We're now caching arg0 but such value is not cleared when a new body is
set as it's in the connection filter test cases where we've a leak as
highlighted by both valgrind and leak sanitizer
In a D-Bus-Specification-compliant message bus, the owner of a well-known
name is a unique name. However, ibus has its own small implementation
of a message bus (src/ibusbus.c) in which org.freedesktop.IBus is
special-cased to also have itself as its owner (like org.freedesktop.DBus
on a standard message bus), and connects to that bus with the
G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION flag. The ability to do
this regressed when CVE-2024-34397 was fixed.
Relax the checks to allow the owner of a well-known name to be any valid
D-Bus name, even if it is not syntactically a unique name.
Fixes: 683b14b9 "gdbus: Track name owners for signal subscriptions"
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/3353
Bug-Debian: https://bugs.debian.org/1070730
Bug-Debian: https://bugs.debian.org/1070736
Bug-Debian: https://bugs.debian.org/1070743
Bug-Debian: https://bugs.debian.org/1070745
Signed-off-by: Simon McVittie <smcv@debian.org>
The test case assumes signals will dispatched in a different order than
they're subscribed. In fact, signals can be dispatched in any order,
and are often dispatched in order.
This commit reorders the subscriptions so they're in order, which is
more logical, and also changes the code to only exit the event loops
when there are no pending handlers ready to dispatch.
(cherry picked from commit 47866d252f)
GDBusConnection sends each signal to recipients in a separate idle
callback, and there's no particular guarantee about the order in which
they're scheduled or dispatched. For the NameOwnerChanged signal that
reports the name becoming unowned, it's possible that g_bus_watch_name()
gets its idle callback called before the GDBusProxy:g-name-owner
machinery has updated the name owner, in which case the assertion
will fail.
Fixing GNOME/glib#3268 introduced a new subscription to NameOwnerChanged
which can alter the order of delivery, particularly in the case where
G_DBUS_PROXY_FLAGS_NO_MATCH_RULE was used (as tested in
/gdbus/proxy/no-match-rule). The resulting test failure is intermittent,
but reliably appears within 100 repetitions of that test.
Fixes: 511c5f5b "tests: Wait for gdbus-testserver to die when killing it"
Signed-off-by: Simon McVittie <smcv@debian.org>
If the file to be added is on a read-only filesystem, opening read/write
will fail with EROFS. In this case we should fall back to opening it
read-only, the same way we already do if write access is forbidden by
DAC or MAC.
An easy way to reproduce this test failure is to build and test GLib
in a podman container, with its source code read-only and its build
directory read/write:
podman run --rm -it \
-v $(pwd):$(pwd):ro \
-v $(pwd)/_build:$(pwd)/_build:rw \
-w $(pwd) ...
Before this commit, the dbus-appinfo test would fail, because opening
${srcdir}/gio/tests/org.gtk.test.dbusappinfo.flatpak.desktop read/write
would fail with EROFS.
For completeness, give similar handling to the other error codes
documented in Linux open(2) that might succeed if re-attempted using
read-only access: according to that documentation, we could get EPERM
if opening read/write is prevented by fcntl F_ADD_SEALS, or ETXTBSY
if the file is an executable that is currently being run.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This was a bug that existed during development of this branch; make sure
it doesn't come back.
This test fails with a use-after-free and crash if we comment out the
part of name_watcher_unref_watched_name() that removes the name watcher
from `map_method_serial_to_name_watcher`.
It would also fail with an assertion failure if we asserted in
name_watcher_unref_watched_name() that get_name_owner_serial == 0
(i.e. that GetNameOwner is not in-flight at destruction).
Signed-off-by: Simon McVittie <smcv@collabora.com>
The vulnerability reported as GNOME/glib#3268 can be characterized
as: these signals from an attacker should not be delivered to either
the GDBusConnection or the GDBusProxy, but in fact they are (in at
least some scenarios).
