place. Please
test heavily on your platform. It is so far tested on
Linux/i386/pthreads, Solaris/Sparc/pthreads and
Solaris/Sparc/solaristhreads.
* gtimer.c, glib.h: Implement g_usleep (gulong microseconds) for
thread safe sleeping. (sleep() is not MT-safe at all!)
* gutils.c: Avoid compiler warning.
* tests/Makefile.am, tests/thread-test.c: New program to test some
aspects of the thread implementation.
* gthread.c, Makefile.am: Renamed from gmutex.c to reflect the
change of content.
* configure.in: Purged all appearances of nspr.
* gthread/gthread-posix.c, gthread-solaris.c: Added the native
implementations for the GLib's extended thread support.
* gthread/gthread-nspr.c: Removed for good. NSPR is nothing we
would want to build upon.
* gthread/gthread.c: Renamed to gthread-impl.c to avoid
confusion with ../gthread.c (Formerly known as the file called
gmutex.c)
* gthread/testgthread.c: Removed. The new and much extended
tests are in ../tests/thread-test.c.
* gthread/Makefile.am: Changed to reflect the changes above.
* glib.h (Win32): Map fileno to _fileno for mingw32. Map fstat to
_fstat.
* README.win32: Advice also to remove -lmoldname from the
patch to the egcs-1.1.2 spec file patch.
* Makefile.am tests/Makefile.am: Correct rules for making the
win32-related files that are made from corresponding .in files.
Is there a cleaner way than explicitly writing rules that invoke
config.status?
Sat May 8 01:52:29 CDT 1999 Shawn T. Amundson <amundson@gtk.org>
* configure.in
gerror.c
gmain.c
gstrfuncs.c
gutils.c
ltconfig
ltmain.sh
gmodule/Makefile.am
gmodule/gmodule.c
gmodule/gmoduleconf.h.in
gmodule/gmodule-beos.c
gthread/Makefile.am: Port to BeOS by myself and Richard Offer.
* makefile.msc.in makefile.cygwin.in glibconfig.h.win32.in
config.h.win32.in tests/makefile.msc.in tests/makefile.cygwin.in:
New files, used to generate corresponding non-.in files when
making a dist. This is just so the version numbers will be kept in
synch automatically.
* configure.in: Also substitute @GLIB_MAJOR_VERSION@,
@GLIB_MINOR_VERSION@, and @GLIB_INTERFACE_AGE@.
* Makefile.am tests/Makefile.am: Also distribute makefile.cygwin.
* gerror.c (g_on_error_query): On Win32, put up a MessageBox and
then exit.
* glib.def: Add a couple of functions.
* README.win32: More editing.
* build-dll: Use gcc, not ld to link.
* glib.h: On native Win32 use _unlink().
* gscanner.c: Use corrent NATIVE_WIN32 feature test macro,
not _MSC_VER.
* gstring.c: Include <io.h> on Win32 for _read prototype.
* gutils.c: Remove old IO channel code (was in #if 0).
* makefile.cygwin: Don't need to link with kernel32 and msvcrt
explicitly, they are included anyway.
i.e. gcc -mno-cygwin on cygwin (a.k.a. mingw32, using egcs-1.1.2).
* README.win32: Updated.
* build-dll makefile.cygwin tests/makefile.cygwin: New files.
* glib.h glib.def glibconfig.h.win32 makefile.msc: Slight updates.
* gmain.c: No need to include <fcntl.h> and <io.h> on Win32.
* gmain.c gutils.c testglib.c tests/string-test.c: Test for
NATIVE_WIN32, not _MSC_VER.
* gmutex.c: Must declare g_thread_functions_for_glib_use as
exported (using the GUTILS_C_VAR macro).
* gutils.c gmodule/libgplugin_[ab].c: LibMain not needed.
* gmodule/gmoduleconf.h.win32: Need underscore with gcc.
* gthread/gthread.c: With gcc on Win32, must use memcpy to assign
value of g_thread_functions_for_glib_use (?).
* makefile.msc tests/makefile.msc: Cosmetics.
1999-04-22 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gutils.c (g_get_any_init): use sysconf (_SC_GETPW_R_SIZE_MAX) as
the new initinal bufsize for getpwuid_r on systems, that support
this. Hint from Holger Duerer <H.Duerer@zait.uni-bremen.de>.
Sat Apr 17 20:55:13 BST 1999 Tony Gale <gale@gtk.org>
* glib.h, gstring.c: Add new g_string functions for reading
from file/socket descriptors, and tokenising strings.
Added various g_string macros.
* README.win32: Mention the tests directory.
* glib.def: Add the functions from grand.c.
* glibconfig.h.win32: Add unsigned max values, and the format
strings.
* makefile.msc: Add grand.
* tests/{date-test,node-test}.c: Include <stdlib.h> for exit().
* tests/makefile.msc: New file.
1999-04-12 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib.h: Moved struct declaration up. Style fixes.
* grand.c: Style fixes. Only try to open /dev/random once.
* tests/rand-test.c (main): New tests; Slight bug fix.
1999-04-09 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* grand.c, tests/rand-test.c: New files to implement the Mersenne
Twister Pseudo Random Number Generator.
* glib.h, AUTHORS, Makefile.am, tests/Makefile.am: Changed
accordingly.
1999-03-30 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Added a check for the right format to printf and
scanf long longs. It is %qi instead of %lli on FreeBSD for
whatever reason.
* Makefile.am (glibconfig.h): Make sure `glibconfig.h' exists
after the rule is fired.
(install-exec-local): Install glibconfig.h only if the contents
are different from the currently installed glibconfig.h.
* config.h.win32: Update version numbers.
* glibconfig.h.win32: Update version numbers and pthreads-win32-
related magic values.
* README.win32: Some improvements.
* makefile.msc: Add gqueue and gstack. Correct version number.
1999-03-18 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: added new AC_SUBST(GTHREAD_COMPILE_IMPL_DEFINES)
to hold various defines to get the right thread implementation on
different platforms. Also look in -ldce for pthread_create. Should
make it work on HP-UX 10.x.
* gthread/Makefile.am (INCLUDES): Added @GTHREAD_COMPILE_IMPL_DEFINES@.
1999-03-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Added missing values for G_MAXU(SHORT|INT|LONG) on
platforms with only /usr/include/values.h.
* acconfig.h: Removed unnecessary macros.
* glibconfig.h.win32, config.h.win32: Moved G_THREADS_IMPL_POSIX
from config.h.win32 to glibconfig.h.win32. Taken from glib 1.2
branch.
* configure.in: Also accept _Pctime_r instead of ctime_r, while
seraching for the right `_REENTRANT' flag. This is for Digital
UNIX 4.0d. Taken from glib 1.2 branch.
Wed Mar 17 01:46:28 1999 Tim Janik <timj@gtk.org>
* merges from glib-1-2:
Sun Mar 14 17:50:35 1999 Tim Janik <timj@gtk.org>
* gmem.c (g_mem_chunk_*): changed a bunch of g_assert() statements
to g_return_if_fail().
(g_mem_profile):
(g_mem_chunk_print):
(g_mem_chunk_info): removed some extraneous "\n"s at the end of the log
messages.
* gtimer.c (g_timer_*): changed a bunch of g_assert() statements
to g_return_if_fail().
* grel.c (g_*): changed a bunch of g_assert() statements to
g_return_if_fail() and added some extra ones to check relation != NULL.
Tue Mar 9 23:25:50 1999 Tim Janik <timj@gtk.org>
* configure.in: check for working realloc (NULL,).
* gmem.c (g_realloc): use malloc() for initial allocation on systems
where realloc(NULL,) will not work (this is the case on SunOS, reported
by Tom Geiger).
Mon Mar 8 07:42:08 1999 Tim Janik <timj@gtk.org>
* ghook.c (g_hook_unref): when !hook_list->is_setup, wrap the
flag around the call to g_hook_free() to avoid spurious
warnings (happens during destruction phase).
1999-03-02 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gmem.c: Fixed a stupid cut'n'paste error of mine. Thanks to
Friedrich Dominicus <Friedrich.Dominicus@inka.de>
1999-03-16 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* tests/type-test.c: Added a test for the
G_(U)?INT(16|32|64)_FORMAT and G_(MIN|MAX|MAXU)(SHORT|INT|LONG)
macros.
1999-03-16 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Removed G_(U)?INT8_FORMAT again, as it can't be
used for scanf.
* configure.in: Added the macros G_MAXU(SHORT|INT|LONG). I do not
know how to handle these on platforms with /usr/include/values.h,
but without /usr/include/limits.h. Please someone add this.
1999-03-15 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Added the macros G_(U)?INT_(8|16|32|64)_FORMAT to
use for printf and (much more important) scanf format strings for
the corresponding GLib types.
* glib.h Added G_(U)?(SHORT|INT|LONG)_FORMAT for consistency. It
however makes no sense to also provide G_(FLOAT|DOUBLE)_FORMAT, as
they are different for printf (f for both) and scanf (f for float,
lf for double). Defining G_INT_FORMAT makes sense however, as we
might want to define gint to something different than int someday
in the future. Idea from Sascha Brawer <sb@adasys.ch>.
1999-03-14 Jeff Garzik <jgarzik@pobox.com>
* gdate.c:
Commented out debugging output.
* tests/Makefile.am, tests/date-test.c:
Added test of the GDate module, based closely on testgdate.c.
