For performance reasons we should always try to send or
receive our messages first and only wait for more space
or data to become available if we get an EAGAIN (and
are in blocking mode).
https://bugzilla.gnome.org/show_bug.cgi?id=751122
This can be handy when you want to change the sense of a toggle
in the UI without rewriting the underlying logic. Currently, this
is just exposed as a construct-only property. We may add a
convenience wrapper or a special !property syntax for this later.
https://bugzilla.gnome.org/show_bug.cgi?id=728489
This is the right thing to do for the "a session is a user-session"
model implemented in dbus 1.9.14, which is described in
<http://lists.freedesktop.org/archives/dbus/2015-January/016522.html>.
It also resembles sd-bus' behaviour, although sd-bus will only try
kdbus and XDG_RUNTIME_DIR/bus, and never runs dbus-launch.
On systems following the more traditional "a session is a login-session"
model, X_R_D/bus won't exist, so it is harmless to check for it before
falling back to X11 autolaunching. Again, this matches the behaviour
of current libdbus and sd-bus versions.
Now that we do this, g_test_dbus_unset() needs to clear XDG_RUNTIME_DIR
as well as everything else.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=747941
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
This only alters what happens if we specifically connect to
"autolaunch:", for instance via "DBUS_SESSION_BUS_ADDRESS=autolaunch:".
We will still potentially try other platform-specific things if
DBUS_SESSION_BUS_ADDRESS is unset. There are currently no other
platform-specific things, so there is no practical difference yet,
but I'm about to add a more-preferred fallback path before autolaunch.
This matches libdbus' behaviour and the D-Bus Specification, in which
the autolaunch: transport specifically means X11 autolaunch
(as implemented by "dbus-launch --autolaunch") on Unix, or a
shared-memory-based protocol on Windows. Other platform-specific
transports or default/fallback modes, including launchd on Mac OS X
and XDG_RUNTIME_DIR/bus on Unix, are not part of "autolaunch:".
It's rather unfortunate that the same name means two different
platform-specific mechanisms, specific to different platforms -
if they were added today I'd call them x11: and windows-shm: or
something - but it's been like this since 2007 so it's too late now.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=747941
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Currently, applications using g_application_add_main_option_entries()
won't get translated entries in --help output. We need to call
g_option_group_set_translation_domain() with a NULL domain to ensure that the
default application gettext domain (ie the one passed to the
textdomain() call) will be used for the main entries passed by the
application.
If we want to allow more flexibility on which gettext domain should be
used for these entries, new API will be needed.
https://bugzilla.gnome.org/show_bug.cgi?id=750322
Add a new section to the main GSettings documentation which documents
the best practices for integrating GSettings into an autoconf/automake
build system using the GLIB_GSETTINGS macro.
Some of this material was adapted from the migrating-gconf.xml guide.
https://bugzilla.gnome.org/show_bug.cgi?id=741788
* Only check __OBJECT_ATTRIBUTES_DEFINED and __UNICODE_STRING_DEFINED
on MinGW (MSVC doesn't have these)
* MSVC: disable:4005 when including windows.h and ntstatus.h
* Move NTAPI cconv into the parens with the NtQueryKeyFunc
* Fix return values in some functions
https://bugzilla.gnome.org/show_bug.cgi?id=734888
- On first call scan the registry, collect information about URI protocols,
file extensions, applications and handlers, store that as a set of
interconnected structures in several hash tables
- Watch the registry keys, re-scan the registry when any one of them changes.
https://bugzilla.gnome.org/show_bug.cgi?id=666831
Use the newly added g_settings_schema_list_keys() API instead of
g_settings_list_keys() in order to list keys.
Doing this allows the 'list-keys' command to work without creating a
GSettings object, which is more efficient. It also means that we don't
have to provide a (meaningless and ignored) path when listing keys on
relocatable schemas.
While we're at it, update the 'range' command not to require creation of
a GSettings object, in a similar way.
https://bugzilla.gnome.org/show_bug.cgi?id=740308
The list of keys in a GSettings object depends entirely on the schema,
so it makes sense to expose this API there.
Move the implementation out of gsettings.c and into gsettingsschema.c,
replacing the earlier with a simple call to the new location.
We don't do the same for children because the children can change.
https://bugzilla.gnome.org/show_bug.cgi?id=740308
Cancellation of GPollFileMonitor is now handled correctly (in the sense
that no further signals will follow) but let's be extra paranoid and
disconnect our handler anyway, for good measure.
https://bugzilla.gnome.org/show_bug.cgi?id=739424
GPollFileMonitor emits CHANGES_DONE_HINT after CHANGED signals, but it
doesn't check to ensure that the file monitor wasn't cancelled before it
does that.
