stages: - style-check - build - coverage - analysis - deploy - report cache: paths: - _ccache/ variables: FEDORA_IMAGE: "registry.gitlab.gnome.org/gnome/glib/fedora:v26" COVERITY_IMAGE: "registry.gitlab.gnome.org/gnome/glib/coverity:v7" DEBIAN_IMAGE: "registry.gitlab.gnome.org/gnome/glib/debian-stable:v19" ALPINE_IMAGE: "registry.gitlab.gnome.org/gnome/glib/alpine:v3" MINGW_IMAGE: "registry.gitlab.gnome.org/gnome/glib/mingw:v15" MESON_TEST_TIMEOUT_MULTIPLIER: 4 G_MESSAGES_DEBUG: all MESON_COMMON_OPTIONS: "--buildtype debug --wrap-mode=nodownload --fatal-meson-warnings" # Default CI job setup; contrast with `.only-origin`. # # Don’t execute the pipeline when a merge request is merged into `origin/main`, # as it will have already been tested .only-default: only: - branches except: refs: - tags variables: - $CI_PIPELINE_SOURCE == "push" && $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH && $CI_PROJECT_NAMESPACE == "GNOME" # As above, but does get executed on merge into `origin/main`. For use with # updating code coverage results and docs builds. .only-default-and-merges: only: - branches except: refs: - tags # Some jobs run on CI runners which don’t have good isolation between CI jobs, # and don’t have much available resource. Limit those jobs to only ones on the # origin repository (GNOME/glib), rather than people’s forks. Code in the origin # repository can be trusted. .only-origin: only: - branches@GNOME/glib except: - tags # Some jobs take a long time and are unlikely to find failures (or will find # failures which are not merge-blockers to fix), so they’re executed on a weekly # schedule in order to save CI resources and speed up branch pipelines. .only-schedules: only: - schedules except: - tags # Some jobs take a long time and are unlikely to find failures (or will find # failures which are not merge-blockers to fix), so they’re executed on a weekly # schedule in order to save CI resources and speed up branch pipelines. # But for specific merge requests, one may still want to run them, so make # possible to run them manually. .only-schedules-or-manual: rules: - if: $CI_PIPELINE_SOURCE == "merge_request_event" when: never # As per rule before, the following rules will only apply to non MR events - if: $CI_PIPELINE_SOURCE == "schedule" when: always - if: $CI_PIPELINE_SOURCE != "schedule" when: manual allow_failure: true # Some jobs should be runnable only on schedules and when triggered by a branch # in the origin repository, but without .only-schedules-or-manual-in-default-branch: rules: - if: $CI_PROJECT_PATH != "GNOME/glib" || $CI_COMMIT_BRANCH != $CI_DEFAULT_BRANCH when: never # As per rule before, the following rules will apply only to GNOME/glib:main - if: $CI_PIPELINE_SOURCE == "schedule" when: always - if: $CI_PIPELINE_SOURCE != "schedule" when: manual allow_failure: true # Some jobs run on CI runners don’t have much available resource. # Limit those jobs to only ones on the origin repository (GNOME/glib), # rather than people’s forks or if ran manually. .only-origin-or-manual: rules: - if: $CI_PIPELINE_SOURCE == "merge_request_event" when: never - if: $CI_PIPELINE_SOURCE == "schedule" when: never - if: $CI_PROJECT_NAMESPACE == "GNOME" when: always - if: $CI_PROJECT_NAMESPACE != "GNOME" when: manual allow_failure: true .build-linux: before_script: - bash .gitlab-ci/show-execution-environment.sh - cp -r $HOME/subprojects/* subprojects/ # FIXME: Work around https://gitlab.com/gitlab-org/gitlab/-/issues/391756 .with-git: before_script: - rm -rf subprojects/gvdb - git config --global --add safe.directory "${PWD}" - git submodule update --init --depth 1 variables: GIT_SUBMODULE_STRATEGY: "none" GIT_SUBMODULE_DEPTH: 1 style-check-advisory: extends: - .only-default - .with-git image: $DEBIAN_IMAGE stage: style-check allow_failure: true script: - failed= - .gitlab-ci/run-style-check-diff.sh || failed=1 - .gitlab-ci/run-check-todos.sh || failed=1 - test -z "$failed" sh-and-py-check: extends: - .only-default - .with-git image: $DEBIAN_IMAGE stage: style-check allow_failure: false script: - failed= - tests/shellcheck.sh || failed=1 - tests/black.sh || failed=1 - tests/flake8.sh || failed=1 - test -z "$failed" variables: LINT_WARNINGS_ARE_ERRORS: '1' only: changes: - "**/*.py" - "**/*.sh" style-check-mandatory: extends: - .only-default - .with-git image: $DEBIAN_IMAGE stage: style-check allow_failure: false script: - tests/reuse.sh variables: LINT_WARNINGS_ARE_ERRORS: '1' fedora-x86_64: extends: - .build-linux - .only-default-and-merges - .with-git image: $FEDORA_IMAGE stage: build needs: [] variables: CFLAGS: "-coverage -ftest-coverage -fprofile-arcs" before_script: - !reference [".build-linux", "before_script"] - !reference [".with-git", "before_script"] script: - meson setup ${MESON_COMMON_OPTIONS} --werror --default-library=both --prefix=$HOME/glib-installed --localstatedir=/var --libdir=lib -Dsystemtap=true -Ddtrace=true -Dinstalled_tests=true -Ddocumentation=true -Dintrospection=enabled -Dman-pages=enabled _build - meson compile -C _build - mkdir -p _coverage - lcov --config-file .lcovrc --directory _build --capture --initial --output-file "_coverage/${CI_JOB_NAME}-baseline.lcov" - .gitlab-ci/run-tests.sh - lcov --config-file .lcovrc --directory _build --capture --output-file "_coverage/${CI_JOB_NAME}.lcov" # Copy the built documentation to an artifact directory. The build for docs.gtk.org # can then pull it from there — see https://gitlab.gnome.org/GNOME/gtk/-/blob/docs-gtk-org/README.md - mkdir -p _reference/ - mv _build/docs/reference/glib/glib-2.0/ _reference/glib/ - mv _build/docs/reference/glib/glib-unix-2.0/ _reference/glib-unix/ - mv _build/docs/reference/gmodule/gmodule-2.0/ _reference/gmodule/ - mv _build/docs/reference/gobject/gobject-2.0/ _reference/gobject/ - mv _build/docs/reference/gio/gio-2.0/ _reference/gio/ - mv _build/docs/reference/gio/gio-unix-2.0/ _reference/gio-unix/ - mv _build/docs/reference/girepository/girepository-2.0/ _reference/girepository/ artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_build/config.h" - "_build/glib/glibconfig.h" - "_build/meson-logs" - "_coverage" - "_reference" debian-stable-x86_64: extends: - .build-linux - .only-default - .with-git image: $DEBIAN_IMAGE stage: build needs: [] before_script: - !reference [".build-linux", "before_script"] - !reference [".with-git", "before_script"] script: - meson setup ${MESON_COMMON_OPTIONS} --werror --default-library=both --prefix=$HOME/glib-installed --localstatedir=/var --libdir=lib -Dsystemtap=true -Ddtrace=true _build - meson compile -C _build - .gitlab-ci/run-tests.sh artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_build/config.h" - "_build/glib/glibconfig.h" - "_build/meson-logs" hurd-i386: extends: - .only-schedules-or-manual - .with-git stage: build tags: - hurd needs: [] script: # FIXME: We can’t use ${MESON_COMMON_OPTIONS} here because the Hurd runner # has Meson 1.3 installed. See the comment below about the same problem on # FreeBSD. - meson setup --buildtype debug --wrap-mode=nodownload --werror --default-library=both --prefix=$HOME/glib-installed --localstatedir=/var --libdir=lib _build - meson compile -C _build - .gitlab-ci/run-tests.sh artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_build/config.h" - "_build/glib/glibconfig.h" - "_build/meson-logs" muslc-alpine-x86_64: extends: - .build-linux - .only-schedules-or-manual - .with-git image: $ALPINE_IMAGE stage: build needs: [] before_script: - !reference [".build-linux", "before_script"] - !reference [".with-git", "before_script"] script: - meson setup ${MESON_COMMON_OPTIONS} --werror --default-library=both --prefix=$HOME/glib-installed --localstatedir=/var --libdir=lib -Dsystemtap=true _build - meson compile -C _build - .gitlab-ci/run-tests.sh artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_build/config.h" - "_build/glib/glibconfig.h" - "_build/meson-logs" installed-tests: extends: - .build-linux - .only-schedules-or-manual image: $FEDORA_IMAGE stage: build needs: [] script: # dtrace is disabled because it breaks the static-link.py test - meson setup ${MESON_COMMON_OPTIONS} --werror --prefix=/usr --libdir=/usr/lib64 -Dinstalled_tests=true -Ddefault_library=both -Ddtrace=false _build - meson compile -C _build - sudo meson install -C _build # Remove old headers, possibly present in current installation - sudo rm -f /usr/include/glib-2.0/glib/gurifuncs.h - sudo chown -R `id -un`:`id -gn` _build/ # Work-around https://gitlab.gnome.org/GNOME/gnome-desktop-testing/merge_requests/2 - mkdir -p _build/installed-tests-report/logs/ - GLIB_TEST_COMPILATION=1 gnome-desktop-testing-runner --report-directory=_build/installed-tests-report/failed/ --log-directory=_build/installed-tests-report/logs/ --parallel=0 glib artifacts: name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_build/config.h" - "_build/glib/glibconfig.h" - "_build/meson-logs" - "_build/installed-tests-report/" G_DISABLE_ASSERT: extends: - .build-linux - .only-schedules-or-manual - .with-git image: $FEDORA_IMAGE stage: build needs: [] variables: MESON_TEST_TIMEOUT_MULTIPLIER: 15 before_script: - !reference [".build-linux", "before_script"] - !reference [".with-git", "before_script"] script: - meson setup ${MESON_COMMON_OPTIONS} --werror -Dsystemtap=true -Ddtrace=true -Dinstalled_tests=true -Dglib_assert=false -Dintrospection=enabled _build - meson compile -C _build # Also take the opportunity to run the thorough tests (which are slow) - bash -x ./.gitlab-ci/run-tests.sh --setup thorough artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_build/config.h" - "_build/glib/glibconfig.h" - "_build/meson-logs" valgrind: extends: - .build-linux - .only-schedules-or-manual - .with-git image: $FEDORA_IMAGE stage: analysis needs: [] variables: MESON_TEST_TIMEOUT_MULTIPLIER: 15 before_script: - !reference [".build-linux", "before_script"] - !reference [".with-git", "before_script"] script: - meson setup ${MESON_COMMON_OPTIONS} --werror -Dsystemtap=true -Ddtrace=true -Dinstalled_tests=true -Dintrospection=enabled _build - meson compile -C _build # Valgrind doesn’t work when the soft FD limit is set too high # See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2710 - ulimit -Sn 1024 - bash -x ./.gitlab-ci/run-tests.sh --setup valgrind --no-suite slow artifacts: reports: junit: "_build/meson-logs/testlog-valgrind.junit.xml" name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_build/config.h" - "_build/glib/glibconfig.h" - "_build/meson-logs" .cross-build-linux: extends: .build-linux stage: build needs: [] artifacts: name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_build/meson-logs" cross-android_arm64: extends: - .cross-build-linux - .only-default image: $FEDORA_IMAGE script: # FIXME: add --werror - meson setup ${MESON_COMMON_OPTIONS} --cross-file=.gitlab-ci/cross_file_android_arm64_31.txt _build - meson compile -C _build cross-mingw64: extends: - .cross-build-linux - .only-default image: $MINGW_IMAGE variables: PYTHONUTF8: "1" script: # FIXME: Add --werror - meson setup ${MESON_COMMON_OPTIONS} --cross-file=/opt/cross_file_mingw64.txt _build - meson compile -C _build artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - _build/meson-logs - _build/glib/libglib-2.0-0.dll - _build/gio/libgio-2.0-0.dll - _build/gmodule/libgmodule-2.0-0.dll - _build/gthread/libgthread-2.0-0.dll - _build/gobject/libgobject-2.0-0.dll # A note about msys2: it’s a rolling release distribution, running Windows under # Docker isn’t really supported, and the win32-ps CI runner is shared. All that # adds up to mean that we have to run CI against the latest msys2 packages, and # that this occasionally causes build failures in GLib due to changes in msys2. # In order to avoid that pre-empting other GLib development, the policy in such # cases is to: # 1. Immediately and without hesitation make the msys2-* CI jobs non-fatal # (add `allow_failure: true` below). # 2. File an issue about fixing the GLib msys2 build and re-enabling failure # on the CI job # 3. Set the milestone for that issue to be the next GLib release, so it’s done # in a timely manner; and tag it as ~win32 so the GLib Windows maintainers # are notified and can work on it. # 4. Rebase any pending broken MRs on top of the commit which makes the CI job # non-fatal, so that development on `main` is unblocked. msys2-mingw32: extends: .only-default-and-merges stage: build tags: - win32-ps needs: [] variables: MSYSTEM: "MINGW32" CHERE_INVOKING: "yes" CFLAGS: -coverage -ftest-coverage -fprofile-arcs PYTHONUTF8: "1" script: - C:\msys64\usr\bin\pacman --noconfirm -Syyuu --ask 20 - C:\msys64\usr\bin\bash .gitlab-ci/show-execution-environment.sh - C:\msys64\usr\bin\bash -lc "bash -x ./.gitlab-ci/test-msys2.sh" artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - _build/meson-logs - _coverage/ - _reference/ # See the note about msys2 CI job failure policy above. msys2-clang64: extends: .only-schedules-or-manual stage: build tags: - win32-ps needs: [] variables: MSYSTEM: "CLANG64" CHERE_INVOKING: "yes" PYTHONUTF8: "1" script: - C:\msys64\usr\bin\pacman --noconfirm -Syyuu --ask 20 - C:\msys64\usr\bin\bash .gitlab-ci/show-execution-environment.sh - C:\msys64\usr\bin\bash -lc "bash -x ./.gitlab-ci/test-msys2.sh" artifacts: reports: junit: "_build/meson-logs/testlog.junit.xml" name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - _build/meson-logs vs2017-x64: extends: .only-default stage: build tags: - win32-ps needs: [] variables: PYTHONUTF8: "1" script: # FIXME: These should use --wrap-mode=nodownload but the Windows CI machines # aren’t currently set up for that. - .gitlab-ci/test-msvc.bat ${MESON_COMMON_OPTIONS} --wrap-mode=default --python.platlibdir=C:\Python37\site-packages --python.purelibdir=C:\Python37\site-packages artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - _build/meson-logs - _build/glib/libglib-2.0-0.dll - _build/gio/libgio-2.0-0.dll - _build/gmodule/libgmodule-2.0-0.dll - _build/gthread/libgthread-2.0-0.dll - _build/gobject/libgobject-2.0-0.dll vs2017-x64-static: extends: .only-default stage: build tags: - win32-ps needs: [] variables: PYTHONUTF8: "1" script: # FIXME: These should use --wrap-mode=nodownload but the Windows CI machines # aren’t currently set up for that. - .gitlab-ci/test-msvc.bat ${MESON_COMMON_OPTIONS} --wrap-mode=default --default-library=static --python.platlibdir=C:\Python37\site-packages --python.purelibdir=C:\Python37\site-packages artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - _build/meson-logs freebsd-13-x86_64: extends: .only-origin-or-manual