* tests/Makefile.am:
Bugfix - compile tests with @GLIB_DEBUG_FLAGS@.
* configure.in (glibconfig.h): Remove widechar tests and defines.
(fd_set): Change the grep for `fd_mask' to search for `fd_set'.
* gerror.c (fd_mask): Remove conditional typedef. It is not used
elsewhere in the file.
* gmain.c (fd_mask): Likewise.
1999-03-12 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Test for posix threads first, then for dce threads.
* gthread/gthread-posix.c (g_private_get_posix_impl): Fixed
typo for DCE implementation.
1999-03-11 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Revamped the thread configure stuff. Now dce
threads (old posix draft) are recogniced. This is necessary,
because dce threads are in fact working quite differently from
posix threads. Also changed the conditions for checking for MT
safe functions a bit, because G_THREADS_IMPL_NONE still have to
compile thread safe.
* gthread/gthread-posix.c: Now handle both dce and posix
threads. They are sufficently equal.
NOTE: Please do not commit my change to
glib-1-2/{acconfig.h,configure.in,config.h.win32} from 1999-03-03, as
the current change will take care of that too.
1999-03-01 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gutils.c (g_get_any_init): Fixed yet another bloody
implementation of getpwuid_r. This time for AIX. Thanks to Olaf
Dietsche <olaf.dietsche+list.gtk@netcologne.de>. I would like a
configure test better than that, but have no idea, how to do that
easily.
Sat Feb 27 01:18:47 1999 Tim Janik <timj@gtk.org>
* ChangeLog: moved old ChangeLog to ChangeLog.pre-1-2, and started
new one.
* configure.in: set glib version to 1.3.0.
Wed Feb 24 00:08:42 CST 1999 Shawn T. Amundson <amundson@gtk.org>
* *.[ch]: inserted additional note to look for ChangeLog and
AUTHORS file for a log of modifications.
Thu Feb 18 08:24:12 1999 Tim Janik <timj@gtk.org>
* gmem.c (g_realloc): plugged a memory leak, reported by Koen D'Hondt
<ripley@xs4all.nl> on 15 Oct 1998. allocate inital block from realloc.
1999-02-15 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib.h, glibconfig.h.win32, configure.in: Changed signature of
all g_static_mutex_* functions to take a pointer rather than the
struct itself. This is not an issue at the moment, because those
funcs are really macros, but is it un'G'ish and might fall on our
feet in the future.
* gthread/testgthread.c (test_mutexes): Use new signature of
g_static_mutex* functions.
Wed Feb 10 12:06:30 1999 Tim Janik <timj@gtk.org>
* gmodule.c (CHECK_ERROR): be more descriptive on unsupported systems.
Wed Feb 10 12:01:42 1999 Tim Janik <timj@gtk.org>
* configure.in: don't reset G_MODULE_IMPL, so it can be overridden
from the command line.
Wed Feb 10 07:56:33 1999 Tim Janik <timj@gtk.org>
* gmodule.c (g_module_error): fixed errernerous code wrt to thread
specific error string allocation handling.
Wed Feb 10 06:20:30 1999 Tim Janik <timj@gtk.org>
* gmutex.c (g_static_private_set): invoke destroy notifier when
overwriting values, initialize new array fields with NULL.
(g_static_private_free_data): do not skip destroy notification for
data == NULL.
* gutils.c (g_direct_equal): compare pointer values directly instead
of just their guint values which is a loosing conversion for
sizeof(gpointer)==8 systems.
(g_get_any_init): restructured code so we don't use endless loops like
while (1), which boil down to an ugly alias for goto.
strip ,.* from the real name.
1999-02-08 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in, acconfig.h: Changed the test for getpwuid_r to
exclude those systems (i.e. IRIX), that set ENOSYS after the call.
Test, if pthread_getspecific is posix like or something different,
as on PCThreads.
* gthread/gthread-posix.c (g_private_get_posix_impl): Use the
HAVE_PTHREAD_GETSPECIFIC_POSIX macro to determine, which signature
to use for pthread_getspecific.
Sun Feb 7 21:56:00 1999 Owen Taylor <otaylor@redhat.com>
* gmem.c (g_mem_profile): Copy all elements
of the allocations[] array, including the last.
(Pointed out by "Matthew W. Samsonoff" <mws7323@osfmail.isc.rit.edu>)
1999-02-05 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Make the error message in case of a broken thread
system a bit more informative.
* gutils.c (g_get_any_init): Changed the error logic again, now
only leaving the memory doubling loop, when success is reached or
when the user isn't found or when the buffer is 32k big,
additionally now getpwuid will be run, if getpwuid_r didn't work
out properly. A warning is issued however.
* gmessages.c (g_log_default_handler): (Win32:) Don't call
ensure_stdout_valid (which would open an unneeded console window)
if we're calling a logging function. Define ensure_stdout_valid
as an empty macro on Unix.
* gutils.c (g_get_any_init): (Win32:) Trust HOME first if defined,
then try HOMEDRIVE and HOMEPATH.
Mon Feb 1 19:04:28 1999 Owen Taylor <otaylor@redhat.com>
* gmain.c (g_main_iterate): Release the main_loop
lock around calls to prepare() and check() so
that we are not holding the main loop lock
over user code.
1999-01-30 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Moved the check for MT save function variants
after the determination of the MT cflags and use them there.
1999-01-28 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Simplified configure.in test for posix threads,
systems, that provide /usr/include/pthread.h should also have the
posix thread library. This is to avoid writing down all the tests
twice. New test for thread system on HPUX 11. Info from Matt
Nottingham <matt@sar.dera.gov.uk>.
* acinclude.m4: Xsed isn't valid here, don't use it
* ltmain.sh
* ltconfig: better file magic regexp for Linux libs
* gmodule/Makefile.am: arg, noinst_LTLIBRARIES doesn't make shared
libs, revert my previous change to this file
* docs/texinfo.tex: add it so automake doesn't whine
-Yosh
Wed Jan 27 01:57:19 1999 Tim Janik <timj@gtk.org>
* configure.in (G_MODULE_HAVE_DLERROR): applied patch from Andrej
Borsenkow <borsenkow.msk@sni.de> to also check for dlsym() in system
libraries and -ldl, to catch systems that provide dlopen() in libc
and dlsym() in libdl. this is at least the case for Reliant UNIX
5.44 (labeling itself as SINIX).
1999-01-26 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gdate.c (g_date_set_time): Removed the #warning about MT
unsafety without localtime_r.
* configure.in: Moved it here.
1999-01-25 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Do not use the thread libs, when searching for
some functions, as this might require glib to always be linked
with the thread libs on some platforms.
* gutils.c (g_get_any_init): Don't set errno to zero and use it
only as the error code, if the function returned a value less
0. It might happen, that the call succeeds, even though the errno
is set during the call (i.e. it first looks for a passwd file,
which is not found). Submitted by Michael Natterer
<mitschel@cs.tu-berlin.de>. BTW: Sorry for all the mess with that
`getpwuid_r' change, but it had to be done once.
Sun Jan 24 10:33:30 1999 Tim Janik <timj@gtk.org>
* gutils.c (g_get_any_init): reverted raja's changes, since they leaked
a struct passwd contents buffer and for the rest mostly substituted a
while loop with a bunch of gotos.
restored the getpwuid() code to what we had after my recent clean ups
("Sat Jan 23 02:14:28 1999 Tim Janik"), module yosh's recent changes.
to feature solaris behaviour of directly returning errno, we don't
modify error anymore if it's > 0 and simply reset errno.
don't reset g_home_dir for !NATIVE_WIN32 && !NATIVE_WIN32.
* gutils.c
(g_get_any_init) [HAVE_GETPWUID_R && HAVE_GETPWUID_R_POSIX]:
Hopefully got the error handling for `getpwuid_r' right.
(g_get_any_init) [HAVE_GETPWUID_R && !HAVE_GETPWUID_R_POSIX]:
Fix typo (change `pw == NULL' to `pw != NULL').
Please let this be right :-/.
Sun Jan 24 00:36:22 EST 1999 Jeff Garzik <jgarzik@pobox.com>
* ghash.c:
- Revert previous "fix" (which really just did things a
different way).
- (g_hash_table_remove): Don't need to support multiple values
for a single key.
* tests/hash-test.c:
Add test where hash function always returns a single value.
Add beginnings of tests for g_hash_table_foreach[_remove] and
g_hash_table_remove.
Sat Jan 23 22:45:59 1999 Jeff Garzik <jgarzik@pobox.com>
* ghash.c (g_hash_table_lookup_node, g_hash_table_lookup,
g_hash_table_insert, g_hash_table_remove,
g_hash_table_lookup_extended):
- Fixed bug that overwrote nodes in hash buckets instead of
adding them to the hash bucket node list.
Hash tables now work as advertised.
(g_hash_table_resize):
- Use g_new0 instead of manual init.
- Space out code a bit for readability.
(g_hash_nodes_destroy):
- Replaced "if (!hash_node) return;" with
"if (hash_node) {do stuff}".
Testing takes up less code space than explicit call to
'return' before end of function. (look at gcc -S)
Updated module header copyright to 1999.
New module macro G_HASH_BUCKET for (table,key)->bucket lookups.
* tests/hash-test.c:
- Add two new tests, one with strings as the keys and values, and
one with ints as the keys and values. Tests indirect (strings)
and direct (ints) hashing.