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268
Signed-off-by: Simon McVittie <smcv@collabora.com>
The expected result is that because TEST_CONN_SERVICE owns
ALREADY_OWNED_NAME but not (yet) OWNED_LATER_NAME, the signal will be
delivered to the subscriber for the former but not the latter.
Before #3268 was fixed, it was incorrectly delivered to both.
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268 (partially)
Signed-off-by: Simon McVittie <smcv@collabora.com>
Otherwise a malicious connection on a shared bus, especially the system
bus, could trick GDBus clients into processing signals sent by the
malicious connection as though they had come from the real owner of a
well-known service name.
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/3268
Signed-off-by: Simon McVittie <smcv@collabora.com>
We will use this in a subsequent commit to prevent signals from an
impostor from being delivered to a subscriber.
To avoid message reordering leading to misleading situations, this does
not use the existing mechanism for watching bus name ownership, which
delivers the ownership changes to other main-contexts. Instead, it all
happens on the single thread used by the GDBusWorker, so the order in
which messages are received is the order in which they are processed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This will become confusing when we start tracking the owner of a
well-known-name sender, and it's redundant anyway. Instead, track the
1 bit of data that we actually need: whether it's a well-known name.
Strictly speaking this too is redundant, because it's syntactically
derivable from the sender, but only via extra string operations.
A subsequent commit will add a data structure to keep track of the
owner of a well-known-name sender, at which point this boolean will
be replaced by the presence or absence of that data structure.
Signed-off-by: Simon McVittie <smcv@collabora.com>
No functional change, just removing some nesting. The check for whether
signal_data->subscribers is empty changes from a conditional that tests
whether it is into an early-return if it isn't.
A subsequent commit will add additional conditions that make us consider
a SignalData to be still in use and therefore not eligible to be removed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
No functional changes, except that the implicit ownership-transfer
for the rule field becomes explicit (the local variable is set to NULL
afterwards).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Subsequent changes will need to access these data structures from
on_worker_message_received(). No functional change here, only moving
code around.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Using these is a bit more clearly correct than repeating them everywhere.
To avoid excessive diffstat in a branch for a bug fix, I'm not
immediately replacing all existing occurrences of the same literals with
these names.
The names of these constants are chosen to be consistent with libdbus,
despite using somewhat outdated terminology (D-Bus now uses the term
"well-known bus name" for what used to be called a service name,
reserving the word "service" to mean specifically the programs that
have .service files and participate in service activation).
Signed-off-by: Simon McVittie <smcv@collabora.com>
On GNOME/glib#3268 there was some concern about whether this would
allow an attacker to send signals and have them be matched to a
GDBusProxy in this situation, but it seems that was a false alarm.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This somewhat duplicates test_connection_signals(), but is easier to
extend to cover different scenarios.
Each scenario is tested three times: once with lower-level
GDBusConnection APIs, once with the higher-level GDBusProxy (which
cannot implement all of the subscription scenarios, so some message
counts are lower), and once with both (to check that delivery of the
same message to multiple destinations is handled appropriately).
Signed-off-by: Simon McVittie <smcv@collabora.com>
If a connection has two signal subscriptions active for the same signal,
one with arg0 matching and one without, a signal which doesn’t contain
an arg0 value (i.e. `g_dbus_message_get_arg0()` returns `NULL`) will
cause `NULL` to be passed to `strcmp()` when checking for a match
against the signal subscription which *has* arg0 matching, causing a
crash.
Fix that by adding the obvious `NULL` check, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3342
Rather than `strdup()`ing strings when passing them into
`_xdg_glob_list_append()`, `strdup()` them *inside* the function
instead.
This avoids a leak in the case that the list entry (tuple of `data` and
`mime_type`) already exists in the list.
This has been upstreamed as
https://gitlab.freedesktop.org/xdg/xdgmime/-/merge_requests/36.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
There were a couple of functions in `GDBusConnection` which take a
`user_data` argument, but which then leak it if they error out early.