stage: build tags: - freebsd-13 needs: [] variables: CPPFLAGS: -I/usr/local/include LDFLAGS: -L/usr/local/lib -Wl,--disable-new-dtags LANG: C.UTF-8 before_script: - bash .gitlab-ci/show-execution-environment.sh script: # FIXME: We can’t use ${MESON_COMMON_OPTIONS} here because the FreeBSD 13 # runner has Meson 1.3 installed. This has an API hole where previous # methods of getting paths from files() objects are rejected as deprecated, # but no replacements are available. Hence, we can’t build with # --fatal-meson-warnings. This should be fixed in Meson 1.4. It’s also fine # with Meson 1.2.3 (which is what we use on all the other CI runners). # See https://github.com/GNOME/glib/commit/71061fdcb33b8c26f5f8467cb3ac10704d65c87d - meson setup --buildtype debug --wrap-mode=nodownload --localstatedir=/var -Db_lundef=false -Dxattr=false _build - meson compile -C _build - bash -x ./.gitlab-ci/run-tests.sh artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_build/config.h" - "_build/glib/glibconfig.h" - "_build/meson-logs" macos-x86_64: # The macOS runner is not allowed in forks. This is about trust, not capacity. extends: .only-origin stage: build tags: - macosintel needs: [] cache: [] variables: GIT_SUBMODULE_STRATEGY: normal # -Wno-overlength-strings # libpcre2 gets built as a subproject, but the default Clang options on # macOS limit string lengths to 4095B — pcre2_error.c has a string of length # 4380B CFLAGS: "-Wno-overlength-strings" # redirect to the runner's volatile temporary directory TMPDIR: /Users/Shared/work/tmp # keep the user profile clean PIP_CACHE_DIR: /Users/Shared/build/cache PIPENV_CACHE_DIR: $PIP_CACHE_DIR PYTHONPYCACHEPREFIX: $PIP_CACHE_DIR # target OS X 10.9 Mavericks for backward compatibility SDKROOT: /opt/sdks/MacOSX10.9.sdk # use the runner's ccache directory CCACHE_DIR: /Users/Shared/work/ccache before_script: - bash .gitlab-ci/show-execution-environment.sh - python3 -m venv .venv - ln -s /opt/cmake/CMake.app/Contents/bin/cmake .venv/bin - ln -s /opt/ccache/ccache .venv/bin - source .venv/bin/activate - pip3 install meson==1.2.3 - pip3 install ninja==1.11.1 - pip3 install packaging==23.2 script: # FIXME: Use --wrap-mode=default so we download dependencies each time, # until the macOS runner is a VM where we can use a pre-made image which # already contains the dependencies. See: # - https://gitlab.gnome.org/GNOME/glib/merge_requests/388 # - https://gitlab.gnome.org/Infrastructure/Infrastructure/issues/225 - meson setup ${MESON_COMMON_OPTIONS} --wrap-mode=default --werror _build - meson compile -C _build - .gitlab-ci/run-tests.sh artifacts: reports: junit: - _build/meson-logs/testlog.junit.xml - _build/meson-logs/testlog-*.junit.xml name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_build/config.h" - "_build/glib/glibconfig.h" - "_build/meson-logs" coverage: extends: .only-default image: $FEDORA_IMAGE stage: coverage needs: ['fedora-x86_64', 'msys2-mingw32'] artifacts: name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" expire_in: 1 week expose_as: 'Coverage Report' paths: - _coverage/coverage/index.html - _coverage reports: coverage_report: coverage_format: cobertura path: _coverage/*-cobertura/cobertura-*.xml before_script: - bash .gitlab-ci/show-execution-environment.sh script: - bash -x ./.gitlab-ci/coverage-docker.sh coverage: '/^\s+lines\.+:\s+([\d.]