- Cleanup unused junk left over from testglib.c.
- Converted a g_print call to g_assert_not_reached.
- Updated copyright to 1999.
* testglib.c, tests/string-test.c:
- Init 'tmp_string' var to NULL, silencing uninit-var warning.
Sat Jan 23 02:14:28 1999 Tim Janik <timj@gtk.org>
* gutils.c (g_get_any_init): cleaned up the errno mess for
GETPWUID. we especially don't want to g_error() out here!
the warning for G_THREADS_ENABLED and !HAVE_GETPWUID_R isn't
gcc related.
if !HAVE_PWD_H and !NATIVE_WIN32, g_free the home dir before
resetting it to NULL, why are we doing this anyways?
reordered code a bit so we always provide defaults (except
for g_home_dir).
Thu Jan 21 12:40:11 EST 1999 Jeff Garzik <jgarzik@pobox.com>
* gmodule/gmodule-dl.c (_g_module_build_path):
Add braces to eliminate an ambiguous else warning.
* tests/{Makefile.am, string-test.c, strfunc-test.c}:
Separate string and strfunc tests, working towards goal of
having separate test for each of the GLib modules.
Add a couple GString length tests.
1999-01-21 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gutils.c (g_get_any_init): Changed error handling again, as the
error is not always set in errno, it is the return value on some
systems. What an evil world.
Wed Jan 20 22:09:59 EST 1999 Mandrake <mandrake@mandrake.net>
* configure.in / Makefile.am : made some adjustments for automake 1.4
and autoconf 2.13 (per suggestions made by Raja R Harinath
<harinath@cs.umn.edu>)
Wed Jan 20 20:33:14 EST 1999 Mandrake <mandrake@mandrake.net>
* autogen.sh: automake 1.4 and libtool 1.2d notices.
(maybe I'll write an actual test for automake 1.4 later)
* HACKING: new file
* Makefile.am: since we require automake 1.4 now, ditch the build
top-level first and just use SUBDIRS
* gmodule/Makefile.am: use noinst_LTLIBRARIES instead of overriding
the install rule
-Yosh
Wed Jan 20 20:48:58 GMT 1999 Adam D. Moss <adam@gimp.org>
* gutils.c (g_get_any_init): All gtk apps were broken
here on my setup. I changed the error to a warning to at
least get things limping.
1999-01-20 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gutils.c (g_get_any_init): Use getpwuid_r with the right
signature, if available.
* configure.in, acconfig.h: Test for existance of getpwuid_r and
its signature.
1999-01-19 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Moved test for localtime_r and rand_r to a place
after the determination of the G_THREAD_LIBS and use them for
finding those functions, necessary on systems with a different C
library libc_r for threaded progs, like FreeBSD 2.2.x. Info from
Timur I. Bakeyev <timur@comtat.ru>.
Tue Jan 19 00:44:24 1999 Josh MacDonald <jmacd@axis.hip.berkeley.edu>
* gstrfuncs.c (g_strsignal): The "extern char* sys_siglist"
declaration breaks systems with different declarations, like
mine (FreeBSD). So, I added a configuration variable to decide
whether the declaration is neccesary. Change also appears on
line 275 of configure.in.
Sun Jan 17 17:15:59 1999 Tim Janik <timj@gtk.org>
* gtree.c (g_tree_traverse): removed assertment about rtree->root being
NULL, so this function can be applied to unpopulated trees as well, fix
provided by Simon Kagedal <sika8225@csd.uu.se>.
Sun Jan 17 16:14:03 1999 Tim Janik <timj@gtk.org>
* glib.h (g_error): if !defined (G_LOG_DOMAIN) define G_LOG_DOMAIN as
((gchar*) 0) instead of ((void*) 0) to silence egcs C++ mode, reported
by Seth Alves <alves@hungry.com>.
Sun Jan 17 14:13:52 1999 Tim Janik <timj@gtk.org>
* glib.h: added a define G_HOOK_DEFERRED_DESTROY, to substitute a noop
GHookList.hook_destroy function.
* ghook.c (g_hook_destroy_link): don't really call hook_destroy if it
is G_HOOK_DEFERRED_DESTROY. for the case where we invoke hook->destroy()
we now clean up the hook completely afterwards, i.e. data, func and
destroy are immediately set to NULL and hook_free can't play with that
values anymore.
* gmain.c (g_source_add): set hook_destroy to G_HOOK_DEFERRED_DESTROY,
instead of using an ugly _noop() hack, this is to avoid an uneccessary
function invokation. set hook_free to g_source_destroy_func, this way
we always invoke the destroy notifiers for user_data and source_data
after execution of dispatch(). thus, g_source_destroy_func() will always
be called within the main_loop lock (this wasn't really assured
before), and can release and reaquire the look around destroy notifier
invokation.
Sun Jan 17 05:12:17 1999 Tim Janik <timj@gtk.org>
* configure.in: incremented version number to 1.1.13, bin age 0,
interface age 0.
* glib.h: added hook_destroy member to struct _GHookList.
* ghook.c (g_hook_destroy_link): if the hook_list defines a hook_destroy
function, use that to marshal hook destruction notifiers.
* gmain.c: removed g_source_free_func and added g_source_destroy_func,
which marshalls the user_data and source_data destructors of sources
outside of the main_loop lock.
removed GIdleData struct since its single member callback can be passed
as source_data directly.
added a gboolean return value to all g_source_remove* functions,
indicating whether the source could be removed, because these functions
don't issue warnings upon unseccessful removals themselves. this way at
least the caller gets a chance to warn upon failing removals.
(g_main_iterate): set in_check_or_prepare around calls to check() or
prepare().
(g_main_pending): simply return FALSE if called from within check() or
prepare().
(g_main_iteration): issue a warning if called from within check() or
prepare() and bail out with FALSE.
(g_main_run): likewise.
(g_source_remove_by_funcs_user_data): new function to remove sources by
user data and function table.
(g_idle_remove_by_data): new function to really remove idles only, since
g_source_remove_by_user_data would remove timeouts or other sources as
well.
* README.win32: More text.
* config.h.win32 glibconfig.h.win32: Update to match the
corresponding generated files on Unix.
* makefile.msc: Update with new source files, and gthread
library. Use the compiler flag -MD instead of using -D_DLL and
"/nodefaultlib:libc msvcrt.lib" in the link phase.
* glib.def: Include new functions, drop removed ones.
* glib.h: Add comments about main loop and polling on Win32. (In
general, it's only for the GIMP's use.) Add Win32 IO Channel
functions. Remove the obsoleted old IO Channel stuff (which was
in #if 0 already).
* giowin32.c: New file.
* gmain.c: Include config.h, conditionalize <sys/time.h>
inclusion. Add g_poll implementation for Win32 (only for the
GIMP's needs for now, it's hard or even impossible to be as clean
and generic as on Unix). Implement g_get_current_time on Win32. If
threads aren't supported, don't try to wake up main thread's
loop. On Win32, use a semaphore and not a pipe to wake up the main
loop.
* gmessages.c: On Win32, allocate a console window if the standard
output handle is invalid before writing to stdout, and reopen stdout
to that console window.
* giochannel.c: Conditionalize unistd.h inclusion. Some indentation
cleanup.
* gstrfuncs.c: Include <signal.h>.
* gutils.c: On Win32, also check the HOMEDRIVE and HOMEPATH
environment variables.
* gmodule-dl.c gmodule-dld.c: In
_g_module_build_path, don't add the "lib" prefix and
".so" or ".sl" suffix if already there.
* gmodule-win32.c: Likewise for the ".dll" suffix.
* gthread-posix.c: Conditionalize <sys/time.h> inclusion.
* glib.h: don't use inline for !__GNUC__ case with g_warning,
g_error, and g_message wrappers since some compilers throw
away arguments in this case
-Yosh
1999-01-11 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Find right thread system on DG/UX. Thanks to Marc
J. Fraioli <fraioli@dg-rtp.dg.com> for hint. Finally removed the
stuff for -fstack-check, that didnt work anyway.
1999-01-11 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Test for localtime_r only after including the
right MT enabling CFLAGS (i.e. -D_REENTRANT on most systems).
* gdate.c (g_date_set_time): Emit warning, if no localtime_r
function is available on thread enabled systems. Define ptm only,
if really needed, and assert on it.
* testglib.c:
Make all aux functions static.
* tests/Makefile.am, tests/dirname-test.c, tests/type-test.c:
New tests dirname-test and type-test, from testglib.
* configure.in:
Add checks for vasprintf, localtime_r.
* gdate.c (g_date_set_time):
Use localtime if localtime_r is not available.
* gstrfuncs.c (g_strdup_vprintf):
Use glibc vasprintf if possible; it's a bit faster than using
GLib routines, and makes output code a bit smaller.
* acconfig.h:
Remove HAVE_VSNPRINTF and HAVE_VPRINTF. autoheader picks these
up automatically and puts them in config.h.in.
Thu Jan 7 15:14:08 1999 Owen Taylor <otaylor@redhat.com>
* gmain.c (g_source_free_func): Call the source-specific
free function when the hook is freed not when it
is destroyed; this fixes a bug where a timeout destroyed
from itself would access already freed data.
1999-01-07 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* gutils.c (g_get_any_init): Here we must replace getpwuid by
getpwuid_r, but as I do not know how for now, I just made a FIXME
note ;-)
* gdate.c (g_date_set_time): localtime --> localtime_r to make it
thread safe.
