/* * Copyright © 2010 Codethink Limited * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU Lesser General Public License as published * by the Free Software Foundation; either version 2 of the licence or (at * your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General * Public License along with this library; if not, write to the * Free Software Foundation, Inc., 59 Temple Place, Suite 330, * Boston, MA 02111-1307, USA. * * Authors: Ryan Lortie */ /* Prologue {{{1 */ #include "config.h" #include "gapplication.h" #include "gapplicationcommandline.h" #include "gsimpleactiongroup.h" #include "gremoteactiongroup.h" #include "gapplicationimpl.h" #include "gactiongroup.h" #include "gactionmap.h" #include "gmenumodel.h" #include "gsettings.h" #include "gioenumtypes.h" #include "gioenums.h" #include "gfile.h" #include "glibintl.h" #include /** * SECTION:gapplication * @title: GApplication * @short_description: Core application class * * A #GApplication is the foundation of an application, unique for a * given application identifier. The GApplication class wraps some * low-level platform-specific services and is intended to act as the * foundation for higher-level application classes such as * #GtkApplication or #MxApplication. In general, you should not use * this class outside of a higher level framework. * * One of the core features that GApplication provides is process * uniqueness, in the context of a "session". The session concept is * platform-dependent, but corresponds roughly to a graphical desktop * login. When your application is launched again, its arguments * are passed through platform communication to the already running * program. The already running instance of the program is called the * primary instance. On Linux, the D-Bus session * bus is used for communication. * * GApplication provides convenient life cycle management by maintaining * a use count for the primary application instance. * The use count can be changed using g_application_hold() and * g_application_release(). If it drops to zero, the application exits. * Higher-level classes such as #GtkApplication employ the use count to * ensure that the application stays alive as long as it has any opened * windows. * * Before using GApplication, you must choose an "application identifier". * The expected form of an application identifier is very close to that of * of a DBus bus name. * Examples include: "com.example.MyApp", "org.example.internal-apps.Calculator". * For details on valid application identifiers, see g_application_id_is_valid(). * * On Linux, the application identifier is claimed as a well-known bus name * on the user's session bus. This means that the uniqueness of your * application is scoped to the current session. It also means that your * application may provide additional services (through registration of other * object paths) at that bus name. The registration of these object paths * should be done with the shared GDBus session bus. Note that due to the * internal architecture of GDBus, method calls can be dispatched at any time * (even if a main loop is not running). For this reason, you must ensure that * any object paths that you wish to register are registered before #GApplication * attempts to acquire the bus name of your application (which happens in * g_application_register()). Unfortunately, this means that you cannot use * g_application_get_is_remote() to decide if you want to register object paths. * * GApplication also implements the #GActionGroup and #GActionMap * interfaces and lets you easily export actions by adding them with * g_action_map_add_action(). When invoking an action by calling * g_action_group_activate_action() on the application, it is always * invoked in the primary instance. The actions are also exported on * the session bus, and GIO provides the #GDBusActionGroup wrapper to * conveniently access them remotely. GIO provides a #GDBusMenuModel wrapper * for remote access to exported #GMenuModels. * * There is a number of different entry points into a GApplication: * * via 'Activate' (i.e. just starting the application) * via 'Open' (i.e. opening some files) * by handling a command-line * via activating an action * * The #GApplication::startup signal lets you handle the application * initialization for all of these in a single place. * * Regardless of which of these entry points is used to start the application, * GApplication passes some platform * data from the launching instance to the primary instance, * in the form of a #GVariant dictionary mapping strings to variants. * To use platform data, override the @before_emit or @after_emit virtual * functions in your #GApplication subclass. When dealing with * #GApplicationCommandLine objects, the platform data is directly * available via g_application_command_line_get_cwd(), * g_application_command_line_get_environ() and * g_application_command_line_get_platform_data(). * * As the name indicates, the platform data may vary depending on the * operating system, but it always includes the current directory (key * "cwd"), and optionally the environment (ie the set of environment * variables and their values) of the calling process (key "environ"). * The environment is only added to the platform data if the * %G_APPLICATION_SEND_ENVIRONMENT flag is set. #GApplication subclasses * can add their own platform data by overriding the @add_platform_data * virtual function. For instance, #GtkApplication adds startup notification * data in this way. * * To parse commandline arguments you may handle the * #GApplication::command-line signal or override the local_command_line() * vfunc, to parse them in either the primary instance or the local instance, * respectively. * * Opening files with a GApplication * * * FIXME: MISSING XINCLUDE CONTENT * * * * * A GApplication with actions * * * FIXME: MISSING XINCLUDE CONTENT * * * * * A GApplication with menus * * * FIXME: MISSING XINCLUDE CONTENT * * * */ /** * GApplicationClass: * @startup: invoked on the primary instance immediately after registration * @shutdown: invoked only on the registered primary