Commit Graph

72 Commits

Author SHA1 Message Date
Ryan Lortie
6d08d1191b Revert "gcancellable: allow g_cancellable_disconnect from "cancelled" handler on same thread"
This reverts commits 83605e2d0a and
140fa7ee46.
2013-09-23 16:15:52 -04:00
Alexander Larsson
140fa7ee46 cancellable: Minor fix to docs
The code uses "my_data", not "data" everywhere else.
2013-09-23 09:11:04 +02:00
Ray Strode
83605e2d0a gcancellable: allow g_cancellable_disconnect from "cancelled" handler on same thread
g_cancellable_disconnect will wait until any pending "cancelled"
handlers finish.  This is useful because disconnecting a handler can have the
side-effect of freeing data that the cancelled handler may rely on.
Unfortunately, the code used to enforce this synchronization between
"cancelled" handlers and g_cancellable_disconnect will also cause
deadlock if the cancelled handler itself calls g_cancellable_disconect.

Obviously, if g_cancellable_disconnect is explicitly called by a "cancelled"
handler, then the "cancelled" handler is shouldering the responsibility
of not using any data that may be freed by disconnection.

Also, g_cancellable_disconnect can be called in unexpected places by
lower layers in the code (for instance as a result of g_source_destroy).
In practice, this means it's easy for deadlocks to inadvertently crop
up when using "cancelled" handlers.

For these reasons, it would be good to fix the deadlock.

This commit prevents the deadlock by allowing foregoing synchronization,
if a pending "cancelled" handler is in the same thread as the
g_cancellabale_disconnnect call.

https://bugzilla.gnome.org/show_bug.cgi?id=705395
2013-09-23 09:09:48 +02:00
Dan Winship
8d0e0c6fcc gcancellable: update GCancellableSource, fix a race condition
Update GCancellableSource to call g_source_set_ready_time() when its
cancellable is cancelled, rather than manually checking the state of
the cancellable from prepare() and check().

This means that we now need to use g_cancellable_connect() rather than
g_signal_connect() at construction time, to avoid the connect/cancel
race condition. Likewise, use g_cancellable_disconnect() to avoid the
disconnect/cancel race condition when freeing the source. (In fact,
that was necessary in the earlier code as well, and might have
occasionally caused spurious criticals or worse.)

https://bugzilla.gnome.org/show_bug.cgi?id=701511
2013-07-13 16:38:55 -04:00
Dan Winship
1da47d5ede gsourceclosure: use g_cclosure_marshal_generic
For the glib-defined source types, and any source type that defines a
closure callback but not a closure marshal, use
g_cclosure_marshal_generic. And then remove all the other remaining
source closure marshals.

https://bugzilla.gnome.org/show_bug.cgi?id=701511
2013-07-13 16:38:55 -04:00
Emmanuele Bassi
54cc43630d Rename the generated private data getter function
As it turns out, we have examples of internal functions called
type_name_get_private() in the wild (especially among older libraries),
so we need to use a name for the per-instance private data getter
function that hopefully won't conflict with anything.
2013-06-24 15:43:04 +01:00
Emmanuele Bassi
32747def4b gio: Use the new private instance data declaration
Use the newly added macros, and remove the explicit calls to
g_type_class_add_private().

https://bugzilla.gnome.org/show_bug.cgi?id=700035
2013-06-24 14:18:01 +01:00
Dan Winship
09c18537f4 g_cancellable_source_new: don't use a file descriptor
Rather than implementing GCancellableSource by polling on its fd,
implement it by just waking its GMainContext up from the "cancelled"
signal handler, thereby helping to reduce file descriptor usage.
Suggested by Ryan Lortie.

https://bugzilla.gnome.org/show_bug.cgi?id=680121
2012-07-17 15:32:48 -04:00
Robert Ancell
4143842eb4 Add missing allow-none annotations for function parameters.
Found using:
find . -name '*.c' | xargs grep 'or %NULL' | grep ' \* @' | grep -v '@error' | grep -v allow-none
2012-03-31 20:34:28 +11:00
Javier Jardón
8d3250016d gio: Use G_VALUE_INIT 2011-10-18 17:12:33 +01:00
Ryan Lortie
19cd57d4f3 GCancellable: use GCond and GMutex directly
Use a statically-allocated GCond and directly use GMutex instead of
making use of the undocumented G_LOCK_NAME() macro.

https://bugzilla.gnome.org/show_bug.cgi?id=660739
2011-10-04 11:13:46 -04:00
Matthias Clasen
34ce4dd032 Replace static privates by privates
GStaticPrivate is heading for deprecation soon, and GPrivate
can replace these uses now.
2011-10-02 22:11:33 -04:00
Ryan Lortie
cf26a6fc32 G_LOCK: port from GStaticMutex to GMutex
GCancellable made use of the undocumented G_LOCK_NAME macro in an
invalid way.  Fix that up while we're at it.
2011-09-21 15:55:36 -04:00
Colin Walters
9bf59d4a14 Add glib__private__() API to share between glib,gio; port GWakeup to it
Historically we've added random symbols to the public API with warnings
that they're private; examples are:

glib_gettext(), glib_pgettext()
g_thread_functions_for_glib_use, g_thread_use_default_impl, etc.