* configure.in: We do not need to check for broken solaris mutex
intitializer any longer. Provide a macro to show the used thread
implementation. Not nice, but this is needed until thread support
is completed here inside glib.
* gthread/testgthread.c: conditionally compile according to the
G_THREADS_IMPL_??? macros.
(test_private_func): use rand_r instead of rand to make it
thread safe.
Mon Jan 4 20:58:50 1999 Tim Janik <timj@gtk.org>
* gscanner.c: eliminated extraneous "register" qualifiers in variable
declarations.
* gmain.c: #undef events and revents which may have been defined in
sys/poll.h for SVR3,4 compatibility on some AIX systems. fix been
provided by Philippe Defert <Philippe.Defert@cern.ch>.
Mon Jan 4 14:38:11 1999 Tim Janik <timj@gtk.org>
* glib.h: adjusted the g_strdup_a, g_strndup_a and g_strconcat3_a macros
so their arguments get only evaluated once. changed g_strconcat3_a to
have the same semantics as g_strconcat, i.e. if a certain argument is
NULL, the rest of the parameter list is skipped.
* tests/alloca-test.c: removed #if/#endif G_HAVE_ALLOCA, we need to be
able to compile on all systems. added test for g_strconcat() semantics.
* we need a alloca() replacement for !G_HAVE_ALLOCA rsn!
Mon Jan 4 02:58:13 CST 1999 Shawn T. Amundson <amundson@gtk.org>
* Released GLib 1.1.12
* INSTALL:
NEWS:
README:
configure.in:
glib.spec:
docs/glib-config.1: version=1.1.12
* tests/Makefile.am: fixed so it works properly with
builddir and srcdir.
* tests/Makefile.am:
add array-test.c
* tests/array-test.c:
New module, tests array family
* tests/hash-test.c, tests/list-test.c, tests/slist-test.c,
tests/string-test.c, tests/node-test.c:
Clean out cruft left over from testglib.
Sat Jan 2 02:20:59 1999 Tim Janik <timj@gtk.org>
* ghook.c:
(g_hook_list_invoke):
(g_hook_list_invoke_check):
(g_hook_list_marshal_check):
(g_hook_list_marshal): avoid unneccessary extra hook referencing (the
explicit hook referencing became unneccessarry with my changes from
Mon Dec 21 21:48:29 1998).
* gmain.c (g_main_iterate): fixed reference counting leaks with
premature loop aborts.
Fri Jan 1 22:47:44 1999 Tim Janik <timj@gtk.org>
* gscanner.c (g_scanner_unexp_token): handle G_TOKEN_IDENTIFIER_NULL
as G_TOKEN_IDENTIFIER.
* configure.in, glib.h:
Added two new alloca-based function macros, g_strdup_a and
g_strconcat_a. These are stack-based and much faster than
their g_malloc-based counterparts. Kudos to Ulrich Drepper
for help on this one.
* acglib.m4
* configure.in: provide defaults for POLL sysdefs, simple enums
don't work with bitwise logic. Reported by Daniel Skarda
<0rfelyus@atrey.karlin.mff.cuni.cz>
-Yosh
Wed Dec 23 04:18:11 1998 George Lebl <jirka@5z.com>
* gmain.c: (g_get_current_time) don't cast to timeval since
timeval is for some reason not always a struct of longs, weird
Mon Dec 21 21:48:29 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gmain.c: there was a reference count race for hooks during invocation
loops. since all (known) hook loop implementations, do currently start
out with g_hook_first_valid() and iterate with g_hook_next_valid(),
g_hook_first_valid() will now return a referenced hook, and
g_hook_next_valid() will "eat" that, and eventually transfer it to
the next hook. <sigh> unfortunately this requires g_hook_next_valid()
to take the hook_list as additional argument.
* gmain.c (g_main_iterate): adjusted callers of g_hook_next_valid().
Mon Dec 21 03:48:04 1998 Tim Janik <timj@gtk.org>
* gmain.c (g_main_iterate): default initialize source_timeout with -1
so we have a sane timeout value if (*prpare) doesn't set it.
Sat Dec 19 16:56:02 1998 Owen Taylor <otaylor@redhat.com>
* gmain.c (g_main_poll): Allocate space for pollfd's
_after_ adding poll wake-up-pipe record.
* gmain.c (g_main_add_poll): Changed name
of internal function g_main_add_poll_unlocked()
back from the non-sensical g_main_add_unlocking_poll().
Sat Dec 19 06:25:55 1998 Tim Janik <timj@gtk.org>
* glib.m4: fixed a minor bug that would let configures bail out
if the MODULES argument contained newlines.
* acglib.m4: new file to be included by configure.in. it holds
special GLIB_ autoconfiguration macros, eventually some of the
easier ones should be moved into glib.m4, e.g. GLIB_IF_VAR_EQ,
GLIB_STR_CONTAINS or GLIB_ADD_TO_VAR.
1998-12-18 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in (have_threads): Changed the last pthread_cond_init
to pthread_attr_init.
1998-12-18 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* testgthread.c (new_thread): As a joinable thread seems to be the
default on posix, leave the explicit setting out, as it causes
problems on some older platforms.
Fri Dec 18 00:03:17 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gmain.c:
(g_main_is_running): new function to check whether a main loop has been
quitted.
(g_main_new): added a gboolean argument to determine whether the loop
should be considered initially running or not. however, g_main_run ()
will still reset the main loops running state to TRUE upon initial
entrance.
* gmain.c:
(g_main_iterate): documented this function's purpose in 5 steps.
for step 2), flag sources as G_SOURCE_READY even if !dispatch and
check G_SOURCE_READY prior to (*prepare), so we don't call (*prepare)
on them multiple times.
Thu Dec 17 23:43:47 1998 Tim Janik <timj@gtk.org>
* gmain.c (g_main_add_poll): reordered arguments, so GPollFD* comes
first, <sigh> (sorry Snorfle, i should have let you know in the first
place).
(g_main_dispatch): stack G_HOOK_FLAG_IN_CALL flags. call source's
destructor when destroying a source.
1998-12-17 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* garray.c (g_ptr_array_remove_index): Fixed size in g_memmove,
reported by Alexander Larsson <alla@lysator.liu.se>.
* gmem.c: Fixed bug, that made compile fail for -DENABLE_MEM_PROFILE.
Wed Dec 16 22:32:13 CST 1998 Shawn T. Amundson <amundson@gtk.org>
* glib.h:
giounix.c: s/g_main_poll_add/g_main_remove_add/g
s/g_main_poll_remove/g_main_remove_poll/g
s/g_main_poll_add_unlocking/g_main_add_unlocking_poll/g
(from Tim Janik)
* gthread-posix.c: use g_free in mutex_free (from Tim Janik)
Thu Dec 17 04:10:49 1998 Tim Janik <timj@gtk.org>
* glib.h (G_LOCK_DECLARE_*): if !G_THREADS_ENABLED, eat the
trailing semicolon with a bogus function declaration, instead
of with a bogus variable declarations, so we avoid unused
variable warnings.
1998-12-16 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* docs/glib-config.1: Updated to reflect the existence of gthread.
* gmain.c (g_main_poll_add_unlocking): Changed
g_main_poll_add_unlocked to g_main_poll_add_unlocking to match
semantic, (indeed, main_loop must be locked, when calling this
function). Removed the unlocking from the end of that function, as
that is not right. Made a 'HOLDS' comment above the function.
Wed Dec 16 03:16:58 1998 Tim Janik <timj@gtk.org>
* configure.in: version bump to 1.1.8, binary age 0, interface age 0.
* glib.h: changed g_lock() to G_LOCK(), g_unlock() to G_UNLOCK() and
g_trylock() to G_TRYLOCK(), since these are macros that expand to
nothing with --disable-threads.
changed G_LOCK_DEFINE() to G_LOCK_DECLARE() and introduced
G_LOCK_DECLARE_STATIC() to achive the results of static G_LOCK_DECLARE().
changed semantics of g_thread_supported to g_thread_supported() so it
can be used as a function like g_module_supported(). the actuall
definition is still a macro that expands into a variable for
performance reasons though.
various indentation and coding style cleanups.
* configure.in: added --enable-threads that defaults to yes.
* gmutex.c: changed tests g_thread_supported to g_thread_supported (),
changed variable settings of g_thread_supported
to g_threads_got_initialized.
garray.c:
gcache.c:
gdataset.c:
gdate.c:
ghash.c:
glist.c:
gmain.c:
gnode.c:
gslist.c:
gstring.c:
gtree.c:
gutils.c:
changed s/g_lock/G_LOCK/, s/g_unlock/G_UNLOCK/,
s/static G_LOCK_DEFINE/G_LOCK_DECLARE_STATIC/.
Tue Dec 15 17:17:46 1998 Owen Taylor <otaylor@redhat.com>
* glib.h giounix.c giochannel.c: Use an "inheritance"
scheme for IO channel memory allocation.h
1998-12-15 Havoc Pennington <hp@pobox.com>
* gdate.c (g_date_prepare_to_parse): Solaris has a broken strftime
that produced garbage output for the test date I was using to
set up the parser. So use a different date that Solaris seems
to like.
1998-12-15 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: Dont complain, if --without-threads or
--with-threads=none is supplied; Test for pthread_attr_init
instead of pthread_cond_init, if threads seems to be supported by
standard glib. (CFLAGS): Use G_THREAD_CFLAGS for compiling of glib
as well.