instance immediately * after the main loop terminates * @activate: invoked on the primary instance when an activation occurs * @open: invoked on the primary instance when there are files to open * @command_line: invoked on the primary instance when a command-line is * not handled locally * @local_command_line: invoked (locally) when the process has been invoked * via commandline execution (as opposed to, say, D-Bus activation - which * is not currently supported by GApplication). The virtual function has * the chance to inspect (and possibly replace) the list of command line * arguments. See g_application_run() for more information. * @before_emit: invoked on the primary instance before 'activate', 'open', * 'command-line' or any action invocation, gets the 'platform data' from * the calling instance * @after_emit: invoked on the primary instance after 'activate', 'open', * 'command-line' or any action invocation, gets the 'platform data' from * the calling instance * @add_platform_data: invoked (locally) to add 'platform data' to be sent to * the primary instance when activating, opening or invoking actions * @quit_mainloop: Used to be invoked on the primary instance when the use * count of the application drops to zero (and after any inactivity * timeout, if requested). Not used anymore since 2.32 * @run_mainloop: Used to be invoked on the primary instance from * g_application_run() if the use-count is non-zero. Since 2.32, * GApplication is iterating the main context directly and is not * using @run_mainloop anymore * * Virtual function table for #GApplication. * * Since: 2.28 */ struct _GApplicationPrivate { GApplicationFlags flags; gchar *id; GActionGroup *actions; GMenuModel *app_menu; GMenuModel *menubar; guint inactivity_timeout_id; guint inactivity_timeout; guint use_count; guint is_registered : 1; guint is_remote : 1; guint did_startup : 1; guint did_shutdown : 1; guint must_quit_now : 1; GRemoteActionGroup *remote_actions; GApplicationImpl *impl; }; enum { PROP_NONE, PROP_APPLICATION_ID, PROP_FLAGS, PROP_IS_REGISTERED, PROP_IS_REMOTE, PROP_INACTIVITY_TIMEOUT, PROP_ACTION_GROUP }; enum { SIGNAL_STARTUP, SIGNAL_SHUTDOWN, SIGNAL_ACTIVATE, SIGNAL_OPEN, SIGNAL_ACTION, SIGNAL_COMMAND_LINE, NR_SIGNALS }; static guint g_application_signals[NR_SIGNALS]; static void g_application_action_group_iface_init (GActionGroupInterface *); static void g_application_action_map_iface_init (GActionMapInterface *); G_DEFINE_TYPE_WITH_CODE (GApplication, g_application, G_TYPE_OBJECT, G_IMPLEMENT_INTERFACE (G_TYPE_ACTION_GROUP, g_application_action_group_iface_init) G_IMPLEMENT_INTERFACE (G_TYPE_ACTION_MAP, g_application_action_map_iface_init)) /* GApplicationExportedActions {{{1 */ /* We create a subclass of GSimpleActionGroup that implements * GRemoteActionGroup and deals with the platform data using * GApplication's before/after_emit vfuncs. This is the action group we * will be exporting. * * We could implement GRemoteActionGroup on GApplication directly, but * this would be potentially extremely confusing to have exposed as part * of the public API of GApplication. We certainly don't want anyone in * the same process to be calling these APIs... */ typedef GSimpleActionGroupClass GApplicationExportedActionsClass; typedef struct { GSimpleActionGroup parent_instance; GApplication *application; } GApplicationExportedActions; static GType g_application_exported_actions_get_type (void); static void g_application_exported_actions_iface_init (GRemoteActionGroupInterface *iface); G_DEFINE_TYPE_WITH_CODE (GApplicationExportedActions, g_application_exported_actions, G_TYPE_SIMPLE_ACTION_GROUP, G_IMPLEMENT_INTERFACE (G_TYPE_REMOTE_ACTION_GROUP, g_application_exported_actions_iface_init)) static void g_application_exported_actions_activate_action_full (GRemoteActionGroup *remote, const gchar *action_name, GVariant *parameter, GVariant *platform_data) { GApplicationExportedActions *exported = (GApplicationExportedActions *) remote; G_APPLICATION_GET_CLASS (exported->application) ->before_emit (exported->application, platform_data); g_action_group_activate_action (G_ACTION_GROUP (exported), action_name, parameter); G_APPLICATION_GET_CLASS (exported->application) ->after_emit (exported->application, platform_data); } static void g_application_exported_actions_change_action_state_full (GRemoteActionGroup *remote, const gchar *action_name, GVariant *value, GVariant *platform_data) { GApplicationExportedActions *exported = (GApplicationExportedActions *) remote; G_APPLICATION_GET_CLASS (exported->application) ->before_emit (exported->application, platform_data); g_action_group_change_action_state (G_ACTION_GROUP (exported), action_name, value); G_APPLICATION_GET_CLASS (exported->application) ->after_emit (exported->application, platform_data); } static void g_application_exported_actions_init (GApplicationExportedActions *actions) { } static void g_application_exported_actions_iface_init (GRemoteActionGroupInterface *iface) { iface->activate_action_full = g_application_exported_actions_activate_action_full; iface->change_action_state_full = g_application_exported_actions_change_action_state_full; } static void g_application_exported_actions_class_init (GApplicationExportedActionsClass *class) { } static GActionGroup * g_application_exported_actions_new (GApplication *application) { GApplicationExportedActions *actions; actions = g_object_new (g_application_exported_actions_get_type (), NULL); actions->application = application; return G_ACTION_GROUP (actions); } /* vfunc defaults {{{1 */ static void g_application_real_before_emit (GApplication *application, GVariant *platform_data) { } static void g_application_real_after_emit (GApplication *application, GVariant *platform_data) { } static void g_application_real_startup (GApplication *application) { application->priv->did_startup = TRUE; } static void g_application_real_shutdown (GApplication *application) { application->priv->did_shutdown = TRUE; } static void g_application_real_activate (GApplication *application) { if (!g_signal_has_handler_pending (application, g_application_signals[SIGNAL_ACTIVATE], 0, TRUE) && G_APPLICATION_GET_CLASS (application)->activate == g_application_real_activate) { static gboolean warned; if (warned) return; g_warning ("Your application does not implement " "g_application_activate() and has no handlers connected " "to the 'activate' signal. It should do one of these."); warned = TRUE; } } static void g_application_real_open (GApplication *application, GFile **files, gint n_files, const gchar *hint) { if (!g_signal_has_handler_pending (application, g_application_signals[SIGNAL_OPEN], 0, TRUE) && G_APPLICATION_GET_CLASS (application)->open == g_application_real_open) { static gboolean warned; if (warned) return; g_warning ("Your application claims to support opening files " "but does not implement g_application_open() and has no " "handlers connected to the 'open' signal."); warned = TRUE; } } static int g_application_real_command_line (GApplication *application, GApplicationCommandLine *cmdline) { if (!g_signal_has_handler_pending (application, g_application_signals[SIGNAL_COMMAND_LINE], 0, TRUE) && G_APPLICATION_GET_CLASS (application)->command_line == g_application_real_command_line) { static gboolean warned; if (warned) return 1; g_warning ("Your application claims to support custom command line " "handling but does not implement g_application_command_line() " "and has no handlers connected to the 'command-line' signal."); warned = TRUE; } return 1; } static gboolean g_application_real_local_command_line (GApplication *application, gchar ***arguments, int *exit_status) { if (application->priv->flags & G_APPLICATION_HANDLES_COMMAND_LINE) return FALSE; else { GError *error = NULL; gint n_args; if (!g_application_register (application, NULL, &error)) { g_critical ("%s", error->message); g_error_free (error); *exit_status = 1; return TRUE; } n_args = g_strv_length (*arguments); if (application->priv->flags & G_APPLICATION_IS_SERVICE) { if ((*exit_status = n_args > 1)) { g_printerr ("GApplication service mode takes no arguments.\n"); application->priv->flags &= ~G_APPLICATION_IS_SERVICE; } return TRUE; } if (n_args <= 1) { g_application_activate (application); *exit_status = 0; } else { if (~application->priv->flags & G_APPLICATION_HANDLES_OPEN) { g_critical ("This application can not open files."); *exit_status = 1; } else { GFile **files; gint n_files; gint i; n_files = n_args - 1; files = g_new (GFile *, n_files); for (i = 0; i < n_files; i++) files[i] = g_file_new_for_commandline_arg ((*arguments)[i + 1]); g_application_open (application, files, n_files, ""); for (i = 0; i < n_files; i++) g_object_unref (files[i]); g_free (files); *exit_status = 0; } } return TRUE; } } static void g_application_real_add_platform_data (GApplication *application, GVariantBuilder *builder) { } /* GObject implementation stuff {{{1 */ static void g_application_set_property (GObject *object, guint prop_id, const GValue *value, GParamSpec *pspec) { GApplication *application = G_APPLICATION (object); switch (prop_id) { case PROP_APPLICATION_ID: g_application_set_application_id (application, g_value_get_string (value)); break; case PROP_FLAGS: g_application_set_flags (application, g_value_get_flags (value)); break; case PROP_INACTIVITY_TIMEOUT: g_application_set_inactivity_timeout (application, g_value_get_uint (value)); break; case PROP_ACTION_GROUP: g_clear_object (&application->priv->actions); application->priv->actions = g_value_dup_object (value); break; default: g_assert_not_reached (); } } /** * g_application_set_action_group: * @application: a #GApplication * @action_group: (allow-none): a #GActionGroup, or %NULL * * This used to be how actions were associated with a #GApplication. * Now there is #GActionMap for that. * * Since: 2.28 * * Deprecated:2.32:Use the #GActionMap interface instead. Never ever * mix use of this API with use of #GActionMap on the same @application * or things will go very badly wrong. This function is known to * introduce buggy behaviour (ie: signals not emitted on changes to the * action group), so you should really use #GActionMap instead. **/ void g_application_set_action_group (GApplication *application, GActionGroup *action_group) { g_return_if_fail (G_IS_APPLICATION (application)); g_return_if_fail (!application->priv->is_registered); if (application->priv->actions != NULL) g_object_unref (application->priv->actions); application->priv->actions = action_group; if (application->priv->actions != NULL) g_object_ref (application->priv->actions); } static void g_application_get_property (GObject *object, guint prop_id, GValue *value, GParamSpec *pspec) { GApplication *application = G_APPLICATION (object); switch (prop_id) { case PROP_APPLICATION_ID: g_value_set_string (value, g_application_get_application_id (application)); break; case PROP_FLAGS: g_value_set_flags (value, g_application_get_flags (application)); break; case PROP_IS_REGISTERED: g_value_set_boolean (value, g_application_get_is_registered (application)); break; case PROP_IS_REMOTE: g_value_set_boolean (value, g_application_get_is_remote (application)); break; case PROP_INACTIVITY_TIMEOUT: g_value_set_uint (value, g_application_get_inactivity_timeout (application)); break; default: g_assert_not_reached (); } } static void g_application_constructed (GObject *object) { GApplication *application = G_APPLICATION (object); g_assert (application->priv->id != NULL); if (g_application_get_default () == NULL) g_application_set_default (application); } static void g_application_finalize (GObject *object) { GApplication *application = G_APPLICATION (object); if (application->priv->impl) g_application_impl_destroy (application->priv->impl); g_free (application->priv->id); if (g_application_get_default () == application) g_application_set_default (NULL); if (application->priv->actions) g_object_unref (application->priv->actions); G_OBJECT_CLASS (g_application_parent_class) ->finalize (object); } static void g_application_init (GApplication *application) { application->priv = G_TYPE_INSTANCE_GET_PRIVATE (application, G_TYPE_APPLICATION, GApplicationPrivate); application->priv->actions = g_application_exported_actions_new (application); /* application->priv->actions is the one and only ref on the group, so when * we dispose, the action group will die, disconnecting all signals. */ g_signal_connect_swapped (application->priv->actions, "action-added", G_CALLBACK (g_action_group_action_added), application); g_signal_connect_swapped (application->priv->actions, "action-enabled-changed", G_CALLBACK (g_action_group_action_enabled_changed), application); g_signal_connect_swapped (application->priv->actions, "action-state-changed", G_CALLBACK (g_action_group_action_state_changed), application); g_signal_connect_swapped (application->priv->actions, "action-removed", G_CALLBACK (g_action_group_action_removed), application); } static void g_application_class_init (GApplicationClass *class) { GObjectClass *object_class = G_OBJECT_CLASS (class); object_class->constructed = g_application_constructed; object_class->finalize = g_application_finalize; object_class->get_property = g_application_get_property; object_class->set_property = g_application_set_property; class->before_emit = g_application_real_before_emit; class->after_emit = g_application_real_after_emit; class->startup = g_application_real_startup; class->shutdown = g_application_real_shutdown; class->activate = g_application_real_activate; class->open = g_application_real_open; class->command_line = g_application_real_command_line; class->local_command_line = g_application_real_local_command_line; class->add_platform_data = g_application_real_add_platform_data; g_object_class_install_property (object_class, PROP_APPLICATION_ID, g_param_spec_string ("application-id", P_("Application identifier"), P_("The unique identifier for the application"), NULL, G_PARAM_READWRITE | G_PARAM_CONSTRUCT | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (object_class, PROP_FLAGS, g_param_spec_flags ("flags", P_("Application flags"), P_("Flags specifying the behaviour of the application"), G_TYPE_APPLICATION_FLAGS, G_APPLICATION_FLAGS_NONE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (object_class, PROP_IS_REGISTERED, g_param_spec_boolean ("is-registered", P_("Is registered"), P_("If g_application_register() has been called"), FALSE, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (object_class, PROP_IS_REMOTE, g_param_spec_boolean ("is-remote", P_("Is remote"), P_("If this application instance is remote"), FALSE, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (object_class, PROP_INACTIVITY_TIMEOUT, g_param_spec_uint ("inactivity-timeout", P_("Inactivity timeout"), P_("Time (ms) to stay alive after becoming idle"), 0, G_MAXUINT, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (object_class, PROP_ACTION_GROUP, g_param_spec_object ("action-group", P_("Action group"), P_("The group of actions that the application exports"), G_TYPE_ACTION_GROUP, G_PARAM_DEPRECATED | G_PARAM_WRITABLE | G_PARAM_STATIC_STRINGS)); /** * GApplication::startup: * @application: the application * * The ::startup signal is emitted on the primary instance immediately * after registration. See g_application_register(). */ g_application_signals[SIGNAL_STARTUP] = g_signal_new ("startup", G_TYPE_APPLICATION, G_SIGNAL_RUN_FIRST, G_STRUCT_OFFSET (GApplicationClass, startup), NULL, NULL, g_cclosure_marshal_VOID__VOID, G_TYPE_NONE, 0); /** * GApplication::shutdown: * @application: the application * * The ::shutdown signal is emitted only on the registered primary instance * immediately after the main loop terminates. */ g_application_signals[SIGNAL_SHUTDOWN] = g_signal_new ("shutdown", G_TYPE_APPLICATION, G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GApplicationClass, shutdown), NULL, NULL, g_cclosure_marshal_VOID__VOID, G_TYPE_NONE, 0); /** * GApplication::activate: * @application: the application * * The ::activate signal is emitted on the primary instance when an * activation occurs. See g_application_activate(). */ g_application_signals[SIGNAL_ACTIVATE] = g_signal_new ("activate", G_TYPE_APPLICATION, G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GApplicationClass, activate), NULL, NULL, g_cclosure_marshal_VOID__VOID, G_TYPE_NONE, 0); /** * GApplication::open: * @application: the application * @files: (array length=n_files) (element-type GFile): an array of #GFiles * @n_files: the length of @files * @hint: a hint provided by the calling instance * * The ::open signal is emitted on the primary instance when there are * files to open. See g_application_open() for more information. */ g_application_signals[SIGNAL_OPEN] = g_signal_new ("open", G_TYPE_APPLICATION, G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GApplicationClass, open), NULL, NULL, NULL, G_TYPE_NONE, 3, G_TYPE_POINTER, G_TYPE_INT, G_TYPE_STRING); /** * GApplication::command-line: * @application: the application * @command_line: a #GApplicationCommandLine representing the * passed commandline * * The ::command-line signal is emitted on the primary instance when * a commandline is not handled locally. See g_application_run() and * the #GApplicationCommandLine documentation for more information. * * Returns: An integer that is set as the exit status for the calling * process. See g_application_command_line_set_exit_status(). */ g_application_signals[SIGNAL_COMMAND_LINE] = g_signal_new ("command-line", G_TYPE_APPLICATION, G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GApplicationClass, command_line), g_signal_accumulator_first_wins, NULL, NULL, G_TYPE_INT, 1, G_TYPE_APPLICATION_COMMAND_LINE); g_type_class_add_private (class, sizeof (GApplicationPrivate)); } static GVariant * get_platform_data (GApplication *application) { GVariantBuilder *builder; GVariant *result; builder = g_variant_builder_new (G_VARIANT_TYPE ("a{sv}")); { gchar *cwd = g_get_current_dir (); g_variant_builder_add (builder, "{sv}", "cwd", g_variant_new_bytestring (cwd)); g_free (cwd); } if (application->priv->flags & G_APPLICATION_SEND_ENVIRONMENT) { GVariant *array; gchar **envp; envp = g_get_environ (); array = g_variant_new_bytestring_array ((const gchar **) envp, -1); g_strfreev (envp); g_variant_builder_add (builder, "{sv}", "environ", array); } G_APPLICATION_GET_CLASS (application)-> add_platform_data (application, builder); result = g_variant_builder_end (builder); g_variant_builder_unref (builder); return result; } /* Application ID validity {{{1 */ /** * g_application_id_is_valid: * @application_id: a potential application identifier * * Checks if @application_id is a valid application identifier. * * A valid ID is required for calls to g_application_new() and * g_application_set_application_id(). * * For convenience, the restrictions on application identifiers are * reproduced here: * * Application identifiers must contain only the ASCII characters "[A-Z][a-z][0-9]_-." and must not begin with a digit. * Application identifiers must contain at least one '.' (period) character (and thus at least three elements). * Application identifiers must not begin or end with a '.' (period) character. * Application identifiers must not contain consecutive '.' (period) characters. * Application identifiers must not exceed 255 characters. * * * Returns: %TRUE if @application_id is valid **/ gboolean g_application_id_is_valid (const gchar *application_id) { gsize len; gboolean allow_dot; gboolean has_dot; len = strlen (application_id); if (len > 255) return FALSE; if (!g_ascii_isalpha (application_id[0])) return FALSE; if (application_id[len-1] == '.') return FALSE; application_id++; allow_dot = TRUE; has_dot = FALSE; for (; *application_id; application_id++) { if (g_ascii_isalnum (*application_id) || (*application_id == '-') || (*application_id == '_')) { allow_dot = TRUE; } else if (allow_dot && *application_id == '.') { has_dot = TRUE; allow_dot = FALSE; } else return FALSE; } if (!has_dot) return FALSE; return TRUE; } /* Public Constructor {{{1 */ /** * g_application_new: * @application_id: the application id * @flags: the application flags * * Creates a new #GApplication instance. * * This function calls g_type_init() for you. * * The application id must be valid. See g_application_id_is_valid(). * * Returns: a new #GApplication instance **/ GApplication * g_application_new (const gchar *application_id, GApplicationFlags flags) { g_return_val_if_fail (g_application_id_is_valid (application_id), NULL); g_type_init (); return g_object_new (G_TYPE_APPLICATION, "application-id", application_id, "flags", flags, NULL); } /* Simple get/set: application id, flags, inactivity timeout {{{1 */ /** * g_application_get_application_id: * @application: a #GApplication * * Gets the unique identifier for @application. * * Returns: the identifier for @application, owned by @application * * Since: 2.28 **/ const gchar * g_application_get_application_id (GApplication *application) { g_return_val_if_fail (G_IS_APPLICATION (application), NULL); return application->priv->id; } /** * g_application_set_application_id: * @application: a #GApplication * @application_id: the identifier for @application * * Sets the unique identifier for @application. * * The application id can only be modified if @application has not yet * been registered. * * The application id must be valid. See g_application_id_is_valid(). * * Since: 2.28 **/ void g_application_set_application_id (GApplication *application, const gchar *application_id) { g_return_if_fail (G_IS_APPLICATION (application)); if (g_strcmp0 (application->priv->id, application_id) != 0) { g_return_if_fail (g_application_id_is_valid (application_id)); g_return_if_fail (!application->priv->is_registered); g_free (application->priv->id); application->priv->id = g_strdup (application_id); g_object_notify (G_OBJECT (application), "application-id"); } } /** * g_application_get_flags: * @application: a #GApplication * * Gets the flags for @application. * * See #GApplicationFlags. * * Returns: the flags for @application * * Since: 2.28 **/ GApplicationFlags g_application_get_flags (GApplication *application) { g_return_val_if_fail (G_IS_APPLICATION (application), 0); return application->priv->flags; } /** * g_application_set_flags: * @application: a #GApplication * @flags: the flags for @application * * Sets the flags for @application. * * The flags can only be modified if @application has not yet been * registered. * * See #GApplicationFlags. * * Since: 2.28 **/ void g_application_set_flags (GApplication *application, GApplicationFlags flags) { g_return_if_fail (G_IS_APPLICATION (application)); if (application->priv->flags != flags) { g_return_if_fail (!application->priv->is_registered); application->priv->flags = flags; g_object_notify (G_OBJECT (application), "flags"); } } /** * g_application_get_inactivity_timeout: * @application: a #GApplication * * Gets the current inactivity timeout for the application. * * This is the amount of time (in milliseconds) after the last call to * g_application_release() before the application stops running. * * Returns: the timeout, in milliseconds * * Since: 2.28 **/ guint g_application_get_inactivity_timeout (GApplication *application) { g_return_val_if_fail (G_IS_APPLICATION (application), 0); return application->priv->inactivity_timeout; } /** * g_application_set_inactivity_timeout: * @application: a #GApplication * @inactivity_timeout: the timeout, in milliseconds * * Sets the current inactivity timeout for the application. * * This is the amount of time (in milliseconds) after the last call to * g_application_release() before the application stops running. * * This call has no side effects of its own. The value set here is only * used for next time g_application_release() drops the use count to * zero. Any timeouts currently in progress are not impacted. * * Since: 2.28 **/ void g_application_set_inactivity_timeout (GApplication *application, guint inactivity_timeout) { g_return_if_fail (G_IS_APPLICATION (application)); if (application->priv->inactivity_timeout != inactivity_timeout) { application->priv->inactivity_timeout = inactivity_timeout; g_object_notify (G_OBJECT (application), "inactivity-timeout"); } } /* Read-only property getters (is registered, is remote) {{{1 */ /** * g_application_get_is_registered: * @application: a #GApplication * * Checks