And we almost added "GWakeup" to public API just to share between glib and
gio.

This new glib__private__() API exports a hidden vtable, and adds a macro
GLIB_PRIVATE_CALL() that makes it generally convenient to use.

This adds an extremely tiny cost for the double indirection; but it has
the benefit that we don't need to either:

1) compile the code into both glib and gio (like GWakeup), with the
   inefficiency that implies.
2) Export a "do not use this" symbol; the serious problem with this is
   that someone CAN use it pretty easily.  Particularly if we document
   it.  It's far, far harder to peek into a structure without a public
   header file.

https://bugzilla.gnome.org/show_bug.cgi?id=657992
2011-09-09 14:17:08 -04:00
Dan Winship
5a30712dc7 Remove !g_thread_supported() codepaths in gio
In particular, remove the libasyncns import, which was only used by
GUnixResolver, which is only used when threads are not available.
Likewise remove GWin32Resolver, and the hacky broken non-threaded
parts of GIOScheduler.

https://bugzilla.gnome.org/show_bug.cgi?id=616754
2011-09-09 12:47:39 -04:00
Matthias Clasen
1b28408b8b Spelling fixes
Spelling fixes in comments and docs, provided by
Kjartan Maraas in bug 657336.
2011-08-29 14:49:32 -04:00
Matthias Clasen
471593ebf0 GCancellable: Small annotation additions
https://bugzilla.gnome.org/show_bug.cgi?id=657243
2011-08-24 21:25:31 -04:00
Stef Walter
54579bf88f gio: GCancellable can be used concurrently
* Update documentation to note that GCancellable can be used
   concurrently by multiple operations.
 * Add documentation to g_cancellable_reset that behavior is
   undefined if called from within cancelled handler.
 * Add test for multiple concurrent operations using the same
   cancellable.

https://bugzilla.gnome.org/show_bug.cgi?id=656387
2011-08-19 11:13:37 +02:00
Owen W. Taylor
ee63179b71 g_cancellable_get_fd: silently return -1 for NULL cancellable
This keeps compatibility with previous behavior.

https://bugzilla.gnome.org/show_bug.cgi?id=655598

Signed-off-by: David Zeuthen <davidz@redhat.com>
2011-08-01 16:24:34 -04:00
Ryan Lortie
c81eb121a1 GWakeup: make it private API
Colin requests that we keep this one private for now.

Include it at each point of use (libglib, libgio, tests).
2011-07-25 18:51:03 +02:00
Ryan Lortie
0a971e46bf GCancellable: port to GWakeup 2011-07-25 15:30:35 +02:00
Colin Walters
182ed95861 GCancellable: Make eventfd() fall back to pipes on EINVAL too
https://bugzilla.gnome.org/show_bug.cgi?id=654232
2011-07-10 12:19:15 -04:00
Dieter Verfaillie
2456db2c00 GCancellable: Fix build on Win32
https://bugzilla.gnome.org/show_bug.cgi?id=653522
2011-06-30 09:32:32 -04:00
Colin Walters
315210ecdb GCancellable: Fix build on Win32
https://bugzilla.gnome.org/show_bug.cgi?id=653522
2011-06-28 12:52:58 -04:00
Colin Walters
fa87399280 GCancellable: Use Linux eventfd() instead of pipe
See commit f626dd2b4311bd82137c5b208ab2de288c3e6fae for rationale;
basically it's cheaper than a pipe.

https://bugzilla.gnome.org/show_bug.cgi?id=653140
2011-06-21 23:28:52 -04:00
Colin Walters
b74e2a720a Stop using glib-genmarshal at build time
To help cross compilation, don't use glib-genmarshal in our
build.  This is easy now that we have g_cclosure_marshal_generic().

In gobject/, add gmarshal.[ch] to git (making the existing entry
points stubs).