* glib.h, gmutex.c: Changed private to private_key to avoid
problems when compiling with under C++.
Tue Dec 15 10:40:09 1998 Owen Taylor <otaylor@redhat.com>
* gnode.c glist.c gslist.c: Make sure all
calls to g_node_validate_allocator are within
current_allocator lock, so we have consistency
on that point. (Should not really matter,
but this way we match the comments)
* glist.c (g_list_free_1): Removed some lines
that should never have been committed. (For
debugging)
branch. See the ChangeLog for details of the changes.
In brief overview:
- The set of threading functions can be set
- A default implementation is provided in -lgthread
- All static data structures are locked using these
functions if g_thread_init() is called.
Sat Dec 12 19:08:59 1998 Tim Janik <timj@gtk.org>
* configure.in: always define G_HAVE_INLINE if __cplusplus is
defined, reported by Wan-Teh Chang <wtc@netscape.com>.
Thu Dec 10 21:49:39 CST 1998 Shawn T. Amundson <amundson@gtk.org>
* Released GLib 1.1.7
* INSTALL:
NEWS:
README:
configure.in:
glib.spec:
docs/glib-config.1: Increased version to 1.1.7
1998-12-02 Havoc Pennington <hp@pobox.com>
* gdate.c (g_date_set_month): If Julian is valid, we have to
update the dmy representation before setting the components
of it.
(g_date_set_day): Same.
(g_date_set_year): Same.
1998-12-02 Havoc Pennington <hp@pobox.com>
* testgdate.c, testgdateparser.c: Two new files. This is kind of
ugly code, but I want to go ahead and make the tests available.
It isn't contaminating any other code. :-) Since one of these
is interactive and the other takes a while to run, I've kept
them separate from testglib for now.
* Makefile.am: Build gdate test programs.
someone does the necessary updates.
Sat Nov 28 12:53:47 1998 Owen Taylor <otaylor@redhat.com>
* Makefile.am configure.in acconfig.h giochannel.c
glib.h glist.c gmain.c gutils.c:
- Revised GIOChannel to provide a generic virtual-function
based interface.
- Added unix fd-based GIOChannel's
- Added generic main-loop abstraction
- Added timeouts and idle functions using main-loop abstraction.
1998-12-02 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib.h:
* gdate.c: changed `gpointer struct_tm_p' parameter of
g_date_to_struct_tm back to `struct tm *tm' and forward declared
`struct tm' in glib.h; yes, this is nice, we still need not
include time.h.
Wed Dec 2 02:10:59 1998 Tim Janik <timj@gtk.org>
* gdate.c: s/time_t/GTime/ and s/g_print/g_message/
include time.h.
* glib.h: removed #include <time.h>, changed time_t paramter of
g_date_set_time() to time_t, changed struct tm parameter of
g_date_to_struct_tm to `gpointer struct_tm_p'. yes, this is not
nice, but including time.h actually breaks a bunch of code.
this breaks something let me know and I will fix it.
1998-11-30 Havoc Pennington <hp@pobox.com>
* gdate.c: New file, implements calendrical calculations.
* glib.h: Added declarations for GDate module.
Mon Nov 30 07:12:10 1998 Tim Janik <timj@gtk.org>
* glib.h:
* ghook.c: added g_hook_list_marshal_check() to eventually destroy
hooks after they got marshalled.
Thu Nov 26 01:36:20 1998 Tim Janik <timj@gtk.org>
* glib.h:
* ghash.c: reverted the g_hash_table_set_key_freefunc() addition,
since it's to specialized and needs to be resolved in a generic
fashion.
Tue Nov 24 18:57:59 PST 1998 Manish Singh <yosh@gimp.org>
* applied glib-tml-981120-0, change log appended below.
* glibconfig.h.win32: passthrough 64-bit constants unchanged, VC++
infers them
Fri Nov 20 22:26:43 1998 Tor Lillqvist <tml@iki.fi>
* glib.h: Moved MSC pragmas from glib.h to glibconfig.h.win32.
peer_offset field in WIN32 part of GIOChannel removed, need_wakeups
added. Added "extern" to __declspec(dllimport).
* gutils.c: Initialise need_wakeups.
* glibconfig.h.win32: Pragmas moved here. Define G_GINT64_CONSTANT.
* gmodule/gmodule.def: Added g_module_build_path.
* gscanner.c: (g_scanner_cur_value) Move initailisation of v
to before its use.
* glib.def: Added g_(s)list_sort.
* makefile.msc: A few more comments.
-Yosh
Tue Nov 24 14:05:47 EST 1998 Michael K. Johnson <johnsonm@redhat.com>
* glib.h: added GFreeFunc and g_hash_table_set_key_freefunc()
prototype.
* ghash.c: added g_hash_table_set_key_freefunc() implementation.
Modified the prototypes of the functions g_hash_node_destroy() and
g_hash_nodes_destroy(), and changed the functions that call them
to match the new definitions.
This changes no external interfaces, and should create no binary
or source incompatibilities. It does add a member to the
GHashTable structure.
Tue Nov 24 09:40:00 1998 Tim Janik <timj@gtk.org>
* glib.h: removed the GListAllocator type and its g_*_allocator_*()
function variants (which weren't working anyways) in favour of a
generic GAllocator type. new functions:
g_allocator_new, g_allocator_free, g_slist_push_allocator,
g_slist_pop_allocator, g_list_push_allocator, g_list_pop_allocator,
g_node_push_allocator and g_node_pop_allocator.
* gstring.c: removed bogus slist allocator code.
* gtree.c: maintain own list of free tree nodes and don't waste
GSLists for that, removed bogus slist allocator code.
* glist.c: use GAllocators for node allocation.
* gslist.c: use GAllocators for node allocation.
* gnode.c: use GAllocators for node allocation.
* gdataset.c: cleanups wrt automatic initialization.
Mon Nov 23 10:03:58 1998 Owen Taylor <otaylor@gtk.org>
* glib.h garray.[ch]: added g_array_insert_vals() to
insert elements at an arbitrary index, and
g_array_insert_val() macro.
Sun Nov 22 17:07:03 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gslist.c: new function g_slist_copy() to duplicate a list with all its
data pointers.
* glist.c: new function g_list_copy.
Sat Nov 21 14:57:39 CST 1998 Shawn T. Amundson <amundson@gtk.org>
* INSTALL:
NEWS:
README:
configure.in:
glib.spec: Updated to version 1.1.5
* Released GLib 1.1.5
Mon Nov 16 07:48:06 1998 Tim Janik <timj@gtk.org>
* glib.h (g_bit_nth_msf): fixed off-by-one error, so we don't waste
a loop iteration if (-1) was passed, reported by Andreas Bombe
<andreas.bombe@munich.netsurf.de>.
Fri Nov 13 15:17:34 1998 Owen Taylor <otaylor@redhat.com>
* glist.c gslist.c glib.h: Added g_list_sort() and
g_slist_sort() to merge sort GLists and GSLists.
Submitted by Sven Over <sven.over@ob.kamp.net>
over a year ago!
* testglib.c: Test the new sort functions.
INCLUDES is the right way to add to CFLAGS, not DEFS.
Also there are bugs with '+=' in makefiles.
Got rid of DEFS line by moving G_LOG_DOMAIN setting into INCLUDES.
Removed redundant -I from INCLUDES.
This fixes an annoying bug where autoconf's DEFS, which includes
the important -DHAVE_CONFIG_H, was lost. (due to += weirdness)
Wed Nov 11 18:11:24 EST 1998 Gregory McLean <gregm@comstar.net>
* docs/*.sgml : Batch of new documentation that should be easier
to maintain and extend. Plus generate whatever sort of doc file
you would like. I didn't change the Makefile stuff as I'm not sure
what default doc type people want. Oh and this is all DocBook format.
Enjoy!
* configure.in: use __extension__ for long long on gcc >= 2.8 and
egcs, and provide a G_GINT64_CONSTANT wrapper so -ansi -pedantic
compiles clean.
* glib.h: make the endian x86 asm __const__ so the compiler can do
better optimizations. Also remove the cc clobber, these shouldn't
be changing condition codes. Ditch some redundant casts. Add an
optimization for 64-bit endian conversions in x86. Use constant
wrapper for the generic method.
* testglib.c: use constant wrappers for 64-bit constants
-Yosh
1998-11-04 Phil Schwan <pschwan@cmu.edu>
* configure.in: Added 'strncasecmp' to the list of functions to be
searched for.
* glib.h: Added a prototype for 'g_strncasecmp'
* strfuncs.c: (g_strncasecmp) new function modeled closely after
'g_strcasecmp'
1998-11-03 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* glib.h:
* garray.h:
(g_array_remove_index): new function for removing an entry from an
array while preserving the order
(g_array_remove_index_fast): new function for removing an entry
from an array. the order might be distorted
(g_ptr_array_remove_index_fast, g_ptr_array_remove_fast): new
functions; working similiar to the above. (they have the semantic
of the old g_ptr_array_remove[_index] functions)
(g_ptr_array_remove_index, g_ptr_array_remove): new semantic. now
the order of the elements in the array is not changed
(g_byte_array_remove_index, g_byte_array_remove_index_fast): new
functions; byte_array wrapper for g_array_remove_index[_fast]
* glib.h
* configure.in: endian macros defined using the glibconfig.h mechanism now
* ghook.c: casts for GHookFunc and GHookCheckFunc to avoid warnings
-Yosh
* applied glib-tml-981101-1 patch from Tor Lillqvist (ChangeLog
entry appended below)
* testglib.c
* gstrfuncs.c
* glib.h: use G_HAVE_GINT64, since HAVE_GINT64 is gone
* gmessages.c
* gscanner.c: #include <config.h> in here too, for HAVE_UNISTD_H
-Yosh
* Makefile.am (glibconfig.h): New rule.