if @application is registered. * * An application is registered if g_application_register() has been * successfully called. * * Returns: %TRUE if @application is registered * * Since: 2.28 **/ gboolean g_application_get_is_registered (GApplication *application) { g_return_val_if_fail (G_IS_APPLICATION (application), FALSE); return application->priv->is_registered; } /** * g_application_get_is_remote: * @application: a #GApplication * * Checks if @application is remote. * * If @application is remote then it means that another instance of * application already exists (the 'primary' instance). Calls to * perform actions on @application will result in the actions being * performed by the primary instance. * * The value of this property cannot be accessed before * g_application_register() has been called. See * g_application_get_is_registered(). * * Returns: %TRUE if @application is remote * * Since: 2.28 **/ gboolean g_application_get_is_remote (GApplication *application) { g_return_val_if_fail (G_IS_APPLICATION (application), FALSE); g_return_val_if_fail (application->priv->is_registered, FALSE); return application->priv->is_remote; } /* Register {{{1 */ /** * g_application_register: * @application: a #GApplication * @cancellable: (allow-none): a #GCancellable, or %NULL * @error: a pointer to a NULL #GError, or %NULL * * Attempts registration of the application. * * This is the point at which the application discovers if it is the * primary instance or merely acting as a remote for an already-existing * primary instance. This is implemented by attempting to acquire the * application identifier as a unique bus name on the session bus using * GDBus. * * Due to the internal architecture of GDBus, method calls can be * dispatched at any time (even if a main loop is not running). For * this reason, you must ensure that any object paths that you wish to * register are registered before calling this function. * * If the application has already been registered then %TRUE is * returned with no work performed. * * The #GApplication::startup signal is emitted if registration succeeds * and @application is the primary instance. * * In the event of an error (such as @cancellable being cancelled, or a * failure to connect to the session bus), %FALSE is returned and @error * is set appropriately. * * Note: the return value of this function is not an indicator that this * instance is or is not the primary instance of the application. See * g_application_get_is_remote() for that. * * Returns: %TRUE if registration succeeded * * Since: 2.28 **/ gboolean g_application_register (GApplication *application, GCancellable *cancellable, GError **error) { g_return_val_if_fail (G_IS_APPLICATION (application), FALSE); if (!application->priv->is_registered) { application->priv->impl = g_application_impl_register (application, application->priv->id, application->priv->flags, application->priv->actions, &application->priv->remote_actions, cancellable, error); if (application->priv->impl == NULL) return FALSE; application->priv->is_remote = application->priv->remote_actions != NULL; application->priv->is_registered = TRUE; g_object_notify (G_OBJECT (application), "is-registered"); if (!application->priv->is_remote) { g_signal_emit (application, g_application_signals[SIGNAL_STARTUP], 0); if (!application->priv->did_startup) g_critical ("GApplication subclass '%s' failed to chain up on" " ::startup (from start of override function)", G_OBJECT_TYPE_NAME (application)); } } return TRUE; } /* Hold/release {{{1 */ /** * g_application_hold: * @application: a #GApplication * * Increases the use count of @application. * * Use this function to indicate that the application has a reason to * continue to run. For example, g_application_hold() is called by GTK+ * when a toplevel window is on the screen. * * To cancel the hold, call g_application_release(). **/ void g_application_hold (GApplication *application) { if (application->priv->inactivity_timeout_id) { g_source_remove (application->priv->inactivity_timeout_id); application->priv->inactivity_timeout_id = 0; } application->priv->use_count++; } static gboolean inactivity_timeout_expired (gpointer data) { GApplication *application = G_APPLICATION (data); application->priv->inactivity_timeout_id = 0; return G_SOURCE_REMOVE; } /** * g_application_release: * @application: a #GApplication * * Decrease the use count of @application. * * When the use count reaches zero, the application will stop running. * * Never call this function except to cancel the effect of a previous * call to g_application_hold(). **/ void g_application_release (GApplication *application) { application->priv->use_count--; if (application->priv->use_count == 0 && application->priv->inactivity_timeout) application->priv->inactivity_timeout_id = g_timeout_add (application->priv->inactivity_timeout, inactivity_timeout_expired, application); } /* Activate, Open {{{1 */ /** * g_application_activate: * @application: a #GApplication * * Activates the application. * * In essence, this results in the #GApplication::activate signal being * emitted in the primary instance. * * The application must be registered before calling this function. * * Since: 2.28 **/ void g_application_activate (GApplication *application) { g_return_if_fail (G_IS_APPLICATION (application)); g_return_if_fail (application->priv->is_registered); if (application->priv->is_remote) g_application_impl_activate (application->priv->impl, get_platform_data (application)); else g_signal_emit (application, g_application_signals[SIGNAL_ACTIVATE], 0); } /** * g_application_open: * @application: a #GApplication * @files: (array length=n_files): an array of #GFiles to open * @n_files: the length of the @files array * @hint: a hint (or ""), but never %NULL * * Opens the given files. * * In essence, this results in the #GApplication::open signal being emitted * in the primary instance. * * @n_files must be greater than zero. * * @hint is simply passed through to the ::open signal. It is * intended to be used by applications that have multiple modes for * opening files (eg: "view" vs "edit", etc). Unless you have a need * for this functionality, you should use "". * * The application must be registered before calling this function * and it must have the %G_APPLICATION_HANDLES_OPEN flag set. * * Since: 2.28 **/ void g_application_open (GApplication *application, GFile **files, gint n_files, const gchar *hint) { g_return_if_fail (G_IS_APPLICATION (application)); g_return_if_fail (application->priv->flags & G_APPLICATION_HANDLES_OPEN); g_return_if_fail (application->priv->is_registered); if (application->priv->is_remote) g_application_impl_open (application->priv->impl, files, n_files, hint, get_platform_data (application)); else g_signal_emit (application, g_application_signals[SIGNAL_OPEN], 0, files, n_files, hint); } /* Run {{{1 */ /** * g_application_run: * @application: a #GApplication * @argc: the argc from main() (or 0 if @argv is %NULL) * @argv: (array length=argc) (allow-none): the argv from main(), or %NULL * * Runs the application. * * This function is intended to be run from main() and its return value * is intended to be returned by main(). Although you are expected to pass * the @argc, @argv parameters from main() to this function, it is possible * to pass %NULL if @argv is not available or commandline handling is not * required. * * First, the local_command_line() virtual function is invoked. * This function always runs on the local instance. It gets passed a pointer * to a %NULL-terminated copy of @argv and is expected to remove the arguments * that it handled (shifting up remaining arguments). See * for an example of * parsing @argv manually. Alternatively, you may use the #GOptionContext API, * after setting argc = g_strv_length (argv);. * * The last argument to local_command_line() is a pointer to the @status * variable which can used to set the exit status that is returned from * g_application_run(). * * If local_command_line() returns %TRUE, the command line is expected * to be completely handled, including possibly registering as the primary * instance, calling g_application_activate() or g_application_open(), etc. * * If local_command_line() returns %FALSE then the application is registered * and the #GApplication::command-line signal is emitted in the primary * instance (which may or may not be this instance). The signal handler * gets passed a #GApplicationCommandLine object that (among other things) * contains the remaining commandline arguments that have not been handled * by local_command_line(). * * If the application has the %G_APPLICATION_HANDLES_COMMAND_LINE * flag set then the default implementation of local_command_line() * always returns %FALSE immediately, resulting in the commandline * always being handled in the primary instance. * * Otherwise, the default implementation of local_command_line() tries * to do a couple of things that are probably reasonable for most * applications. First, g_application_register() is called to attempt * to register the application. If that works, then the command line * arguments are inspected. If no commandline arguments are given, then * g_application_activate() is called. If commandline arguments are * given and the %G_APPLICATION_HANDLES_OPEN flag is set then they * are assumed to be filenames and g_application_open() is called. * * If you need to handle commandline arguments that are not filenames, * and you don't mind commandline handling to happen in the primary * instance, you should set %G_APPLICATION_HANDLES_COMMAND_LINE and * process the commandline arguments in your #GApplication::command-line * signal handler, either manually or using the #GOptionContext API. * * If you are interested in doing more complicated local handling of the * commandline then you should implement your own #GApplication subclass * and override local_command_line(). In this case, you most likely want * to return %TRUE from your local_command_line() implementation to * suppress the default handling. See * for an example. * * If, after the above is done, the use count of the application is zero * then the exit status is returned immediately. If the use count is * non-zero then the default main context is iterated until the use count * falls to zero, at which point 0 is returned. * * If the %G_APPLICATION_IS_SERVICE flag is set, then the exiting at * use count of zero is delayed for a while (ie: the instance stays * around to provide its service to others). * * Returns: the exit status * * Since: 2.28 **/ int g_application_run (GApplication *application, int argc, char **argv) { gchar **arguments; int status; gint i; g_return_val_if_fail (G_IS_APPLICATION (application), 1); g_return_val_if_fail (argc == 0 || argv != NULL, 1); g_return_val_if_fail (!application->priv->must_quit_now, 1); arguments = g_new (gchar *, argc + 1); for (i = 0; i < argc; i++) arguments[i] = g_strdup (argv[i]); arguments[i] = NULL; if (g_get_prgname () == NULL && argc > 0) { gchar *prgname; prgname = g_path_get_basename (argv[0]); g_set_prgname (prgname); g_free (prgname); } if (!G_APPLICATION_GET_CLASS (application) ->local_command_line (application, &arguments, &status)) { GError *error = NULL; if (!g_application_register (application, NULL, &error)) { g_printerr ("%s", error->message); g_error_free (error); return 1; } if (application->priv->is_remote) { GVariant *platform_data; platform_data = get_platform_data (application); status = g_application_impl_command_line (application->priv->impl, arguments, platform_data); } else { GApplicationCommandLine *cmdline; GVariant *v; v = g_variant_new_bytestring_array ((const gchar **) arguments, -1); cmdline = g_object_new (G_TYPE_APPLICATION_COMMAND_LINE, "arguments", v, NULL); g_signal_emit (application, g_application_signals[SIGNAL_COMMAND_LINE], 0, cmdline, &status); g_object_unref (cmdline); } } g_strfreev (arguments); if (application->priv->flags & G_APPLICATION_IS_SERVICE && application->priv->is_registered && !application->priv->use_count && !application->priv->inactivity_timeout_id) { application->priv->inactivity_timeout_id = g_timeout_add (10000, inactivity_timeout_expired, application); } while (application->priv->use_count || application->priv->inactivity_timeout_id) { if (application->priv->must_quit_now) break; g_main_context_iteration (NULL, TRUE); status = 0; } if (!application->priv->is_remote) { g_signal_emit (application, g_application_signals[SIGNAL_SHUTDOWN], 0); if (!application->priv->did_shutdown) g_critical ("GApplication subclass '%s' failed to chain up on" " ::shutdown (from end of override function)", G_OBJECT_TYPE_NAME (application)); } if (application->priv->impl) g_application_impl_flush (application->priv->impl); g_settings_sync (); return status; } static gchar ** g_application_list_actions (GActionGroup *action_group) { GApplication *application = G_APPLICATION (action_group); g_return_val_if_fail (application->priv->is_registered, NULL); if (application->priv->remote_actions != NULL) return g_action_group_list_actions (G_ACTION_GROUP (application->priv->remote_actions)); else if (application->priv->actions != NULL) return g_action_group_list_actions (application->priv->actions); else /* empty string array */ return g_new0 (gchar *, 1); } static gboolean g_application_query_action (GActionGroup *group, const gchar *action_name, gboolean *enabled, const GVariantType **parameter_type, const GVariantType **state_type, GVariant **state_hint, GVariant **state) { GApplication *application = G_APPLICATION (group); g_return_val_if_fail (application->priv->is_registered, FALSE); if (application->priv->remote_actions != NULL) return g_action_group_query_action (G_ACTION_GROUP (application->priv->remote_actions), action_name, enabled, parameter_type, state_type, state_hint, state); if (application->priv->actions != NULL) return g_action_group_query_action (application->priv->actions, action_name, enabled, parameter_type, state_type, state_hint, state); return FALSE; } static void g_application_change_action_state (GActionGroup *action_group, const gchar *action_name, GVariant *value) { GApplication *application = G_APPLICATION (action_group); g_return_if_fail (application->priv->is_remote || application->priv->actions != NULL); g_return_if_fail (application->priv->is_registered); if (application->priv->remote_actions) g_remote_action_group_change_action_state_full (application->priv->remote_actions, action_name, value, get_platform_data (application)); else g_action_group_change_action_state (application->priv->actions, action_name, value); } static void g_application_activate_action (GActionGroup *action_group, const gchar *action_name, GVariant *parameter) { GApplication *application = G_APPLICATION (action_group); g_return_if_fail (application->priv->is_remote || application->priv->actions != NULL); g_return_if_fail (application->priv->is_registered); if (application->priv->remote_actions) g_remote_action_group_activate_action_full (application->priv->remote_actions, action_name, parameter, get_platform_data (application)); else g_action_group_activate_action (application->priv->actions, action_name, parameter); } static GAction * g_application_lookup_action (GActionMap *action_map, const gchar *action_name) { GApplication *application = G_APPLICATION (action_map); g_return_val_if_fail (G_IS_SIMPLE_ACTION_GROUP (application->priv->actions), NULL); return g_simple_action_group_lookup (G_SIMPLE_ACTION_GROUP (application->priv->actions), action_name); } static void g_application_add_action (GActionMap *action_map, GAction *action) { GApplication *application = G_APPLICATION (action_map); g_return_if_fail (G_IS_SIMPLE_ACTION_GROUP (application->priv->actions)); g_simple_action_group_insert (G_SIMPLE_ACTION_GROUP (application->priv->actions), action); } static void g_application_remove_action (GActionMap *action_map, const gchar *action_name) { GApplication *application = G_APPLICATION (action_map); g_return_if_fail (G_IS_SIMPLE_ACTION_GROUP (application->priv->actions)); g_simple_action_group_remove (G_SIMPLE_ACTION_GROUP (application->priv->actions), action_name); } static void g_application_action_group_iface_init (GActionGroupInterface *iface) { iface->list_actions = g_application_list_actions; iface->query_action = g_application_query_action; iface->change_action_state = g_application_change_action_state; iface->activate_action = g_application_activate_action; } static void g_application_action_map_iface_init (GActionMapInterface *iface) { iface->lookup_action = g_application_lookup_action; iface->add_action = g_application_add_action; iface->remove_action = g_application_remove_action; } /* Default Application {{{1 */ static GApplication *default_app; /** * g_application_get_default: * * Returns the default #GApplication instance for this process. * * Normally there is only one #GApplication per process and it becomes * the default when it is created. You can exercise more control over * this by using g_application_set_default(). * * If there is no default application then %NULL is returned. * * Returns: (transfer none): the default application for this process, or %NULL * * Since: 2.32 **/ GApplication * g_application_get_default (void) { return default_app; } /** * g_application_set_default: * @application: (allow-none): the application to set as default, or %NULL * * Sets or unsets the default application for the process, as returned * by g_application_get_default(). * * This function does not take its own reference on @application. If * @application is destroyed then the default application will revert * back to %NULL. * * Since: 2.32 **/ void g_application_set_default (GApplication *application) { default_app = application; } /** * g_application_quit: * @application: a #GApplication * * Immediately quits the application. * * Upon return to the mainloop, g_application_run() will return, * calling only the 'shutdown' function before doing so. * * The hold count is ignored. * * The result of calling g_application_run() again after it returns is * unspecified. * * Since: 2.32 **/ void g_application_quit (GApplication *application) { g_return_if_fail (G_IS_APPLICATION (application)); application->priv->must_quit_now = TRUE; } /* Epilogue {{{1 */ /* vim:set foldmethod=marker: */