A true positive spotted by scan-build!
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
There were some error paths where it wasn’t set, returning an
uninitialised value to the caller.
Spotted by scan-build.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
The recently added libmount-based unix mount monitoring may fail when the
device exceeds inotify limits. Let's fallback to the older implementation
in case of the `mnt_monitor_get_fd` function failure. This among others
fixes tracker-miners failures caused by seccomp rules.
Fixes: https://gitlab.gnome.org/GNOME/tracker-miners/-/issues/315
With the shell in nounset mode, an error is emitted on referencing
`schemadir` as it is not initialized in all code paths.
Initialize to an empty string to fix.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
These consistently fail on scheduled CI runs, which is not helping our
ability to catch Hurd regressions.
For example, https://gitlab.gnome.org/GNOME/glib/-/jobs/3709402
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
See: #3148
The gdbus-example-objectmanager visibility header was being re-created
on reconfigure, causing a needless rebuild of gdbus tests that were
using the visibility header.
All other invocations of gen_visibility_macros are via custom_target.
If we don't do this, the --help text is formatted as though the option
did not expect an argument.
IDENTIFIER is a new translated string, but it is developer-oriented,
so a missing translation is not particularly bad. COMMAND is already
present in translations.
Signed-off-by: Simon McVittie <smcv@collabora.com>
If we don't do this, the --help text is formatted as though the option
did not expect an argument.
This introduces a new translated string, but it is developer-oriented,
so a missing translation is not particularly bad.
Signed-off-by: Simon McVittie <smcv@collabora.com>
The ref held by `data->task` may be the last one on the `GTask`. The
`GTask` stores `attempt->data` as its task data, and so when the `GTask`
is finalised, `attempt->data` is too. `connection_attempt_remove()`
needs to access `attempt->data`, so must be called before the
`g_object_unref()` in this situation.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3266
Currently, the `stop_func` is executed on an extra thread, and the
`g_context_specific_group_remove` function returns before the `stop_func`
finishes. It may happen that the `stop_func` is never executed if the
program terminates soon after calling it. Let's wait until the `stop_func`
is done.
Fixes: https://gitlab.gnome.org/GNOME/glib/-/issues/3258
This should clarify things a little for users of language bindings, who
don’t directly use `.pc` files.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
This creates `GioUnix`, `GioWin32`, `GLibUnix` and `GLibWin32`. These
bodies of documentation are in addition to the main, platform agnostic,
documentation for both libraries.
This commit necessarily includes various mechanical changes to update
the repository namespace used in various existing documentation links to
platform specific APIs.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3037
There was no obvious logical need to list the `GAppInfo` subclass
sources separately in the build. It makes more sense to add them to the
platform-specific source lists, since they are platform specific.
This will be used in an upcoming commit which generates
platform-specific GIR files, so needs the full platform-specific lists
of sources.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3037
`GFileDescriptorBased` is in `gio-unix-2.0` rather than `gio-2.0`, so
its types shouldn’t be declared in a header belonging to the latter.
This hasn’t been a problem previously because C is fine with that. But
upcoming commits are going to split the introspection scanning for
`gio-2.0` and `gio-unix-2.0`, and the introspection scanner is a little
more picky about declarations not being spread all over the place.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3037
The symbols still have to be exported from the library (since they’re
called from unit tests), but there was never any reason for them to be
in a public header.
This means they now disappear from `Gio-2.0.gir`.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3231
This property is supposed to be used by authors of applications that use GAppliaction to output the version by --version flag or otherwise if a version is needed.
Closes#3198
Signed-off-by: Maxim Moskalets <Maxim.Moskalets@kaspersky.com>
This is another way to get the file system type from `statvfs()`, newly
added in glibc 2.39
(https://lwn.net/ml/libc-alpha/38790850.J2Yia2DhmK@pinacolada/).
This hasn’t been tested with glibc 2.39 as I don’t have it, but the
change seems fairly straightforward.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