(stamp-gc-h): New rule. Generate `glibconfig.h'.
* configure.in (AM_CONFIG_HEADER): It is now `config.h'.
(HAVE_BROKEN_WCTYPE): On Solaris, look for iswalnum in -lw before
concluding "broken wctype".
(glibconfig.h): Use AC_OUTPUT_COMMANDS to put generation code into
config.status.
* glib.h: Remove a lot of tests and defines. All these have been
moved to `configure.in (glibconfig.h)'.
* gerror.c: Include <config.h>.
* gmem.c: Likewise.
* gstrfuncs.c: Likewise.
* gutils.c: Likewise.
This could cause some short term instability.
Sat Oct 31 05:08:26 1998 Tim Janik <timj@gtk.org>
* glib.h: removed old G_ENUM(), G_FLAGS(), G_NV() and G_SV() macros.
added macros G_STRUCT_OFFSET(), G_STRUCT_MEMBER_P() and
G_STRUCT_MEMBER() for handling structure fields through their offsets.
(struct _GHookList): added a hook_free function member, that can be used
to free additional fields in derived hook structures.
g_hook_free(): if hook_list->hook_free != NULL, call this function prior
to freeing the hook. (this functionality should have been there in the
first place, it just got forgotten as an implementation detail).
Tue Oct 27 07:25:53 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gscanner.c:
(g_scanner_sync_file_offset): new function for file input.
rewind the filedescriptor to the current buffer position and blow
the file read ahead buffer. usefull for third party uses of our
filedescriptor, which hooks onto the current scanning position.
(this became neccessary with the implementation of buffered
reads).
(g_scanner_input_file):
(g_scanner_input_text): automatically blow the read ahead buffer.
(g_scanner_get_char): blow the read ahead buffer when the end of
input is reached, i.e. a '\000' char is read.
* glib.h: reimplemented the endian stuff, using inline asm for x86.
#define g_htonl and friends.
* testglib.c: new tests for the endian stuff
* configure.in: care for AIX in gmodule linker flags test (from Joel Becker
<jlbec@raleigh.ibm.com>). Check $host_os for linux instead of existance of
/usr/include/linux
* gutils.c: buh-bye evil warning. Thou hast been #ifdef'd out of thine
existance!
-Yosh
Tue Oct 27 03:00:50 1998 Tim Janik <timj@gtk.org>
* glib.h: removed dummy structure definitions for struct _GCache,
_GTree, _GTimer, _GMemChunk, _GListAllocator and _GStringChunk.
* gutils.c: implement glib's inline functions _after_ all include
statements have been processed.
removed Tor's MAXPATHLEN check since there already was one supplied
further down in this file.
(LibMain): special cased the #ifdef __LCC__ case for NATIVE_WIN32,
since lcc maybe used on other platforms as well. why in hell is this
stuff required?
(g_get_any_init): for windows, if the user name is supplied, use it as
realname also.
in general, if there is no homedir specified, use the tmpdir that
we already figured.
* gtimer.c (g_timer_elapsed): changed a g_assert() statement to
g_return_if_fail().
* applied glib-tml-981020-0.patch for WIN32 portability, added some
comments and g_return_if_fail() statements, minor indentation fixes.
ChangeLog entry from Tor Lillqvist is appended.
* glib.h (struct dirent): use lower case structure members.
* glib.h:
* makefile.lcc:
* makefile.msc:
s/COMPILING_GLIB/GLIB_COMPILATION/
1998-10-20: Tor Lillqvist <tml@iki.fi>
* README.win32 glib.def gmodule.def
* glibconfig.h.win32 gmodule/gmoduleconf.h.win32:
New files for the Windows port. The .def files list exported
symbols for the Microsoft linker and compatibles.
* configure.in:
Added checks for some platform-dependent headers: pwd.h sys/param.h
sys/select.h sys/time.h sys/times.h unistd.h, and the function lstat.
* gerror.c:
Conditionalized inclusion of system-dependent headers. Changes
for Windows: no gdb to do a stack trace. Just call abort().
* glib.h:
Changes for Windows:
Added macros G_DIR_SEPARATOR, G_DIR_SEPARATOR_S for
platform-dependent file name syntax elements. Added macros
G_SEARCHPATH_SEPARATOR, G_SEARCHPATH_SEPARATOR_S for
platform-dependent search path syntax conventions.
Added pragmas for Microsoft C to make it more pedantic.
Marked GLib's global variables for export from DLL.
Added the function g_strescape that escapes backslashes.
Added functions g_path_is_absolute and g_path_skip_root to
handle platform-dependent file name syntax.
Added the function g_getenv that expands environment variables
that contain references to other environment variables, as is
typical on Windows NT.
Added the GIOChannel structure which is used to encapsulate the
IPC mechanism used by the GIMP's plug-ins, and possibly other
things later. On Unix a GIOChannel encapsulates just a file
descriptor. On Windows it contains a file handle from _pipe() and a
few other things related to the implementation of gdk_input_add
and GIMP plug-in communication. Subject to change.
Removed duplicate declarations of the version variables.
For the Microsoft compiler, declare own implementation of
ftruncate and the <dirent.h> functions.
* gmem.c:
Define a symbolic name for the profiling table size.
* gmessages.c:
Conditionalized inclusion of unistd.h. On Windows, output using
stdio to stdout.
* gscanner.c:
Conditionalized inclusion of unistd.h. Added changes for
Microsoft C. Added CR to the skipped character set. Added small
workaround for MSC compiler bug in g_scanner_cur_value.
* gstrfuncs.c:
Added the function g_strescape, which escapes the backslash
character. Needed especially when printing Windows filenames.
* gtimer.c:
Conditionalized inclusion of unistd.h and sys/time.h. Added
implementations for Windows.
* gutils.c:
Conditionalized inclusion of platform-dependent headers. Use
the platform-independent file name syntax macros.
Conditionalize code on platform-dependent features. Added the
functions g_path_is_absolute g_path_skip_root and g_getenv.
Added the GIOChannel-related functions. Added
compiler-dependent Unix compatibility functions for Windows.
* makefile.lcc makefile.msc:
New files. Compiler-specific makefiles for LCC-Win32 and
Microsoft C. Only Microsoft C is actually supported currently.
* testglib.c:
Added pathname check cases for Windows. Added workaround for
bug in the Microsoft runtime library. Improved some tests a bit.
Tue Oct 27 04:00:11 1998 Tim Janik <timj@gtk.org>
* testgmodule.c (main): changed the #ifdef WIN32 test to NATIVE_WIN32,
this needs to be more constistent throughout the code, do we go for
NATIVE_WIN32 or WIN32?
* gmodule.c (LibMain): special cased the #ifdef __LCC__ case for
NATIVE_WIN32, since lcc maybe used on other platforms as well.
* libgplugin_a.c (LibMain):
* libgplugin_b.c (LibMain):
likewise. not sure i like this special requirement for lcc in here.
* gmodule-dl.c (_g_module_build_path):
feature empty "" directories and prepend the module name with "lib".
* gmodule-dld.c (_g_module_build_path):
* gmodule-win32.c (_g_module_build_path):
feature empty "" directories.
* we need some more magic in the _g_module_build_path variants
so we don't append/prepend lib and .so, .sl or .dll for those names
that already contain it.
* applied patch from Tor Lillqvist for g_module_build_path() and
windows support.
1998-10-20: Tor Lillqvist <tml@iki.fi>
* gmodule/gmodule-win32.c:
New file.
* gmodule/gmodule.c gmodule/gmodule.h:
Added the funcion g_module_build_path that builds the path to
a module file, decorating the name according to the system's
conventions. Added the Windows implementation.
* gmodule/libgplugin_a.c gmodule/libgplugin_b.c:
Added LibMain for LCC-Win32.
* gmodule/testgmodule.c:
Handle Windows dll names.
Sun Oct 25 01:24:01 CST 1998 Shawn T. Amundson <amundson@gtk.org>
* Released GLib 1.1.4
* docs/Makefile.am:
* docs/.cvsignore
* docs/glib-config.1:
* docs/glib.texi: Moved docs from gtk and created glib-config.1
from gtk-config.1 in gtk
* configure.in:
* Makefile.am:
* sanity_check: added in docs directory, change rule 'release'
to 'snapshot' and created a new 'release' rule for doing the
distribution. Added in a 'sanity' rule.
* NEWS:
* README:
* INSTALL: Updated for the release
Sun Oct 25 07:30:10 1998 Tim Janik <timj@gtk.org>
* gscanner.c:
(g_scanner_peek_next_char):
(g_scanner_get_char): no more characters are available if read() returns
anything less than 1, not only on 0 return.
* glib.h:
* gstrfuncs.c: final API cleanup of string arrays to suit sopwith's
argument order requirements.
(g_strsplit): renamed from g_str_array_split().