If the original signal caused the monitor to be unreffed, cancelled and
destroyed, we would still end up emitting an extra signal on it.
Avoid that by checking first for cancellation.
https://bugzilla.gnome.org/show_bug.cgi?id=739424
Removed all mentions of GLib file name encoding referring to
the environment strings. The env var content has no defined relation
to GLib's notion of filename encoding, or any encoding whatsoever.
It would be wrong to pass all UTF-8 strings through
g_filename_from_utf8() in order to put them into the environment,
for one thing.
https://bugzilla.gnome.org/show_bug.cgi?id=738185
DBus has recently introduced new message flag
DBUS_HEADER_FLAG_ALLOW_INTERACTIVE_AUTHORIZATION, which tells that
caller is willing to wait for unspecified amount of time for the call
to return, as the service may perform interactive authorization (e.g.
using polkit).
https://bugzilla.gnome.org/show_bug.cgi?id=739616
In order to maintain a logical stream of events, we need to make sure we
flush and queued change notifications before responding to any requests
for information from clients.
If we don't do this, it's possible that we emit an 'add' event that was
queued at the time of a 'DescribeAll' call _after_ the reply to that
call (which already contained the description of the new action).
In practice, this is not only logically incorrect, but it can also cause
problems. If a change to action 'state' or 'enabled' occurs after the
DescribeAll but before the signal has been dispatched, it will be
ignored because an 'add' signal is already pending. When that add
signal is sent, it will contain the correct data, but the receiver will
ignore it because it already saw the action in the DescribeAll reply.
https://bugzilla.gnome.org/show_bug.cgi?id=749693
This is a hack for GLocalFileInfo to correctly get icons for directories.
Without this change content type for any W32 directory is NULL
(because there's no registry entry for "inode/directory" by default,
and in any way there's no file extension that means "directory" to put there),
and GLocalFileInfo uses content type to grab icons.
https://bugzilla.gnome.org/show_bug.cgi?id=748727
The code here was returning gtk-directory and similar names as
fallback, with a comment claiming that these are 'builtin gtk'.
But they aren't, anymore, so just return the standard names.
This code used to look at the SCM_CREDENTIALS and ignore every message
not from uid 0. However, when user namespaces are in use this does not
work, as if uid 0 is not mapped you get overflowuid instead. Right now
this means we ignore all messages in such user namespaces and glib
apps hang on startup.
We can't look at pids either, as pid 0 is returned for processes
outside your pid namespace.
Instead the correct approach is to look at the sending sockaddr and
if the port id (nl_pid) is zero, then its from the kernel.
Source:
http://lists.linuxfoundation.org/pipermail/containers/2015-May/036032.htmlhttps://bugzilla.gnome.org/show_bug.cgi?id=750203
Instead of just dropping address types that we're not specifically
handling we return a GNativeSocketAddress which is just a dummy
container for the stuct sockaddr.
https://bugzilla.gnome.org/show_bug.cgi?id=750203
GListStore requires that item-type be derived from GObject, so specify
that the type of the item parameters is GObject so the functions can be
used via gobject-introspection.
Add a scope parameter for the callback used during insert_sorted.
Previously, we waited up to 0.5s, but that can fail on slow
architectures like ARM; now we wait up to 60s in 0.1s increments.
Patch originally by Simon McVittie <simon.mcvittie@collabora.co.uk>,
modified by Iain Lane to be called earlier, to catch all testcases in a
particular test.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=724113
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Acked-by: Matthias Clasen <mclasen@redhat.com>
We previously waited 0.25s, which should be enough even on slow machines,
but you never know; but we also now wait in 0.1s increments, so this test
should actually be faster now.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=724113
Acked-by: Matthias Clasen <mclasen@redhat.com>
I searched all files that mention g_test_run, and replaced most
g_print() calls. This avoids interfering with TAP. Exceptions:
* gio/tests/network-monitor: a manual mode that is run by
"./network-monitor --watch" is unaffected
* glib/gtester.c: not a test
* glib/gtestutils.c: not a test
* glib/tests/logging.c: specifically exercising g_print()
* glib/tests/markup-parse.c: a manual mode that is run by
"./markup-parse --cdata-as-text" is unaffected
* glib/tests/testing.c: specifically exercising capture of stdout
in subprocesses
* glib/tests/utils.c: captures a subprocess's stdout
* glib/tests/testglib.c: exercises an assertion failure in g_print()
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
This stops it from interfering with structured stdout such as TAP.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
This avoids any possibility of interfering with test syntax (such as
TAP) on stdout. TAP specifically does not parse stderr.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=725981
Reviewed-by: Colin Walters <walters@verbum.org>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