+\%)\s+/' scan-build: extends: - .build-linux - .only-schedules-or-manual image: $FEDORA_IMAGE stage: analysis needs: [] variables: # FIXME: Eventually we want static analysis on the tests and copylibs, for # code quality, but for the moment it’s just busywork. # FIXME: Disable the dead code checkers for now because they create a lot of # noise and don’t indicate high severity problems. SCAN_BUILD_FLAGS: >- --exclude gio/tests/ --exclude girepository/tests/ --exclude glib/tests/ --exclude gmodule/tests/ --exclude gobject/tests/ --exclude gthread/tests/ --exclude girepository/cmph/ --exclude glib/libcharset/ --exclude gio/xdgmime/ -disable-checker deadcode.DeadStores --status-bugs script: - meson setup ${MESON_COMMON_OPTIONS} --werror --default-library=both --prefix=$HOME/glib-installed --localstatedir=/var --libdir=lib -Dglib_debug=enabled -Dsystemtap=true -Ddtrace=true -Dinstalled_tests=true -Dintrospection=enabled _scan_build - SCANBUILD="$(pwd)/.gitlab-ci/scan-build.sh" ninja -C _scan_build scan-build artifacts: name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "_scan_build/meson-logs/scanbuild" .coverity: extends: - .build-linux - .only-schedules-or-manual-in-default-branch image: $COVERITY_IMAGE stage: analysis needs: [] variables: # cov-build doesn’t like GLIB_DEPRECATED_ENUMERATOR CFLAGS: '-DGLIB_DISABLE_DEPRECATION_WARNINGS' script: - meson setup ${MESON_COMMON_OPTIONS} --werror --default-library=both --prefix=$HOME/glib-installed --localstatedir=/var --libdir=lib -Dsystemtap=true -Ddtrace=true -Dinstalled_tests=true -Dintrospection=enabled _coverity_build - $HOME/cov-analysis-linux64-*/bin/cov-build --dir cov-int meson compile -C _coverity_build - tar cfz cov-int.tar.gz cov-int - curl https://scan.coverity.com/builds?project=$COVERITY_SCAN_PROJECT_NAME --form token=$COVERITY_SCAN_TOKEN --form email=$GITLAB_USER_EMAIL --form file=@cov-int.tar.gz --form version="$CI_COMMIT_SHA" --form description="$CI_COMMIT_SHA / $CI_COMMIT_TITLE / $CI_COMMIT_REF_NAME:$CI_PIPELINE_ID" artifacts: name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}" when: always expire_in: 1 week paths: - "cov-int/build-log.txt" pages: extends: .only-schedules stage: deploy needs: ['coverage', 'style-check-advisory'] script: - mv _coverage/ public/ artifacts: paths: - public dist-job: image: $FEDORA_IMAGE stage: build only: - tags script: # Ignore extra git security checks as we don't care in CI. - git config --global --add safe.directory "${PWD}" - git submodule update --init - for m in $(git submodule foreach -q 'echo $path'); do git config --global --add safe.directory "${PWD}/${m}"; done - meson subprojects download - meson setup ${MESON_COMMON_OPTIONS} --buildtype release -Ddocumentation=true -Dman-pages=enabled _build - meson dist -C _build # Compile again to build the docs - meson compile -C _build - tar -c -J -f "glib-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/glib glib-2.0 - tar -c -J -f "gmodule-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/gmodule gmodule-2.0 - tar -c -J -f "gobject-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/gobject gobject-2.0 - tar -c -J -f "gio-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/gio gio-2.0 - tar -c -J -f "girepository-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/girepository girepository-2.0 artifacts: paths: - "${CI_PROJECT_DIR}/_build/glib-docs-$CI_COMMIT_TAG.tar.xz" - "${CI_PROJECT_DIR}/_build/gmodule-docs-$CI_COMMIT_TAG.tar.xz" - "${CI_PROJECT_DIR}/_build/gobject-docs-$CI_COMMIT_TAG.tar.xz" - "${CI_PROJECT_DIR}/_build/gio-docs-$CI_COMMIT_TAG.tar.xz" - "${CI_PROJECT_DIR}/_build/girepository-docs-$CI_COMMIT_TAG.tar.xz" - "${CI_PROJECT_DIR}/_build/meson-dist/glib-*.tar.xz" issue-bot: stage: report image: registry.gitlab.com/gitlab-org/distribution/issue-bot:latest script: /issue-bot rules: - if: $CI_COMMIT_REF_NAME == $CI_DEFAULT_BRANCH && $CI_PIPELINE_SOURCE == "schedule" when: on_failure