(g_strjoinv): renamed from g_str_array_joinv(), string array is
now passed as last parameter. removed `const' qualifier from string
array pointer (again).
(g_strjoin): new function from sopwith to concatenate strings with
an additional seperator.
(g_strfreev): renamed from g_str_array_free.
Wed Oct 21 19:22:58 1998 Tim Janik <timj@gtk.org>
* configure.in (G_MODULE_HAVE_DLERROR): reverted part of the changes
from Sebastian Wilhelmi (1998-10-20). don't specify a specific loading
behaviour (i.e. RTLD_NOW) when we are not sure whether it is supplied.
changed the return value from (!f2 && f1) to (!f2 || f1) so we default
to not needing an underscore. reverted the extra plugin.c building,
because .lo files are not ELF libraries, this can't work. This needs
further investigation on Solaris...
Wed Oct 21 19:58:27 1998 Tim Janik <timj@gtk.org>
* gmodule.c (g_module_symbol): fixed a string pointer bug that could
cause garbage error messages from g_module_symbol() for systems that
NEED_USCORE.
Wed Oct 21 17:03:05 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gstrfuncs.c: API cleanups of the new g_str* functions for consistency
with the existing naming scheme for g_str* functions. grouped the g_str*
functions that will return a newly allocated string seperatedly. all of
the in_place arguments were skipped, the caller is supposed to pass a
g_strdup()ed string if he wants to retrive a new copy. indentation and
coding style fixups. added some g_return_if_fail() statements.
string array functions are prefixed with g_str_array_.
(g_strdelimit): return the modified string like all other g_str*
functions, that operate in place.
(g_strchug): renamed from g_str_chug(), removed in_place argument.
(g_strchomp): renamed from g_str_chomp(), removed in_place argument.
(g_strstrip): renamed from g_str_strip(), removed in_place argument.
(g_str_array_join): renamed from g_strconcatv(), since it actually
operates on a string array and has totaly different semantics from
g_strconcat(). check for separator != NULL, don't segfault if the first
string is NULL. removed the `const' from the string array that's passed,
so users can operate on gchar** string arrays.
(g_str_array_split): renamed from g_str_split() because we actually
produce a string array. reimplemented this function for efficiency.
removed macro aliases g_str_joinv and g_str_join.
1998-10-20 Sebastian Wilhelmi <wilhelmi@ira.uka.de>
* configure.in: made the check for needed underscore in module's
func-names work on solaris. (G_MODULE_NEED_USCORE must be set
outside AC_CACHE_VAL, dlopen(0,0) refused to work on solaris).
Thu Oct 8 06:47:27 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gdataset.c: removed functions g_dataset_id_set_destroy and
g_datalist_id_set_destroy and macros g_dataset_set_destroy and
g_datalist_set_destroy.
added new functions g_dataset_id_remove_no_notify and
g_datalist_id_remove_no_notify plus associated macros
g_dataset_remove_no_notify and g_datalist_remove_no_notify, which
will remove a certain data portion without invokation of its destroy
notifier, this should only be used in very controled circumstances.
Wed Oct 7 05:31:24 1998 Tim Janik <timj@gtk.org>
* glib.h:
removed the #pragma } statement after extern "C" {. use
(c-set-offset 'inextern-lang 0) to fixup emacs cc-mode indentation.
* glib.h:
* ghook.c: API and code cleanups. changed the G_HOOK_ACTIVE and
G_HOOK_IN_CALL enum vals to G_HOOK_FLAG_ACTIVE and G_HOOK_FLAG_IN_CALL.
changed the G_HOOK_IS_ACTIVE() and G_HOOK_IS_IN_CALL() macros to
G_HOOK_ACTIVE() and G_HOOK_IN_CALL().
fixed the g_hook_find* functions, so they iterate over non-active
hooks as well.
(g_hook_first_valid):
(g_hook_next_valid): added an extra argument gboolean may_be_in_call,
which indicates whether G_HOOK_IN_CALL() hooks are considered valid
or not. these two functions are meant as iterators for the hook list
invocation, so they need to a) provide functionality to implement
may_recurse bahaviour and b) only walk active hooks.
Tue Oct 6 14:29:47 1998 Tim Janik <timj@gtk.org>
* gmem.c (g_malloc0): fixed memory offsett when ENABLE_MEM_CHECK is
defined and ENABLE_MEM_PROFILE is not (patch from Martin Pool
<mbp@wistful.humbug.org.au>).
Sat Oct 3 01:18:10 1998 Tim Janik <timj@gtk.org>
* glib.h:
* ghook.c:
(g_hook_list_invoke):
(g_hook_list_invoke):
(g_hook_list_marshal): properly handle the first valid hook to call,
it maybe IN_CALL already.
(g_hook_list_marshal): minor name change.
Fri Oct 2 23:21:21 1998 Tim Janik <timj@gtk.org>
* glib.h:
* ghook.c: renamed GHook.id to GHook.hook_id so we don't get troubles
with ObjC which reserves "id" as a keyword (Raja R Harinath
<harinath@cs.umn.edu>).
Fri Sep 25 00:04:37 1998 Tim Janik <timj@gtk.org>
* configure.in: version bump to 1.1.4, binary age 0, interface age 0.
* glib.h (struct _GScanner): dumped peeked_char and text_len in favour
of *text_end and *buffer for buffered read()s.
* gscanner.c: changed peeking and retrival of next character so we
have buffered reads. fixed minor bug with number parsing error
reporting. made some static!!! variables local ones (why did we use
static temporary variables in the lowlevel tokenization code anyways?).
Mon Sep 21 02:22:12 1998 Tim Janik <timj@gtk.org>
* NEWS file update for upcoming release of GLib + GModule
version 1.1.3, binary age 0, interface age 0. (GModule uses
the same version numbers as GLib.)
* glib.h: swap the inclusion of of float.h and limits.h to work
around a egcs 1.1 oddity on Solaris 2.5.1 (fix provided by
Per Abrahamsen <abraham@dina.kvl.dk>).
* glib.h:
* gscanner.c: renamed the GValue union to GTokenValue, this should
not affect source compatibility in most cases.
* ghash.c: added some g_return_if_fail() statements. make
g_hash_table_lookup_node() an inline function so we save an extra
function invokation on lookups.
Mon Sep 21 01:54:48 1998 Tim Janik <timj@gtk.org>
* gmodule.h:
* gmodule.c: renamed old _de_init functionality to _unload.
modules are now expected to export:
G_MODULE_EXPORT const gchar* g_module_check_init (GModule *module);
and
G_MODULE_EXPORT void g_module_unload (GModule *module);
returning a string other than NULL from g_module_check_init() will
prevent the module from being loaded. a call to g_module_make_resident()
from g_module_unload() will prevent the module from being unloaded and
still make it resident.
nothing will break.
* glib.h: New function g_hash_table_foreach_remove is similar to
g_hash_table_foreach, but the callback's return value indicates
whether to remove the element (if TRUE) or not (if FALSE).
Fri Sep 18 18:46:14 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gdataset.c: make the datalists a safe type (not using a generic
gpointer) by expecting a GData* argument in the g_datalist functions.
provide g_dataset_foreach() and g_datalist_foreach() functions that
allow a GDataForeachFunc function to walk the data lists.
(g_dataset_destroy_internal): made this function truely reentrant (i.e.
can be called from within destroy notifiers as well).
the *_foreach functions are _not_ reentrant (unless all the other
dataset and datalist functions).
Thu Sep 17 06:36:25 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gdataset.c: implemented g_datalist_* along the lines of g_dataset,
but operates on an opaque gpointer *datalist; pointer, e.g. for the
implementation of GtkObject named data.
we cache a certain portion of the already freed data entries now, to
gain a slight performance improve with data reallocation.
Thu Sep 17 06:34:22 1998 Tim Janik <timj@gtk.org>
* gmodule.h:
* gmodule.c: implemented g_module_make_resident() which can be
used to make modules resident.
fixed a buglet about the optional "g_module_de_init" function in
modules, which could get invoked twice on very obscure occasions.
Tue Sep 15 14:57:30 1998 Owen Taylor <otaylor@redhat.com>
* Makefile.am glib-config.in l*: Update to libtool-1.2b,
change library versioning scheme to drop LT_RELEASE
from the -l line, while keeping it in the soname.
Fri Sep 11 02:11:46 1998 Tim Janik <timj@gtk.org>
* glib.h: explicitely include the prototypes for inline functions
to cure gcc warnings for -Wmissing-prototypes.
Tue Sep 8 05:04:06 1998 Tim Janik <timj@gtk.org>
* glib.h: abandon the use of ATEXIT(), we keep the fallback
macros for backwards compatibility. people ought to use g_atexit().
* gutils.c (g_atexit): new function to take over the implementation
of ATEXIT. this function is guarranteed to succeed, similar to
g_malloc().
Mon Sep 7 07:53:21 1998 Tim Janik <timj@gtk.org>
* configure.in: check for all three inline keywords individually.
* glib.h: inlining hassle. for compilers that don't allow the `inline'
keyword, mostly because of strict ANSI C compliance or dumbness, we try
to fall back to either `__inline__' or `__inline'.
we define G_CAN_INLINE, if the compiler seems to be actually *capable*
to do function inlining, in which case inline function bodys do make
sense. we also define G_INLINE_FUNC to properly export the function
prototypes if no inlinig can be performed. we special case most of the
stuff, so inline functions can have a normal implementation by defining
G_INLINE_FUNC to extern and G_CAN_INLINE to 1.