In gio/, simply switch to using g_cclosure_marshal_generic().

https://bugzilla.gnome.org/show_bug.cgi?id=652168
2011-06-20 17:24:07 -04:00
Chun-wei Fan
9f90408e97 Update gcancellable.c for Win32
errno.h is still required for Windows in this file...
2011-05-05 13:40:38 +08:00
Colin Walters
542215b78a Rename g_unix_pipe_flags to g_unix_open_pipe
From IRC discussion, people liked this name more.

https://bugzilla.gnome.org/show_bug.cgi?id=649322
2011-05-03 23:34:17 -04:00
Colin Walters
c078223b38 GCancellable: Use g_unix_pipe_flags with FD_CLOEXEC
The old code was creating a pipe and setting FD_CLOEXEC
non-atomically.

https://bugzilla.gnome.org/show_bug.cgi?id=649225
2011-05-03 10:14:48 -04:00
Colin Walters
ed37970a04 g_unix_set_fd_nonblocking: New API to control file descriptor blocking state
And use it in relevant places in GLib.

https://bugzilla.gnome.org/show_bug.cgi?id=649225
2011-05-03 10:14:48 -04:00
Pavel Holejsovsky
929e8db9f4 Add GI annotation: skip g_cancellable_source_new().
It is not bindable, because GSource is not boxed and thus cannot be
returned as caller-owned.
2010-12-29 16:21:22 +01:00
Dan Winship
6181c7de36 GCancellable: add g_cancellable_create_source()
g_cancellable_create_source() returns a GSource that triggers when its
corresponding GCancellable is cancelled. This can be used with
g_source_add_child_source() to add cancellability to a source.

Port gasynchelper's FDSource to use this rather than doing its own
cancellable handling, and also fix up its callback argument order to
be more normal.

https://bugzilla.gnome.org/show_bug.cgi?id=634239
2010-11-26 15:07:28 -05:00
Johan Dahlin
30132c44c1 Add a lot of missing annotations 2010-09-24 18:24:41 -03:00
Ryan Lortie
5b946e0504 gio/: fully remove gioalias hacks 2010-07-07 19:53:22 -04:00
Dan Winship
622916b731 g_cancellable_release_fd: allow NULL cancellable
Almost all GCancellable methods silently do nothing if passed NULL for
the cancellable. Make g_cancellable_release_fd() do that as well.
2010-05-03 12:08:14 -04:00
Benjamin Otte
e7763678b5 Fix race in g_cancellable_cancel()
We need to check priv->cancelled after taking the lock. Previously we
only checked it just before taking the lock, which left a small chance
for a race.
2010-03-29 12:57:35 -05:00
Benjamin Otte
5527a2ac2c Remove unneccessary variable from g_cancellable_cancel()
The variable makes a complicated function even more complicated.
2010-03-29 12:57:35 -05:00
Ryan Lortie
85501f5ffa Bug 591214 - Warnings building gcancellable.o
- check for EINTR on read() and write() calls
- remove unused 'priv' variable
2009-11-23 13:53:39 -05:00
Juan A. Suarez Romero
ba2b2bbca2 priv variable should only be used in win32 code 2009-11-20 16:49:47 +01:00
Ryan Lortie
6b7b7a7602 Bug 587300 - g_cancellable_disconnect deadlock
add documentation to clarify that a deadlock is the expected case for
calling this function from a signal handler
2009-11-11 23:54:18 -05:00
Matthias Clasen
1ec32c403b Move a assignment to the relevant #ifdef branch
Dead code spotted by clang.
2009-09-07 03:02:58 -04:00
Benjamin Otte
fc44bf40a4 Fix gtk-doc syntax 2009-09-01 12:48:55 +02:00
Benjamin Otte
6db03d73a4 When creating a pipe for a cancelled cancellable, write to it
Includes (untested) fix for win32 that calls SetEvent() in that case.
2009-08-19 11:02:06 +02:00
Benjamin Otte
e2c97292c2 Implement g_cancellable_release_fd()
Part of: Bug 591388 - number of GCancellables available is too limited
2009-08-19 11:02:06 +02:00
Benjamin Otte
63426886ff Add g_cancellable_release_fd()
This patch only adds the function. The function is a NOP.
See the API documentation for a rationale.

Part of: Bug 591388 - number of GCancellables available is too limited
2009-08-19 11:02:05 +02:00
Benjamin Otte
bb8e4f06ab Bug 591714 – Figure out failure handling for g_cancellable_make_pollfd()
Make g_cancellable_make_pollfd() return a gboolean that indicates its error
status. Update the code that calls this function accordingly.
2009-08-19 11:02:05 +02:00
Matthias Clasen
563c55bb71 Fix a segfault in g_cancellable_cancel 2009-07-05 23:38:09 -04:00
Benjamin Otte
c85ff0c750 [gio] minor improvements to g_cancellable_cancel()
- make this function not crash when cancellable is NULL
- avoid locking when the cancellable has already been cancelled
2009-07-05 21:36:03 +02:00
Richard Hughes
b0dc7afd2a Allow GCancellable to be subclassed by adding a private structure 2009-06-24 10:33:24 +02:00
Benjamin Otte
ced88fd0de Bug 585189 – g_cancellable_reset() must be called in same thread ...
... as g_cancellable_cancel()
Rework a g_critical() that would (rarely) trigger when _reset() was
called in a thread different from _cancel() by making _reset() wait for
the cancel function to be finished the same way
g_cancellable_disconnect() uses.
2009-06-09 12:19:24 +02:00