* ltconfig: (compiler PIC flag test): special case linux for non
aout systems to honour lcc's position independant code (cases
"linux*aout)" and "linux*)" got added). (this needs to go into
libtool which does an advanced test, checking for __LCC__).
* autogen.sh: take $CC=lcc into account by invoking automake with
--include-deps so lcc isn't scared by gcc's auto-dependancy
generation code. care about $ACLOCAL_FLAGS. optionally feature
autoheader.
* minor fixups in other places to cure some of lcc's warnings.
Sat Sep 5 04:40:02 1998 Tim Janik <timj@gtk.org>
* glib.h:
(g_chunk_new0): use g_mem_chunk_alloc0() to allocate the memchunk,
so the correct size of the memchunk is allocated with 0's and not
a memory portion of the size of the desired type.
* gmem.c: new function g_mem_chunk_alloc0() which will initialize
a memory area allocated with g_mem_chunk_alloc() with 0's.
Wed Aug 26 06:32:40 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gstrfuncs.c: new function g_strnfill() to return a new string
of specified length, filled with a specific character.
Mon Aug 24 02:08:56 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gstring.c:
* gstrfuncs.c:
(g_vsprintf): removed this function which was not publically
exported in glib.h. to export it, it should have been named
differently in the first place, since its semantics differ from
vsprintf(). apart from that, it was a possible cause for
problems since it worked on a previously allocated memory area and
was used in a lot places of glib. exporting it would have been a
guararant for problems with threaded programs.
(g_printf_string_upper_bound): exported this function to return
a string size, guarranteed to be big enough to hold the fully
expanded format+args string. added 'q', 'L' and 'll' flag handling.
in fact, the newly allocated area is in most cases much bigger than
required.
(g_strdup_vprintf()): new function returning a newly allocated string
containing the contents of *format and associated args (size is
calculated with g_printf_string_upper_bound()).
(g_strdup_printf): new function which wraps g_strdup_vprintf().
* configure.in: check for va_copy() or __va_copy() alternatively.
check whether va_lists can be copyied by value.
* glib.h: provide a definition for G_VA_COPY.
* glib.h:
* gmessages.c:
(g_logv):
(g_vsnprintf):
pass va_lists by value, not by reference, since this causes problems
on platforms that implement va_list as as arrays. internaly, use
G_VA_COPY (new_arg, org_arg); va_end (new_arg); to produce a second
va_list variable, if multiple passes are required. changed all
callers.
* glib.h:
* gerror.h:
renamed g_debug() to g_on_error_query(), cleaned up a bit.
renamed g_stack_trace() to g_on_error_stack_trace() since both
functions cluttered different namespaces.
there is an appropriate comment in glib.h now that explains the
unix and gdb specific dependencies of both functions.
removed g_attach_process().
g_on_error_stack_trace() should probably be handled with caution,
i've seem several different linux versions (2.0.x) become unstable
after invokation of this function.
Tue Aug 18 04:40:17 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gmessages.c: new function g_log_set_always_fatal() to set an
additional fatal_mask for log levels that are considered to be fatal
globally (required by gtk). since this mask is not domain-associated,
it is restricted to the log levels, introduced by glib itself.
* gmem.c:
* grel.c:
* gtree.c (g_tree_node_check):
don't use g_print() calls for informational/debugging output,
but log all this stuff through g_log() with G_LOG_LEVEL_INFO.
libraries shouldn't use printf(), g_print() or g_printerr() at all.
Tue Aug 18 02:46:44 1998 Tim Janik <timj@gtk.org>
* glib.h (__STRICT_ANSI__): if __STRICT_ANSI__ is defined, make
`inline' a noop, since strict ANSI rules don't permit `inline'.
Sun Aug 16 23:23:46 CDT 1998 Shawn T. Amundson <amundson@gtk.org>
* Released GLib 1.1.3
* gmodule/Makefile.am: added gmodule-dl.c and gmodule-dld.c to
EXTRA_DIST
* glib.spec: version = 1.1.3
Mon Aug 17 01:46:14 1998 Tim Janik <timj@gtk.org>
* glib.m4: feature an extra MODULES parameter, so glib-config can
be invoked with the "gmodule" argument.
* glib.h: changed the log level to G_LOG_LEVEL_CRITICAL for all
g_return*_if_fail statements, and made them issue a message
like "assertion `%s' failed".
* gmessages.c (g_logv): ugh, don't pass log_domain as NULL to
g_log_find_domain.
Sun Aug 16 20:28:27 1998 Tim Janik <timj@gtk.org>
* version bump to 1.1.3, binary age 0, interface age 0.
* glib.h: be nice to platforms that don't have gint64 and don't
issue #warning on every compilation. since glib doesn't require
gint64 itself, packages that need gint64 should test for this
themselves.
* glib.h:
* gutils.c: added a new function g_vsnprintf().
Fri Aug 14 16:41:53 1998 Tim Janik <timj@gtk.org>
* glib.h: added static inline functions for bit mask tests:
g_bit_nth_lsf, g_bit_nth_msf and g_bit_storage.
Fri Aug 13 14:23:37 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gmessages.c:
revised the message handling system, which is now based on a new
mechanism g_log*. most of the assertment macros got adapted to
feature the new g_log() call with an additional specification of
the log level in a preprocessor macro G_LOG_DOMAIN. if G_LOG_DOMAIN
is undefined upon the includion of glib.h, it'll be defined with a
value of (NULL) and thus preserves the original bahaviour for
warning and error messages. the message handler setting functions
for g_warning, g_error and g_message are only provided for backwards
compatibility and might get removed somewhen.
* Makefile.am: feature the G_LOG_DOMAIN macro to set the log domain
to "GLib" upon compilation. we currently have to add this definition
to the DEFS variable.
* testglib.c: we need an ugly #undef G_LOG_DOMAIN at the start
of this file currently, since automake doesn't support per target
_CFLAGS yet.
* glib.h: changed some gints to gbooleans, made a few const corrections,
removed some superfluous G_STMT_START{}G_STMT_END wrappers, added some
in other required places.
* gnode.c:
(g_node_prepend):
(g_node_insert_before):
(g_node_insert):
(g_node_append_data):
(g_node_prepend_data):
(g_node_insert_data_before):
(g_node_insert_data):
(g_node_append):
return (node), so these macros/functions can be usefully chained with
g_node_new().
[GModule]
Fri Aug 14 02:24:39 1998 Tim Janik <timj@gtk.org>
* Makefile.am: feature the G_LOG_DOMAIN macro to set the log domain
to "GModule" upon compilation. we currently have to add this definition
to the DEFS variable.
* testgmodule.c: we need an ugly #undef G_LOG_DOMAIN at the start
of this file currently, since automake doesn't support per target
_CFLAGS yet.
Mon Aug 10 02:17:19 1998 Tim Janik <timj@gtk.org>
* Makefile.am: minor hack to cause SUBDIRS (gmodule) to be build
last. we do this by making all-recursive-am depend on all-am.
Mon Aug 10 02:18:31 1998 Tim Janik <timj@gtk.org>
* Makefile.am (lib_LTLIBRARIES): for now, skip the dependency on
-lglib for libgmodule-1.1.la, libgplugin_a.la and libgplugin_b.la
since this clashes with inter-library-dependencies for not installed
libraries. glib-config takes care of this for the usuall case, but
there needs to be a better way...
Wed Aug 05 01:15:36 1998 George Lebl <jirka@5z.com>
* testglib.c: fix 64-bitness in g_prints, sizeof doesn't
seem to return int so I cast it for printing, probably
just cosmetic
Tue Aug 4 15:17:54 1998 Tim Janik <timj@gtk.org>
* configure.in: version bump to 1.1.1, binary age 1, interface age 0.
* NEWS: updates.
* README: updates.
* INSTALL: updates and fixes.
* COPYING: include the GNU LGPL, rather than shipping an empty file.
* AUTHORS: listed original authors here, and added people who made
significant improvements to glib.
* glib.h:
* gutils.c: implement g_get_current_dir() which returns a newly
allocated string, instead of a g_getcwd() variant that operates
on a static buffer.
export glib_interface_age and glib_binary_age.
as a convenience, macro definitions have been added for
g_node_insert_data, g_node_insert_data_before, g_node_append_data and
g_node_prepend_data.
* testglib.c: minor cleanups, print current dir.
Mon Aug 3 16:02:26 1998 Tim Janik <timj@gtk.org>
* glib.h:
* gnode.c: change order of gpointer data; field in struct _GNode to
be partly binary compatible with GList and GSList.
Fri Jul 31 22:17:05 1998 Tim Janik <timj@gtk.org>
* testglib.c (g_node_test): added a GNode test.
Fri Jul 31 09:08:16 1998 Tim Janik <timj@gtk.org>
* Makefile.am: compile gnode.c.
* glib.h:
* gnode.c: added implementation of n-way trees.
* gtree.c (g_tree_traverse): added a warning to the switch() statement
which says that G_LEVEL_ORDER is not implemented.
Mon Jul 27 01:02:27 1998 Tim Janik <timj@gtk.org>
* glib.h: #if 0'ed out the GTime definition, until it is definitively
needed. #if 0'ed out the g_getcwd() version, because it is the wrong
implementation.
